Newbee.. Need HELP G4 quicksilver

Hi!
I'm a newbee to Mac system. Can someone please guide me on how to connect my G4 to the internet using AirPort. My Wireless router is a Linksys G Broadband 2.4. I'm using a broadband connection for my internet..
Thanks in advance..
Power Mac g4 QuickSilver

i also have a partition on my harddrive but this effects both sides isn't that a sign of hardwear problems?
i will try getting a new battery.
i can't just pull the pull every time because just turning it off from the button makes my mac act funny on start up the res on my screen goes out of wack, the cd drive won't read it just keeps spining i'll try a hardwear check but i can't start up from the cd drive i hold down "c" at startup but as long as i hold it down it won't startup. it will only start up went i release the "c".

Similar Messages

Need help with Quicksilver not starting up

Hi, this is my backup computer. It doesn't get a lot of use since I have a Mac Pro, but I still want to have it up and running again. The symptoms are when I press the power button it appears to come on, the fans inside power up but the white power button on the front doesn't stay lit up. Also there is no start up chime sound when it is turned on.
I have opened her up and removed and checked each memory stick. I realize it could be one of several things. I am hoping it is just the battery. That would be a cheap and easy fix. If it a bad logic board or something along those lines it wouldn't be worth repairing. I just wanted to hear some more thoughts on some other possibilities I might not have considered.
It is a 2001 Quicksilver 867 upgraded with a dual core 1.5GHz. Thanks in advance for any tips

If the Mac has not been connected to AC power for a while, it's most likely that the internal PRAM battery has discharged & needs replacement.
Check this site for battery part numbers and sources. https://sites.google.com/site/macpram/mac-pram-nvram-cuda-pmu-battery-tutorial Mac PRAM, NVRAM, CUDA/PMU & Battery Tutorial
Some things to try.
* Reset the PMU http://support.apple.com/kb/ht1939
* Resetting the Logic Board - Resetting the logic board can resolve many system problems. Whenever you have a unit that fails to power up, you should follow this procedure before replacing any modules.
1 Unplug the computer.
2 Press the Power On button on the front of the unit.
3 Open the side access panel.
4 Remove the battery from the logic board.
5 Wait at least 10 minutes before replacing the battery.
6 Make sure the battery is installed in the correct +/-
direction.
7 Reassemble the computer and test the unit.
* Resolve startup issues and perform disk maintenance with Disk Utility and fsck
http://docs.info.apple.com/article.html?artnum=106214
 Cheers, Tom

Newbee needs help

Hi. I'm having problems with my i-pod shuffle not showing up on my itunes. I've tried re-installing and trouble shooting to no avail. Both times I've reinstalled everything goes smoothly until I open itunes and I get a error message in my toolbar saying that part of the program was lost or could not be installed. Something about "ipod-control". I'm guessing this is why I don't get the ipod options button on my itunes source list.
Here's the skinny.
No highspeed usb port on my comp.
Comp. does recognize ipod as "mass storage device" and as ipod(H).
ipod is charged but it just sits there and blinks orange all of the time.
PLEASE HELP!! I'm ready to give up on this ipod thing.

I would try downlading the latest Itunes http://www.apple.com/itunes/download/3.html and Ipod updater online

Newbee Needs Help. BT Home Hub Wireless connectio...

Dear Forum,
As a newbee I thought I would ask the masses. I have a black home hub 2. It is hard wired to a number of PC's in the house, plus it also provides a wireless connection reliably most of the time. Occationally, every day/other day it refuses to provide a reliable IP address. My wireless is set as follows:-
Channel 11, WEP, 64 Bit.
Current firmware
Version 8.1.H.J (Type A)
Last updated
08/12/09
I can attach fine normally, but then it fails to connect (on a know working machine) after a reboot. I get the error "Limited or no Connection". This occurs with Pc's running VISTA, and Macs?
The only resolution I have found is to RESET the hub. Then all devices attach fine. If I disable wireless on my portable and re-enable it, it also fails. Once in a failed state its only resolution is to RESET.
Can advice?
Many thanks
Mike

you might want to change the wireless settings of the hub to 802.11 b/g to see if this makes a difference, also can try change the wireless channel as well to see if that makes a difference

