(Newbie Alert) KMymoney refuses to run

Hello,
I installed kmymoney2 (0.8.9-1), but it refuses to run:
buzz ~ $ kmymoney
kmymoney: error while loading shared libraries: libkabc.so.1: cannot open shared object file: No such fileor directory
Moreover, its .desktop file is being installed into /opt and does not appear under kde's menu.
Could anyone help me, please?

rbaprado wrote:
rbaprado wrote:
lucke wrote:
Interesting, only i686 has -2.
Rebuild it yourself using ABS, if it works after rebuilding, send a notice to its maintainer (swiergot).
No good:
checking for dcopidl... /opt/kde/bin/dcopidl
checking for dcopidl2cpp... /opt/kde/bin/dcopidl2cpp
checking for mcopidl... not found
configure: error: The important program mcopidl was not found!
Please check whether you installed aRts correctly or use
--without-arts to compile without aRts support (this will remove functionality).
make: *** Nenhum alvo indicado e nenhum arquivo make encontrado. Pare.
I managed to compile it with --without-arts, but got 0.8.9-1 again :-(
You just need to bump the 'pkgrel' line in the PKGBUILD file. When you do this, just bump it to the version that you're looking for so that future upgrades will overwrite the file.
pkgname=kmymoney2
pkgver=0.8.9
pkgrel=2
Oh yeah, mcopidl is in KDE-libs somewhere. I don't have KDE installed so I can't tell you where.
Last edited by skottish (2008-08-31 16:33:43)

Similar Messages

Flash Player refuses to run, if outdated. Can I change this setting?

I work in a video production environment -- tonight we ran into a problem where a couple of live monitoring systems were not working because Flash refused to run; presumably, because it's out of date.   In this case, the systems are "Deep Frozen" (locked down, essentially).
While I think I understand the underlying reasoning for this, it's highly disruptive.    Is there a way we can change Flash Player so it doesn't refuse to run if it's outdated?
These systems are on OSX Yosemite. It's possible it's not just a Flash Player setting, but a browser setting -- still trying to track this down.
Tips, pointers would be appreciated!
Thank you.

Yeah, that makes sense. Faronics is really into buzzwords. It was hard to cut through the marketing-speak to figure out what they were actually doing.
The plug-in blocking technology on Mac is called xprotect. You can disable it, which might make sense in your use-case, but it's typically a really bad idea for the average end-user.
sudo mkdir /System/Library/Launchdaemons/Disabled
sudo mv /System/Library/LaunchDaemons/com.apple.xprotectupdater.plist /System/Library/LaunchDaemons/Disabled/com.apple.xprotectupdater.plist
sudo /usr/libexec/PlistBuddy -c "Delete:JavaWebComponentVersionMinimum" /System/Library/CoreServices/CoreTypes.bundle/Contents/Resources/XProtect.meta.plist
I'm guessing that these files are mutable on the system and not part of the persistent snapshot, or I imagine that the blocking would have went away after a reboot. I'm thinking that you can probably disable these and update the relevant snapshots to ensure that you're not picking up new xprotect blacklists in the field.
If you're just hitting the same set of consistent local IPs for your monitoring backend, it might make more sense to preconfigure them in Safari as always allowed vs. wholesale disabling xprotect.
Hopefully that's helpful.

Flash player refuses to run.

flash player refuses to run. have tried all the fixes but am unsuccessful....

Welcome to the Adobe Forums.
The more information you supply about your situation, the better equipped other community members will be to answer. Please supply the following Information:
    •    Adobe product and version number
    •    Operating system and version number
    •    Browser and version number (where applicable)
    •    The full text of any error message(s)
    •    What you were doing when the problem occurred
    •    Screenshots of the problem (if possible)
    •    Computer hardware, such as CPU; GPU; amount of RAM; etc.

