NEWBIE - DVDSP not recognizing PSD layers
Hello,
DVDSP 4
I have a DVD project with a single menu and six tracks.
I have a layered Photoshop file from Photoshop CS2. When I bring it into my menu in DVDSP, it doesn't recognize the layers and composites it into a flat file. I don't see those layers showing up in the Inspector for me to turn on/off.
I'm trying it by dragging and dropping and selecting "Set Background" and I'm also doing it through the pop-up in the Inspector.
Thank you for any help!
Hi there,
I think I have some information to back this event happening. I SUPPOSE this is a bug within DVD Studio, please let me explain how I can recreate this behaviour:
1. Create a new file on the PC with Photoshop CS1.
2. Transfer this file to the Mac.
-> Opening this file in DVD Studio Pro 2 will crash the app. Opening this file in DVD Studio Pro 4 shows the image BUT discards all layer information. The Asset information window shows that the type of this file is a QuickTime Picture. I suppose that DVD Studio for whatever reason relies on this file being interpreted by QuickTime which flattens the image, resulting in the loss of layers.
But wait, there is more!
I tried converting this file to something that works by loading it up in Photoshop CS2 on the Mac, saving it as a clone. This clone does not work either. DVD Studio Pro 2 crashes, version 4 shows it as a Quicktime Picture with flattened layers.
What I did next was trying to convert it with the GraphicsConverter tool which comes bundled with MacOS 10.4.4 - but that does not work either.
But now for the interesting part: Creating a new file in Photoshop CS2 on the Mac works flawlessly. If you find this strange, read on. I opened the non-working document in Photoshop 7.0 at work, and tried importing this to DVD Studio (2 & 4). This works flawlessly.
-> I assume that there is someting "odd" with the file structure of the Photoshop document when creating on the PC in version CS1. Photoshop CS2 (and I believe CS1 will do this, too) on the Mac itself has no problems with that file, but DVD Studio. I furthermore guess that by opening this file in version 7.0 of Photoshop forces some structure of the file being rewritten, which makes it compatible again.
I have proof, can recreate this problem and I´d be glad to share the files with someone from quality control to have this bug in DVD Studio Pro fixed...
Regards
Chris
Similar Messages
-
Photoshop not recognizing PSD files
My PSD files are not being recognized. When I go to Properties and then Open With, and browse to the Photoshop application as usual, I am unable to select Photoshop as the program to open my file. I am completely baffled.
It looks like the Open With function is not recognizing PhotoShop, and I do not know if this is a Photoshop error or a Windows error.
Other Adobe programs are working and are recognized just fine. I am using Windows 7 and Photoshop CS4. I am running up-to-date Norton 360 so it is extremnely unliklely to be a virus.
Help please!Sounds like a basic system problem, not a problem with Photoshop per se...
First, Photoshop should have installed itself so that it would automatically be in the list of programs available to open that file type.
Second, if it's not there by default, browsing to the Photoshop.exe file should make it work as you expect.
I've just opened a file from my desktop using Right Click, then Open With, and choosing Photoshop.exe as you have described. However, in my case Photoshop is already in the list of Recommended Programs.
Out of curiosity, do you see it in the list of "Other Programs" toward the bottom of the Open With dialog? You'll have to click on the little arrow to the right to see them.
-Noel -
Photoshop not recognizing PSD files in my windows account but works on others
I tried browsing my computer for the default program to open .psd files, but when I double click photoshop cs6, it doesn't show up in the list of default programs. Please help, this is very annoying. Photoshop can open .psd files automatically in other user accounts, but not on mine.
Boilerplate-text:
Are Photoshop and OS fully updated and have you performed the usual trouble-shooting routines (trashing prefs by keeping command-alt-shift/ctrl-alt-shift pressed while starting Photoshop after making sure all customized presets like Actions, Patterns, Brushes etc. have been saved and making a note of the Preferences you’ve changed, 3rd party plug-ins deactivation, system maintenance, cleaning caches, font validation, etc.)? -
FCP not recognizing PDS layers
I'm trying to import layered PSD files into FCPX 10.1.4. FCP thinks it is a flat image. I don't see the layer icon in the top left corner. But it does show the .psd extension.
I'm using PS CS5. The PSD is RGB, 8 bit. Image size 1920x1080 (same as my video). There are 5 layers, two text, vector gray bars saved as smart objects, no layer effects. (yes) The file is saved with with "Layers" checked.
I tried deleting FCP prefs. I tried other PSDs.
Any idea why I can't get layers?
ThanksKramnos wrote:
I'm trying to import layered PSD files into FCPX 10.1.4. FCP thinks it is a flat image. I don't see the layer icon in the top left corner. But it does show the .psd extension.
