Newbie ? - Creating Grid Lines On JSVGCanvas?

Hi All-
I'm new to Swing and would really appreciate any assistance anyone could give me with this. I would like to create some grid lines as a background on a JSVGCanvas for some Icons that will be populated on the canvas when the Icon is selected from a JTree by the user....
How might I go about drawing the grid lines on the canvas?
Thanks in advance for your time and help!
-Jeanna

For my opinon just enable the network key and the network will be secured.
Set it WEP or WPA.
Regarding VLAN for wirelessis only applicable if you have a POE accesspoint connected to a vlan switch
Hope this helps.

Similar Messages

How do I remove unwanted dark grid lines from my Basic_Graphic_Textures?

Basically, I have been having dark grid lines show up in files I create in Illutrator CS6 as of late. This particular instance is surrounding a background layout im trying to create. I select a 650x500 rectangle and apply a patterns fill. To be specific, Patterns--->Basic Graphics--->Basic_Graphics_Textures-----Diamonds. No matter what I do, there is a dark grid benath the fill. It shows up in any fill I have been doing lately.
The above image is a layout with 3 layers. 1 white layer(bottom), 1 red/pink layer(middle), and the top layer being the rectangle/diamond fill.
This only happens with pattern fills and with fluid repeating text fills. Normally, the dark lines are full squares, but in the above image they are only running vertically. Any suggestions would be greatly appreciated. I'm not sure if this is just a hardware issue with my graphics card, or if I'm missing something else.

The patterns are for filling space with a repeating pattern but have some problems as you are discovering. Try dragging the swatch for the Diamonds texture from the Swatch panel to a file you have open. You can see how the pattern is created. Notice the overhang on both sides. Does this look like your problem?
By changing the stroke of the line in the Diamonds pattern to 0.25 and replacing the swatch I have to go out to 50% size to see the repeat like this

Line Chart does not display grid lines for x-axis (apex 2.0 / 3.0)

Hello,
is there an option to display x-axis grid lines?
I set up an SVG chart (Line) but only IE displays y-axis grid-lines. I set the "Show Grid Line" - value to "enable"
Does any body has an idea how I told apex to display x-axis grid lines also.
Btw: only MS Internet Explorer displays the grid lines, I use firefos 1.5.0.10 -> no grid lines are displayed.
The table how I create the chart are as follows
select null link, label, value
from
SELECT 1 Value , 1 label FROM dual
UNION
SELECT 3 Value , 2 label FROM dual
UNION
SELECT 5 Value , 3 label FROM dual
UNION
SELECT 2 Value , 4 label FROM dual
Thank you for helping me !!
Message was edited by:
athor

I changed this and put usage of UTL_FILE into a dynamic PL/SQL. The package will
compile and work unless you want to create debug information. If yes, then it will raise an
error message. So, you don't need UTL_FILE execution priviledge from your DBA.
I opened the package and you may modify it the way that you don't need any public
synonyms and no UTL_FILE to run it.
There are so many questions in this forum related to "What is my DBA going to say?" or
"How is he going to react?". Even for some minor issues. I have myself also seen some
of similar situations and the only thing I can sey is:
You got to use that powerfull tool Oracle Database instead of hiding it away from your
users and developers. Learn how to control it instead of prohibiting access to it! Otherwise,
it's just a waste of money.
Denes Kubicek

JTable Grid Lines became very light when changed to JGoodies L&f

After changing to the JGoodies Look and Feel, my Table Grid Lines (Row and Column Lines) look very light. They are hardly visible. The former orinignal black grid lines looks light as gray. Is there a way to change the color of Grid lines using the Table Renderers or do I need to do anywhere else
Can you help me in that. I checked through the API but did not find a function to set so..
Update to my Question_
I have placed the below statement in my Overridden getTableCellRendererComponent method as the first statement
table.setGridColor(Color.red);
The probelm is everytime I switch windows (between my application and any other program), my application is almost dying (GUI gets completely screwed) until I keep clicking on the Application and then it gets back
Edited by: hemanthjava on Nov 10, 2008 5:25 AM
Edited by: hemanthjava on Nov 10, 2008 5:27 AM

I am not expert in these, but please check out the following things and see whether it would solve your issue. (All these changes can be easily rolled back in case I'm wrong :). So make note of what you do)
As per your httpd.conf, you have chosen an automatic configuration of Apache by OWCI installer itself. What it does is create an imageserver.conf file in a separate directory and these settings will be included in your httpd.conf as you can see in the first line: Include "C:/bea/alui/plumtreeconf/".
If you check the imageserver.conf in that location, you would find a line like: Alias /imageserver/ "C:/bea/alui/ptimages/imageserver/". This aliases the original path "C:/bea/alui/ptimages/imageserver/" to /imageserver"
To confirm whether this is done right, check the following:
1. Acces 'http://<server ip / server name / localhost >/' from your browser
This should display the Apache home page (as per your httpd.conf, it uses the default port 80; so no port number required)
2. Access 'http://<server ip>/imageserver/' from your browser
This should display the directory structure (if its not disabled) inside your 'C:/bea/alui/ptimages/imageserver/' folder. Also confirm that all the subfolders are accessible.
3. If all the above is right, it means that your imageserver settings are right. Please check your portalconfig.xml for the correct settings: For example, <setting name="HTTPPort"> should be 7001 in your case. If its something else, change it and restart Weblogic for the settings to take effect.
Hope this helps.

