Newbie and New Installation

Hello,
I'm building my first pc at have just bought a new KT6V and am really looking forward to the experience. I have however arrived at my first problem.
I have noticed this motherboard only has one audio plud. Is there anyway I can connect separate CD-RW and DVD-RW?
Thanks in advance. Any assistance will be greatly appreciated.
Gezzimo

Hi Folks,
Thank you for your invalueble advice above and apologies for the delay in thanking you all.
System is up and running however, I have a few small things I am not sure how to resolve. I am also not sure what information is needed for advice to be given thus, please advise me(very new at this).
1. During boot, the primary master HD is not being recognized(when BIOS[I think]) perform a check. It 'hangs' for about 15 seconds until it then goes onto question 2. below). Is this normal and if not, how do I resolve this?
2. First issue is that, when installing XP Pro, I did the install via a WIN98 startup disk and then from the XP Pro setup.exe. Now after a successful install, each time the system reboots, it is asking me which os I want to boot from. First option is XP Professional, second option is original os. The second(i.e. original os) doesn't boot however, by selecting option 1 namely XP Pro, a normal reboot is possible. My question is : Is it possible that I can either remove this second option(non working) or, to configure the system to automatically boot XP Pro?
3. My system is a KT6V mobo, 2048 DDR333(PC2700), xp2800+. During booting, 'American Megatrends' recognizes my AMD as 1267 Mhz and my DRAM Clock as 266. Is this correct and if not, how do I correct it. My BIOS is still running default settings I think?
Excuse the lack of correct terminology. I do very much appreciate your responses and please excude ignorance.
Regards,
Gezzimo

Similar Messages

Differents between upgrade installation and new installation

Our processes have some misbi
Our processes sometimes misbehave. We don't know the cause. We have a DR site so we moved everything there and then everything worked with no issue. The applications are using SQL 2012
SP2.
All the servers are the same in the DR site as the primary site, One of the things we know to be different is that the SQL server installation in the primary site is an upgrade from 2008,
and the one in the DR site is a new installation of SQL 2012.
Do you think there could be a different behaver that is related to type of installation?
Does it make scenes to reinstall the SQL in the primary site as new installation rather than upgrade?

Hello,
Adding to Shanky response, do the DR SQL Server instances were configured the same (about parallelism, memory, tempdb,
etc.)?
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

My Name and New Installs

My Name is {edited for privacy}
A neighbor behind me on DOOL COURT had a new install of Verizon done about 6 months ago and the Fiber Cable is still coiled up in MY yard. This cable should have been buried and properly attached the box that was REGRETFULLY installed in my yard. I pick it up every time I try to mow my lawn but next weekend, May 18th I believe that it will just lay there and I will HAPPILY mow over it and possibly chop it into pieces. There is NO reason why this cable is still cluttering my yard!!!
Get it fixed!! You got 6 days!!!
Sincerely,
{edited for privacy}

It has been 3 days since I submitted my IDEA of properly doing your job in a timely manner.
I see that IDEA has been removed!!!!
So the count down continues and there has been nothing done!!!!!
I will be mowing in 3 days!!!!!
Sincerely,
{edited for privacy}
you can't even fix the name!!! How long does that take???

After laptop crash and new installation, how can i transfer my ipad content towards itunes ?

HI,
I had to change my hard disk on my laptop, and then resintall windows from scratch. After reinstalling iTunes, I want to transfer the content of my iPad2, iPhone and 2 iPods on iTunes.
However, when I want to synchronisze, iTunes brings an alert indicating that the content of the deveices will be replaced by the computer library (which of course is empty after the reinstallation).
Any help or advice please ?

Thank you. That would have worked too, but before getting the answer I found another solution: what I finnaly did was use Detunes to copy my books from the iPad. It was quite fast too. Any of those could have worked quite nicely.

Web sites isn't loading in my browser, uninstalled completely deleted all files form program files and new installation already done , issue isnt fixed

when i try to load online chat sites these are not loading in my browser. tried on different sites but none of them loaded. www.migchat.com , i have already done the complete un install and a fresh instalation but prblm is still same.

It loads O.K. for me. Have you tried a different browser?
This may not be of immediate help but your PriceMeterLiveUpdate Update shown in your System Details is not well regarded. Do you have any use for it?
Suggest you Google for information and advice.

Dynaic Link stopped working in new installation

Hi,
I just installed the 64 bit CS5 on a brand new Windows 7 64bit HP PC with plenty of performance power (Windows Experience Index 5.9). Anyway, during the very first use, as soon as I started working, I got the "Dynamic Link has stopped working" error. Why would this happen on a new computer and new installation? Is it something to worry about or that will casue a loss of unctionaltiy?
Thank you,
Mike

I deleted your other post.
I also made a change so that your problem.jpg shows on this page.

I have itunes directory on an external hard drive and want to direct a new installation of itunes on windows 8 to use it. I tried holding down ctrl and clicking itunes and after many tries got it to work one time. When I went back in later it had reverted

I have itunes directory on an external hard drive and want to direct a new installation of itunes on windows 8 to use it. I tried holding down ctrl and clicking itunes and after many tries got it to work one time. When I went back in later it had reverted back to a blank version of itunes and I cant get ctrl to work again. Any other ideas?

