Newbie-2 Mac Laptops, One AE, One Verizon DSL modem, VPN-Set Up?

I have read through the discussions here before I posted, but since I am new to Airport Express (AE) I may have missed the obvious.
Our household has two Mac laptops. I just purchased AE and am trying to figure out how to hook it up with my Verizon DSL modem.
Can I just use an ethernet cable from the DSL modem to AE? Or do I need some kind of switch?
Will two laptops (with Airport cards) be able to connect to the internet at the same time using AE?
One laptop has a VPN for work. Will there be issues with AE and that set up?
Sorry for the dumb questions.

My question is how do I keep my Power PC connected to the DSL modem and set up the AE? There is only one ethernet port out. Do I need a hub?
No. Since the AirPort Express has only a single Ethernet port it can not connect to a broadband connection AND support a wired (Ethernet) client. Using a hub or switch between the broadband modem and AirPort Express will put the AirPort Express's DHCP server in direct conflict with your ISP's DHCP server. Your ISP won't like that.
Your options are:
Replace the AirPort Express with an AirPort Extreme base station (AEBS), or an inexpensive 802.11b/g compliant base station. In addition to the WAN port, the AEBS provides one LAN port (an inexpensive base station will provide 4 or more) for connection to wired (Ethernet) clients.
Place a wired router between the broadband modem and the AirPort Express. Configure the AirPort Express so that the option to distribute IP addresses is DISABLED.

Similar Messages

  • How to get online apps to work with the Verizon DSL modem firewall set at "Medium" level, not "Low?"

    How to get online apps to work with the Verizon DSL modem firewall set at “Medium” level? Xbox 360 Live, FTP, and the Windows sntp Time checker native to Windows XP WON’T WORK unless the Verizon firewall is first reset down to “Low.” Then all works well, but I then risk low firewall protection. Setup: · Westell 6100 DSL modem (Software Version: VER:4.04.03.00 Transceiver Revision: 7.2.3.0 Model Name: C90-610015-06), · D-Link DIR-655 wireless router (Hardware Version: A3, Firmware Version: 1.21), For Xbox 360 Live the “canned” port forwarding rule for provided in Verizon’s drop-down list for the Westell 6100 modem forwards ports 88 and 3074 for both TCP and UDP. This does not meet Microsoft’s forwarding recommendations for Xbox 360 Live stated at http://support.microsoft.com/kb/908874. Instead, for the Verizon modem (Westell) I made a new port forwarding rule to comply with those Microsoft instructions. It forwards ports 53, 80 and 3074 for TCP and ports 53, 88 and 3074 for UDP. These same ports are also forwarded in the D-Link router configuration. For FTP, port 21 is also forwarded for TCP and UDP in both modem and router. But they don’t work until I first cripple the Verizon firewall down to “Low.” How to get them to work with the Verizon firewall up to Medium?

    While I do not know the answer to your question, BUT since you have this modem and another router - you could just follow.
    http://www.dslreports.com/faq/13600
    ^^
    If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

  • Airport Express to Verizon DSL Modem - Connectivity issue

    I have Verizon DSL at home. I have an iMac G4 1.2GHZ w/o internal wireless. I'm trying to use the AX to join the DSL Wireless, and use the Ethernet on the AX to provide internet access to the iMac.
    Setup:
    Verizon DSL modem w/ build in Wireless G
    MAC address authentication
    AX MAC added to the MAC list
    AX Sucessfully added to DSL Wireless (I can see it connected at the DSL modem web page
    AX Status light is green (confirmed its getting an IP from the DSL Wireless)
    iMac plugged into the AX via ethernet (confirmed its getting an IP from the AX)
    No internet access on the iMac however.
    I did notice in the Airport Utility that sometimes the AX is logging:
    Connected to: <insert mac address here>
    Disconnected from: <insert mac address here>
    over and over at times....
    The AX and the Wireless router are approx 15ft from each other.
    I've also powered everything down, fired up DSL Router 1st, then AX, then Computer. Still no dice on internet to the iMac.
    Any suggestions? I shouldn't have to add the iMac MAC address to the filtering...but maybe....didn't have time to try that lastnight/thismorning.
    Thanks for any help!
    Message was edited by: Hightech.Redneck

    Welcome to the discussions!
    Couple of thoughts here:
    Check AirPort Utility - Manual Setup
    Click the Wireless tab just below the icons
    Make sure there is a check mark next to "Enable ethernet clients"
    You are trying to use the AirPort Express in a configuration known as a ProxySTA.
    The modem/router will need to be compatible with this function, so you should check with your ISP to see how this could be enabled on your modem/router.

