Newbie: does ADF install/run with Eclipse instead of JDeveloper?

Hi,
Can ADF install/run with Eclipse instead of JDeveloper?
Thx
-Rob

If you mean can you design ADF applications with Eclipse then yes, you can do that with Oracle Enterprise Pack for Eclipse. It isn't as full-featured as the JDeveloper experience, though.
More info: http://www.oracle.com/technetwork/developer-tools/eclipse/overview/index.html
Tutorial: http://www.oracle.com/webfolder/technetwork/eclipse/adf/gettingStarted/Tutorial/ADFwithOEPE_1.html
If you meant something else, please be more specific!
- Joonas

Similar Messages

Eclipse instead of JDeveloper

Hi,
For developing portals in Webcenter can i use Eclipse instead of JDeveloper?
Is there any plugins needed for Eclipse to use Webcenter?
Regards,
Venu--

Hi,
WebCenter is dependent on ADF and there is no Eclipse plugin for this. However, best to ask on the WebCenter forum
WebCenter Portal
Frank

Z77A GD-65: Windows 7 not installing/running with Intel SATA controller.

I've been having some weird issues with the Intel SATA controllers on-board. They won't let me install Windows at all. I'm using a Crucial m4 with the 0309 firmware.
When I was trying to install Windows with the SSD connected to the Intel SATA controller, installation would always fail sometime around the "Completing Installation" segment. I tried ACHI mode, IDE mode, nothing worked.
So I decided to try hooking up my SSD to the ASMedia controller instead, despite that being advised against. Windows was able to install and run fine on that connection. After that, I installed all of Intel's chipset drivers and all the updates available for Windows, hoping it would resolve the problem.
Then, I connected the SSD to the Intel port again. Now I get a BSOD every time I try to start windows, even though it has drivers for the chipset available.
I'm really upset by this... it seems like I'm going to have to settle for inferior SATA 6 performance just so I can run Windows. :(

Quote from: Warner on 24-May-12, 03:58:56
You can't install OS with ASMEDIA port, and then switch to Intel port.
So basically, if I can't get it to install on the Intel port, I'm stuck using the other one... well, the performance isn't optimal, but I guess it's acceptable as a failsafe. Better than nothing.
Quote
Try doing a new installation based on the Intel port, load Intel driver on HDD screen, and proceed.
What Intel driver do I need, and how do I load it during Windows installation?

Looking for WebLogic 10.3.5 install media with Eclipse for 64-bit

Hi,
I need to install OSB on 64-bit for 11.1.1.5 suite.
I have downloaded ofm_osb_generic_11.1.1.5.0_disk1_1of1.zip
The instllation process asks for Eclipse location which should be installed with the WebLogic.
The file I used to install the web logic was wls1035_generic.jar, but it doesn't have Eclipse.
I was able to find WebLogic 10.3.5 with Eclipse (wls1035_oepe111172_win32.exe) but it is for 32-bit, I need 64 bit.
Any idea?
Thank you

Hi Vlad,
Thanks much for the ersponse.
What I did I downloaded the 11.1.1.5 version that I need
oepe-galileo-all-in-one-11.1.1.5.0.201003170852-win32-x86_64.zip
I did unzip it, BUT! I what I am seeing in the unzipped content is not the 'regular' install distribution, I mean there is no INSTALL or SETUP utilities, there is an executable called eclipse.exe which when sarted gives me the eclipse I beleive. This is fine per say, my concern is that later when I go and try to install OSB that will be looking for eclipse installation, and if eclipse was not 'installed' but just 'unzipped' it won't see it. May I am making things a little more complex than they need to be, I am just a little confused. I am not sure if this is the right way that'a all, my goal was OSB this is what brought me to eclipse.
Thank you,
Anatoliy

I already have AVG installed running with IE, how do I now install/run with Firefox ?

I have AVG installed and running under Internet Explorer, how do i install it or get it to run with Firefox and show the AVG tool bar

The AVG Toolbar has known issues with Firefox, as far as I can see. You should ask for help in the AVG forums:
http://forums.avg.com/ww-en/avg-free-forum

Does snow leapard run with tiger 10.4.11

Please anyone?

Your question does not make sense. One version of OS X does not "run" with another version.
Tiger is OS X 10.4.x
Snow Leopard is OS X 10.6.x
The names Tiger and Snow Leopard refer explicitly to the OSs (Operating Systems), meaning the software. Those names do not refer to any hardware, such as a computer.
What model computer do you have (as specific as you can)?

