(newbie)Configure SMTP?

Anyone knows how can i configure SMTP??
The only thing that i have is the IP.
that is 192.168.200.1
Where do i put this IP number?
props.put("mail.smtp.host", "smtp.mail.example.com");

Anyone knows how can i configure SMTP??
The only thing that i have is the IP.
that is 192.168.200.1
Where do i put this IP number?
props.put("mail.smtp.host", "smtp.mail.example.com");If the IP addr is the addr of your SMTP mail server, just put it as:
props.put("mail.smtp.host", "192.168.200.1");
Hope this helps.

Similar Messages

Configuring SMTP Namespace Sharing between two Exchange Forests on the same LAN

Hi guys, really hoping that someone can help me with configuring SMTP Namespace Sharing between two Exchange Forests on the same LAN.
Basically, I have created a new forest and installed a new exchange organisation in this forest. Both forests are located on the same IP subnet and a two way trust has been created between the forests. Federated sharing has also been configured.
I can use ADMT to migrate the user and computer accounts to the new forest and also migrate test mailboxes over. Ideally, I want to be able to do the mailbox migrations in stages so will need to be able to have mail flowing between the two forests.
I have read over the following article (http://ibrahimnore.wordpress.com/2012/09/06/configuring-smtp-namespace-sharing-between-two-exchange-forests-part-2/)
which is good but it's demonstrating over the internet, can anybody advise how this can be achieved on the local LAN?
Any help greatly appreciated :-)

Hi Gilliano,
Thanks for correct link. I must say this is a very good article indeed, I read the entire article and if you go to the 3rd part of this article, please note the text "DOMAINC.COM is configured as Internal Relay Accepted Domain on both the domains"
This is exactly what I asked you to check. Personally, I understand the method described in this article will work but its very complex to manage and administer, while the easiest option is to configure internal relay at the first place and no need to make
so many DNS changes and customizations to your environment.
The solution really depends on what your requirement is - Since you mentioned that you are migrating stuff over from source to destination - I feel this article is too complex for your situation and not really worth (for your requirement). The setup described
in the article is an excellent choice if you are planning to keep both forests alive for longer duration due to several reasons like compliance or company mergers and so on...
please let me know if my explanation is not clear enough.. we can even even have a one-on-one email conversation too!
All the best!
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. Regards, Siva

How to configure SMTP for iCloud?

I have never used the Mail program on my macs. I started using Eudora in 1995 and when Mail came along some years later, i didn't take to it, it didn't have the functionality i needed and enjoyed. Fast forward to a couple days ago, my Snow Leopard MacBook is wearing out and i got a new MacBook Pro running Mountain Lion. When i was setting up the new computer, i thought iCloud would be configured automatically. It wasn't because i have a couple of different Apple IDs but i think that is straightened out now and i'm signed in using the me.com email address and have my calendars and contacts syncing with iphone and my other computer. Mail is working, but only for my me.com email address which i rarely use. I mainly use a gmail address.
I don't want to use Mail and i don't want mail to be downloaded to it. That happened on my other computur, so that i had tens of thousands of messages in a program i never open and don't use. So i somehow turned it off so it no longer gets the mail from my other accounts. i don't want to receive email in Mail. But because i can't use Eudora in Mountain Lion, i need a new email client. Today, i downloaded and installed Mail Mate, i want to try it out. When I tried to use Mail mate to send an email i got a message saying "No SMTP server configured for iCloud." i googled how to configure SMTP for iCloud and what i found said it configures automatically. So i don't know what to do. I went to ICloud in system preferences and i don't see anything i can do there.
Is there anything i can get it to do to configure automatically? All my software is up to date, if that makes a difference.

i was persistently googling search terms for this problem and came across a link that gave information to the effect that for non Apple email clients, SMTP has to be configured manually, and the settings were provided. I entered them into Mail Mate and now it works. So thankfully, this problem is solved.

How to install and configure smtp on iis 7 on windows 7

how to install and configure smtp on iis 7 on windows 7?
Thanks!