I'm using PS CS5. The PSD is RGB, 8 bit. Image size 1920x1080 (same as my video). There are 5 layers, two text, vector gray bars saved as smart objects, no layer effects. (yes) The file is saved with with "Layers" checked.
I tried deleting FCP prefs. I tried other PSDs.
Any idea why I can't get layers?
Thanks
I believe your problem is with the vector layers. You may have to rasterize them. -
Image processor [in Script menu] not recognizing PSD files?
I've been using PS since CS. I still keep a copy of CS2 on a computer simply for the Script -> Image Processor. Since CS5, the processor no longer recognizes many files. These same files will batch process with no problem in CS2. Anybody figure out why the processor has recognition issues? Thanks for any help.
File names are visible using the "select folder" button, directing the script to locate the files to be batched. When selecting the folder, you will see the files within the folder in the adjacent tab [windows or mac]. CS5 put a limit of 8 [if I remember correctly] characters on the processing script. Additionally, some symbols which are permissible in other file naming protocols, no longer worked.
The experience is wide spread among heavy users of this batch tool. I have seen many "google" searches on the subject...which is how I identified the naming issue in CS5. The issue exists with JPG and PSD files; Adobe RGG and, sRGB; each processed from RAW or other JPG/PSD files. I simply cannot determine why one set of files work, and another will not, yet all will work on older versions of PS.
Once again, these same files causing issue, will process without issue on a CS2 version I keep for just such occurrences. I've been using the batch image processor since CS to apply actions to folders of files. -
CS4 not exporting PSD layers.
So what's the secret to exporting layers to Photoshop?
My Illustrator document has layers
My settings seem correct... (I get the same results with Maximum Editability on or off)
But it comes over as one layer...???I've been using Illustrator since '88 and I just get super annoyed when people repond to forum problems like I just started using it last week. I'll post the file and you can look at it.
There are Illustrator team members that have been with Illustrator as long as you have been using it and they sometimes contribute ad they sometimes overlook things that are very basic, all of do so the questions are necessary in case someone had a moment where the wheels got clogged.
Everyone here is trying to help. The amount of experience someone has is meaningless if they help one solve the problem.
You might want to restack the layers in AI just for the purpose of exporting and whether that works or not would be easy enough to find out. -
DVDSP not recognizing Chapter Markers from FCP?
We added Chapter Markers in FCP6. We exported one time with DVD Studio Pro Marker and tried the other time with Chapter Markers. We took it into Compressor and made the file into MPG-2 and imported into DVD Studio Pro, though it does not seem to recognize the chapter markers once in DVD Studio Pro.
Does anyone have any advice on what I might be doing wrong?
Thanks!Or, just try selecting your sequence in FCP's browser, then go to the file menu and export using Compressor. Choose your setting, your destination, and hit submit. Saves steps, and it will export your complete sequence including chapter markers.
-
After a 10.0.3 my PSD images are not recognized ?
I installed the update 10.0.3 because I really need the new incrustation fonction in my project.
But I used a lot of PSD images in it , who were perfectly recognized in the 10.0.2.
But after the upgrade all my files PSD were not recognized and a big part of my work is crashed :-(
Is it normal ?
May be I have something to do ?
But I don't find answers on apple web site....
Please help...
Thanksyes and no. I tried more than one files. Usually there is no problem, you are right. But if you try pictures with parts that are white or very light you cansee the problem. There are black borders around white parts and if you have a white flow it turns grey.
Maybe I can describe the problem by showing the results. The first was was made with 10.0.2. look at a white sceen in the middle at 17seconds - 18seconds:
http://www.youtube.com/watch?v=bRYPqe4vlqk
now: the same thing done with 10.0.3. now you can see she shades in the white parts of the picture.
http://www.youtube.com/watch?v=53plztoiOMY
0:17 seconds to 0:18 seconds -
NewBie Question: Javac.exe Not recognized?
Hi I just want to try out my v first hello world program in MOTOROLA IDEN SDK For J2ME Tech (v 1.2)
I added a hello-world java file in the javafiles folder. Then when i try to build, an error occurred:
"start building...
compile D:\IAProject\TRIALCODEEXAMPLE\Example.java...
javac.exe is not recognized as an internal or external command,
operable program or batch file.