Need Help regarding a simple mobile application

Hello friends,
I am bit newbee to J2ME technology.
I have basic understanding about MIDLETS.
Friends,i am designing an instant messenger using midlet.
Could anyone send some idea's of how to design a CHAT application.IF some one can give a small code of implementing it could be really helpful....
Looking for your help!!!
Thanks In Advance !!!
Regards,
RAHUL

You have been no help but I will post again hoping someone else can reply....
Here is a more exact detailing of what I am trying to do:
I am hosting a text file here:
http://www.geocities.com/biocx/entertainer.txt
And when I open up MMAPI Demo and go to simple player, and then URL and paste this in, it plays the simple rtttl/midi file. It is doing this through RingToneConverter.
Now all I want to do, and this is the part I need help with, is while it is playing, I want the notes to be displayed on screen. Can anyone help me with this! I have tried and every time is gives me a problem saying that the RingToneConverter Class isn't abstract and I cannot print to screen...
If someone could help me with this, it would be greatly appreciated.
Thank you,
Mike

Need help to develop Pythagoras theorem-

Hi i need help to develop proofs 2,3,4
of pythagoras theorems in java as demonstrations
These are applets can anyone help me with it or give me an idea of how to go about developing it -
the site is the following
http://www.uni-koeln.de/ew-fak/Mathe/Projekte/VisuPro/pythagoras/pythagoras.html
then double click on the screen to make it start

Pardon my ASCII art, but I've always liked the following, simple, geometric proof:
     a                   b
---------------------------------------+
|       |                                |
a|   I   |              II                |
|       |                                |
---------------------------------------+
|       |                                |
|       |                                |
|       |                                |
|       |                                |
|       |                                |
b| IV   |              III               |
|       |                                |
|       |                                |
|       |                                |
|       |                                |
|       |                                |
|       |                                |
---------------------------------------+It almost goes without saying that I+II+III+IV == (a+b)^2, and II == IV == a*b,
I == a*a and III == b*b, showing that (a+b)^2 == a^2+a*b+a*b+b^2.
I hope the following sketch makes sense, stand back, ASCII art alert again:     a                   b
---------------------------------------+
|               .             VI         |
|     .                 .                |a
| V                               .      |
|                                        +
|                                        |
|   .                                    |
b|                                     . |
|                                        |
|                  IX                    |
| .                                      |
|                                    .   |b
|                                        |
+                                        |
|      .                                 |
a|               .                  . VII |
| VIII                   .              |
---------------------------------------+
                 a                    bThe total area equals (a+b)^2 again and equals the sum of the smaller areas:
(a+b)^2 == V+VI+VII+VIII+IX. Let area IX be c^2 for whatever c may be.
V+VII == VI+VIII == a*b, so a^2+b^2+2*ab= c^2+2*a*b; IOW a^2+b^2 == c^2
Given this fundamental result, the others can easily be derived from this one,
or did I answer a question you didn't ask?
kind regards,
Jos

I need help to find and open a job app that I exported, was able to fill out and sign and saved and now can't open it? What did I do wrong?

I need help to find and open a job app that I exported, was able to fill out and sign and saved and now can't open it? What did I do wrong?

What file format did you export it to?

Need help to open audios attached in a PDF file

Hello
I just need help. I have ordered a reviewer online that has audios and texts in a pdf file. I was told to download the latest adobe reader on my computer. I have done the same thing on my ipad mini. I am not so technical with regards to these things. Therefore I need help. I can access the audios on my computer but not on my ipad.
I want to listen to audios with scripts or texts on them so i can listen to them when i am on the go. I was also informed that these files should work in any device. How come the audios doesnt work on my ipad.
Please help me on what to do.
Thanks

Audio and video are not currently support on Adobe Reader. :-<
You need to buy a PDF reader that supports them. My suggestion is PDF Expert from Readdle ($US 9.99)

