Newb Question: How do I extract an image?

All I have is a pretty simple .swf file, just a series of
static photos, and Flash Professional 8. All I want to do is pull
one image out and save as a jpeg. The animation keeps opening in
the stand-alond player, not the editor. How hard can this be?
Thanks!

Currently, Adobe Reader Touch (Windows Store app with "Modern" UI) does not support copying or extracting images from a PDF document.

Similar Messages

Newbie Question: How much computer do I need?

Newbie Question:
I would like to use MainStage 3 in a live performance environment to play bars, parties, etc. I'm not looping, using it to playback recordings, processing outboard equipment or vocal processing. I want to stop carrying Rolands, Nords, Korgs, etc and get to a controller and a rack with a Mac Mini in it.
I tested a download of Mainstage 3 on my home Mac Mini (late 2012, 3.5 Ghz i5, 4GB RAM, 500GB drive) and it seemed to run fairly well. $30 well invested so I trekked forward... I purchased a Mac Mini (late 2009, 2.52GHz Core 2 Duo, 6GB RAM, 128GB SSD) for $200. I started to do more elaborate keyboard setups to see how the CPU would hold up. It typically runs from 30% to 50% of capacity (CPU and Memory) It actually boots and runs better than the i5. I hear the occasion gitch, but it actually seems to be getting better in time (or I'm rock and roll deaf.
I got a rack, an Airport Express, a Radial USB interface and a Nektar Panorama P6. It's starting to get expensive, but I'm emboldened by the actual quality for the sound and the flexibility of arranging for live performance. What used to take me two and three keyboards to play, I can now fit on one performance patch.
OK, now the question... am I at the limits of this little Core 2 Duo? Should I upgrade the i5 with more RAM and a bigger SSD and use that? Should I get a new(er) i7 and bite the $1,500 bullet for the additional RAM and SSD?
I see that most of you are running pretty nice Macbook Pros with i7 and lots of everything. My needs are modest; am I OK?
BTW, I want to run a Mac Mini in a box because I don't want to carry a laptop out in the open. If I was doing bigger shows I wouldn't care but I play some rowdy bars and constantly have folks hanging off me while I'm playing. It's fun, but hard on gear. If you can't drop it or dip it in beer, it won't last long where I work.
Matt Donnelly

Rule of thumb: newer and faster is better. But, depending the complexity of your needs you may be OK with an older Mac. Some glitches that happen in a live performance are due to loss of communication with USB or Firewire inputs, so make sure they're secure. I recently upgraded from a 2010 Mac Mini 2.6 dual core with 16 GB RAM, which was used live for nearly four years, to the latest Mac Mini 3.0 i7 with 16 GB RAM and a 500 GB SSD. I was getting an occasional stuck note with the older one. The new one is rock solid. Some of my patches may have up to a dozen channel strips mapped to three keyboards. The Mini is mounted in a rack next to a MOTU Ultralite Hybrid. It is a good idea to map a panic button on your keyboard to controller # 123(all notes off). Also, you might want to invest in a battery backup power supply(APC, Cyberpower, etc.-$40-$60) to protect your Mac against power loss, which can damage you hard drive.

Newbie question - how to save images out of an fla file

I have what I'm sure is a very basic flash question. I have a flash movie (swf) and the accompanying fla file. I can open the fla file, and see all the images used in the file (symbols in the library), but how can I export or save one of these images separately from flash?

you can right click, copy an image and then paste it into your choice of photoediting software.

Newbi Question: How does one create a similar page to this using APEX 3.1?

Hi,
I am trying to create a help document with screen shoots inside our APEX web application and I am hamstrung by the type of Region and Item objects available to me. When I tried to create HTML region I was limited to how much html characters I can put in the source. When I look into the item menu nothing seems to allow me to stick in large chunk of HTML code either.
A little searching on this forum and I came across this page: http://www.oracle.com/technology/obe/apex/apex31nf/apex31blob.htm#t
It is exactly the type of page I want to create with lots of text and screen shots and I presume that it is built within APEX? So my questions is: How did they do this? Did they use tools available within APEX or some external tool? Was all this outputted using BLOB and Htp("") and PL/SQL? I am trying hard to avoid having to do that.
I was also unable to stick in an in image into my page using instruction from http://download.oracle.com/docs/cd/E10513_01/doc/appdev.310/e10499/ui.htm#CBBHGJCH which left me pretty frustrated. (external amazon gif worked).
Thanks for any help,
Wayne

