Newbie... AMD 64 with K8M Neo-V can't get it to work

I just resently purchased a bundled motherboard and processor from CompUSA, AMD Athlon 64 Processor 2800+ with a MSI K8M Neo-V with VIA K8M800 + 8237 Chipset also puchase (2) 512 DDR400 PC3200 sticks. I'm replacing an old Gigabit motherboard with this one. Installed everything per spec, did not connect any device as of yet, just wanted to make sure the board would boot up with main harddrive first. I'm using the onboard video,went I power the system up I get nothing, no BIOS Setup screens, no video, nothing.... What have I done wrong ???
Any help would be greatly appreicated...

hi to all~~
i have just got the same mainboard yesterday, but got a lot of problems since the first install of software.........
i got a whole new unit with the following spec:
MSI K8M Neo-V
AMD Sempron 64-bit 2600+
Kingston 512MB DDR RAM
Maxtor 80GB SATA HD
LiteOn CDRW
and an internal modem
First problem:
after the 1st installation (win98se + all drivers given), the computer showed that the "Programmable interrupt controller" (under device manager) causing a resource conflict (code 15). I tried to change the resource but a window popup and said : "This resource setting cannot be modified" .
Action Taken:
1) format the HD and reinstall win98se. With no driver and any software installed, i checked the device manager and found the "Programmable interrupt controller" still causing a resource conflict.
2) from 1), i installed and updated the chipset controller but got no change..............
3) from 2), installed and updated all drivers, but the problem still there......>_<
Second problem:
After I installed the VGA driver and restart, I tried to adjust the resolution but always come out a "Rundll32" error......
Third problem:
System is unstable. When I copy files from CD drive to HD, after a few minute (copy in process) it will come out the blue screen .....>_<
also sometimes when i restart after installed the drivers, or switch on my computer, the computer will restart just after the windows98 logo dissapear, strange........
help me~~~
thankyou

Similar Messages

I need help with ISIGHT! I can't get it to work with MSN!

HI,
My issue is this... I have AIM/AOL and I am able to see myself on webcam.. however noone else can unless they HAVE a webcam... My first question is- "DO you have to have a WEBCAM on both ends for both people to see you?" Does the person I am chatting with HAVE to have a webcam to see me? If so WHY? They should atleast be able to see ME if I want them to... Also if they are using windows for PC platform... can they use a pc webcam and still connect with me through my isight although I am on a mac?
My second major ISSUE is.. WHY is the isight only compatible with AOL/AIM? I was told when I bought this it would be compatible with MSN Messenger for windows AND the MAC version... I have both and the isight does not show up on it... CAN ISIGHT be connected to msn messenger for MAC??? PLEASE help me!
I called APPLE tech support and they couldn't even help me! They told me to call Microsoft! Anyhow- one guy did say he was able to get his ISIGHT working with the MSN messenger for MAC platform.. do you have ANY idea how to do that?? The thing is ALL my freinds are on PC's and have MSN messenger..
ALSO- someone on mac rumors told me to look for a guy names RALPH! Said you know A LOT about mac and pc compatibility! PLEASE HELP
Bottom line - I want to use isight with msn so my msn pc friends can share webcam... I also have virtual pc software... is it easier to just get a pc webcam and do it through there? ( i tried that and it didn't work either) i need major TECH SUPPORT!
THANK YOU

Microsoft's Messenger for Mac (MSN) does not support webcams at all.
I have found the best alternative to MSN to be aMSN with macam for the webcam driver (it is a cheap usb webcam). Both are free open source projects. I guess if you use an iSight you will not need macam.
aMSN can be found here: http://amsn.sourceforge.net/
macam can be found here: http://webcam-osx.sourceforge.net/
The speed is substantially faster and it is far more stable than Mercury in my experience.
The only difficulty is the camera is often shown as being "in use by another application". To counter this I start macam, then plug in the camera (or unplug and plug back in). Then I start aMSN.

Help with this calc; I can't get it to work...

can someone please tell me what is wrong with this calc script in the attached document? It's the field titled "Total Tips" Thank you so much; I've spent a lot of time on it today. This stuff is new to me. Thanks.

Hi,
Not sure if this is what you are referring to, but I noticed that your event.value is being commented out as it sits on the line above, when I moved your event to a new line it started to work out your calculation.
Is this what you were having troubles with?

