Newbie: Apex & EM how to after stop and start?

Hi I got an Amazon AMI and once I start and stop the instance or rebundle my AMI
The IP changes and Apex and EM does not work.
Is there a documentation on hnow to reconfigure them?

It's probably not worth to add all these sequences, local variables, and parallel loops. Here's a somewhat simpler version, showing two possibilities: 0:using events, 1: not using events. Pick one!
There are many other possibilities. It really depends what else there is.
Message Edited by altenbach on 10-15-2007 06:59 AM
LabVIEW Champion . Do more with less code and in less time .
Attachments:
StartStopMOD.vi ‏19 KB

Similar Messages

  • Service port not remapped after stop and start of embedded broker

    Hi everybody,
    I started testing embedded OpenMQ 4.4 build yesterday and was wondering if it would be suitable for our test cases. I needed to start and stop a broker almost around every test method. So I intuitively used start() and stop() methods for it. Of course test case failed after second test method :) I did some debugging directly in source code and found out that stop() closes server socket in port mapper. When second start() is invoked it determines whether the server socket is bound and in case it isn't, it stops the broker.
    But to the point... is it expected not to rebind the port when start is called after stop or is it classified as a bug that needs to be solved? Because if it would be possible to start and stop the broker repeatedly the instance broker can be reused and no init/shutdown needs to be called...
    Thanks for an answer.

    As I'm sure you know, that's the first promoted build of MQ 4.4 and it will have more testing before the final release.
    I would have expected repeated calls to start() and stop() to work, but as you have found, it doesn't, and I can reproduce your error easily.
    However it does look as if you can make repeated iterations of the complete init()/start()/stop()/shutdown() cycle, so this might be worth trying as a workaround.
    Yes, this is a bug which I have logged internally: we'll investigate before the final 4.4 build.
    Thanks for the report,
    Nigel

  • How do I stop and start a Swing Timer?

    I have created a Swing timer;
            new Timer(250, Task).start();but can't figure out how to use the .stop() and .restart() methods?
    How do I code this?
    TIA

    I found the answer;
      SimKitsControlTimer = new Timer(250, SimKitsControlTask);
      SimKitsControlTimer.start();Not as prevously written.
    I was trying to create an object with the .start() method at the end of the line. Doh!

  • How do I stop and start J2EE engine manually on WEB AS

    I have installed WEB AS ABAP + JAVA. For some reason J2EE engine is not up after the Java stack installation. How to I start and stop J2EE engine. The visual Admin is not connecting either saying connection lost.
    I am running on Linux
    thanks

    Hi Dhandu,
    Please have a look in the <a href="http://help.sap.com/saphelp_nw04/helpdata/en/6e/dd0041aafdf123e10000000a155106/frameset.htm">documentation</a>.
    Hope that helps!
    Vladimir

  • No acceleration after stopping and starting wccp

    I acceleration was working fine between my data center and a branch.  (I was copying files from my data center PC to a PC at the branch).   I wanted to demonstrator how much slower CIFS copies are without acceleration so I stopped wccp on the branch router (no ip wccp 61 redirect-list wae-nme, no ip wccp 62 redirect-list wae-nme).  As expected, the CIFS copies then were much slower.
    Then I restarted WCCP (ip wccp 61 redirect-list wae-nme, ip wccp 62 redirect-list wae-nme), BUT now the connection from my workstation at the data center to the branch shows up as pass through.
    A show stat conn on the branch NME shows other CIFS connections from other branch hosts, but my PC's connection is stuck in pass through.  How do I get my PC's connection to accelerate again?
    All WAAS devices are on 4.1.7.