Need help to open and look for file by name

Hi,
Im needing help to open a folder and look for a file (.txt) on this directory by his name ... The user ll type the partial name of file , and i need look for this file on the folder , and delete it ....
How can i look for the file by his name ?
Thx =)

Hi ,
Sry ,, let me explain again ... I ll set the name of the files in the follow order ... Name_Serial_date_chanel.sxc ..
The user ll type the serial that he wants delete ...
I already figured out what i need guys .. thx for the help ^^
I used List Directory on advanced IO , to list all .. the Name is the same for all ... then i used Name_ concateneted with Serial(typed)* .. this command serial* ll list all serials equal the typed , in my case , ll exist only one , cuz its a count this serial .Then i pass the path to the delete , and its done !
Thx ^^

I need help, my ipod touch is not recognized by windows as a harddisk

i need help, my ipod touch is not recognized by windows like a memory card or a harddisk.
i would like to transfer the files from pc to my ipod touch without useing itunes.
as i see theres some people here that theires ipod touch are recongnzed as a digitl camra, mine is reconzied as nothing, some help plz.
Message was edited by: B0Om

B0Om wrote:
ok but i still dont understed, only my itnes recongnize my ipod, when i go to " my cumputer, it dosent show up there, not even as a digital camra
Your Touch is working correctly. Currently, without unsupported third party hacks, the Touch has NO disc mode. It will only show up in iTunes.
how do i put programes and games in my ipod touch
Right now, you don't. The SDK is scheduled to be released in Feburary. Then developers will be able to write programs that will be loadable.

Weird error message need help..

