Newbie ? Are these settings normal for K7T Turbo2?

Greetings All,
First I would like to say I really enjoy this forum. I have learned much. Also I would like to say that I am fairly new at putting together systems so if my questions are basic please forgive me. Thanks for your patience and your willingness to teach. OK, here is my system and my questions:
K7T Turbo2 v.5
Duron 800
2 sticks 128meg = 256
PSU Sparkle 300w; 150w combined (according to sales slip)
Asus 7100 Geforce 2mx 32 meg
SB 128 pci sound card
Western D 80gig special
Acer 52x CD
LiteOn 48x12x48
Win 98se
Most curent VIA drivers
I think that about covers it.
The questions:
1) I have seen a lot of discussion about voltage seetings so I am wondering if mine are normal? They are as follows:
Vcore = 1.55v
5v = 5.05v
3.3v = 3.27v
12v = 11.60v
2) This may need to be in the BIOS group but what are the optimum seetings for this board and my stuff?
3) When I boot up I notice that just about all my hardware is using IRQ11. Is this normal?
4) A while back I saw a lot discussion about ACPI. Is it best to use it or not? If you turn it off do you have to reload your OS?
I think that about does it for now. Thanks again for your help.
Dave

Ian,
Not that I am very technical and do sometimes get mixed up in my own settings...
I got a canon A1 and use the easy set up for HV 1080i50 on interlaced footage
and 1080p25 for the '25f' footage. When using the de-interlaced filter I hit the
upper field and I am having a major headache from time to time with sequence
settings and field dominance in particular with interlaced footage but do experiment
quiet abit to my even larger frustration. I do find the '24f' frames quite pleasant to
look at - maybe it is just because it is easier to work with I dont know, but interlaced
got a reputation of being difficult.
Likewise as far as I am aware then the '25f' canon setting is as good as progressive
some will even say 'same'. check out more here
http://www.dvinfo.net/conf/forumdisplay.php?f=138
Henrik

Similar Messages

What are these settings about?

In the editor workspace immediately below the photo you are working, on is a drop down tap which can display documents profile,documents dimensions,sizes, scratch sizes, timing etc. What are these settings all about I didn't see them mentioned in the manual? And then over to the left a area where it shows percentage. Percentage of what?
I'm using PSE5

This information is present in the help files.
Just open the help for PSE 5, and type the word 'status' in 'Search for' input for the product.
This will lead you to 'To display file information in the Info palette or status bar' page. It contains the answer to your query.
The percentage is to specify the Zoom percentage of your image.

Are these settings too high?

All I did was click on the Performance 3D in the settings of Clock Frequencies of my FX5600 128MB. I then clicked on Auto detect and it changed my settings all by itself. I did not manually move any of the sliders.
My Core Clock Frequency for 2D is now 270MHz and 3D is 372MHz.
So far, America's Army plays way better and I was even able to bump up many of the games settings too.
Are these settings too high?
Graphics Processor Properties
Video Adapter   nVIDIA GeForce FX 5600 (MSI FX5600)
GPU Code Name   NV31
PCI Device   10DE / 0312
Transistors   75 million
Process Technology   0.13u
Bus Type   AGP
Memory Size   128 MB
GPU Clock   270 MHz
RAMDAC Clock   400 MHz
Pixel Pipelines   4
TMU Per Pipeline   1
Vertex Shaders   4 (v2.0)
Pixel Shaders   1 (v2.0)
DirectX Hardware Support   DirectX v9.0
Pixel Fillrate   1080 MPixel/s
Texel Fillrate   1080 MTexel/s
Memory Bus Properties
Bus Type   DDR
Bus Width   128-bit
Real Clock   324 MHz (DDR)
Effective Clock   648 MHz
Bandwidth   10368 MB/s
Graphics Processor Manufacturer
Company Name   NVIDIA Corporation
Product Information   http://www.nvidia.com/view.asp?PAGE=products
Driver Download   http://www.nvidia.com/drivers