Help: matrix report grid lines missing for null values only on server side

Hi,
I created a matrix report in pdf format. The output in great when run through report builder locally, it renders all necessary details. However, after the report being moved into AS server, the report does not show grid lines for null values.
It looks to me this has something to do with configurations and hope someone know what needs to be done.
Any suggestions are greatly appreciated.
Jimmy

Thanks for replying.
DESFORMAT is PDF.
There should be a fix as I had same issue with same Oracle version at my previous company. DBA fixed the issue on AS server.
I found your post on 09/28/2010 with a link to patch set: Re: Null value fields disappear in pdf output format
We worked out with the work around without install the patch.
Jimmy
Edited by: WJHORA on Sep 8, 2011 2:16 PM

Grid Lines not appearing in Query

Hi all,
I have a query in BI 7.0. The problem is the Grid lines & the Formats are not appearing in the query i.e the row & column lines are not appearing. These were there before 2 weeks but now something has happened and it got changed. So, if i create a workbook from this query, the workbook also reflect the same format. Even if i make the format changes through excel functions, i could only save it as a workbook and it wont reflect in the query.
We are not able to identify exactly why this problem came. It doesnt have anything to do with the Package or patch. This problem occurs only for one query & all the other query formats are working fine. I compared the error free queries with the problem query but everything seems to be the same.
Please help me in solving this problem.
Thanks,
Murali

Hi Everyone,
The issue is solved. The option "Adjust Formatting after Refreshing" in the Query Properties was unchecked. I checked that & the problem is solved.
Thanks,
Murali

Beat mapping glitch? Can't move grid line.

Greetings,
I'm trying to synch my tempos to film. I "conducted" the tempo in by tapping the tempo into a midi track, then used beats from region. The tempo was very close (though for some reason it still didn't match up exactly as I had tapped it???) but either way, to repair any imperfections I try to grab a grid line and move it to the appropriate place, but the grid line doesn't move nor does it create the diagonal line from the top that it's supposed to according to the numerous how to videos I've watched. One person said this is a Logic glitch that you can work around by creating a new tempo marker and deleting, but that didn't do the trick. Any suggestions?
Thanks!

Logic snaps to relative grids by default. So for example if your sample starts/ends at bar 1 1 1 072 it will snap to 1 1 2 072, 2 1 1 072 etc. To make it snap to the absolute time, click on the snap sub-menu where you select the snap value. In the list that comes up you'll see an item 'snap to absolute value'. Click on it. When this option is checked logic will snap to whole beats in smart, bar and beat modes.

Grid lines in Numbers

Just started using Numbers. The grid lines on my spreadsheets I've created are barely visible. How do I darken the gridlines? I've tried using Inspector in the tool bar, but have had no luck.
Kevin

in the user guide located on the apple support main website, chapter four has a section called "Formatting table cell borders" which explains all the basics.
Jason

Showing Grid without column headers and Grid lines

Hi all
does anyone knows how can set a grid object to display without grid lines and without column headers?
appreciate the help
Yoav

Hi Yechiel,
When you work with the grid you just have to drag it into your srf and bind it with some table by specifying the table name in its properties.
When the form launches the columns of the grid will be created automatically as per the number of columns in the table.The caption of the column in the grid will be the same as that of the name of the column in the table.The only condition for this is that the table should contain some records, if the table is empty no grid lines and the column header will be displayed .
I hope this meet your requirements.
Below I am sending you the code segments with the help of which you can control the grid progamatically...
//Declaring the grid object
Grid oGrid;
//Initializing the grid object
oGrid=(SAPbouiCOM.Grid)oForm.Items.Item("MBS_Grid").Specific;
//Adding a new data table to the form
oSboApplication.Forms.ActiveForm.DataSources.DataTables.Add("MBS_DataTable");
//Assigning the data table to the grid
oGrid.DataTable = oSboApplication.Forms.ActiveForm.DataSources.DataTables.Item( "MBS_DataTable" );
// This statement will clear the grid
oGrid.DataTable.Rows.Clear();
// In this way you can set the column properties
oGrid.Columns.Item(0).Editable=false;
oGrid.Columns.Item(1).Editable=false;
oGrid.Columns.Item(2).Editable=false;
oGrid.Columns.Item(3).Editable=false;
oGrid.Columns.Item(4).Editable=false;
oGrid.Columns.Item(5).Editable=false;
// In this way you can set the column width
oGrid.Columns.Item( 0 ).Width = 50;
oGrid.Columns.Item( 1 ).Width = 60;
oGrid.Columns.Item( 2 ).Width = 130;
//This is the way you can set a user defined caption on the column header.
query="select U_CTX_MOVCODE as 'Movie Code',U_CTX_MOVNAME as 'Movie Name',U_CTX_SHELF as 'Shelf Number',U_CTX_SPACE as 'Space Number',U_CTX_CARDCODE as 'Customer Code',U_CTX_RENTED as 'Rent Status' from [@CTX_VSTORE] order by Code";
Regards,
Prashant