2011 i7 Macbook Pro with Windows 7 SP1, can't get it to work

2.2 GHz Macbook Pro 2011 17 inch
OCZ Vertex 3
Mac OS X 10.6.8
2nd HD instead of optical drive
I bought a downloadable version of Windows 7 SP1 from Microsoft and burned it to a disk. I have tried probably 25 times to install via Bootcamp, but I always get a black screen with a blinking cursor. I went to an Office Depot in Mexico and bought a hard copy of Windows 7 and still have the same problem.
I have searched and it seems like you can't install Windows 7 on Bootcamp via external drive (have read it on multiple sites, but can't figure out why).
I just upgraded to Lion after reading that you can install a Windows iso on a USB Stick, but after looking on these forums, the FAQ says it will work on only certain models.... My question is, what models? I have tried searching, but have had zero results.

your burn is the first issue, common - reduced slowest 2x burn speed
3rd party superdrives also don't work and you need support driver
you need to disconnect the 2nd internal drive also

Just bought Ear Force Z11 - headset, can't get it to work on my iMac intel based on the Windows side

I have used Boot Camp on my iMac 21" early 2008 to partition and set-up Windows 7 so that I could use my FSX Flight simulator, I bought EarForce Z11 headset to use with my simulator and can't get it to work, has anyone else ran in to this problem? If anyone can help I would appriciate it, the computer recognizes that I plugged them in but I am only getting sound over the iMac speakers and nothing with the headset.

assuming it works on osx then
sounds like
1, the mixer in windows have muted the headset connection you can change that in the control panel
2. the driver for your audio card is not working 100% (read people say that the 32bit win7 don't have drivers from apple avaible)
with the right drivers it should work
my imac 21" have a splitter connected where I have external speakers from logitech and a skullcandy headset
connected both play and the internal imac speakers only make a sound at bootup at first
this is both in osx, was in win7 64bit and win8 64bit

HT1151 i have a new apple external dvd drive, and i can't get it to work with my iMac?

I have a new apple dvd drive, I was told it will work with my imac, but when i plug it in ...nothing... iv been for update... still nothing. How can i get it to work???

If it is this drive, note that it is for MBA's and Mini's only:
http://store.apple.com/us/product/MC684ZM/A
Ciao.

On my windows 8.1 pc (i5 processor with 8GB ram) I can't get the automatic update voor CS4 master collection. I removed my panda antivirus and still can't automatically update. somebody any suggestion?

on my windows 8.1 pc (i5 processor with 8GB ram) I can't get the automatic update voor CS4 master collection. I removed my panda antivirus and still can't automatically update. somebody any suggestion?

thanks for your reply.
in Dutch it says that there are no updates available. I know that after
installing cs4 there are updates but i can't load them automatically. I did
a delete and reinstall, but still get the message.
kind regards,
2014-09-23 16:28 GMT+02:00 Atul_saini123 <[email protected]>:
on my windows 8.1 pc (i5 processor with 8GB ram) I can't get the
automatic update voor CS4 master collection. I removed my panda antivirus
and still can't automatically update. somebody any suggestion? created
by Atul_saini123 <https://forums.adobe.com/people/Atul_saini123> in *Downloading,
Installing, Setting Up* - View the full discussion
<https://forums.adobe.com/message/6755843#6755843>

I have a Mac Mini and I can't get it to work with my Ricoh Aficio MP 161. Any ideas?

I have a Mac Mini and I can't get it to work with my Ricoh Aficio MP 161. Any ideas?

The latest Apple driver support begins with the MP 171.
Here is Ricoh's official driver download page specifically for the Afico MP 161. Note that new drivers for this device were released on Aug 2, and include Lion and Mountain Lion.
Hopefully, this will solve your device issues.

I just got a new computer with Windows 7 and all my songs were transferred to my new computer along with itunes. But I can't get it to work. I also tried downloading Quicktime and couldn't get it to download.

I just bought a new computer and had files transferred along with itunes to the new computer. I can't get it to work. It doesn't recognize the extensions for itunes. I also tried downloading Quicktime and couldn't get it to download.

iOS: Device not recognized in iTunes for Windows
I would start with:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

I am trying to setup wireless using my old dome Airport ExtremeBase station. I had previously used it about 5 years ago when I had dial up but have now switche to DSL with Windstream. I can not get connecte as ABS keeps trying to dial up(the phone number)

I am trying to setup wireless using my old dome Airport Extreme Base station. I had previously used it about 5 years ago when I had dial up but have now switched to DSL with Windstream. I can not get connected as the ABS keeps trying to dial up(the old phone number). When I tried to change my network settings an annoying popup window says "your network settings have been changed by another application'. I have no idea what the message is all about and when I close this window it immediately pops up again and prevents me -as far as I can tell -from changing my Airport settings? I need advice on how to get this wireless setup done. Maybe a reset? or something else? I have the DSL phone line plugged into WIndsteam Seimens Speedstream 4200 modem and then the ethernet (yellow) wire from the WIndsteam Seimens Speedstream 4200 modem to the port on the dome that is a circle of dots.