SO.. i havent updated my itunes in a while because i keep getting this weird message.. it comes up when im almost done installing the newest/newer versions of itunes. it says
"the feature you are trying to use is on a network resource that is unavailable" "click ok to try again or enter an alternate path to a folder containing the installation package 'iTunes.msi' in the box below"
now when ever i choose a file from the browse box it replies with this message "the file 'xxx' is not a valid installation package for the product iTunes. try to find the installation package iTunes.msi in a folder from which you can install iTunes."
no idea need help thanks
~~~lake
Message was edited by: DarkxFlamexCaster
Message was edited by: DarkxFlamexCaster

+it comes up when im almost done installing the newest/newer versions of itunes. it says+ +"the feature you are trying to use is on a network resource that is unavailable" "click ok to try again or enter an alternate path to a folder containing the installation package 'iTunes.msi' in the box below"+
With that one, let's try the following procedure.
First, head into your Add/Remove programs and uninstall your QuickTime. If it goes, good. If it doesn't, we'll just attend to it when we attend to iTunes.
Next, download and install the Windows Installer CleanUp utility:
Description of the Windows Installer CleanUp Utility
Now launch Windows Installer CleanUp ("Start > All Programs > Windows Install Clean Up"), find any iTunes and/or QuickTime entries in the list of programs in CleanUp, select those entries, and click “remove”.
Next, we'll manually remove any leftover iTunes or QuickTime program files:
(1) Open Local Disk (C:) in Computer or whichever disk programs are installed on.
(2) Open the Program Files folder.
(3) Right-click the iTunes folder and select Delete and choose Yes when asked to confirm the deletion.
(4) Right-click the QuickTime folder and select Delete and choose Yes when asked to confirm the deletion. (Note: This folder may have already been deleted if QuickTime was successfully removed using Add/Remove Programs earlier.)
(5) Delete the QuickTime and QuicktimeVR files located in the C:\Windows\system32\ folder. Click Continue if Windows needs confirmation or permission to continue. (Note: These files may have already been deleted if QuickTime was successfully removed using Add/Remove Programs earlier.)
(6) Right-click on the Recycle Bin and on the shortcut menu, click Empty Recycle Bin.
(7) Restart your computer.
Now try another iTunes install. Does it go through properly now?

I got new hard driver for my MacBook I don't have the cd but I do have flash drive that has the software I need help because when I turn on my laptop it shows me a file with question mark how can I install the software from the flash driver?

I got new hard driver for my MacBook I don't have the cd but I do have flash drive that has the software I need help because when I turn on my laptop it shows me a file with question mark how can I install the software from the flash driver?

Hold down the Option key while you boot your Mac. Then, it should show you a selection of devices. Click your flash drive and it will boot from that.

Need help adobe bridge cc output module

I need help. I have an assignment I'm held up on completing because the adobe cc bridge does not have the output modue I need. I followed the adobe instructions page to the letter. I copied and pasted the output module folder to the adobe bridge cc extensions folder in programs/commonfiles/adobe. The only thing is the instructions then say to paste the workspace file into the workspace folder located below the bridge extensions folder. I don't have a workspaces folder there or anywhere. I even tried must making one and adding the file to it, but no go. can someone PLEASE help me with this? I have an assignment due like now that requires the use of the output modue.thanks!

oh,my system is windows 8.1. sorry, lol.

Trying to create a Invoice based on Order need help Error -5002

the dreaded -5002 error is haunting me too! and I could not find a matching solution for this in the forum....
I need help quickly on this. I am trying to create invoices for some orders so the Base - Target relationship is retained. The orders I pick are all Open (DocStatus   = O and the lines are all Open LineStatus = O)
here is my code
oInvoice.Lines.BaseEntry = 48
oInvoice.Lines.BaseLine = 0
oInvoice.Lines.BaseType = SAPbobsCOM.BoObjectTypes.oOrders
oInvoice.Lines.ItemCode = "A00001"
oInvoice.Lines.ItemDescription = "IBM Infoprint 1312"
'adding Line
oInvoice.Lines.Add
oInvoice.Lines.BaseEntry = 48
oInvoice.Lines.BaseLine = 1
oInvoice.Lines.BaseType = SAPbobsCOM.BoObjectTypes.oOrders
oInvoice.Lines.ItemCode = "A00002"
oInvoice.Lines.ItemDescription = "IBM Inforprint 1222"
'adding Line
oInvoice.Lines.Add
lRetCode = oInvoice.Add
If lRetCode <> 0 Then
    gObjCompany.GetLastError lErrCode, sErrMsg
    MsgBox (lErrCode & " " & sErrMsg)
End If

Indika,
Only set your base types...
(not items & description)
oInvoice.Lines.BaseEntry = 48
oInvoice.Lines.BaseLine = 0
oInvoice.Lines.BaseType = SAPbobsCOM.BoObjectTypes.oOrders
oInvoice.Lines.ItemCode = "A00001"
oInvoice.Lines.ItemDescription = "IBM Infoprint 1312"
'adding Line (to fill the second item line)
' the 1st line item is there by default
oInvoice.Lines.Add
oInvoice.Lines.BaseEntry = 48
oInvoice.Lines.BaseLine = 1
oInvoice.Lines.BaseType = SAPbobsCOM.BoObjectTypes.oOrders
oInvoice.Lines.ItemCode = "A00002"
oInvoice.Lines.ItemDescription = "IBM Inforprint 1222"
'DO NOT Add THIS line
' (only if you want to add a 3rd line item)
'''oInvoice.Lines.Add -> Don't add this
lRetCode = oInvoice.Add
If lRetCode <> 0 Then
    gObjCompany.GetLastError lErrCode, sErrMsg
    MsgBox (lErrCode & " " & sErrMsg)
End If
remember to add :
oInvoice.CardCode = "your BP"
oInvoice.DocDueDate = Now
oInvoiceDoc.CardCode = txtDOCBPCode.Text

Installation of Photoshop update 13.1.2 for creative cloud fails with error code U44M1P7 I need help

I need help installing update 13.1.2 for Photoshop creative cloud, installation fails with error code: U44M1P7. Could someone please help?

Sorry to bother you.
I could find the answer after searching previous posts about this language problem.
Had to change my language in AAM profile and then download PS CS6 again ( english version ).
Then open the actual Photoshop and in preferences > interface you can besides the Dutch also option for English.
restart application and Voila.
Greetz, Jeroen

Newbee.. Need HELP G4 quicksilver

Similar Messages

Maybe you are looking for