Newb Overclocking Questions?

I'm just started overclocking and have a ram question. My ram, which is only Corsair 512x2 Value Select, shows that it's running at 2.5, 3, 3, 8, 2T. Now if i'm overclocking i want to lower or raise these numbers to make everything more stable? I thought you would want to tighten them, make them lower, but i'm confused after reading some stuff if i actually want to raise them since i'm overclocking the cpu.
Also there are two different types of voltages (or at least numbers i can raise one reads like 66 right now the other is a straight voltage, i believe it's at 2.5V right now) for my AGP card, which from what i'm hearing is something i would need to raise as well when overclocking, what's the diffrence between these two? I realize one is a voltage, what's the 66 number one for? thanks

66 stands for 66 mhz which is the speed the agp slot works at.
on some boards you need to set it to 67mhz for the agp lock to work.
Quote
2.5, 3, 3, 8, 2T
if overclocking memory you can try 2.5-4-4-10-2T or 3-4-4-10-2T

Similar Messages

  • K8N Neo 2, newbie overclocking question

    Processor AMD 64 3800 + Venice core
    Zalman Ultraquiet Cooler (big)
    MSI K8N Neo 2 mbio
    Dual Channel Corsair 3200 1 gig (2 sticks of 512)
    X800XL Ati AGP
    Audigy 2 SZ
    Im a harcore gamer and would like to overclock my system to its best.
    What can I overclock and to what speeds?
    CPU
    memory
    AGP
    Roughly wnat cpu speed should I try to reach for?

    Quote from: acacia987 on 21-July-05, 23:13:52
    i have the same board and a venice core 3200+ with no over clocking and my temps are already at 51C at load.... any thoughts? i have the updated bios
    Yes!
    If you have C&Q enabled it is way to high.... reaply the CPU fan, perhaps... use quality goop (AS3 or somthing - I perfer Cheramiqe ... easyer to apply... harder to spell )

  • General place for newbie datamodeler questions?

    With the production release of SQL Developer Data Modeler I'd assume that this forum will draw a bunch of new users. Is there a better place to ask some pretty simple, newbie like questions that won't bother the more seasoned members?
    For instance, I am working in a Rails environment, which has some stringent naming conventions, one of which is that all of the primary key columns are numeric and called "id", with the foreign key linked columns called <table_name>_id.  When engineering a logical model to a relational model, the added foreign key columns are all "id#".  Is there a way I can define a naming rule to keep me from having to redo the relation column names?
    Also, we have a standard set of columns (mostly Rails related) which appear in every table. Can I define a generation rule which automatically includes these tables?
    Thanks

    Thank you. I will try changing that setting.
    IS there a setting which tells the relational model to automatically create pk and fk indexes? I haven't seen one, and manually setting them up is a tedious task. --sw                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • Newbie script question... consecutive numbers with update.

    complete newbie type question... this is also my first post.  ( I am using CS3)
    does anyone have a script which can make it so I can add numbers into the text consecutively.
    for example, if this is my text "the big fat dog sat on the very wide mat, but was then displaced by a unfriendly cat."
    and I wanted to place a number 1, number 2, 3, etc at points in the text so it read, "the big fat dog1 sat on the very wide mat2, but was then displaced by a unfriendly cat3." but later wanted to add another number and have later numbers update themselves, so the text then said, "the big fat dog1 sat on the very wide mat2, but was then displaced3 by a unfriendly cat.4".
    by inserting the three, the previous three became four.
    Has anyone got something which might be useful in this regard.
    Many thanks
    Steve

    i wanted to avoid footnotes as they leave a bar at the bottom of each page.
    i wanted a script to do something similar to footnotes but not much further.
    does anyone have just a simple script that can do what I asked?
    Steve

  • Newbie XSan question - authenticating a computer from XSan Admin

    Hello - I have a very newbie XSan question!
    I have 2 computers that connect to an XSan. 1 I am having no problems with. The other I am unable to connect with.
    When I look in XSan Admin the 2nd computer (the one that is not working) is not authenticated.
    So I click on it and choose Authenticate. I enter what I know is an Admin username and password for the computer I am attempting to connect. The dot next to the computers IP turns green with 3 dots in it and then it turns gray again. It just does not connect.
    What is the problem?
    Is it licensing?
    Thanks
    Taj

    You need a different license ID for each machine, plus the admin machine. Do you have that?