Here is an article that you may find useful http://eriglen.blogspot.com/2013/01/step-by-step-configuring-automatic-storage-management-on-standalone-server-with-oracle-enterprise-linux-and-oracle-11g-R2-using-external-storage-managed-by-openfiler.html

How to Configure SMTP Port in ODI

Hi,
Someone know how to configure SMTP port in the ODI tool? I tried changing the port number in the odiparams but I still encountered an error:"Could not connect to SMTP host." when executing the odisendmail package object though I can access the SMTP Server thru tracetcp.
TIA,
Cathy

950484 wrote:
Hi Bhabani,
Thanks for the quick response :) . I saw your post and its a nice approach in sending mail instead of using an odi package object odisendmail. However, the requirement is not to use the gmail credentials but to use the credentials provided to us. But I noticed that the port used for the SMTP server is not the default port number which is 25. So I am guessing that the reason why I cannot connect to the SMTP host is because of the port number. Do you know how to solve this?If you want to change the SMTP port then do the following
edit smtplib.py located at <ODI_HOME>/oracledi/lib/scripting/LIB
change SMTP_PORT to what ever port you want .
restart ODI
execute your mail sending program

Configuring SMTP in SAP for other Domain(GMAIL,YAHOO ETC)

i have configured SMTP configuration in SAP........now the problem is mail is going from SAP to local domain,i want to send it to other domain also like yahoo,gmail etc.......plz help me by telling configuration in SAP

hi
good
go through these links
http://kb.hughesnet.com/al/12/2/1047.htm
http://help.sap.com/saphelp_webas620/helpdata/en/af/73563c1e734f0fe10000000a114084/content.htm
thanks
mrutyun^

Configuring SMTP account for Endpoint protection alerts

Hi all
I am using SCCM 2012 R2 Endpoint protection. I want to configure email alerts for Endpoint protection. I have mail server in Windows 2008 R2 server in a WORKGROUP. Since mail server is not in domain , how can i configure SMTP server setting. What account
i need to use for SMTP?

You can get advice from others on the forum Ashok but ultimately you are the only one that will be able to figure this out. You need to look at your mail server (or talk to the person that manages it) and see how it is configured to allow email relay from
the firewall, for example. It could be that the mail server is configured with a rule to allow relays anonymously from that specific IP address.
You then need to configure the email server to allow the requests from the ConfigMgr server in exactly the same way. It might be as simple as adding the IP address to the above rule. You will NOT need to configure an Endpoint Protection SMTP Server Connection
Account. As Joyce says this is only required if the mail server REQUIRES authenticated access (but you can configure the rule so that it doesn't).
"they just use SMTP server and a email address for authentication"
This isn't the case Ashok. This is not authentication. The email address is just a label so that you can see where the alert is coming from.
I hope this is all clear. This isn't a ConfigMgr issue as such. It's email relaying so is specific to the email product you use.
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

Settings reqd in TCode SCOT to configure SMTP

Hi,
I am in the process of configuring SMTP. I have done all the ICM settings and settings in TCode SICF.
This is an external SMTP server and to be able to use it as a smtp server there is master username and password. For this case in SCOT do I have to use the default SMTP node or create a new node of type RFC?
Can any one please guide me further configuration steps.
Thank you,
sam