This is sometimes caused by a problem with the iTunesPrefs.xml file, normally found at C:\Users\<User>\AppData\Local\Apple Computer\iTunes\iTunesPrefs.xml. Try dragging this to the desktop and trying again.
Alternatively the problem may be that you have McAfee AV and it is preventing iTunes from updating the same file and thus causing the problem. See Why does iTunes delete my itunesprefs.xml? for details.
tt2

After download and installation of PS PE12 I have problems starting the programm. After selecting video and new project nothing happens, only the colorbar below new project is showing

New computer.
After download and installation of PS PE12
I have problems starting the programm, double clicking on the icon.
After selecting video and new project nothing happens, only the colorbar below new project is showing, nothing happens.
(expected was to activate the program and the sarting the PE12)
PSE12 runs fine
System:
WIN8.1 / i7 /16GB RAM

New computer.
After download and installation of PS PE12
I have problems starting the programm, double clicking on the icon.
After selecting video and new project nothing happens, only the colorbar below new project is showing, nothing happens.
(expected was to activate the program and the sarting the PE12)
PSE12 runs fine
System:
WIN8.1 / i7 /16GB RAM

When I clicked on Firefox, the update bar started but when it stopped Firfox would not open. The blue screen of death popped up and said something about a new installation. We restarted the computer and now Firefox will not open. Help!

When I clicked to open Firefox the update bar appeared and an update loaded. Usually when this happens Firefox will open up when the update is finished. This time it did not open. when I clicked on the icon again the blue screen opened and said something about a new installation and if this was the first time you have seen this screen restart your computer and try again. I restarted the computer and when I clicked on the Firefox icon the "hour glass" would appear like it was trying to open but it never would open. I don't know what else to do.

See below -- the way I asked the question the first time may not be clear. This post was a goof but I can't figure out how to delete it

Premiere elements 12, new installation, serial no. accepted, installation completed and new started, but does not run. I get following msg-box: "LoadLibrary failed with error 126: Das angegebene Modul wurde nicht gefunden."

premiere elements 12, new installation, serial no. accepted, installation completed and new started, but does not run. I get following msg-box: "LoadLibrary failed with error 126: Das angegebene Modul wurde nicht gefunden." Installation in German Language on WIN7 professional 64bit, Samsung SSD. What can I do to run that program?

Jurgen Freund
Premiere Elements 12 on Window 7 64 bit. What video card/graphics card does your computer use - AMD Radeon?
I have found this YouTube video on the subject of Error 126 with details for resolving the problem.
How to fix the ERROR 126 when you open OpenGL programs - YouTube
The link was contributed in an old 2013 thread here by the ID danneomarre (see post 6 of the following thread)
LoadLibrary failed with error 126: cant find the required
Please let us know if that worked for you.
Thank you.
ATR
Add On...When all is OK and working, please update 12 to 12.1 Update using an opened project's Help Menu/Update.

Updated as new installation 613 to 616 iphone 3GS, the 613 backup is nolonger listed, and all data gone. Anyway to restore 613 with data and update keeping data?

I chose new installation instead of update from 613 to 616. The new installation is missing all the data, and app data, notes, etc. The previous backup is nolonger listed, only new one for 616, anyway to restore 613 with data?

A backup was listed for earlier today, I did a backup before new installation. Once new installation, it did an auto backup of new installation, and only this one is listed.
This matches documentation, it says cannot restore to earlier version from itunes. Do I have to do a restore factory settings to see previous version backup, and restore this earlier version?

Transfer Songs from Ipod to New Computer and New Itunes Installation

Hi,
I want to transfer songs on my Ipod to a new installation of Itunes on a new computer. I get a message that my Ipod is synced to another library and that I can only be synced to one library and that my ipod will be erased and synced to the currently libary. The problem is my current library is empty since it's a new itunes installtion and I don't want to erase my ipod and delete all my songs.
So how do I transfer songs from my ipod to the new itunes installation on my new computer?
Thanks for any replies.

I think I've read in a post before that you can't do it that way. That you can only transfer music from the computer to the iPod, and not the other way around. I believe they suggested backing up your library (to disk, I guess) and installing it on the new computer. Something like that. It seems silly that the transfer only works one way, but there you are.

I cant open my iTunes and this is a whole new installation of snow leopard

Every time I open my iTunes app i get this message:
The folder "iTunes" is locked on a disk or you do not have write permissions for this folder...
What the **** does this mean?? this is a new installation of snow leopard and my only account is the system administrator so how the **** do I not have access?? Please help urgently!

Each time you connect your iPhone to iTunes, you need to eject it before closing iTunes by clicking on the little "eject" icon shown in iTunes. It seems that sometime in the past, you did not do that.
I'm not sure how to undo the previously done damage, but maybe a reboot of your Mac would help.

I am living in china and after installation of the new iOS the appstore and iTunes open in chinese. all language settings are in german. what can i do?

i am living in china and after installation of the new iOS the appstore and iTunes open in chinese. all language settings are in german. whar can i do?

If it still shows the icon, Settings, then General, (sixth one down), then international, (third one up from the bottom), then, at the top, has where you can select what language, I think English is at the top of the list. I hope I can help!

CS6 Bridge suddenly no longer opens jpeg images. Double click and drop-down menu do nothing. No new installation or changes.

CS6 Bridge suddenly no longer opens jpeg images. Double click and drop-down menu do nothing. No new installation or changes. Any ideas?

Consider resetting Bridge Preferences.
Close Bridge
Cmd+Opt+Shift held down, Open Bridge.
Choose Reset Preferences

Newbie and New Installation

Similar Messages

Maybe you are looking for