  • Connecting Timemachine to Verizon DSL modem/wirelss router

    How can I successfully connect my Timemachine to a Verizon GT704WG DSL modem/wireless router? Set-up I tried: The DSL line (reg. phone wire) is connected to the Verizon device. I connected the Timemachine to the router via ethernet. On my Verizon Network (loggin in via the browser) I can see the device connected. But the Timemachine keeps blinking Orange (error I assume). I cannot see the device via my MacBook pro in AirPort Utility (when trying to open TimeMachine). I also cannot click on manual set-up (option not available - grayed out).
    Question: Is it possible to connect Apple's Timemachine to another DSL wireless router via ethernet. Are there setting I must use to make the timemachine available, since the DSL router recognizes the device. How does one set this networking configureation up - or are there other devices I need as an intermitted relay - and will thise hamper troughput?
    PS: My DSL router does not have a firewall set-up for the connection to the Timemachine. I allowed all rules for the device. DHCP is dynamic.
    Any advice is much appreciated.

    Thank you Neturonboy for asking this question and thank you Tesserax for answering it. It's amazing that Verion's site has nothing about this; they do mention the Time Capsule, but nothing about this typical configuration. I have the GT784WNV model DSL modem/router, which is probably similar to yours. As soon as I turned Connection Sharring Off (Bridge Bode) and updated changes it worked.
    However, I couldn't find where to do this at first using Mac OS X Lion. Luckily, I had an older laptop, which had the more familiar looking AirPort Utility version 5.4.2 you're talking about. After I had switched to Bridge Mode, I went back to Lion's version and could easily see where this setting is located. In Lion's (10.7.4) AirPort Utility, click on the image of your Time Capsule (there is no "Manual Setup" button in Lion), then select Network (not Internet), then change Router Mode (not Connection Sharing): to Off (Bridge Mode).
    About Guest Networks:
    Note, if you have a Guest Network, then once you go to Bridge Mode, this feature is turned off; the whole Guest Network tab disappears from the choices under Airport (using the older AirPort Utility). Since these Verizon modem/routers are also wireless, your guests can access the network directly from  Verizon's router instead of going through your Time Capsule. Perhaps having a wireless router feature for your DSL modem makes the Time Capsule's Guest Network option redundant. You can get the network name, and other security information from the label on Verizon's router, but there is also a WPS (Wi-Fi Protected Setup) feature that looks like it might be useful for sharing your network. There's a physical button on the modem and there's a settings page on the routers' web browser accessible settings at 192.168.1.1.. I'm still looking into this.
    Good luck!

  • Settings to get wireless router to work with verizon DSL modem?

    I have a friend who lives in NYC who's roommate has verizon DSL service, and they're trying to get their Linksys BEFW11S4 wireless router working with it so my friend can use wireless with her laptop. They're clueless with networking things, and I'm only familiar with setting routers up for Fios and cable service. I know DSL settings are different and I was hoping somebody could tell me the important ones to use on the router for Verizon DSL in NYC. Right now the roommate is just using a little 3"x3" black modem connected to her computer with an ethernet wire, but they don't know what model or anything the modem is. Can anybody tell me what settings I should use when I login to the router and configure it? Thanks

    Perhaps this may help
    http://www.dslreports.com/faq/13600
    ^^
    If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

  • Verizon DSL modem not connecting through Linksys wrt54g

    I recently switched to verizon DSL from comcast. The verizon modem when connected directly to the back of my mac works amazingly well. Now i was to be able to connect with my laptop and xbox360 wirelessly which was not a problem with comcast. So i take the Ethernet/Data/Modem cable(what ever you want to call it) from the modem and connect it to the INTERNET port on the back of the router. Then take another ETHERNET cable and connect it from the first WAN port to the back of my computer where the modem was originally directly connected. The routers internet light is on as is first ethernet light on the front of the router. And all three lights on the modem are on; internet, data, and dsl. The macintosh is now not able to connect to the internet. The laptop can connect to the network but not to the internet.(says local only) It seems like a lot of people have had this same problem but i have yet to see a solution. and again when i take the cord from the modem to the router and change it back to connecting the modem directly with the home computer (mac) the internet works fine. I know this seems very dumbed-down and a dumbed-down kind of answer is preferred. I have been fixing problems with our home network for years now and have never come across something that stumped me while the solution seems like it would be so simple.