Wayne,
I am glad that you got images to display. I am not sure what kind of html report you want to display, there is a limit of number of characters in a region its 32767 characters, so if you want to display large html file you can create html region with no template and limit each region to 30,000 characters and create as many region as you want.
If you want to display data from any table ( as per the first url) you can create SQL reports, something like
select ename
     , deptno
     , sal
     , case
          when ename = 'SCOTT' then '<img src="#WORKSPACE_IMAGES#us_flag.gif" alt="Image Title">'
          when ename = 'SMITH' then '<img src="#WORKSPACE_IMAGES#chants.gif" alt="Image Title">'
          when ename = 'MARTIN' then '<img src="#WORKSPACE_IMAGES#cloche.gif" alt="Image Title">'
          when ename = 'MILLER' then '<img src="#WORKSPACE_IMAGES#chandelles.gif" alt="Image Title">'
          when ename = 'JONES' then '<img src="#WORKSPACE_IMAGES#shoe.gif" alt="Image Title">'
          else '<img src="#WORKSPACE_IMAGES#hallo.gif" alt="Image Title">'
     end image
from empThanks,
Manish

Help! Question, how do I move an image along with the text

New to InDesign and I'm creating a how-to brochure of sorts for my business and as I'm making edits/updates I realize I need to insert another picture at the beginning of the document. I already have a bunch of other images throughout the document in specific places that need to remain with the text they are wrapped around. If I try to insert a new picture at the beginning of the document and wrap the text, all of the text moves down throughout the document but the images do not. That means none of the images are in the correct place anymore. Is there a way to make sure if I insert a new picture or text at any place in the document all of the following images move with the text they are by? I'm sure its a simple fix, I just can't figure it out. Thanks.

Look into anchored objects.

Newbie question: How do I set the input for a series of audio recordings to be different, if I only have a 2 channel interface?

I am using a 2 channel interface (Apogee Duet) and I can record a voice and guitar track fine. My question is how do I record a third audio track after the fact? It seems when I attempt to record an additional track, say bass for example, Logic treats it as though it is on input 1 or 2 (which hardware wise it is of course) and merges them in a sense. I don't know how to make it a seperate independant track, despite the fact that it was recorded through an input that I also used to record something else on a diferent track.
Thanks in advance, I very much appreciate any help.

Thanks for the response. I know it sounds ridiculously basic. Yes I am creating a new track and selecting it. The third track appears in the arrange window, but changes to, for example, the third track affect the 1st. Doesn't matter if it's a 1/4 inch guitar or XLR mic. Yes I'm listening to the headphone output from the Duet.
I think the fundamental problem is my not understanding something about mono/stereo, or prehaps input and output settings. I just can't seem to find the appropriate controls/settings.

Simple question: How to set a different image to each side of a 3D cube?

Hi all,
I'm very new in the use of Java 3D and I would like to know how to set, in a 3D cube, for each side a different image.
Currently I've the code to set an image as texture of the cube, but it applies the same image to all the sides. However, I would like to use different images for each side.
This is my code: http://pastebin.com/sexBx57K
Any clue?
Thanks!

I think I worked it out.
I just have to set the JAXP parser
Q. How do I use a different JAXP compatible implementation?
The JAXP 1.1 API allows applications to plug in different JAXP compatible implementations of parsers or XSLT processors. For example, when an application wants to create a new JAXP DocumentBuilderFactory instance, it calls the staic method DocumentBuilderFactory.newInstance(). This causes a search for the name of a concrete subclass of DocumentBuilderFactory using the following order:
1. The value of a system property like javax.xml.parsers.DocumentBuilderFactory if it exists and is accessible.
2. The contents of the file $JAVA_HOME/jre/lib/jaxp.properties if it exists.
3. The Jar Service Provider discovery mechanism specified in the Jar File Specification. A jar file can have a resource (i.e. an embedded file) such as META-INF/services/javax.xml.parsers.DocumentBuilderFactory containing the name of the concrete class to instantiate.
4. The fallback platform default implementation.