Hi,
Note 455140 - Configuration E-mail, fax, paging/SMS via SMTP
1. System user
In each client of an SAP system, a system user must be created to process the incoming messages. To do this, use transaction SU01 to create a user of the type "system" and assign the "S_A.SCON" profile to this user.
2. In transaction SU01, enter the Internet mail address of a user in the "E-Mail" field under "Address".
3. Client assignment (transaction SICF)
a. In the Logon data (SAPconnect) Provide the client and the user created.
b. Activate the node SAPconnect.
4. SCOT
a. Use the default SMTP node.
b. check the check box (Node in use) in "General Information".
c. Provide the Mail host in "SMTP Connection".
d. click on internet in "Support Address types".
e. provide a * in "Address area".
f. For "Output Formats for SAP Documents" the following is recommended:
   SAPscript / Smart Forms       PDF
   ABAP List                            HTM
   Business Object / Link          HTM
   RAW Text                             TXT
5. Default domain in SCOT.
The domain of this SAP system client is defined here, for example, crm-prod.company.com. It is used for the following purposes: The SMTP plug-in logs on to the mail server with the domain as ID. The message ID of outgoing mails is compiled with this domain. If an SAP user who has not entered an Internet mail address in their user master record sends an e-mail, a sender address is generated from the SAP user name and this domain, for example [email protected].
In Menu
settings --> Default Domain.
e.g crm-prod.company.com
6. Send job
E-mails that are sent from an SAP application are merely put into a queue. A periodically running background process, the SAPconnect send job, takes the e-mails from the queue and sends them via the Internet. This job can be scheduled from SAPconnect administration as follows:
"View" --> "Jobs". Check whether a job is already scheduled (displayed as a calendar icon).
Choose "Job" --> "Create", and specify a job name.
Place the cursor on the "SAP&CONNECTALL" variant and choose "Schedule Job".
Choose "Schedule periodically".
Specify a time interval (for example 10 minutes) and choose "Create".
Thanks,
Tanuj

Where to configure SMTP services .???

Hi Experts,
If you want to allow users to send e-mails outside the company domain using the portal. where to configure SMTP server settings in the portal for achieving this..? I need the path to configure SMTP services..

Vineet,
This wiki should help you to get started.
http://wiki.sdn.sap.com/wiki/display/EP/MSOutlookConfigrationguideForSAPPortal
Cheers!
Sandeep Tudumu

Unable to configure SMTP settings in OATS admin

Hello,
I have installed OATS 9.20 in my pc,when i tried to configure SMTP settings in OATS admin,it is not working and giving an error message "error while sending mail"when i clicked "Test Mail".Can any help me in this?

Hello Jamie,
Thanks for your response
Yes,I have the permission.Actually here there are two systems in which OATS is installed,one of the system OATS 9.01.0157 is installed and in this SMTP settings is working fine.
Thanks,
Sandeep

How to configure SMTP dynamic send port?

Hi,
I am trying to configure STMP send port to send emails, enabled SMTP Server on the DEV box and configured it as described in the link below.
https://sandroaspbiztalkblog.wordpress.com/2013/05/09/biztalk-2013-installation-and-configuration-install-and-configure-smtp-server-feature-part-4/
Able to send emails using Telnet client, and these email get stored in C:\inetpub\mailroot\Queue folder.
I have a dynamic send with following values.
msgEMail(SMTP.CC) = “[email protected]”;
msgEMail(SMTP.DeliveryReceipt) = False;
msgEMail(SMTP.From) = “[email protected]”;
msgEMail(SMTP.ReadReceipt) = False;
msgEMail(SMTP.Password) = “XXX;
msgEMail(SMTP.Username) = “DDD”;
msgEMail(SMTP.SMTPAuthenticate) = System.Convert.ToUInt32(XX.SMTPAuthenticate);
msgEMail(SMTP.SMTPHost) = “smtp.domain.local”;
msgEMail(SMTP.Subject) = “sdfgdfgd;
msgEMail(SMTP.MessagePartsAttachments) = 2;
Message gets suspended with the following error message.
A message sent to adapter "SMTP" on send port "XXX_DynamicSendPort_XXXX" with URI "mailto:
[email protected]" is suspended.
Error details: There was a failure executing the send pipeline: "Microsoft.BizTalk.DefaultPipelines.XMLTransmit,
Microsoft.BizTalk.DefaultPipelines, Version=3.0.1.0, Culture=neutral, PublicKeyToken=81bf3856ad764e35" Source: "XML assembler" Send Port: "XXX_DynamicSendPort_XXXXX URI: "mailto:localhost" Reason: Data at the root level is invalid.
Line 1, position 1.
MessageId:
{3C50F418-24C4-4661-9B34-4B7F5F6FBBA4}
InstanceID: {2F6B9A0E-92EE-4953-81D2-9A124FAC99CE}
Please can some advise me what is wrong here? do you think I have configured
msgEMail(SMTP.SMTPHost) property correctly? Or should it be the name of the DEV box?
Thanks
SS
Shiva Sadayan