    If you have Verizon DSL and you wish to configure your router and connect the XBOX360 wirelessly, then, first thing you should do is to fully bridge your modem, then connect your modem to the internet port of the router and configure your router's internet connection type to PPPoE...
    Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
    When the router’s web-based setup page appears, click Setup then look for Internet Connection Type and select PPPoE on the drop-down arrow.
    Enter the username and password that your ISP provided you in the User Name and Password fields, including the domain in the username if necessary such as [email protected] and CLick Save Settings.
    Click Status then look for Login Status and check it says Connected. If it’s connected, you should be able to access the Internet.
    NOTE: If the Login Status says Disconnected, click Connect, then check if you’re receiving an error message.
    If you get an error meaasge follow this link
    For xbox -
    Click on "Applications and Gaming" tab and then click on "Port Range Forwarding" subtab...
    1) On the first line in Application box type in ABC, in the start box type in 53 and End box type in 3074, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box, click Save Settings once done...
    2) Once you return to the set up page click on the Security tab and uncheck Block Anonymous Internet Requests and click on Save Settings...
    3) Click on set-up and change the MTU Size to 1452 and click Save Settings...
    4) Goto the XBox Network Settings and IP Address Settings and select manual IP Settings and assign the following on your Xbox
    IP Address :- 192.168.1.20, Subnet Mask :- 255.255.255.0, Default Gateway :- 192.168.1.1...
    5) Also assign the DNS Addresses on the Xbox
    Primary dns :- 4.2.2.2...Secondary dns :- 192.168.1.1
    6) Turn off your modem, router, and Xbox...Wait for a minute...
    7) Plug the modem power first, wait for another minute and plug the router power cable, wait another minute and turn on the Xbox and test it...it will connect...
    IP Address: 192.168.X.[last part of ip in your device]    e.g. if static ip given to the device was 192.168.X.10 get the last part and put that to the empty box.

  • New AE Won't Work With Old Verizon DSL Modem

    I'm trying to set up a new AE station for a friend. She had an Airport station that worked fine. The DSL modem is like 6 years old or something. Of course I've tried calling Verizon, but am on hold forever. Is it possible the modem is too old? I've looked at ports, all settings I can think of, but nothing. I've set up as many as a hundred of these, so have some experience. Just hoping for some feedback 'till I talk to them. It's PB 12" with 10.4.3 running. It's brand new. When I put the old station back, no problem. Any help is appreciated.

    With the old base station connected open Airport Admin Utility and "Save a copy as..." something. Connect the new one and import that configuration. If it is really old that won't work but it is worth a try.
    Is PPPoE needed for the DSL connection?
    Have you powered everything down and slowly brought them back (modem, AE, and computer)? Sometimes it takes a while for an ISP to recognize a new network device as valid.

  • Help please:set up mac 10.4.11 with ext dsl modem to send and receive faxes

    Hi and thanks in advance. I have a G4MDD dual processor, and have a dsl modem for internet connection. I want to set up to send and receive faxes. I can make and receive phone calls while connected to the internet. any ideas or help appreciated. Thanks again.
    Message was edited by: R.Andom

    I cannot send/receive faxes via my dsl, I have to use my regular phone line. (My DSL modem only has one phone jack port, and that is to connect it to the outside world. Pretty sure this is true of every DSL modem.)
    When I need fax capability, I unplug the phone line to my telephone at the phone end, and plug that cable into the modem port in the back of the G4. (The modem is built-in.) After sending / receiving, I switch the cable back to the phone.
    You set up fax capability in System Preferences / Print and Fax.

  • Model 7500 Verizon DSL Modem/ Router Help!

    I just reformatted my hard drive and reinstalled XP on my desktop cause of a virus. Everything is working fine, but I heard from someone the model 7500 comes with wireless. How do I get that to work? I really want wireless for my laptop also because the local connection around here plain sucks. Can anyone give a detailed guide and/or link to help me set it up?
    Thanks
    -Reynorigod

    #1 Go to http://www22.verizon.com/residentialhelp/
    #2 Set your Preference for Internet to DSL, as need be.
    #3 Then go to Internet -> Home Networking -> User Guides
    #4 Select the user's guide for VersaLink 7500.
    ^^
    If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

  • Verizon DSL Modem Firewall?