Both, but primarily the GPU will generate the most heat, either way, heat is a killer no matter how you look at it. Even if it is warm to the touch, that does not mean it's harmless. If it's warmer than the component manufacturer specs indicate, it shortens the life. As to the rate in which heat above a certain range actually shortens the life is better left to an electronics engineer or a spec sheet.
Do not overclock in 2d mode it's not necessary.
Probably not an issue if you have good cooling in your case and the ambient room temp is respectable.
If you want to overclock, let the 3d detect set it initially and then take the overall speed and reduce it by 5% or so. You may not notice failure right away if your eye is not trained to see the problems. So it's best to be conservative if you are not an experienced overclocker.
"Forget about performance in benchmarks and play the game"

TS3274 Videos won't play. Not YouTube or any other videos. I also have no sound. Are these common failures for a three year old gen 2 iPad?

Videos won't play. Not YouTube or any other videos (just started today). I also have no sound, keypad clicks, shutoff click, etc. Are these common failures for a three year old Gen 2 iPad?

For the issue with the videos that will no longer work, try closing all apps and then reboot the iPad.
Tap the home button once. Then tap the home button twice and the recents tray will appear at the bottom of the screen. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button twice.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
For the issue with sounds, you have system sounds muted.
Check the side switch above the volume rocker on the side of the iPad. Flip it the other way and see if you get sound from the apps, keyboard clicks, etc.
If not, double tap the home button to bring up the task bar at the bottom. In the task bar swipe all the way to the right. Look on the far left side and see if there is a speaker icon. If there is, tap it and see if the sounds on apps come back. Then tap the home button.
You can change how the side switch works to either lock screen rotation or to mute system sounds. You can go to Settings>General>Set Side switch to Lock Rotation or mute. If you choose mute, the switch will turn off apps sounds. Otherwise you use the task bar as described above to mute those sounds.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085

What are the settings required for QM in procurement

Hi Team,
What are the settings required for QM in procurement. I have set indicator for QM in procurement in QM view in material master.
I am not clear about following fields to be maintained in QM view.
QM Control Key
Certificate type
Target QM system
Tech. delivery terms Indicator.
Please suggest me in which case to be used this fiels. Is it relivant to Quality Certificates.
Thanks

Hi,
All meaning are
QM Control Key :
If you activate the indicator for QM in procurement in the material master record at the client level, you must also store a control key at the plant level for quality management in procurement.
Certificate type :
Certificate types applies to the Certificate processing in procurement & Certificate creation
Target QM system :
whether the vendor's verified QM system, according to vendor master record or quality info-record (for a combination of vendor/material) meets the requirements for QM systems as specified in the material master
- If you activate the indicator for QM in procurement in the material master record at the client level, you must also store a control key at the plant level for quality management in procurement. If you want Procurment control then accordingly define Control Key.
- If you want Vendor's perticular certificate for Material then you have to define Certificate type.
Also, you have to maintain Material, Vendor's Info record at plant level.
Thanks,
JM

After replace the ATX case for K7T Turbo2 mainboard???

hi, Master outhere help plz...
after replace the ATX case for K7T Turbo2 mainboard??? why not boot up on screen any more , but power running is ok for the CPU fan , if i forgot any thing from this stage plz guide me the step.
thank for kindly supports soon...

psu max amps better than in old case ?
got to many stand offs under the board shorting it out ?

ACE 4710 what are these ports used for?

Hello, what are these ports used for please? What can I do with them?
Thank you
Sent from Cisco Technical Support iPhone App

Hi Bilal,
They are reserved for future use. Please have a look at the link below:
http://www.cisco.com/en/US/docs/app_ntwk_services/data_center_app_services/ace_appliances/4710/hardware/installation/guide/Overview.html#wp1043136
Regards,
Kanwal

Are these Chargers good for an iPod?