  • Newbie Athlon xp overclocking question

    I have not been in the habit of overclocking processors since the early pentiums (when it was simple multiplier changes), and have a question about modern athlon XP's
    How do I know how much I can overclock the processor (an Athlon XP 2000+) safely, and which parameters on a K7N2G-ILSR board can cause significant damage ?
    What performance increase is likely, and is it worth it  ( I know we sometimes push it just cos we can...)  )
    Is there a newbie guide to overclocking somewhere that i could refer to ?  
    Thanx
    Brummieman

    The MOST interesting question is still not answered though.... what effect does the overclocking have on "true" applications?
    Overclocking my 2100+ on the K7N2-L to 13*166 oviously catapulted my proccessor benchmarks up to the performances between 2400+ and 2800+, depending on the test, the results in 3d-mark went up from 8000 to 8500 for exsample even though you get the same result already with a fsb of 150 due to the lower performance on higher temperatures, but the results in sandra were quite outstanding (compared to the standard settings.
    The use in application I still doubt at present (when do we really use our performance???)
    ripping a DVD to SVCD with DVDx saved me something between 7 and 15mins for exsample, I do not see the use in running my system on the edge for that, as i stated before, I just wanted to see what is POSSIBLE....
    I now run my system with fsb 150 again, which showed the same temperatures (idle and after 10 3dmarks) as with standard 133.
    What did you guys experience?
    Are you sure he should go high enough for the syastem to crash completely so you need the 100mhz setup???
    I`d think slowly rising step by step, run tests watching the temp readings until you get the first faults is safer and you feel like a scientist lol! OK, your methode has the advantage of  the adrenalin kick

  • This Newbie Has Questions

    Hi there. I am a newbie to Apple. I purchased the iBook last month and of course, when the MacBook (which had the features I wanted) came out, I rushed out and got one and I'm very pleased with my purchase - but I have a few "newbie" questions:
    1) Printing on a PC based Linksys seems to be a nightmare. I can't get anything printed on the shared HP 2600N and HP1012 printers. I literally have to disconnect them from the PC and plug the USB directly to my MacBook to print. It seems like there should be a better, easier and MacFriendly way of doing this - anyone have an easy solution?
    2) I'm going to purchase Windows XP so I can run my windows programs on this computer. Does anyone have any pre-installation advice?
    3) I have a blackberry device that worked fine with my iBook, but does not work with my MacBook - any suggestions or is there a software compatibility patch?
    4) I transferred everything from my old Mac to my new Mac with no problem. How can I migrate my contacts from Entourage to the Address Book?
    5) I notice that sometimes the MacBook "stalls" or doesn't work fast in some functions...is it just me - I expect the machine to jump quickly...but sometimes I get that annoying pinwheel when opening programs.
    Thanks for your help!

    1) Printing on a PC based Linksys seems to be a
    nightmare. I can't get anything printed on the
    shared HP 2600N and HP1012 printers. I literally
    have to disconnect them from the PC and plug the USB
    directly to my MacBook to print. It seems like
    there should be a better, easier and MacFriendly way
    of doing this - anyone have an easy solution?
    The problem is probably a driver issue.
    Printing to a printer on a XP PC from a Mac running 10.4.x
    http://www.ifelix.co.uk/tech/3015.html
    You may need to use a third-party driver such as the HPIJS drivers or the Gimp-Print drivers, but this is not the case with all printers.
    2) I'm going to purchase Windows XP so I can run my
    windows programs on this computer. Does anyone have
    any pre-installation advice?
    Ensure you get a full version (not an upgrade version) and it comes with XP SP2 already.
    Do not install Boot Camp on a critical machine and make regular backups of your data, this is beta software and there are bugs and issues.
    5) I notice that sometimes the MacBook "stalls" or
    doesn't work fast in some functions...is it just me -
    I expect the machine to jump quickly...but sometimes
    I get that annoying pinwheel when opening programs.
    Are these Universal or PPC only applications?
    iFelix

  • Newbie wireless question (slightly off-topic)

    I didn't want to post this here as it's not entirely an Airport-specific question. I posted this to the iBook forums, but nobody there has answered so my apologies if this is not welcome here. (Any moderators can remove it if that's the case.)
    I've been using computers extensively for over a decade, but I'm a total newbie to wifi. I just set up a wireless network in my house and would appreciate some advice/feedback.
    My main concerns are whether or not my network is reasonably secure. I know there is no such thing as perfect security, but I don't know if what I've done is good enough or not.
    I don't have an Airport base station, but I do have a D-Link Airplus G and an Airport card in my iBook. I have WEP set up on the router and I have enabled MAC filtering, listing only my desktop and my iBook, excluding all others from the network.
    I'm fairly certain that nobody in my neighborhood is going to get into my machines this way or be able to sniff my network data stream, but am I right in assuming that nobody can "piggyback" on my Internet connection too? Presumably, if everyone but my own machines are MAC-filtered and kept out, then the Internet connection is also protected. Is that how it works?