1)Can you explain how using the AEBS as a bridge will work with the Seimens Speedstream4200?
As a bridge, the AEBS will basically become a wireless access point. This will allow the AEBS to provide a wireless network, but still allow the Speedstream to provide NAT & DHCP services for the wireless clients connected to the AEBS. If the AEBS was left as a router, you would have a double-NAT condition which isn't necessary bad in itself, but would create a second subnet. That would make it more difficult for clients connected to the AEBS to access clients connected to the Speedstream.
2) Is there a link that will guide me through the steps to set the AEBS as a bridge?
You can easily reconfigure the AEBS as a bridge using the AirPort Utility.
ref: AirPort Utility > Select the AEBS > Manual Setup > Internet > Internet Connection > Connection Sharing = Off (Bridge Mode)
3)Can I just connect the DSL phone line to the AEBS and eliminate the Speedstream4200?
Unfortunately no. The AEBS does not have a built-in DSL modem. You will still need the Speedstream to provide this function.

My iPod Classic is seen by Windows but not by iTunes. I have reset it, gone to disk mode and it won't show up in iTunes. There appears to be music on it in a file called MUSICSAVE. How can I get this to work with iTunes again?

My iPod Classic is seen by Windows but not by iTunes. I have reset it, gone to disk mode and it won't show up in iTunes. There appears to be music on it in a file called MUSICSAVE. How can I get this to work with iTunes again?

1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
3. Check the USB cable
4 Verify that Apple Mobile Device Support is installed
5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job
7. Check for third-party software conflicts.
<Link Edited By Host>

I just replaced my mac pro with an iMac and i can't get it to work with my epson stylus 3800 printer?

i just replaced my mac pro with an iMac and i can't get it to work with my epson stylus 3800 printer? i have downloaded the 3800 software three times and the imac keeps telling me there is no software to run the printer? Any help here?

Care to share which OS you are using?

Can't get iTunes to work with 2 User Accounts

I've tried to find my specific problem on previous threads but it seems that each situation is just a little different. I have two user accounts on my family shared Windows XP Home edition PC. Last week I installed my son's iPod/iTunes using the install disc. I changed the default to C:\documents and settings\user1\My Documents. Life was good. Then I got an iPod of my own. I followed the same install as above only changed the path to user2's account. I went to iTunes and everything was working just fine for user2. The next time user1 tried to access iTunes on his desktop under his Windows user account, he said it just kept searching. (Windows error message with flashlight) He decided to pop the install disc in and see what happens. (yikes!) He took all of the defaults and left both users with nothing working. Infact at that point iTunes was still on the user desktops but only pages and pages of HTML code would display if you tried to launch iTunes. I deleted all traces of itunes and iPod I could locate and went through the same reinstall process as before. I was able to locate user 2's libary and everything worked fine. (That's mine) Poor user1,(my son) we can't get anything installed to his user. The install disk recognizes only my installation and wants to remove everything first. I;ve done that a few times and still can only get user 2 working but not both.

hi Mommatron!
just checking on something. have you ever had any error messages at any stage of proceedings?
b in particular,
have you ever had an 0x80040707?
love, b

I have a pioneer 50 inch plasma   I purchased new from the company back in 2005.   I tried to hook up an Apple Tv to the pioneer receiver that came with the TV.   I can not get it to work.   The receiver has two HDMI inputs in the back.

I have a pioneer 50 inch plasma + I purchased new from the company back in 2005.   I tried to hook up an Apple Tv to the pioneer receiver that came with the TV.   I can not get it to work.
The receiver has two HDMI inputs in the back. However they say they are not for PC's. Furthermore they must be set up by going to the home menu.    I tried everything, but I can not get the receiver to talk to the Apple TV. I even tried a connector that uses an HDMI to the Apple TV that has the other side of the cable as 5 RCA cables. I could not get the receiver to see the Apple TV.   I have a newer TV in the house, it has no problem talking with the Apple TV. But this older system seems to be handicapped in its ability to talk with the newer Apple TV system.
My Email is [email protected]
Do you have any suggestions
Thanks
Bob

I could not access the Apple TV on the television.   If I put the Apple TV directly into by TV, I have an external sound system (entertainment system), therefore I worry that I would by pass the audio.
Thanks for taking your time to attempt to help!   Any more suggestions would be greatly appreciated.
Bob

How can i get acrobat to work with windows vista

How can I get adobeexportpdf to work with windows vista?

But if, on the other hand you do mean Acrobat, please let us know what problem you are having.

Newbie... AMD 64 with K8M Neo-V can't get it to work

Similar Messages

Maybe you are looking for