    Hello,
    A few years ago I set up my wifi network with a Verizon D-Link modem/router.  My wifi is provided by an Airport Extreme -- the AE is connected to the D-Link via ethernet.  I also connect my iMac to the AE via ethernet as well.  All other devices in my home connect to internet via wifi broadcast by the AE.
    At the time I set up the D-Link, I recall reading that I should leave its firewall settings at the minimum, so as to not interfere with the OS X software firewall.  I use that on my iMac and that works fine.  I'm concerned though that my wifi network is open to potential issues without the D-Link firewall set at a higher level.  It would seem that the internet connection comes into the D-Link then to the AE (which is in bridge mode), and then to my iMac (protected by the OS X firewall) and other devices (potentially unprotected).  Should I be concerned about the wifi network itself?  If so, should I turn up the security on the D-Link?
    I suspect others have a similar set-up and probably understand a bit more than I do.  Appreciate any insights that could be offered!

    Lanny,
    Thanks for the response.  I am using WPA2 with the AE to protect my wifi network.  Two laptops that connect to my wireless network have the OS X firewall turned on and that is kept on for use in public wifi space as well.  I also have a number of iPhones, iPads, and Apple TVs that use the wireless network, but I don't think there is any way to "hack" into them over wifi.
    I am surprised that I don't need the OS X firewall for the ethernet connected iMac.  I had read some time ago that using that was a better solution, particularly in stealth mode.  Assuming I use the firewall on the Verizon router, what setting should I use?  And using both the hardware firewall on the Verizon router and the OS X software firewall on the iMac would be redundant then, correct?
    Thanks again!

  • Problems setting up Verizon DSL (DHCP) and AirPort Extreme

    I have Verizon DSL with DHCP and old router (Linksys WRT54G). I've bought iMac and new router (AirPort Extreme) to connect to iMac wirelessly. I have a Windows computer connected to the Linksys WRT54G. Now here is the story. I can connect verizon DSL modem (it's in bridge mode) to PC directly and connect to the Internet. When I plug AirPort between the DSL modem and PC, auto-configuration doesn't work, AirPort utility says there is problem with internet connection. Router simply can't obtain IP address from verizon's DHCP server. I've tried to copy DNS server addressed from the IP configuration in Windows, the AirPort light went green and Windows indicated connection as successful, however I still cound't browse the Internet because gateway is not set. Any ideas how to make AirPort connect to the internet using DHCP instead of manual settings? I can try to do it from the mac if needed, I don't think it would make any difference though.

    Welcome to the discussions!
    Sorry, I can't quite track exactly what you are trying to do.
    What would the network that you are trying to set up look like?
    Modem>AirPort Extreme>Computers? Are you saying that you won't be using the Linksys in the new setup?
    Sounds like you need to set the Airport Extreme up to supply PPPoE service (which the Linksys is doing now-if the modem is in bridge mode), but I will wait for your response before offering specific info.
    If you've been fiddling with settings, we may need to do a hard-reset on the AX to start over. You should not be fiddling with DNS, etc. Almost always, these settings are done automatically when you have the device set up correctly.

  • Verizon DSL and FTP/SSH issues

    Can somebody competent suggest finally something here ? (the web is full of unresolved complains about this).
    PROBLEM
    iMac, Leopard -FTP server activated, firewall completely disabled. No problem connecting to it from another machine on the same network using local network IP address (as listed in Apple sharing panel: "Other people can access your FTP server at ftp://192.168.1.x").
    The problem is connecting to the server from OUTSIDE the local network (that is on the IP assigned to my machine by Verizon DSL modem/router combo) as this always fails with message: "Connection refused"
    It is not clear to me what is refusing connection, the router, the mac itself or just the ftp server.
    I set up port forwarding on the router (ports 20,21) per widely circulating instructions but that makes no difference whatsoever to my ability to connect to that server.
    The situation is really confusing because a simple web check (http://www.canyouseeme.org/) shows them open, fully accessible, but on the other hand when I do port scan in Network Utility on my mac I see them only open under local IP, external IP only allows 6 ports (telnet, http, http-alt, etc) open, and port forwarding on the modem makes no difference to what Network Utility reports as open on wide IP *.
    I know that forwarding works on this Verizon modem from the fact that I was able to get my bittorrent client to work correctly (NAT problem) once I opened its port on the router. So I'm tempted to conclude that it is something on the mac that refuses. But what, firewall (shouldn't - it's disabled), the ftp server (unlikely 3rd party server "Pure FTPd Manager" shows exactly the same behaviour) ?
    So who? And what to do?
    Apple?