    WEP and MAC filtering are better than nothing, but you can do better. These are my suggestions:
    1. Use WPA with a pre-shared key (PSK) and TKIP encryption on your Netgear router, along with an alphanumeric passphrase of at least eight characters not found in any dictionary. The equivalent setting on your Mac is "WPA Personal". Unlike WEP security (which an expert can crack in under half an hour), WPA security is currently unhackable by any practical means as long as you use a non-dictionary passphrase. One last point - WPA security requires all your wireless Macs to be running MacOS 10.3 or newer.
    2. MAC filtering is (these days) essentially useless as a wireless security method. Using "packet sniffing" of traffic on your wireless network to find out what MAC addresses are used by computers on your network, and a PC that allows its MAC address to be cloned so that it is identical to the MAC address of one your own wireless computers (which is possible with most PC wireless network adapters) even an amateur hacker can defeat MAC address filtering in minutes.
    By the way - I don't think your posted message here is off topic. In my opinion, the Airport discussion forums are the best place to post any questions related to usage of wireless networks. Questions of this nature are virtually never specific to any Mac model.

  • Newbie saving question in Illustrator

    I know this is a newbie question. I designed a logo in Illustrator. Is there a way to save just the logo for exporting into other applications (ie Pagemaker or Photoshop) without having the white artboard?
    Thanks
    Brad

    I don't know Pagemaker but with Photoshop I simply select all, copy and then paste in Photoshop - transparency will be maintained. If you paste as a Smart Object you retain the ability to edit the Illustrator artwork in Illustrator and update the PS file.

  • Dumb newbie hardware question! :)

    Hi folks,
    I'm new to the world of the blackberry and am just about to take the plunge with an unlocked sim-free BB Bold to use in the UK on Vodafone. I have read about the software differences between BIS and BES and would be going for a BIS set-up. My dumb newbie question is does the hardware come in BES and BIS versions or not?
    Many thanks in advance and feel free to mock my foolishness
    Solved!
    Go to Solution.

    hello, about BIS and BES it's explained on the website but it's clear that if someone sums it up for you it will be easier...
    so BES is a type of contract between a company and Blackberry. The company IT buy computers, put Blackberry servers, and buy a fleet of Blackberry Devices for the people in the company to use them and get email through the Blackberry servers.
    BIS is a type of contract between a common person and a carrier. The consumer goes to the carrier, and buys a Blackberry device, and a BIS plan that will enable him/her to :
    phone/sms/mms
    receive emails that have been configured on the BIS site
    do data things if you subscribe to (like browse the web)
    You can buy a Blackberry from a carrier that has a deal with RIM (the company that sells Blackberries). Or you can buy a blackberry alone, and then go and contact a carrier that has a deal with RIM.
    phone/sms/mms
    receive emails that have been configured on the BIS site
    do data things if you subscribe to (like browse the web)
    The search box on top-right of this page is your true friend, and the public Knowledge Base too:

  • Overclocking Questions

    Hello all,
    I know i'm going to ask some n00b questions about overclocking but if someone could give me some answers i would be grateful.  
    So here are my puters specs:
    MSI K7N2 Delta L mobo
    AMD Athlon XP 2600+ @ 2.08Ghz FSB 333Mhz
    512MB Ram @ 333Mhz Generic Dual Channel (2X 256MB)
    Heatsink Thermaltake VOLCANO 11 – Xaser Edition
    What should i do to overclock the CPU without unlocking it (if it is possible).
    Can i do it only by altering the FSB speed?
    Also what should i do with the RAM and the AGP, PCI Bus?
    Thank you in advance and Merry X-mas to all  

    Where do I access all of these OC options (like FSB:RAM ratios, 'Performance Mode', and all the other crazy stuff this board has?  And don't tell me the BIOS, I've been there, done that.  Do I need to update my BIOS?  (I'm using the one that came with the 875P)  
    Here we go:
    2.4 GHz Pentium 4 processor with 800MHz FSB and HT
    Sapphire Atlantis 128MB Radeon 9600Pro GPU
    512MB(2x256) Kingston HyperX DDR400 RAM
    MSI 875P Neo 2 Motherboard
    120GB Serial ATA Maxtor Hard Drive
    Creative Labs SoundBlaster Audigy2 Sound Card
    Creative Megaworks 5.1 THX surround sound
    16x LiteOn DVD drive
    48x24x48 LiteOn CD-RW drive
    400 Watt Foxconn Power Supply
    19" Viewsonic P95f+ CRT
    Chieftec Black Case
    Logitech MX700 Rechargeable Wireless Optical Mouse
    Logitech Elite Multimedia Keyboard
    Cyberpower 825AVR UPS
    And a floppy drive!
    Cooling is stock, but I have a bunch of case fans and good air circulation.
    As far as overclocking, I'm looking to go for about 3GHz (It sounds reasonable to me).
    Thanks.