Alert monitor for long running background jobs

Hello,
I have to configure an alert moniter for long running background jobs which are running more than 20000 secs using rule based. I have created a rule based MTE and assigend MTE class CCMS_GET_MTE_BY_CLASS to virtual node but i dont find a node to specify the time.
could any one guide me how can i do this.
Thanks,
Kasi

Hi *,
I think the missing bit is where to set the maximum runtime. The runtime is set in the collection method and not the MTE class.
process: rz20 --> SAP CCMS Technical Expert Monitors --> All Contexts on local application server --> background --> long-running jobs. Click on 'Jobs over Runtime Limits' then properties, click the methods tab then double click 'CCMS_LONGRUNNING_JOB_COLLECT', in the parameters tab you can then set the maximum runtime.
If you need to monitor specific jobs, follow the process (http://help.sap.com/saphelp_nw70/helpdata/en/1d/ab3207b610e3408fff44d6b1de15e6/content.htm) to create the rule based monitor, then follow this process to set the runtime.
Hope this helps.
Regards,
Riyaan.
Edited by: Riyaan Mahri on Oct 22, 2009 5:07 PM
Edited by: Riyaan Mahri on Oct 22, 2009 5:08 PM

Photoshop Elements now refuses to run

Photoshop Elements 4.0 now refuses to run on my Intel Macbook (10.4.10). It used to work flawlessly. One day, it just refused to open. The loading screen would come up, then it would crash and say "Photoshop Elements has unexpectedly quit." Nothing changed on my computer between the last time I used and when it started to crash. No new software, no updates etc. I have tried doing these things to fix the problem:
-Rebooting
-Deleting the Photoshop Elements .plist file
-Using a different user account on my computer
-Repairing permissions on my hard drive
-Uninstalling Photoshop Elements and reinstalling it
All of which have failed to work. Nothing I have done has been able to work.
Message was edited by: littlevish

Thanks, Barbara.
In no particular order, while the images are from the same camera, I get the same problem with images from other sources scanned in with my Epson 4490 scanner.
I run diskwarrior from time to time, but not on a regular basis. Is it not a good utility to use?
I am sure I deleted the twain driver, certainly from the import/export file you mentioned. There is no other mention when I use 'Find'.
There a lot of caches. I have deleted the Opera cache.
Donald

Anyone provide accurate info on why after 1 yr, after guarantee period expiry the DVD player on our I mac running Intel core duo processor with OS 10.6.8 refuses to run DVDs? CDs run

Can anyone provide accurate info on why after 1 yr, ( just after guarantee period expiry) the DVD player on our I mac running Intel core duo processor with OS 10.6.8 refuses to run DVDs?
CDs run without problem and until recently the DVD we have (all original no pirated copies) ran; we have used a CD cleaner disc to no avail.

Welcome to the Apple boards:
I suggest an erase and install and use your backup for any important files you have.
Did you perform a disk check/repair and permissions repair and a PRAM zap before updating? While not required, they are usually necessary to avoid issues.
There are so many reasons for a bad install, that it is impossible to list them all.
Out-of-date software, drivers, etc, haxies, and other software can cause problems.
My three updates were without incident, so it is possible for a perfect update, but unless you supply us with details about your previous system, programs, apps, drivers, etc., it is not possible to figure out what happened.
Again, whenever installing an update to an OS, a clone or other full backup is absolutely necessary, as reading the posts on this board indicate.

Force immediate alerts timer job to run on a particular server

In Central Admin->Manage Content Database->Preferred server for timer jobs says "Not selected". We have 2 WFE servers, server1 and server2. server1 currently is not able to connect to the smtp server so we would like for the immediate
alerts timer job to be executed on server2 which has access to smtp. I know I could set the preferred server for timer jobs to be server2 but that would mean that all timer jobs would execute on that server.
I have a few questions:
1. Is there a way to force just immediate alert timer job to run on server2?
2. How can I find out which server is currently processing the immediate alerts timer job (or which server processed the last immediate alerts timer job)
3. If I force all timer jobs to execute on server2, how much of an effect does it have on the server in terms of RAM, CPU and other resources?
thanks,