    I'm unable to make much out of any of this, so I hope j.v. you will be kind enough to comment further.
    config: Verizon wireless DSL router/modem.
    WAN
    ip #71.111.61.141
    LAN
    192.168.1.64 iMac (wired) runninng ssh "server:
    192.168.1.66 N800 internet tablet (on WiFi locally, same router)
    192.168.1.68 SIP hardware Linksys (wired)
    router forwards 22 to iMac 192.168.1.64 (open from WAN per http://www.canyouseeme.org/)
    TCP dumps per j.v. test
    on successful local IP from iMac
    "ssh [email protected]"
    nothing dumped
    on unsuccessful from iMac on external IP "connection refused"
    "ssh [email protected]"
    23:48:45.886050 IP 192.168.1.64.63815 > pool-71-111-61-141.ptldor.dsl-w.verizon.net.ssh: S 2691185684:2691185684(0) win 65535 <mss 1460,nop,wscale 1,nop,nop,timestamp 612547688 0,sackOK,eol>
    on successful local IP from N800
    "ssh [email protected]"
    1 IP 192.168.1.66.56022 > 192.168.1.64.ssh: P 2200:2232(32) ack 2526 win 2636 <nop,nop,timestamp 4936734 612549301>
    23:51:27.268487 IP 192.168.1.66.56022 > 192.168.1.64.ssh: F 2232:2232(0) ack 2526 win 2636 <nop,nop,timestamp 4936735 612549301>
    23:51:27.271439 IP 192.168.1.66.56022 > 192.168.1.64.ssh: . ack 2527 win 2636 <nop,nop,timestamp 4936735 612549301>
    23:57:56.551019 IP 192.168.1.66.61798 > 192.168.1.64.ssh: S 774661275:774661275(0) win 5840 <mss 1460,sackOK,timestamp 4986560 0,nop,wscale 2>
    and so on
    on unsuccessful from n800 on external IP "connection refused"
    "ssh [email protected]"
    1 IP 192.168.1.66.56022 > 192.168.1.64.ssh: P 2200:2232(32) ack 2526 win 2636 <nop,nop,timestamp 4936734 612549301>
    23:51:27.268487 IP 192.168.1.66.56022 > 192.168.1.64.ssh: F 2232:2232(0) ack 2526 win 2636 <nop,nop,timestamp 4936735 612549301>
    23:51:27.271439 IP 192.168.1.66.56022 > 192.168.1.64.ssh: . ack 2527 win 2636 <nop,nop,timestamp 4936735 612549301>
    Will test "real external" connection (meaning from something not sitting on the same router) tomorrow and will post.

  • Can I use a modem I got from a friend with Verizon DSL?

    My friend gave me a Verizon DSL (modem plus router) for Verizon. Can I use that for DSL service? Thanks!!!

    Yes, it will likely work just fine.

  • Two mac laptops, one iPhone and an iPod touch. Sync apps?

    Hi there, between my wife and I, we have two Mac laptops, one iPhone and an iPod touch.  The iPod touch is new- is it possible to get the apps that have already been purchased for the iPhone, onto the iTouch?

    schmjorgen wrote:
    but can i then only ever use both the iphone and itouch with that particular mac?
    you can use home sharing to transfer media files (incl. apps) between the two Macs. if you and your wife use separate Apple ID's to purchase content, authorize the wife's machine for yours and yours for hers.
    is there a way to make both portable devices work with both macs?
    by design, iOS devices sync with only one library at a time.
    i am hoping the "home sharing" feature will be the answer but so far i have not been able to make it work.
    these links may prove helpful:
    Setting up Home Sharing on your computer
    Troubleshooting Home Sharing

  • I have an old iPhone (3s) that I've now replaced with a newer one.   I would like to use the old iPhone in the same way I do an touch.   When I plug it into my Mac laptop, there is no recognition on my computer of this old iPhone.   What can I do?

    I have an old iphone that I've replaced with a newer one :-) and I'd like to use the old one in the same way I do an itouch.   When I plug it into my Mac laptop, there is no recognition of it as a device.   Help!   What do I do????

    http://support.apple.com/kb/ht3406

Maybe you are looking for