    Tod,
    CIFS sessions do a decent job of reconnecting when there is a failure at the transport (TCP) layer.  It's likely that WAAS sees that the connection was already established (your ConnType would be PT In Progress).  You have to close the CIFS session (net use * /delete) and restart the transfer.
    Regards,
    Zach

  • How to make stop and start in one button

    Hello All
    My Question is how to make button that when I prees it first time work as stop button and when I press it second time work as start button, I hope if I found my answer soon.
    thank u all
    Best Regards

    It's probably not worth to add all these sequences, local variables, and parallel loops. Here's a somewhat simpler version, showing two possibilities: 0:using events, 1: not using events. Pick one!
    There are many other possibilities. It really depends what else there is.
    Message Edited by altenbach on 10-15-2007 06:59 AM
    LabVIEW Champion . Do more with less code and in less time .
    Attachments:
    StartStopMOD.vi ‏19 KB

  • How may I automatically stop and start Mail services at a set time please

    Hi folks. I was wondering if anyone could tell me how to automatically stop and start Mail services (or any other services) at a set time please in Leopard Server? Is there a script someone has created which might help?
    Cheers, David ( a realy newbie when it comes to administering OS X server)

    launchd works through a series of XML documents that define tasks to run, either at launch, on a time schedule, in response to network events, etc.
    So you'll need to create two .plists - one to start the mail server and one to stop it. They should be saved in /Library/LaunchDaemons. I'd suggest something like:
    /Library/LaunchDaemons/local.postfix.stop.plist:
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple
    .com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
      <key>Label</key>
      <string>local.postfix.stop</string>
      <key>ProgramArguments</key>
      <array>
        <string>/usr/sbin/serveradmin</string>
        <string>stop</string>
        <string>mail</string>
      </array>
      <key>StartCalendarInterval</key>
      <dict>
        <key>Hour</key>
        <integer>1</integer>
        <key>Minute</key>
        <integer>00</integer>
      </dict>
    </dict>
    </plist>
    and /Library/LaunchDaemons/local.postfix.start.plist:
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple
    .com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
      <key>Label</key>
      <string>local.postfix.start</string>
      <key>ProgramArguments</key>
      <array>
        <string>/usr/sbin/serveradmin</string>
        <string>start</string>
        <string>mail</string>
      </array>
      <key>StartCalendarInterval</key>
      <dict>
        <key>Hour</key>
        <integer>4</integer>
        <key>Minute</key>
        <integer>00</integer>
      </dict>
    </dict>
    </plist>
    You'll need to either use launchctl load /Library/LaunchDaemons/local.postfix.stop (or start) to load the tasks, or reboot your server.
    I'm curious, though, as to why you want to do this. Mail is typically one of the services that people want to run 24/7 so they don't miss out on any emails (even though SMTP can tolerate this). Why do you want to shut yours down?

  • IGS Stop and Start

    Hi Experts,
    How can i stop and start  IGS on RedHAT Linux servers.
    -cheers
    Venkat

    Hi my friend
    IGS variant is defined in start profile, so its processes is started or stopped along with the whole instance.
    Checklist:
    1. make sure IGS executable files exist in your kernel directory;
    2. make sure directory igs exists underneath /usr/sap/<SID>/DVEBMGSxx (or JCxx)
    3. make sure start parameter exists in start profile correctly
    Note 514841 - Troubleshooting when a problem occurs with the IGS
    Note 824281 - igswd does not start due to an incorrect start profile entry
    Regards,

  • How to stop and start only the process of Oracle Application Express?

    I'd like to know how to stop the process of Oracle Application Express on my server installed oracle express package.
    After installed Oracle Express edition, not only oracle database server processes but also Oracle Application Express, such as http server, is started automatically...
    I hope to stop and start Application Express on demand but is this feature enabled?

    Oracle Apex is an API, if that helps you understand / visualize. You do not start Apex process nor stop it.
    When an Apex session starts it starts calling the API.
    You can however start / stop the listener. It may be OHS, ApexListener and the J2EE container running it, OC4J or any other "server" that you are using.
    The built-in EPG is something like an API again, you cannot start / stop it but you can disable/enable it with DBMS_XDB.SETHTTPPORT API.
    Regards,

  • How to STOP and START the BO EXPLORER/POLESTAR - LINUX

    Dear friends,
    Could you please let me know on How to STOP and START the BO EXPLORER/POLESTAR on LINUX platform?
    Thank you,
    Nikee

