Newbie - Crossfade, how to use it.

I'm trying to apply a crossfade but am having a little trouble finding in the manual exactly where this function is. Could someone direct a newbie to the right process?

First in the arrange window mark the 2 regions you want to crossfade. The 2 regions should overlap - of course. The first one has to be active, i.e. selected.
At the left side of the arrange window you see various parameter adjustment options such as tempo/loop/fade in/curve and there it is... "fade". In default position it says fade OUT. Click on OUT and change it to X. Next to it is says "0". Move this number up to activate a crossfade. The higher the number, the longer/smoother? the crossfade.
Hope this helps,
Joern

Similar Messages

How to use labview with gpib to connect with Agilent PNA E8362B ?i am newbie ..just started to work on labview about a fortnite bck and a novice in interfacing skill ..so plzzzzz explain me in a litle detail

how to use labview with gpib to connect with Agilent PNA E8362B ?i am newbie ..just started to work on labview about a fortnite bck and +i am a novice in interfacing(networking... jst know tidbits) skill ..so plzzzzz explain me in a litle detail

Sir
We were able to solve that problem...but now could you advice as to which DC power supply we should use (preferably avalable in India) so that it can be controlled by Labview (through a gpib/rs232/any other port) to give a square wave of desired frequency/other parameters.
Regards
Shivam

How to use Adobe Edge Web Fonts correctly

I am a Dreamweaver newbie and am trying to learn how to use it through the tutorials. I am stuck at part 3 trying to use Adobe Edge Web Fonts correctly in my web site. As far as I can tell I have followed the instructions in the tutorial correctly, but the font style effect does not show up on my site. I am working on a Windows 7 machine and using Dreamweaver 5.5. I have copied and pasted the javascript into the correct spot in the head of the index.html page as well as included the font-family name in the CSS file and saved the whole smash. The source code for my index page looks exactly like the sample in the tutorial, and I have tried to view my site in my browser, but no dice. Doesn't display the Edge Web Font style in the web page. I believe I've done everything according to the directions, but I suppose I've missed some small detail. Any suggestions greatly appreciated

You need to add a <script> to the head of your documents like the example below. In my example, I'm using all of the aguafina-script and league-gothic fonts.

<script src="//use.edgefonts.net/aguafina-script:n4:all;league-gothic:n4:all.js"></script>
CSS:
     h1 {
     font-family: league-gothic, sans-serif;
     font-weight:bold;
     color: #639;
     font-size: 250%;
A simple way to get the correct codes is to go to Adobe Edge Web Fonts and select the font you wish to use.
https://edgewebfonts.adobe.com/fonts
NOTE: You won't see the custom web fonts displayed in Design View, Live View or when previewed locally unless you use a local testing server. An easier way to test is by uploading the page to your remote server.
Hope this helps,
Nancy O.

How to use a session, created in a jsp page, in a php page

Hello, forgive me for the newbie question.
Here is my problem:
I want to have a jsp page create a session, set some session variables and then redirect to a php page which will access those same session variables.
I have the redirection worked out, but I can't seem to find out how to use the jsp session in my php script.
Is this possible at all, and if so, how does it work?

Note that javascript runs on the client side, and JSP runs on the server. JSP and the session objects are NOT available to javascript in reaction to the user.
If this function is called only when the page is first created, not when the user interacts with the page, or if you want that value to be constant with respect to the javascript, then you can do this:
<%
String someValue = (String)session.getAttribute("theAttributeName");
%>
<script type="text/javascript">
     Calendar.setup({inputField:"f_date_dfFirstPmtDate",
                                          button:"f_trigger_dfFirstPmtDate",
                                         singleClick:true,
                                          ifFormat:<%=someVale%>});
</script>

How to use RFBIBL00 as direct input in LSMW

Can any one Please help how to use RFBIBL00 as direct input in LSMW ? How should be structure Same level or subordinate level as I will be having single text file ?
I have around 15 fields with me
BKPF
STYPE     C     1
BLDAT     C     10
BLART     C     2
BUKRS     C     4
BUDAT     C     10
XBLNR     C     10
WAERS     C     3
XPRFG     C     1
XMWST     C     1
BSEG
STYPE     C     1
NEWBS     C     2
DMBTR     C     10
KOSTL     C     10
SGTXT     C     10
PRCTR     C     10
NEWKO     C     10
MWSKZ     C     2
Thanks and Regards
Guru

Hi,
look testabap RFBIBLT0, which creates testfile
A.