Building over"
Wat's the problem? Did i missed out any settings? THanks!!!!!THX, but I have new problem with this:
Unhandled Exception in constructor java.lang.ClassNotFoundException: HelloWorld
Error creating MIDlet HelloWorld
sorce from UserGuide Motorola iDEN SDK..
package com.mot.j2me.midlets.helloworld;
import javax.microedition.lcdui.*;
import javax.microedition.midlet.*;
public class HelloWorld extends MIDlet {
private Form mainScreen;
private Display myDisplay;
HelloWorld() {
myDisplay = Display.getDisplay(this);
mainScreen = new Form("Hello World");
StringItem strItem = new StringItem("Hello", "This is a J2ME MIDlet."); mainScreen.append(strItem);
public void startApp() throws MIDletStateChangeException
{ myDisplay.setCurrent(mainScreen);
public void pauseApp() {
public void destroyApp(boolean unconditional) {
}Why this code doesn't work?? -
Is it possible to export a DVDSP menu as .PSD Photoshop file?
I promise this will be the last question for tonight. Is it possible to export a DVDSP menu as .PSD Photoshop file with its layers intact? I'd like to examine the structure to see if there's an easy way to re-create all my EncoreDVD menus as DVDSP menus.
Peace, BJWithout opening DVDSP, I can't say for sure, but is there an option to export the menu as Movie to Image Sequence? Is there an option to export the menu at all? Sorry for asking a question to answer a question, but I don't have my scratch disk with me and don't want to open DVDSP without having my current project with me. However, the image sequence wouldn't give you layers. Simply put, I don't think so. Apple's apps have played well when it comes to importing .psd files, but as far as creating them, not so well. As far as recreating Encore Menus, is there an XML type file that's compatible with both Encore and DVDSP where you could just reconnect your media assets in DVDSP and then import this XML file?
Good luck either way and report back with what you find,
-Brian -
CD drive not recognized & Very slow boot process.
(I posted this in the newbie forum, but got no answer, so I give it another go)
Hi all,
After a few years alternating between gentoo and debian, feeling they were ok, but not exactly what I wanted, I found Arch, and now I am happy. It feels just right. I am still very new, but I am already quite sure I'll settle here.
But happyness and warm feelings asides, I have a 2 problems I'd like to get some help about.
problem 1: my CD drive is not recognized. my hard drive and its partitions show up correctly, but I don't get a cd drive.
problem 2: On the boot process, a lot of time (2 minutes or so) is spend scanning the ATA bus. relevant messages are as follow (plus a few lines before and after just to give context)
Code:
Freeing unused kernel memory: 256k freed
Time: acpi_pm clocksource has been installed.
ACPI: Unable to derive IRQ for device 0000:00:10.0
ACPI: PCI Interrupt 0000:00:10.0[A]: no GSI
ata1: PATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x2000 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x2008 irq 15
scsi0 : pata_ali
ata1.00: ATA-5, max UDMA/100, 78140160 sectors: LBA
ata1.00: ata1: dev 0 multi count 16
ata1.00: configured for UDMA/100
scsi1 : pata_ali
ata2.00: ATAPI, max UDMA/33
ata2.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA IC25N040ATCS04-0 CA4O PQ: 0 ANSI: 5
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2: port is slow to respond, please be patient (Status 0xd0)
ata2: soft resetting port
ata2.00: model number mismatch 'QSI CD-RW/DVD-ROM SBW-241' != ''
ata2.00: disabled
ata2: soft resetting port
ata2.00: ATAPI, max UDMA/33
ata2.00: configured for UDMA/33
ata2: EH complete
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2: port is slow to respond, please be patient (Status 0xd0)
ata2: soft resetting port
ata2.00: configured for UDMA/33
ata2: EH complete
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2: port is slow to respond, please be patient (Status 0xd0)
ata2: soft resetting port
ata2.00: configured for UDMA/33
ata2: EH complete
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2: port is slow to respond, please be patient (Status 0xd0)
ata2: soft resetting port
ata2.00: configured for UDMA/33
ata2: EH complete
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
problem 2 and 3 are probably related, and linked to the new pata system in the kernel, but I don't really know anything about it, and my understanding of the mkinitcpio is very very limited. here is mine anyway, comments stripped.
Code:
MODULES="pata_ali"
BINARIES=""
FILES=""
HOOKS="base udev autodetect pata usbinput keymap filesystems"
I had it with
Code:
MODULES="pata_ali ata_generic"
and with scsi in the HOOKS as the result of the install, but the behavior was exactly the same.
Oh, and the machine I am using is a 4 year old laptop. Nothing in there is scsi or sata.
I hope anyone can help me with those.
ThanksHi, I'm a "newbie" too. Coming from Gentoo/Debian. Installed Arch this week and I think it could be just the distro I have been looking for.
I too had the same problem and think it's related to the pata modules. ¿Did you have to use the legacy-ide option when installing from the CD? I'm using old hardware (4 year old laptop) and had the same symptoms you are describing. I exchanged pata with ide in mkinitcpio.conf. My MODULES and HOOKS looks like this:
MODULES="ide_disk ata_generic"
HOOKS="base udev autodetect ide keymap filesystems" (deleted scsi and sata also because I don't think I need them).