Hey everyone. Listen, today I went in town and had some time to buy some stuff.
Now i needed a charger for my iPod Touch 4G. I didn't buy the one from apple with 30 euro, i just got something else, that should do the same job.
But I'm a bit unsure that it's working well.
On the back if I can read:
Input: 100-240VAC
0.3A 50-60HZ
Output: 5VDC---1A
And the one for the car is like:
Input: 12-24Vdc
Output: 5.0Vdc --- 700mA
Now I don't know if this is healthy for the iPod. Is it? o.O
I used the one for the car (and i think the iPod is heating). That doesn't look good...
Is this my imagination? or do these things really hurt the iPod?
One other funny thing that happens. When I used these chargers, for some reason, the Audio disappears. If I open up music and so on, the volume level bar is vanished.... is that normal?
Anyway, the main question is: Are these things safe??? o.O
Thanks

I use a basic Samsung phone charger for my Ipod Touch. It outputs the same 5.0v --- .7 A.
When it overheats, thats just the battery charging.
I've used the same charger on all my ipods for 3 years now.... and they all have continued to work just fine...
You can use them safely.
Other then that, I have absolutley no idea why your audio bar may dissapear. It's most likely a powersaving feature... In otherwords, check your settings.
Hope This Helps

New BIOS for K7T Turbo2

I just downloaded the latest BIOS from your site (W6330VMS.360) and was planning on installing an Athlon XP 2600+ CPU. I was expecting to see a CPU multiplier of 16 available in the BIOS settings but it only goes up to 15. Can I still install a 2600+? What would the multiplier be?

Quote from: zillafan on 07-December-06, 21:41:20
I just downloaded the latest BIOS from your site (W6330VMS.360) and was planning on installing an Athlon XP 2600+ CPU. I was expecting to see a CPU multiplier of 16 available in the BIOS settings but it only goes up to 15. Can I still install a 2600+? What would the multiplier be?
Hello,
should be x16 Multi. i can't see manual selection for x16 multi too.
in BIOS description: -Support AMD XP 2400+ & 2600+ (K7T Turbo2 only)
i have checked inside and confirm that 2600+ ratting exist(323630302B@00009EA0)
i guess you should leave/setup "CPU Clock Ratio" to Default(not to override/force custom values), BIOS will ask CPU for his default multi by vid and should apply correct one.
think should be fine

Where are proxy settings stored for JRE 6

Where are the http proxy settings stored for JRE 6? I am trying to figure out how to centrally manage these settings for a large number of computers. I have heard about the deployment.properties file, however changing this file is not changing my proxy settings.
Thanks for you help.

Hi All,
Thanks for the info. I think this is what I need, but I opened the Javascript console and pasted in the code and nothing happened.
(Programming, javascript, etc are not my area of expertise. My core competency is writing/editing.)
What else do I need to do to make the Console recognize and respond that line of code?

Are my settings correct for .m2t transfer through mpeg streamclip?

hello,
i shot a video on the **sony hvr z7u** using compact flash cards and the video was shot on 1080i ...all the files are currently in m2t...
i used mpeg streamclip and used the follow settings:
-apple pro res 422 codec
-100 percent quality
-uncompressed sound
-frame size: 16:9
-interlaced scaling was checked
are these acceptable? some of the footage doesnt look good with dark colors, but it might just be the way it is shot...
thank you!
steven

The Holy Grail in M2T conversion. Say it 3 times: clipwrap clipwrap clipwrap
The only program that easily rewrap m2t files into QuickTime movies Faster than transcoding
No generation loss. I have an nNovia Digital Drive to record my HD files from a Canon XH A1 camera. The M2T files were horrible to work with. No converter worked. Sound did not sync, Video artifacts, unusable. I downloaded trial- converts first minute and it worked GREAT! Bought it $49.99 very fast conversion. NO LOSS! I am in love! http://www.clipwrap.com

What are these recovery disk for??460668-001, 460669-001 and drivers 466267-B22

I had purchased these recovery disk for a laptop that I was repairing. I want to give them to the person but need to kow what laptop they go to. The first two are recovery and the third is the applications disk.

Hey,sc6lou.
What notebook did you order those disk for ?
Is there anything else on the cover of the disk or just the # ?
THX

Where are the settings/preferences for firefox?