    Oracle Apex is an API, if that helps you understand / visualize. You do not start Apex process nor stop it.
    When an Apex session starts it starts calling the API.
    You can however start / stop the listener. It may be OHS, ApexListener and the J2EE container running it, OC4J or any other "server" that you are using.
    The built-in EPG is something like an API again, you cannot start / stop it but you can disable/enable it with DBMS_XDB.SETHTTPPORT API.
    Regards,

  • How to stop and start RAC Database

    Hi,
    Can anybody tell me How to stop and start RAC Database.
    Pls give me the exact procedure for OS - IBM Aix 5.3.
    Rajkumar

    Burleson,
    It so appears, as from the numerous times you have been published incorrect, untested information, and non-working scripts, you are not an Oracle guru,
    but only a self-proclaimed one.
    It also appears nothing on your 'CV' can be easily verified.
    You state you are an 'adjunct professor emeritus', however anyone who was kicked out after a few months can call himself a 'professor emeritus'.
    Looking at the enormous amount insults and slander you have posted directed to me and others on this forum, showing a highly unprofessional attitude toward your peers,violating this forums rules of conduct, don't you think you deserved to be banned completely?
    After all, you are always promoting your own publications here, which is also in violation of the rules for this forum.
    What makes you think that "Sybrand" is a man's name? How many male Sybrand's do you know? I don't know any, not one.
    That's your problem. I'm as much as male, as you are a fat, ugly, self-proclaimed Oracle-guru, which you are clearly not, you are only a fraud, and this glares from all of your publications.,
    Sybrand Bakker
    Senior Oracle DBA

  • How can I stop and delete a download?

    How can I stop and delete a download?
    Bought a TV episode - it came with both the HD and standard version. Only want the standard. Can't get the HD version to clear from my available downloads. Help!??!?

    You cannot.
    let it download, then delete it.

  • APEX 4.2 aligning issue of Stop and Start Grid Layout item

    My APEX application application is in the process of moving from 4.0 to 4.2.  I am experiencing an issue with aligning (left margin justified) of Stop and Start Grid Layout items that have a border around them.  Earlier I had an issue with the border itself not showing up in the 4.2 application.  I was able to resolve that with a workaround by adding inline code in the CSS section of the page: #P23_OFFICE_START_TBL {width:682; border:1px solid #369; margin:5px;}. This created the border which I needed, but there are 2 Stop and Start Grid Layout items that are indented and not aligning with the border of the previous line.  I have tried a number of different things but none of them have worked.  This seems like a very simple issue to fix but I am having a tough time resolving it.
    I tried to put the item in question in a different grid, which corrected the indention but then I lost the border around the item.  It seems that the above CSS code does not work on the new grid.  I also tried to put attributes such as margin-left:5px; float: left; clear: left; float: left, in the CSS code but that did not work, too.
    Any suggestions?
    Thanks
    Ajay K

    I deleted and added back the Stop and Start Grid Layout items not aligning properly.  This worked.  Apparently, the 4.0 to 4.2 upgrade did not handle/convert these items properly.  Deleting and adding them back resolved the issue.