What i believe is, alerts timer jobs is ContentDatabase Locktype so if you select the prefred server from the Central admin.
I am sure, all the timer jobs which having the ContentDB lock type will run on preferred server.
Note that content database locks are handled at the server and database level, not at the individual job level.
The Article Trevor mentioned is great for explanation.
2.) you can check it from the Central admin > Monitoring > Job History and from here select the job definition which history you want
to see.
3)you forcing all timer jobs in one server that's mean you are increasing the over head for that server so performance may be issue. Its depend how many user / load you already have
on the server. another thing, may be deadlock between the jobs i.e if one job took more time and other jobs wait for it ends up skipping it.
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Newbie alert - opening swf

I just downloaded the Flash demo, the purchased copy with
books and the other books I ordered have not arrived. But I cannot
wait to try this stuff. So NEWBIE ALERT
I have an swf file from our web devloper that I want to look
at, take apart and see how it works. When I open it in the flash 8
all I can see is the end product. How can I see what went into
this? Do I need other files he might have?
Sorry for this silly question but you know how it is when you
are starting a new project....

Thanks! My designer is sending me the correct
files.

Boot Camp refuses to run on new iMac with 10.4.7

I am setting up a brand new 17" Intel iMac for a client, and after using Software Update to download all required updates, including Mac OS 10.4.7 and firmware update SMC 1.1f5, Boot Camp Assistant refuses to run, saying that a firmware update is required.
Since I have confirmed that I have already installed the latest firmware update, I can only conclude that something in 10.4.7 broke Boot Camp or that the Boot Camp Assistant is simply not aware of SMC 1.1f5, which is the latest version.
Anybody else out there run into this problem also?

I also believe I typed the date wrong, it was 17 APR not 16 MAY it was available.
Firmware Updates are not customarily installed through Software Update. The SMC Firmware Update was an exception. Usually, because they can be a bit disruptive if you're not prepared for them, Firmware Updates are more user intentional/active. They usually require you to download them directly to your desktop, read the install instructions and install when you have prepared your Mac to receive the install without chance of interupting the process.

ADR refuses to run this month

Hi all,
I have a test environment and I created an ADR for software updates. I went and had a look after the expected run time and the rule had not run. "Last Evaluation Time" was blank. The rule is enabled. I checked the ruleengine.log and I see no errors.
I've been trying to figure it out today and changing the time in the evaluation schedule and seeing the new entries change in the log. For some reason, every time I change the evaluation schedule, the log tells me it will run next month. This seemed to happen
when I changed my ADR time from 10:00PM to 11:00PM well before the expected evaluation time because I realized my SUP would sync at 10. Prior to the change, the ruleengine.log said:
Refreshed ScheduleList instance for Rule (16777220) from schedule string (02ECBAC000231400) with next occurence (11/12/2013 10:00:00 PM) SMS_RULE_ENGINE 10/28/2013 4:09:43 AM 1736 (0x06C8)
After the change:
Refreshed ScheduleList instance for Rule (16777220) from schedule string (02ECBAC000231400) with next occurence (12/10/2013 11:00:00 PM) SMS_RULE_ENGINE 11/4/2013 3:00:18 AM 1736 (0x06C8)
Now, I'm wondering if the change in time (from Daylight savings time) might have something to do with it? That time change happened on the 2nd.
For example:
Today is the third Wednesday of the month. I change my ADR to run tomorrow (the third Thursday) at 11:00 PM and recur every month on the 3rd Thursday. The log displays the following entry:
Refreshed ScheduleList instance for Rule (16777220) from schedule string (02F5BAC000251600) with next occurrence (12/19/2013 11:00:00 PM) SMS_RULE_ENGINE 11/20/2013 11:19:21 AM 1736 (0x06C8)
It seems that the ADR refuses to run this month and I can't for the life of me figure out why. Any thoughts on this? I hope this post isn't too confusing. I'm still a relative noob when it comes to SCCM