How to use WB_IS_DATE

Hello fellow OWB users,
I wanted to ask how to use the predefined functions in OWB, specifically WB_IS_DATE. It is meant to check for a valid date, and return the boolean true, if it finds one. My intended usage was to write the following into an expression:
CASE
WHEN
WB_IS_DATE(INGRP1.FAELLIG_AM,'DD.MM.YYYY')
THEN
TO_DATE( INGRP1.FAELLIG_AM ,'DD.MM.YYYY')
ELSE
NULL
END
Sadly, this does not validate.
Validation returns:
Line 2, Col 58:
PL/SQL: ORA-00920: invalid relational operator
Line 1, Col 1:
PL/SQL: SQL Statement ignored
I think it should work, since the following validates succesfully:
CASE
WHEN
1=1
THEN
TO_DATE( INGRP1.FAELLIG_AM ,'DD.MM.YYYY')
ELSE
NULL
END
and 1=1 is, at least in my humble opinion, returning a boolean value.
[This thread|https://forums.oracle.com/forums/thread.jspa?threadID=307921] deals with this issue, and recommends an user-defined function. However, it is from 2005, and I hope there was some progress on that matter in 8 years.
Just some further Debug info, in case it helps:
CASE
WHEN
WB_IS_DATE(INGRP1.FAELLIG_AM,'DD.MM.YYYY') IS TRUE
THEN
TO_DATE(INGRP1.FAELLIG_AM ,'DD.MM.YYYY')
ELSE
NULL
END
returns:
Line 2, Col 61:
PL/SQL: ORA-00908: missing NULL keyword
Line 1, Col 1:
PL/SQL: SQL Statement ignored
CASE
WHEN
WB_IS_DATE(INGRP1.FAELLIG_AM,'DD.MM.YYYY') = 1
THEN
TO_DATE(INGRP1.FAELLIG_AM ,'DD.MM.YYYY')
ELSE
NULL
END
returns
Line 2, Col 11:
PLS-00382: expression is of wrong type
Thank you for your help,
Marc, the OWB newbie
Edited by: 1000661 on 17.04.2013 07:23
Formatted Code

Hi Community,
quickly before i leave the office for today:
an experienced user proposed a workaround with the WB_TO_DATE function, that i previously overlooked. It validates and can be queried with IS NULL.
He mentioned, that the expression might be in a SQL-only part of the OWB-code. But wouldn't this mean one should be able to use if instead of Case?
Hoping for some clarification,
Marc

How to use the FormDownload UI element?

Hi,
I am a newbie in ABAP Webdynpro and I want to know how to use the FormDownload UI Element. Any hints plz? Thanks in advance.

Hi,
I used CONVERT_OTF FM to convert the otf data to pdf data. In my form user has the option to view the smartform (a button) or to directly download the pdf from smartform output without displaying the output. While the former has been taken care of by using InteractiveForm UI element and is displaying the smartform output fine, I am not being able to implement the second option. I have given a supply function to the pdfsource context node but am clueless about what to write to pass pdf data. In the sam WD component WDR_TEST_EVENTS, the FileDownload is used to save a text file with just one line. But how can I save a pdf file? I have assigned mime to application/pdf. How will I proceed now? Please suggest. Thanks in advance.

Install Sun ONE Directory Server 5,2 & how to use it for authenticate user

Good afternoon, Excuse, are newbie in the scope I am learning and putting desire to him, this in my situation I am trying to install Sun ONE Directory Server 5,2 since I understand that this it is application LDAP for Solaris, ok I want to install it to authenticate user against the system, that is to say, to be able to acces the server entering with a created user from the data base of LDAP and make think user that his created in the system. But the documentation that I finds indicates the installation of Sun ONE Directory Server 5,2 but it not clearly about how to use it for authentication. Some one have any manual step by step of Sun ONE Directory Server 5,2 installation and how to make it for authentication systems users.
I read the forum seeking for anwser and i get confuse
Thanks for the help and sorry for any inconvenient
Message was edited by:
Aku_28
Message was edited by:
Aku_28

I think that I found the Sun endorsed book locations for using LDAP accounts that don't use authentication besides "crypt". I now can use an account with a "ssha" password. It can be more than 8 characters long.
Chapter 14 System Administration Guide: Naming and Directory Services
Read page 201 which is the pam.conf file pam_ldap setups. I edited my "/etc/pam.conf" file to reflect this
Chapter 7 Directory Server 5.2 2005Q4 - Administration Guide
Read page 316-318 which has a graphical technique to specify password syntax. I set it up and then tried the password by running "su - brahms". It now requires a longer password than 8 characters and it is set up to use "ssha" for that UID entry "brahms".

How to use labview with gpib to connect with Agilent PNA E8362B ?

how to use labview with gpib to connect with Agilent PNA E8362B ?i am newbie ..just started to work on labview about a fortnite bck and +i am a novice in interfacing(networking... jst know tidbits) skill ..so plzzzzz explain me in a litle detail

Duplicate Post.

How to use multiple videos in template

I'm using the Directions HD template in Motion 3 and trying to figure out how to use more than one drop zone. When I drop a video into the first drop zone, it appears in all drop zones. How can I use multiple videos?