  • How to stop and start MDBs to listen for JMS messages

    Hello! This might be more of an architecture question rather than a technical questing, but I post it here, in the lack of a better place...
    For several years I have been using Webster and Webster MQ to send messages back and forth to clients. The architecture for the middleware platform has been designed around the functionality of ListenerPorts. Listenerports is a Webster functionality that let you "stop" and start to listen to JMS messages for a given MDB either by admin console, or by JMX.
    The arhitecture we used was something like this :
    1.Client sends a persistent message to a queue. (order)
    2. An MDB pics up the order message, calls a SessionBean that "fronts" the IIOP back end system.
    This is quite "out of the box" architecture, but we used the Listenerports to solve a stability problem for our back end system.
    The backEnd system was quite unstable, so the EJB threw an exception (typically because of timeout or connection refused) back to the MDB.
    The Listenerport was "defined" to handle 3 errors before stopping, so the MDB resent the message twice before the listenerport automatically stopped. The nice thing about this feature was that the client could continue to send orders, and was not bothered when the back end system was down.
    When the backEnd system was up and running, we could start the listenerport and it was all back to normal state. We even had a start script that checked the state of the listenerport every 30 minute, and started it automatically if it was stopped, making the admin task of starting the MDB unnecessary..
    Now.. Why am I telling this story..
    I would like to know how this could be done using "clean" J2EE technologies..That is..Not using any technology that is not portable..
    I`m playing with glassfish at home, and it struck me that there is nothing in the J2EE spec that defines the functionality described above ? Am i missing something ?
    I Do not want to stop My application because the back end system is down? That is the only way (i know of) that i can "stop" to listen for messages..
    I can put all the messages on an error queue when the backbend system is down, but that would lead to more code just to handle the error messages. Maybe the easiest way to solve this is to "move" (programmatically) all messages from the error queue over to the "standard" queue every XX minute, but somehow that sounds "wrong"
    Can anyone give me some advice to how this problem situation should be solved ? I`m interested in the solution both from an architectural perspective and from a more technical perspective..
    Best regards
    Hans-Jacob Melby

    Breakpoints, whether normal or conditional, are just meant for debugging of your code.  I had the sense from your question that the pausing you want to do is a part of normal operation of your code.  I would NOT recommend using a breakpoint for that situation.  It would bring up the block diagram showing the breakpoint when it occurs.  A user besides the programmer would not know what to do in that case.
     Yes, both the inner and outer loops would have shift registers.
    Putting a case structure with a small while loop inside the "Pausing Case" is doable.  It just depends on what you are doing or waiting for while the program operation is "paused".

  • How to stop and start process SAPOSCOL

    Hi, i have a problem with write access for saposcol program. I see that the file saposcol is read the file but its unable to wirte the same.
    Collector           : running
    Start time coll.    : Mon May 21 17:49:49 2007
    Current Time        : Mon Jun 11 13:27:51 2007
    Last write access   : Tue May 29 06:23:46 2007
    Last Read  Access   : Mon Jun 11 13:26:24 2007
    When i try to stop the saposcol i get the following error:
    igzadm> saposcol -k
    Setting Stop Flag :
    13:24:44 11.06.2007   LOG: ==== Stop Flag was set by saposcol (kill_collector()).
    13:24:44 11.06.2007   LOG: ====  The collection process will stop as soon as possible
    can't kill process 409656.
    kill: No such process
    ERROR:No reaction from collecting process 409656.
          Please kill collecting process.exes.
    Am doing this command through SID<ADM> from change directory /run.
    Please help me how to check the permission of the SIDADM to stop the services.
    I also try the same from root user but now use..
    Please guide me how to stop and start the SAPOSCOL in AIX 5.3.
    Advance Thanks.
    Suri Tyson

    Hi, i have the following permission for saposcol
    imserv:/ # ps -ef | grep saposcol | more
        root  118842  528422   0 14:02:17  pts/2  0:00 grep saposcol
    I have changed the ownership as you mentioned....
    imserv:/usr/sap/IGZ/SYS/exe/run # ./saproot.sh igz
    Preparing /usr/sap/IGZ/SYS/exe/run/brbackup ...
    Preparing /usr/sap/IGZ/SYS/exe/run/brarchive ...
    Preparing /usr/sap/IGZ/SYS/exe/run/brconnect ...
    Preparing /usr/sap/IGZ/SYS/exe/run/brtools ...
    Preparing saposcol ...
    Preparing icmbnd ...
    done
    However, i still get the error as:
    igzadm> saposcol -k
    Setting Stop Flag :
    14:12:13 11.06.2007   LOG: ==== Stop Flag was set by saposcol (kill_collector()).
    14:12:13 11.06.2007   LOG: ====  The collection process will stop as soon as possible
    can't kill process 409656.
    kill: No such process
    ERROR:No reaction from collecting process 409656.
          Please kill collecting process.
    Now the permission are set in my system as:
    igzadm> ps -ef |grep saposcol|more
      igzadm  729196  983058   0 14:13:25  pts/2  0:00 grep saposcol

Maybe you are looking for