Hi,
Here is a useful article for your reference.
Using System Center 2012 Configuration Manager - Part 9. Deploying Monthly Updates
http://www.windows-noob.com/forums/index.php?/topic/6799-using-system-center-2012-configuration-manager-part-9-deploying-monthly-updates/
Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Udev refuses to run my scrips [solved]

I've created a udev rule at /etc/udev/rules.d/81-zte.rules with the following:
SUBSYSTEMS=="usb", ATTRS{product}=="ZTE HSUSB Device", KERNEL=="sd?1", NAME="%k", SYMLINK+="zte", GROUP="storage", RUN+="/home/afulm/.scripts/zte.sh"
It works except that it for some reason refuses to run my script. What have I done wrong?
The script is a simple scripts that mounts my device:
#/bin/bash
notify-send 'ZTE Blade mounted.' --icon=dialog-information
sudo mount /mnt/zte
thunar /mnt/zte
Last edited by afulm (2012-09-17 15:59:27)

stewie wrote:
#/bin/bash
notify-send 'ZTE Blade mounted.' --icon=dialog-information
sudo mount /mnt/zte
thunar /mnt/zte
Is this script executable?
It also looks like you might have the first line wrong. I think it should be:
#!/bin/bash
Oops.
lucke wrote:
Those commands are run by root (thus sudo is redundant) and they have no knowledge of your X session.
DISPLAY=:0.0 su yourusername -c "thunar /mnt/zte"
would probably work and for notify-send (which uses dbus) see this topic. You can test those commands by running them as root in a virtual console and observing whether you see the desired effect in your X session.
Thanks it works now.

Connection refused error running JSP on Jdev 10.1.3.0.3.3412 with MySL 5.0

Hello,
I'm using Jdeveloper 10.1.3.0.3.3412 on a Mac with a MySQL database. In Jdeveloper i can make a connection to the database and create adf business components
I've made a JSP page with ADF on a single table. No errors when compiling. When I try to run the JSP Page using Embedded OC4J (on Mac OSX Tiger) I get the error:
5/12/09 00:45:50 java.net.ConnectException: Connection refused
05/12/09 00:45:50      at java.net.PlainSocketImpl.socketConnect(Native Method)
05/12/09 00:45:50      at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
05/12/09 00:45:50      at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
05/12/09 00:45:50      at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
05/12/09 00:45:50      at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:428)
05/12/09 00:45:50      at java.net.Socket.connect(Socket.java:507)
05/12/09 00:45:50      at java.net.Socket.connect(Socket.java:457)
05/12/09 00:45:50      at java.net.Socket.<init>(Socket.java:365)
05/12/09 00:45:50      at java.net.Socket.<init>(Socket.java:207)
05/12/09 00:45:50      at oracle.jdevimpl.runner.oc4j.Oc4jNotifier.sendMessage(Oc4jNotifier.java:98)
05/12/09 00:45:50      at oracle.jdevimpl.runner.oc4j.Oc4jNotifier.postInitApplicationServer(Oc4jNotifier.java:55)
05/12/09 00:45:50      at com.evermind.server.ApplicationServer.serverExtensionPostInit(ApplicationServer.java:1041)
05/12/09 00:45:50      at com.evermind.server.ApplicationServer.setConfig(ApplicationServer.java:927)
05/12/09 00:45:50      at com.evermind.server.ApplicationServerLauncher.run(ApplicationServerLauncher.java:98)
05/12/09 00:45:50      at java.lang.Thread.run(Thread.java:613)
What am I doing wrong? The embedded OC4J library is added to the project. I've tried to use the javac compiler. It looks like the OC4J instance cannot make a connection to the db.
Thanks,
Martin