I am trying to find the settings/preferences for firefox but I updated my firefox and now cannot find them.

Why didn't I think of that .... In any event, I found the answer. The issue lies within the "automatic proxy detection" selection. If its selected and OSX cannot determine the proxy, this causes a cascading failure on upgrade websockets using ws:// protocol headers. You need to uncheck the automation, and the manual HTTP and HTTPS proxy settings will be used for all protocol headers that originate from HTTP/S including the WS handshake upgrade and connection protocol.

Best driver for K7T Turbo2 version 5.0

I am looking to find out which version of the VIA drivers would be the best to use.
K7T Turbo2 Version 5.0 (MS-6330)
Windows XP Home Edition
THANKS!

The d bracket led was an optional thing along with a 6th isa slot.
I don't have either one.
Help Please.

HT1178 What the difference is between WPA and WPA2 and how are these settings affecting the access of other computers to the internet through my Time Capsule

I have a Time Capsule of the 4th generation and I am pretty impressed since I just had a fried harddrive on my 3 month old Imac and Time Capsule restored it fully including all programs etc. without having me to put in all serial numbers etc. for that I give it an A+. However what I find very frustrating is the very short and incomplete user manual and setup instructions. I give those a D-. It does not explain the consequences of certain choices to a normel non computer gig user like me:
I do not understand what the consequences and difference is between the security setting WPA/WPA2 and WPA2 when setting it up. It would be helpful if the manual would explain something like: If you set it onto WPA2 then computers older than XXX years will not able to hook up to the internet through your router...or the likes, since I slowly supect this may be the reason for some of my troubles.
I also have a 5 year old PC with vista connected to the Time Capsule. It can wireless connect to the Time Capsule and access the printer (I have managed that after some painful hours...) but it cannot access the internet with that PC through the timecapsule wireless, only if I hook it up with a cable. Why? Does that have to do with the fact that I have set the TIme Capsule to WPA2?
Our PS3 can connect wireless, no problem. However, I friend of mine tried it with a quite new Toshiba Notebook and he could see the Time Capsule but again it shows the line from the Time Capsule to the internet blocked. All other computers linked with data cable to the Time Capsule are connected to the internet no problem. What have we done wrong? Should I change the security setting to WPA/WPA2?
I tried the latter, but then another problem does come up, which was there from beginning on: When I change the settings for my Time Capsule my Imac suddenly cannot find the Timne Capsule anymore, even so I am only 3feet away from it. When I set it up for the first time 3 month ago it drove me crazy. The very first time it found the Time Capsule right away. But when I discuverd a mistake in my initial setup and I went through the settings again to change stuff it suddenly could not find the Time Capsule anymore. Only after frustrating 20 times or so with turning wi-fi on and off several times inbetween did it suddenly find the Time Capsule in the set up menu. However, when I tried changing my security setting to WPA/WPA2 today to see whether this solves my other problems again it could not find the Time Capsule when I was finished with the settings and I had to give up/cancel. Why is that???
I would really appreciate some help here. But please I am not a computer gig and normally always had assistance with these things. On the other hand I am not all stupid either (even so these manuals assuming we all grew up sleeping on a computer make me feel stupid).....
Thank you all in advance

Hello Schimi. The Time Capsule is a kind of product that offer you two possibility:
- To use the TC as a router or as an external HD.
The difference between WPA and WPA 2 are:
- They are two kinds of internet connection.
WPA uses dynamic key encryption , which means that the key is constantly changing and makes the invasion of a wireless network more difficult than WEP . WPA is considered one of the highest levels of wireless security for your network and is recommended if your devices support this kind of encryption . Newer routers offer WPA2 security . WPA2 is compatible with WPA , but offers higher security level . In fact, it meets the high standards of many government agencies . If the router and computer support WPA2 , this should be your choice.
If you need any help or if you find some difficult setting up it you can contact Apple Support.
I am sure that they can help you with that.
I am sory for the delay. I holpe that you solve your issue.

Newbie ? Are these settings normal for K7T Turbo2?

Similar Messages

Maybe you are looking for