Newbie Questions About Installing Windows with Boot Camp

The only reason I want to use Windows is to be able to download games from the internet that are not made for Mac only for PC and I have a few questions:
1. Doing all this installation will anything made for PC work?
2. I only have Windows XP will that work? And then do all the SP updates after it's installed?
3. If I have to use Windows XP SP2 is this one a good one to buy?
http://www.cdsfu.com/index.php?categoryID=87
4. After everything is installed do I have to use an anti-virus?
I want to thank you for your help as you can see I really am a newbie.
Karen

Hi Karen and welcome to Discussions,
The only reason I want to use Windows is to be able to download games from the internet that are not made for Mac only for PC and I have a few questions:
1. Doing all this installation will anything made for PC work?
Nearly anything. There are some Windows programs using hardware dongles that don't run.
2. I only have Windows XP will that work? And then do all the SP updates after it's installed?
You need a Windows XP CD with at least Service Pack 2 (SP2) incorporated.
3. If I have to use Windows XP SP2 is this one a good one to buy?
http://www.cdsfu.com/index.php?categoryID=87
another user round here had already asked about that website.
Three things about this offer are, at least to me, very suspicious:
"Microsoft Windows XP Professional Edition With SP2, Full Version on CDR"
Microsoft never has used CD-R disc (CD-Recordable) for Windows
"software that does NOT include any COA label or a sticker from the manufacturer"
There always has to be a sticker, that one puts on the computer on which the Windows license is installed and a COA label as well.
"VOLUME LICENSE INCLUDED"
A volume license, from my understanding, was only sold to companys, who install Windows on a larger scale (hundreds of computers) and for that purpose are given only one license-key for all installations.
Usually this is known as a'corporate license'.
All in all, I would personally stay away from this offer. It simply doesn't sound legal to me.
4. After everything is installed do I have to use an anti-virus?
When running Windows a decent Anti-Virus software is a must.
I want to thank you for your help as you can see I really am a newbie.
You're welcome anytime. Hope it helps.
Karen
Regards
Stefan

Working fine when running with eclipse, when exported, it doesnt.

I have made a little mp3 player with the help of Jlayer 1.0 library. Now, it is running perfectly when I run it from eclipse. But when I export it to a .jar file, strange thing happens.
The program starts ok, then I click add song button, a popup pops and wants me to choose a file, well I click the choose
the file button, it opens a JfileChooser, choose file, everything ok so far. Now, I want to click ok so that the song would be added to the program, but nothing happens when I click ok. when running eclipse it would add the song to the Jtree and so on, now it does absolutely nothing, the box wont disappear, no error message, nothing. I wanted to check if it was somekind of bug in the button, but it would seem it does do some basic statements on the beginning, but when it would have to create
new datastructure, it never comes back. I tested this with printing text when the program completed a statement and got the statement which makes the program idle. And the program doesnt freeze, it just wont do anything, and it wont even finish the method it is supposed when ok is clicked.
Any suggestions? Im totally clueless.

Yes, you probably don't have the application correctly set up to run outside of Eclipse. How to do that is different for each IDE. I am aware of the following tutorial for NetBeans, and (probably) Eclipse has something like that. You need to ask at the Eclipse website for that, since these forums are for the Java language, not Eclipse support.
http://www.netbeans.org/kb/articles/javase-deploy.html

Installing java3D with eclipse

Hi, am new to java and am using eclipse. Have downloaded all the files required and have built a path using them, ie. j3dcore.jar, j3dutils.jar and vecmath.jar.
Problem is, i still cant run any example programs.
things like;
import com.sun.j3d.utils.universe.SimpleUniverse;
import com.sun.j3d.utils.geometry.ColorCube;
import javax.media.j3d.BranchGroup;
import com.sun.j3d.utils.applet.MainFrame;
are flagged, and all it says are things like
Access restriction: The type MainFrame is not accessible due to restriction on required library C:\Program Files\Java\jre6\lib\ext\j3dutils.jar
please help.
Thank youuu