Newbie question: how to monitor cluster disk drive free space

ok folks, it is a really painful process for me to use SCOM2007R2 and I figure it might be easier if I start to ask concrete questions.
1. I have a cluster server and I know some drives have only 10MB and they are not changing at all as I fixed them. How can I use Monitor/Rules so that I could receive Alert? I was told by our admin that SCOM only got triggered if status got changed
In my case, since the drive space will never get changed (fixed to 10MB left), I will never receive alert???
cheers
--Currently using Reporting Service 2000; Visual Studio .NET 2003; Visual Source Safe SSIS 2008 SSAS 2008, SVN --

"Logical disk free space" is the monitor that will be monitoring this.
Yes, SCOM will send alerts only when the Mbytes and % values of the free space ; mentioned in the monitor are met. You can configure this monitor by setting up correct Mbytes and % values to change the state of this monitor and thereafter you
will receive the alerts from this monitor.
Hope this helps.
Thanks, S K Agrawal

How can I extract an image from a website using HtmlAgilityPack and XPath? (C#)

Hello, everyone. I have been making a Comic Viewer in C#, and I'm stumped on how to actually load the comics. I installed HtmlAgilityPack
and I have the XPath for the image I need, so I did some research and added the following code:
string url = "http://www.gocomics.com/bignate/2015/04/10";
HtmlWeb web = new HtmlWeb();
HtmlAgilityPack.HtmlDocument doc = web.Load(url);
var imgsrc = doc.DocumentNode.SelectSingleNode("//*[@id=\"zoom_content\"]/img").Attributes["src"].Value;
pictureBox1.ImageLocation = imgsrc;
However, it throws an unhandled exception and the imgsrc ends up null. What am I doing wrong?

Hi Ethan,
As far as I know, Use the //img[@src] as XPath in selectNodes will work.
HtmlNodeCollection imgs = doc.DocumentNode.SelectNodes("//img[@src]");
After get the image Value, you should convert it to image in order to show in
pictureBox1 control.
Here are the code, I have already test on my side, It works as expected.
private List<string> retrieveImages(string address)
System.Net.WebClient wc = new System.Net.WebClient();
List<string> imgList = new List<string>();
HtmlAgilityPack.HtmlDocument doc = new HtmlAgilityPack.HtmlDocument();
doc.Load(wc.OpenRead(address)); //or whatever HTML file you have
HtmlNodeCollection imgs = doc.DocumentNode.SelectNodes("//img[@src]");
if (imgs == null)
return new List<string>();
//foreach (HtmlNode imgg in imgs)
// if (imgg.Attributes["src"] == null)
// continue;
HtmlAttribute src = imgs[0].Attributes["src"];
imgList.Add(src.Value);
//Do something with src.Value such as Get the image and save it to pictureBox
Image img = GetImage(src.Value);
pictureBox1.Image=img;
return imgList;
private Image GetImage(string url)
System.Net.WebRequest request = System.Net.WebRequest.Create(url);
System.Net.WebResponse response = request.GetResponse();
System.IO.Stream responseStream = response.GetResponseStream();
Bitmap bmp = new Bitmap(responseStream);
responseStream.Dispose();
return bmp;
In addition, if you still have issues about HtmlAgilityPack, since it is a 3rd open source class. You can consider posting it in CodePlex forum for more efficient responses.
https://htmlagilitypack.codeplex.com/
Now I have moved your thread to "off-topic" forum. Thanks for your understanding.
Best regards,
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Newbie Question: How to organize program with lots of components

Hi,
After struggling through the basics of Swing programming, I've finally got my application to look like what I want. Now I have to deal with all the inputs and variables (which is the hard part ^_^).
I wonder how people usually organize numerous components and action listeners? I have a lot of fields that have to be synchronized frequently with a hardware device, and they are also adjustable by a number of menus.
Currently I've just stuffed all the listeners and actions as inner classes in my main display frame. I am hoping to create a separate class that can manage all these actions, or a more elegant way to organize my program.
For now I'm reading up on MVC (Model View Controller). Is that a good place to start? Or how about XML?
I know this isn't a very specific question, but I'd appreciate a push in the right direction ^_^
Thanks!
Cindy

I would look at MVC and its part - Observer pattern.
Denis Krukovsky
http://dotuseful.sourceforge.net/
http://dkrukovsky.blogspot.com/

Newbe Question: How to get the Workflow Name to a WS* number?