  • NEWBIE SOA Question:Appl Development for SOA

    This question may have been answered elsewhere; if so, my apologies.
    As a newbie to SOA, I am trying to wrap my head around the question of how app. development for SOA differs from traditional models. For example, non-SOA environments there are few external considerations when coding a process,
    but in SOA environments, I understand everything is a service.
    Can someone provide a few code snippets as to how they would look in each environment?
    I have read through several documents on SOA and have done the SOA tutorial, etc. but I have yet to see a side-by-side comparison of application code in SOA and non-SOA environments.
    How would an architect plan the translation and mapping of business objectives and functional requirements into a technical solution for SOA, architecting the SOA solution ?
    I would really appreciate any pointers (links to articles, etc.) in this direction. Thank you.
    Gordon

    Hello Gordon,
    SOA (Service Oriented Architecture) - as the name indicates, it's design is based on services. SOA is another integration technique which is used for small scale integration. SOA is an approach to have software resources in an enterprise available and discoverable on network as well defined services. Each service would achieve a predefined business objective and perform discrete units of work. The services are independent and do not depend on the context or state of the other services. They work within distributed systems architecture.
    Few links which may help you in understanding SOA and it's design patterns -
    http://blogs.oracle.com/jeffdavies/2008/10/architects_dictionary.html
    http://www.oracle.com/technology/tech/soa/mastering-soa-series/part1.html
    http://www.oracle.com/technology/tech/soa/mastering-soa-series/part2.html
    http://www.oracle.com/technology/tech/soa/mastering-soa-series/part3.html
    http://www.oracle.com/technology/tech/soa/mastering-soa-series/part4.html
    http://www.oracle.com/technologies/soa/docs/soa-bp-design-patterns-whitepaper.pdf
    http://www.oracle.com/technology/pub/articles/erl_soa_design_patterns_app_sequences.html
    http://www.oracle.com/technology/oramag/oracle/09-sep/o59architect.html
    http://www.oracle.com/technology/pub/articles/tech_arch.html#soa
    Regards,
    Anuj

  • Newb HD questions...?

    I'm a newb to HD and we've just got funding for a HD camera. The boss bought a Panasonic AG-HMC150P.
    The question is about recording mode, in "p" or "i". Currently it is set for 1080/60i, its top setting. But it has a 1080/30p too.
    Our products will be made to view on a TV screen ntsc, and a computer screen.
    Is the "i" setting the best for us? ie: is there any advantage in us using the 30p setting?
    Also, I have FCP6 and a colleague has FCP5 on a less powerful machine.
    Whats the best way to hand him newly captured HD footage? Is it to render it out using H264 on my machine before passing it over?
    We are hoping funding for software upgrade/machine will come soon for him.

    Well, the short answer is "i" (interlaced) is only for display on older CRT "tube" televisions. "p" (progressive) is for display on computers and flat screen televisions. Typically you should try to stay progressive these days. 60i can be useful if you are going to slow-mo any shoots.
    Do NOT convert your files to H.264 to send to another edit. H.264 is not a good codec for editing, use it for distribution of edited material only.
    For sharing with FCP5 on a slower computer, consider using DVCProHD.

  • Newbie audio question--help please...

    I recently recorded/captured video from Canon HV30 and unfortunately found that only Left audio channel was recorded..Right channel in non-existant. How do I duplicate the audio track from Left to Right so that both tracks are played in sync?
    I appreciate your help on this newbie question!

    When the left channel is filled you use the Fill Left effect
    The Fill Left effect duplicates the left channel information of the audio clip and places it in the right channel, discarding the original clip’s right channel information.
    Instead of putting the effect on each clip use the Audio Mixer.

  • I have an OVERCLOCKING QUESTION

    i have a 2.8 overclocked to a 3.2. i am using pc3200 ram (400mhz). i have it set to run at a 5:4 ratio, i have my ram frequency running a 333. when i up my bus from 200 to 230 and reboot, my bios tells me my ram is running at 383 mhz. all the windows programs (clockgen,sandra) are telling me different. they say my ram is at 184mhz(184x2=368). windows apps are reporting 184 or (184x2). my question is, am i running at 383 or 368. my sandra scores are normal for my ram. which is telling the truth my bios, or the windows programs? also is there a way i can up my ram and not my FSB, any overclock programs allow that?

    Quote
    which is better getting the extra ram boost or getting the extra processor boost?
    There is no right answer. It depends on what your software benefits by. Try it both ways, compare the benchmarks, and then try real applications that you use to see if the response is noticeable. If you can't tell the difference I would go with the 1:1 ratio.
    bejon2000 asked if you locked your AGP/PCI clock. When running in performance mode you can go to this clock setting, even though it is greyed out, hit enter and change it. You have to do this after adjusting the FSB as it also adjusts the AGP/PCI setting.

Maybe you are looking for