I think you also need the jogl and gluegen-rt files as well. This is how I set up my system; I install my libraries in a separate place in my home directory (under ~/dev specifically), I never bother with "jre/lib/ext":
jsemler@jsemler-desktop:~/dev$ ls -R java3d jogl-1.1.1-rc8-linux-i586
java3d:
lib
java3d/lib:
ext i386
java3d/lib/ext:
j3dcore.jar j3dutils.jar vecmath.jar
java3d/lib/i386:
libj3dcore-ogl-cg.so libj3dcore-ogl.so
jogl-1.1.1-rc8-linux-i586:
CHANGELOG.txt COPYRIGHT.txt lib LICENSE-JOGL-1.1.1-rc8.txt README.txt Userguide.html
jogl-1.1.1-rc8-linux-i586/lib:
gluegen-rt.jar jogl.jar libgluegen-rt.so libjogl_awt.so libjogl_cg.so libjogl.so
jsemler@jsemler-desktop:~/dev$ In eclipse, under "<project name>...Properties...Java Build Path...Libraries" I add the following Jar files:
/home/jsemler/dev/java3d/lib/ext/j3dcore.jar
/home/jsemler/dev/java3d/lib/ext/j3dutils.jar
/home/jsemler/dev/java3d/lib/ext/vecmath.jar
/home/jsemler/dev/jogl-1.1.1-rc8-linux-i586/lib/gluegen-rt.jar
/home/jsemler/dev/jogl-1.1.1-rc8-linux-i586/lib/jogl.jarI set the native library path for j3dcore to: "/home/jsemler/dev/java3d/lib/i386".
I set the native library path for gluegen-rt.jar and jogl.jar to: "/home/jsemler/dev/jogl-1.1.1-rc8-linux-i586/lib"
You can pick up the jogl and gluegen-rt jar files from here:
http://download.java.net/media/jogl/builds/archive/
I can't personally vouch for any of the other versions. IIRC, I'm using version 1.1.1-rc8 for compatibility reasons involving NASA World Wind SDK.

Problems in instalation/running with JDK 5.0

I'm rellatively new to Java programming. I've had a few classes, know the basic concepts and have tried some tutorials. Recently I installed JDK 5.0 update 6 in my computer (first I tried the Netbeans bundle, but saw it was very complicated and unnecesary) then found the installation for only the JDK and JRE.
The compilation goes without complication, but when I want to run the program come the obstacles
I've tried to start with some simple programs but whatever I do, I get the Exception in thread "main" java.lang.NoClassDefFoundError in every program that I've done. I even tried the simplest HelloWorld program (found in http://java.sun.com/docs/books/tutorial/getStarted/cupojava/win32.html ) and get the same error
Now for the important part. I've already did my research, tried to debug everything. First off, added to my PATH env variable the path to the jdk5.0/bin dir to run javac and java in every directory. And also tried running "java HelloWorldApp classpath="dir to .class" and no success.
I checked the env variable for CLASSPATH and only found a path to a Quicktime dir and nothing else (yes, I have Quicktime Pro installed). I've tried adding the dir of the .class file to it with no success
I don't know what else to do. If someone has suggestions as to what else there is to do, please do not hessitate to even give the simplest and dumbest of advise

I agree with the previous poster that it's better not to rely on the CLASSPATH environment variable.
If you go to this link:
http://java.sun.com/j2se/1.5.0/docs/tooldocs/index.html#basic
you can find the documentation for javac and java, which may interest you in itself. The one for javac explains the essence of how classes are found.
Now, assuming you are on Windows,
http://java.sun.com/j2se/1.5.0/docs/tooldocs/windows/java.html
documents how to run java. You need to pass as -cp all relevant class paths.
I know this is not helping you directly, but it's hard if not impossible to deduce the problem from what you wrote (at least to me). But if you try this and you still get the same error, please post the full and exact command line you tried.

After upgrading to 10.9 Server 3 XMPP server does not accept account with domain instead of FQDN

Hi,
I've had this issue before when upgrading to 10.8 from 10.7. The issue is that my previous working jabber ID ([email protected]) stops working and I can only login to the XMPP server using [email protected] In previuos upgrades, all I had to do to fix the issue was to re-add the domain witrh the serveradmin tool, adding it to the jabber:hostsCommaDelimitedString.
#serveradmin settings jabber:hostsCommaDelimitedString="host.domain.com,domain.com"
In 10.9 this does not work. Both host and domain entries are already in the config but I still can only login when changing my JID to be [email protected]
Any hints?
Regard,
//Staffan

Solved it myself! It seems like the #serveradmin script for modifying / adding the domain aliases to the ejabberd server does not work correctly. After looking through the different sm_.xml files created when adding a domain the script does not modify the <local><id> that the server uses to identify the JID with.
After manually modifying that id to match my domain, and restarting the ejabberd server, it works fine again!
It seems like when adding or modifying the jabber:hostsCommaDelimitedString="" the server default hostname is always inserted into the <local><id>.
//Staffan