Access Reports to PDF cause weird grid lines

I have created reports in Access 2010, with no padding and grid lines to be hairline thickness. In Access, when viewing it under report view it looks perfect; however when I export to PDF I always get bold lines in random order and space between the rows.
I have tried to show a picture but it won't allow me.
I appreciate any and all help.
Thanks!

Hi,
Do you have some special formatting or date in the report? For example, if you have conditional formatting rules in the report, it might appear some weird grid lines. See the thread :
http://social.msdn.microsoft.com/Forums/en-US/d61feb68-b662-4250-86de-5033d9f61b5e/is-there-a-way-to-use-alternate-back-color-and-conditional-formatting-at-the-same-time?forum=accessdev
And we may try some methods to check if they are helpful:
Update the PDF Reader version.
Install Office 2010 latest patches.
Disable Access 2010 add-ins.
Repair Access 2010.
If the issue still exists, please upload the image or a sample of the database through One Drive and share the link to me.
Regards,
George Zhao
TechNet Community Support

Why do my Waveform Chart Grid Lines Disappear when this runs?

Hello all
I have a Waveform Chart that Im using. The charts grid lines are initially set at 1 min intervals...which works fine
However, after the 1 set of intervals (red grid lines) are reached, there are no further grid lines seen on my chart.
Can someone tell me how to create a chart with continuous grid lines that scroll?
thanks
J
Attachments:
JH_waveform_graph_markers[1].vi ‏25 KB

Hi hova2010,
Please keep your questions on the same issue to a single thread. Thanks!
Thank you for choosing National Instruments.
Aaron Pena
National Instruments
Applications Engineer
http://www.ni.com/support

How do I hide the axis but show the grid lines in CNiGraph?

I'm trying to create an oscilloscope like view for real time display of multichannel data. Each channel is supposed to be presented in it's own graph. All graphs are vertically stacked in one column.
How can I turn in the gridlines to give me ten divisions while having the axis hidden?
When I hide the axis the gridlines are hidden as well. Furthermore, I cannot seem to get the coordinates for the plot area so that I can draw the grids myself.
The view I'm trying to create will look similar to the NI BioBench acquisition software which can be seen at: http://sine.ni.com/apps/we/nioc.vp?cid=10435〈=US
Thanks,
Johnny Sundblom

Try this:
Bring up the property pages for the graph and go to the Ticks tab.
Check the Major and Minor boxes in the Grid Lines section.
Make sure that all check boxes in the Tick Marks section are unchecked.
Make sure that all check boxes in the Labels section are unchecked.
Make sure that the Axis Caption is cleared.
I think this will do what you want.
- Elton

Outer table frame without grid lines

Howdy,
I have a form that is printing a variable size table that can span more than one page. I am attempting to create an outer frame around the table without grid lines in the middle.
There is a framed pattern, the one in the upper left hand corner of the patterns, that appears to fit my scenario. However, when I use this pattern, the outer frame appears, but there are also grid lines.
Is it possible to create an outerfram around a table without grid lines between the cells?

Hello Ernest,
Goto Table Painter Settings, there you have tabs like Grid, Main Grid and so on...
By default, it would have selected the Display check box in Grid tab. Remove that check and goto Main Grid tab, and check the Display check box.
I guess your problem is solved.
Regards,
Prem

Remove table border and grid lines

all,
i have and adf faces table on my page and I would like to get rid of the table border and grid lines. i tried using the inline style properties of the table and columns in the table (border-style:none;), and the GridVisible = false property of the columns, but the lines still appear.
any suggestions?
paul

Hi,
We can design frames in so many ways so check all those one by one
Check the output options tab in all your window, table & text nodes.there check whether Box & Shading is check or not if it is check remove it.
sometimes for vertical lines we create seperate windows with low width like 0.01 cm & in its output options check 'box and shading' frame & this window postions are as you required & you can adjust the line in the preview option of box & shading in the output options.
& in the table node table tab check the select pattren here patterns are again two types with frame & without frame.
Let me know your exact requirment & your trails if its not working.
Thanks,
Phani.
Edited by: phani kumar on Aug 26, 2008 1:56 PM

Grid lines Elements 11

How do I make the grid larger in Elements 11?

Got it - thanks for the help...
From: Peru Bob
Sent: Saturday, August 17, 2013 11:26 AM
To: Ermineglen
Subject: Grid lines Elements 11
Re: Grid lines Elements 11
created by Peru Bob in Photoshop Elements - View the full discussion

Newbie ? - Creating Grid Lines On JSVGCanvas?

Similar Messages

Maybe you are looking for