Hi Shiva,
You should not be using XMLTransit pipeline at the send port.
Perhaps you should go with default passthrough pipeline or
Create a send pipeline with MIME/SMIME encoder and drop it at Encode section of pipeline. Accept the default settings for MIME/SMIME encoder and use it with the dynamic port.
I found this article very useful while sending email from BizTalk. Refer:
Sending Emails in Biztalk
Rachit
Please mark as answer or vote as helpful if my reply does

How to I configure SMTP?.

I have configured with one mailbox server but it throw the following error
"Failure sending email: com.waveset.exception.ServiceNotResponding: 
==> javax.mail.AuthenticationFailedException: 535 5.7.3 Authentication unsuccessful.&#xA "

How to I configure SMTP?.The following section in Configuration "System Configuration" is for SMTP:
<Attribute name="serverSettings.default.emailtemplate">
<Object>
    <Attribute name="smtpHost" value="@email_smtpHost@"/>
    <Attribute name="fromAddress" value="@email_fromAddress@"/>
    <Attribute name="toAddress" value="@email_toAddress@"/>
    <Attribute name="authEnabled" value="@email_authEnabled@"/>
    <Attribute name="userId" value="@email_userId@"/>
    <Attribute name="password"><EncryptedData>@email_password@</EncryptedData></Attribute>
    <Attribute name="ssl" value="@email_ssl@"/>
    <Attribute name="port" value="@email_port@"/>
    <Attribute name="ignoreCert" value="@email_ignoreCert@"/>
</Object>
</Attribute>Values enclosed by @ characters are placeholders.

How many ways we can configure SMTP Mail server on windows to get CCP mails

Hello IAC's,
I have configured SMTP server and teleneted in CCP server and also I'm receving mails too when I submit the orders.
I wondered with an update given by my friend that he is using pmail server for SMTP mails.
Can any one suggest me in how many ways we can enable the SMTP server.. on windows..??
Thanks,
Noor.

Hi
if i use String provider = "imap"; then it shows the following error message..
javax.mail.MessagingException: Connection refused: connect
at com.sun.mail.imap.IMAPStore.protocolConnect(IMAPStore.java:479)
at javax.mail.Service.connect(Service.java:275)
at javax.mail.Service.connect(Service.java:156)
at javamail.AllPartsClient.main(AllPartsClient.java:39)
Caused by: java.net.ConnectException: Connection refused: connect
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:364)
at java.net.Socket.connect(Socket.java:507)
at java.net.Socket.connect(Socket.java:457)
at com.sun.mail.util.SocketFetcher.createSocket(SocketFetcher.java:232)
at com.sun.mail.util.SocketFetcher.getSocket(SocketFetcher.java:189)
at com.sun.mail.iap.Protocol.<init>(Protocol.java:84)
at com.sun.mail.imap.protocol.IMAPProtocol.<init>(IMAPProtocol.java:87)
at com.sun.mail.imap.IMAPStore.protocolConnect(IMAPStore.java:446)
... 3 more
pls any one give idea

Steps to configure smtp mail for a BI system

Hi,
Can anyone please give me steps to configure smtp mail for a BI system.
Thank you,
sam

Hi,
Hope this note is helpful.
455140 Configuration E-mail, fax, paging/SMS via SMTP.
Thanks,
Tanuj

How to configure SMTP server for osb 10.3.1

Hi All,
Can anyone share information on how to configure SMTP server for osb 10.3.1
and then how to send an email from osb 10.3.1
Thanks in Advance!!

Thanks a lot!!
I configured the same way. When I am sending email to an account on the same domain as my SMTP server is the sending of email is successful. But its giving error when I am trying to send an emain to an account which is on different domain. It giving error as "Operation has been cancelled"
Please suggest something.

(newbie)Configure SMTP?

Similar Messages

Maybe you are looking for