Flash Player 9 does not install / run on Mac OSX

Hi:
I had Flash Player 9 working fine on my Mac, G5 running OSX
10.4.10. Flash 9 worked in both Safari and Firefox.
I visited a website that incorrectly told me I needed to
update flash:
http://www.thehdweb.com/
I followed the link to the correct part of the Adobe site,
downloaded the Flash 9 installer and ran the installer.
All Flash has stopped working.
I am stuck.
I need ideas. I have looked for how to uninstall flash and
cannot figure that out yet..
Steve
stephen (at) ackroyd (dot) com

Did you find a solution to this problem? I'm running into the
exact same issue. Also tried to uninstall (using the Adobe
uninstall utility) and re-install; keep getting the "succesfully
installed" message, but still not working.

Problems installing plugin with Eclipse Classic

Here is the complete error log. One thing I notice, when it
talks about:
file:\C:\Program Files\Adobe\Flex Builder 3
Plug-in\com.adobe.flexbuilder.update.site/
i do not see any folder in Flex Builder 3 Plug-in called
"com.adobe.flexbuilder.update.site"
!SESSION 2007-09-04 11:13:05.375
eclipse.buildId=I20070625-1500
java.version=1.5.0_11
java.vendor=Sun Microsystems Inc.
BootLoader constants: OS=win32, ARCH=x86, WS=gtk, NL=en_US
Framework arguments: -application
org.eclipse.update.core.standaloneUpdate -command install -from
file:\C:\Program Files\Adobe\Flex Builder 3
Plug-in\com.adobe.flexbuilder.update.site/ -featureId
com.adobe.flexbuilder.feature.core -version 3.0.172437
Command-line arguments: -application
org.eclipse.update.core.standaloneUpdate -command install -from
file:\C:\Program Files\Adobe\Flex Builder 3
Plug-in\com.adobe.flexbuilder.update.site/ -featureId
com.adobe.flexbuilder.feature.core -version 3.0.172437
!ENTRY org.eclipse.update.configurator 2007-09-04
11:13:07.140
!MESSAGE Could not install bundle
plugins/org.eclipse.equinox.launcher_1.0.0.v20070606.jar Bundle
"org.eclipse.equinox.launcher" version "1.0.0.v20070606" has
already been installed from:
update@plugins/org.eclipse.equinox.launcher.jar
!ENTRY org.eclipse.update.core 4 0 2007-09-04 11:13:11.468
!MESSAGE Featurecom.adobe.flexbuilder.feature.core
3.0.172437cannot be found onfile:/C:/Program Files/Adobe/Flex
Builder 3 Plug-in/com.adobe.flexbuilder.update.site/
or a newer version is already installed.

Hi clam61
Please log this bug in the public Flex bugbase at
http://bugs.adobe.com/flex/
Thank you!
-Tanya

Will 29.0.1 install & run with WinXP PRO SP3 32bit, need to know soonest?

Version 29 says it is up to date on my system, makes no mention of 29.0.1, how do I get latest version if version I have will NOT download it. My computer is Asus A8n SLI Deluxe with AMD 32/64 bit 4000+. Please help?

The minimum for Windows is still WinXP SP2 so yes it works on WinXP SP3.
http://www.mozilla.org/en-US/firefox/29.0.1/system-requirements/

ADF Libs with Eclipse Hibernate/Spring Configuration

Hi
I have been using Spring and Hibernate in our projects.
Now we plan to use ADF in the same project.
I would like to know whether the JDeveloper 11g R2 with ADF Libs conflict with Eclipse Spring/Hibernate Configuration.
Thanks in advance..
Regards,
Bala

here is one how to use spring, and for Hibernate, since JPA support is there shouldn't be a problem
http://technology.amis.nl/blog/765/spring-and-oracle-adf-registering-a-pojo-spring-jdbc-based-business-service-as-data-control.
As far as eclipse is concerned, oracle has its only flavor of eclipse but i doubt it has the full features of ADF
http://www.oracle.com/technetwork/developer-tools/eclipse/downloads/index.html
Edited by: in the line of fire on Jul 26, 2011 12:11 PM

Newbie: does ADF install/run with Eclipse instead of JDeveloper?

Similar Messages

Maybe you are looking for