Step 1: Find the Drop Zone layer (inside the Video group/folder) and select the Custom behavior and type Command - K (Convert to Keyframes from the Object menu)
Step 2: Duplicate the Drop Zone the number of times you want to be able to change media.
Step 3: For Each drop zone, move the playhead to the position you need to set an In Point; then do the Out Points... I recommend overlapping the Outs and Ins and crossfading using opacity keyframes. [For some of these, this will mean a 1 or 2 frame crossfade... or pick your points for straight cuts. ]
Step 4: Select all the Drop Zones and create a group (Command-Shift-G).
Step 5: Select the "Clone Layer" (it will be unchecked in the Layers List inside the Video group), and drag the newly created group of drop zones into the Source well.
You can mix up the way the background (emitted copy) video plays by clicking the Random Seed button at the buttom of the Emitter > Particle Cell inspector.
HTH

[HTML DB] How to use the existing database table?

[HTML DB] How to use the existing database table?
I installed Oracle 10g database in Computer A(Windows 2000), and I already create all the tables with data and the data size is about 300MB.
In Computer B(Windows 2000), I installed HTML DB 1.6.
How can I use /get the existing database table (in computer A) for HTML DB?
Could anyone help me on this? I am newbie and I need some detail instructions. or Where can I find the examples.....
Thanks

Well I guess if you wish to retain that architecture, i.e. HTMLDB on one machine and your data on another, you will have to establish database links to access the data. Oracle documentation will describe how to achieve that.

How to use an own plugin to add 3d-content

Hi,
I have started to develop a plugin for Acrobat 8.0 that will add some kind of 3d-content to an existing model. I tried somewhat, but I face the problem that I can't find out how to use the plugin in Acrobat with Javascript. I added the .api file in the folder Acrobat/Plugins and the plugin is loaded.
But I can't find out how to use the methods of the plugin. I always get the error: 'can't found [methodname]'. Do you need to use some kind of prefix, or whatever. Perhaps this is a newbie question, but I can't find out it in the documentation.
Any help will be fine!
Regards,
Ewout

> I face the problem that I can't find out how to use the plugin in Acrobat with Javascript.
That's right. You can't.
>
>But I can't find out how to use the methods of the plugin.
You cannot use the methods of a plug-in. They are for its own internal
use.
A plug-in registers for call backs. Most obviously menu selections,
but also selecting a tool, clicking on a button, opening a document,
changing page etc. Also it can register an "idle" procedure to be run
when Acrobat is not busy, at intervals. Your plug-in code is run, by
Acrobat, at these moments.
Aandi Inston

How to Use LABVIEW charts with Mathscript

Hi,
   I recently tried to work on Mathscript and it is really amazing. what I tried to figure out is:
    Instead of plotting using traditional "plot" statement, how to use LabVIEW chart ( I know how to Add output but the graph were not as expected
Is there any mean to get rid of this "Lengthy" delay that "ALL MATLAB User know" for first time compilation?
Thanks in advance
Waleed El-Badry MSc.,MCPD, ISTQB Certified Tester
Assistant Lecturer
Mechatronics Department
Faculty of Engineering
Misr University for Science & Technology

Well Chris,
         I was about to post the solution, but as I said, I'm in a middle of experts
It took me 3 hours to figure it out. I should've checked your answer . I resolved to the same suggesstion of yours. I only added some functionality to get the newbies like me being acquainting with how easy to work with LABVIEW mathscript based on MATLAB knowledge.
Waleed El-Badry MSc.,MCPD, ISTQB Certified Tester
Assistant Lecturer
Mechatronics Department
Faculty of Engineering
Misr University for Science & Technology
Attachments:
Play with Mathscript.vi ‏35 KB

How to use struts

hi, i m newbie..
how can i use struts in my jsp page.
i have Jakarta Tomcat4.1.24 ,

i configured the struts in following way
Tomcat_home/webapps/root/Registeruser
in ---registeruser
---web-inf
----classes
----lib
strut.jar and servlet.jar
-----src
-----index.jsp
and in web-inf i put some of the tld files
i m getting this error
org.apache.jasper.JasperException: File "/WEB-INF/struts-bean.tld" not found
so what is the suggestion
?

How to use the set full screen mode ?

hai...i' a newbie ..i hav one question ...how to use the set full screen mode for my application..
i found.
public void setfullscreenmode (boolean mode)
but when try in my application it error and other
canvas.setfullscreenmode(true);
actually i don't know where i should put this code

i also found the coding it use like
setFullScreenMode (true);
but when i apply it ..it error because cannot resolve the symbol.
my question is which one i should use; declare the
public void setFullScreenMode (boolean mode);
first or use
setFullScreenMode (true) ;
or other way ..what i need to do to use setFullScreenMode

Newbie - Crossfade, how to use it.

Similar Messages

Maybe you are looking for