Hi All
Just a short question:
I have a whole bunch of WS9*** numbers and now I am supposed to find the corresponding WorkFlows in a system (from a business perspective). The problem is that I have no clue on how to do this as I am reale new to WorkFlows.
Is there anybody who can help me out?
Thanks,
Regards,
Minima

Hello,
If you have access to PFTC_DIS, choose "Workflow template" for Task type and do a list of values on the Task field (which has the WS* number, but without the WS). This will give you the full list.
If you don't have access to PFTC_DIS, but do have access to SE16 or SE12, look in table
HRS1000 where OTYPE = WS and LANGU = EN.
regards
Rick Bakker
Hanabi Technology
Edited by: Rick Bakker on Dec 15, 2008 12:58 PM

Newbie Question: How to find Forms/Reports Server Version

Hello,
Is there a way to easily find out what is the patchset installed for the Forms and Reports Server. I know that presently using AS 9i rel1 and Forms 6i, but how do you find out more information on the installed patches on Windows? thanks

Please see these threads.
how to find the developer version
Re: how to find the developer version
Report Builder version
Re: Report Builder version
Form patch set level
Re: Form patch set level.
Always search the forum before posting similar questions.
Thanks,
Hussein

Newbie questions - How do I log in & what's the repository

1) After I install Oracle 9i lite, and start Sql*plus I'm stuck - becuase I have no idea what to use for the UserID/Password, etc., and can find NOTHING in the HTML doc/release notes to get me over this most basic requirement.
2) What's the repository, and why do I need it?

Thanks for sending over the information.
You did create a second Skype account based on your Microsoft account email (NB: That's not necessarily a @live.com or @outlook.com email address, since you can sign up for a Microsoft account using any email address as identifier).
To resolve this situation please:
Sign in with your Microsoft account at www.skype.com/go/myaccount
Delete this Skype account based on your Microsoft account by following the "unlink" instructions: https://support.skype.com/en/faq/FA12211/how-do-i-unlink-my-skype-account-from-my-microsoft-or-faceb...
After you've done this please re-enter the password recovery flow for your Skype account and use your email address again. This time around - since no Skype account based on that email as Microsoft account exists - you should be able to recover your password.
Follow the latest Skype Community News
↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

Newbie Question how to burn imovie to a dvd

Hello everybody i have a quick question. I can't figure out how to burn a imovie project to dvd. Looked through all the menus share menu in particular. Couldn't find anything to export to a dvd. Searched through the help and i couldnt find anything. Thanks

Hi
I would try:
• Share -> down to second line Media-publisher (?)
• I would select Large
Then close iMovie
Open iDVD and see if I can localize the movie under Media.
Yours Bengt W

Newbie question: how do I create a bokeh effect in PSE 8?

I am having trouble getting a blurred background effect in a portrait. Could someone please tell me how to do it. I've attached the example I am working on. All I want to do is to blur down the bricks behind the man's head, but I cannot seem to do it by creating a duplicate layer and then using the blur filter. Thanks for any help you can give.

The steps you describe are correct, so it sounds like a problem with the program. Is this a new problem or has it always been that way? Do you have this problem with other Blur tools or other Filters, or just the Gaussian Blur? You might want to post another forum topic titled "problem with Gaussian Blur"; more users are likely to read and respond to it.
You might try resetting the preferences file. This often corrects PSE problems which pop up for no apparant reason. I don't know if this works in PSE8, but there is how to do it in previous versions: Press and hold Option-Command-Shift immediately while starting PSE. The timing is critical; you may have to try this several times. A dialog box will pop up with the question "Delete the Adobe Photoshop Elements Settings file?" (or similar message depending on the PSE version). Click YES.
Here are 2 sites which address the corrupted preferences file:
http://www.northlite.net/ps/prefs.htm
http://www.photokaboom.com/photography/learn/Photoshop_Elements/troubleshooting/1_troubles hooting.htm#Preference

Newb Question: How do I extract an image?

Similar Messages

Maybe you are looking for