Hello
I've added the connection to the web.xml, but still get the same error.
When I go to embedded OC4J preferences and change the JNDI-names of the datasources (global and current-workspace) to the same name (this was default), i get this error message:
9-dec-2005 9:30:09 com.evermind.server.ApplicationStateRunning initNativeDataSource
SEVERE: Error creating native data source. The location 'jdbc/MySQLConnectionCoreDS' is already in use.
05/12/09 09:30:09 Application: current-workspace-app is in state FAILED
05/12/09 09:30:09 Error instantiating application 'current-workspace-app' at file:/Users/martinsuijs/jdevhome/mywork/myWorldApp/myWorldApp-oc4j-app.xml: Error creating native data source. The location 'jdbc/MySQLConnectionCoreDS' is already in use.
05/12/09 09:30:14 java.net.ConnectException: Connection refused
grtz
Martin

APP-V package refuses to run...

I created an APP-V package for an application called SigmaPlot 12.5.
During sequencing the app ran fine. It is configured to run on any OS
When I install on client machine, it will not run..no error message..app-v client starts and then quits almost immediately
As a newbie, I am at a loss as to what to look for to resolve the issue.

Keith,
You have accidentally posted your question in Microsoft Project specific forum , consider re-posting your question using appropriate
forum for faster and expert response
http://social.technet.microsoft.com/Forums/en-US/home?forum=mdopappv
Hrishi Deshpande Senior Consultant

Script Alert "You should only run scripts from a trusted source."

I created a small javascript which opens Photoshop and resizes some images.
I want to be able to double-click the .JSX file from Windows Explorer, and have Photoshop execute the script. Likewise, I want to be able to run the .JSX file from the command line.
The script runs perfectly. However, the problem is that I don't want any user interaction. I want to be able to run the script from the command line without the user having to click anything. What happens now when I try to run the file from Windows Explorer of the command line is, I get a Script Alert with the following text:
You are about to run a script in Adobe Photoshop CS3. You should only run scripts from a trusted source. Do you want to run the script? Yes/No
Is there any possible way to bypass this message or to answer in the affirmative?
Thanks,
Jamie L.

Hi... Sorry to revive such an old thread,
Does anyone know the "trusted source" folder for MAC CS4.
EDIT!
My bad. "The /users/<user_name>/documents/Adobe Scripts" folder is working for this purpose for me. I needed a path to it and forgot that the ~ resolves to the current user. Sweet.
-Bill

[SOLVED] Perl refuses to run certain utilities

[Aside: Sorry, not really an Arch newbie, but I am a forum and Perl newbie; not sure where else to post this.]
I am the current maintainer of the AUR package called mesa-demos-git; it was flagged out-of-date, and I was going to examine the problem (and throw in the new VCS syntax for good measure) when I was greeted with this fun little error:
==> Starting build()...
autoreconf: Entering directory `.'
autoreconf: configure.ac: not using Gettext
autoreconf: running: aclocal -I m4
Attempt to reload Scalar/Util.pm aborted.
Compilation failed in require at /usr/lib/perl5/site_perl/Data/Dumper.pm line 297.
aclocal: error: echo failed with exit status: 1
autoreconf: aclocal failed with exit status: 1
Running aclocal by itself in a directory with a configure.ac fails, as one would expect from the above error (even though it has worked in the past on other packages I've updated in the last couple weeks).
I also wasn't thinking for a while and thought it was a missing module, so I ran cpan to try to install it, but cpan fails with the same error.
Yeah, so something's wrong with the perl configuration on my system; I tried a `pacman -Rnsdd perl` and a reinstall, but to no avail. Actually, since no package seems to own /usr/lib/perl5/site_perl/Scalar/Util.pm, I have no idea where to start.
What's going on here and how can I even begin to solve this?
Last edited by luolimao (2013-05-28 03:03:46)

Does any package own anything in site_perl? I ask because that directory is empty on my system. I'm wondering if those files have been installed manually and are being used instead of the versions in core_perl/vendor_perl such as /usr/lib/perl5/core_perl/Scalar/Util.pm, for example.

(Newbie Alert) KMymoney refuses to run

Similar Messages

Maybe you are looking for