Then run mkinitcpio.
I also had to change my device names in /etc/fstab from:
/dev/sda2 / ext3 defaults 0 1
/dev/sda5 swap swap defaults 0 0
to:
/dev/hda2 / ext3 defaults 0 1
/dev/hda5 swap swap defaults 0 0
And finally /boot/grub/menu.lst from:
kernel /boot/vmlinuz26 root=/dev/sda2 ro
to
kernel /boot/vmlinuz26 root=/dev/hda2 ro
¿Any experienced user can confirm that I'm doing the right thing? I didn't find documentation in the wiki for old systems. Only the mention of an ide-legacy option.
Hope it helps.
Last edited by Malakin (2007-04-29 02:29:31) -
VS 2005 not recognizing CR XI release 2
Visual Studio 2005 not recognizing CR XI release 2.
Using XP.
I am a newbie to CRXI and VS2005.
Sequence of events:
I had installed Crystal Reports8.5.
Then installed VS 2005.
Because I needed CR XI, I uninstalled Crystal 8.5.
Then installed CR XI release 2. (SP 2 and 5)
Now from VS 2005 help -> I donu2019t see CR XI Release 2.
I only see
Crystal Reports
Crystal Reports for Visual Studio 2005
I tried different permutaions of installing and uninstalling CR XI R2 and VS 2005 but had no luck.
When running the C# program (that communicates between our Java App and Crystal Reports) , It complains about not able to find the following
CrystalDecisions.CrystalReports.Engine
CrystalDecisions.Shared and
CrystalDecisions.Windows.Forms
On my XP machine, these are under
C:\Program Files\Common Files\Business Objects\2.7\Managed
But for my colleague who has this working (Vista machine), these dlls are under
C:\Program Files\Business Objects\common\3.5\Managed folder
On my machine there is no folder called u201Cmanagedu201D under
C:\Program Files\Business Objects\common\3.5\
I am assuming that if
- VS2005 realizes that there is CR XI Release 2 on my machine, the during the installation of VS2005 installation it will probably add the dlls under ...\common\3.5\managed\
and I will be all set.
Any help in this matter is appreciated.Hi Jonathan!
Thanks a lot for your quick reply.
On the Help => About:
It does not say "developer" anywhere.
It says:
CR Professional: Product Type: Full
Product Version; 11.5.8.826
This product is NOT REGISTERED! Please take a moment to tegister
Registration Number: XXXXXX
and some additional info sales phone #s etc..
How do I get it to say it developer?
Did My install go bad?
Thanks again Jonathan! -
Accessing multiple PSD layers in Adobe Photoshop Touch from Creative Cloud is important to me. When will Touch be updated with this function? Want the ability to view multiple layers the same way Creative Cloud website can. Having the ability to turn multiple layers on an off in Touch from and uploaded PSD file. As it stand Touch flattens imported Layered PSD files. (Not very useful)
Hi Bford225,
I moved your post over to the Photoshop Touch forum because it seemed mostly about Photoshop Touch.
Currently, I'd recommend converting RAW images to Jpeg in either Photoshop or Lightroom and then uploading them to Creative Cloud for working with them in Photoshop Touch. I know raw support is something our developers are considering so please add your vote here:
http://forums.adobe.com/ideas/1227
How you best incorporate Photoshop Touch into your workflow is hard to say. What works best for one person may not be true for everyone. Photoshop Touch obviously doesn't have all the capabilities of its desktop counterpart but it does have the ease of use and portability of being on a tablet. Personally, I like using Photoshop Touch for editing images taken with the iPad or my iPhone for convience versus transferring to transfer to the computer, or even if I still do, I can do some of the initial edits from the tablet first. Its nice when I only have the tablet available and not a computer. For images I take with my DSLR I always do my editing in Photoshop and Lightroom. I'm able to make any adjustments on the computer much faster than on a tablet.
If you have the option to shoot in both Jpeg and RAW that might be good option (best of both worlds). Do you have the ability to import images from the camera without using a computer - using a camera connectivity kit or something like that? My recommendation would be expermentation, test out different workflows on the tablet and see how you like it and find what works best for you.
-Dave -
"This disk is not recognized by this computer"
I have a FireWire LaCie external disk, that suddenly stopped working.
Did some copying of files and then I discovered some folder were missing.
Then I restarted and got the message "This disk is not recognized by this computer. I did choose Igonre and when I run Disk Utilty I get this message:
Verify and Repair disk “disk1s9”
Checking HFS Plus volume.
Catalog file entry not found for extent
Volume check failed.
Error: The underlying task reported failure on exit
1 HFS volume checked
1 volume could not be repaired because of an error
What shall I do? I'm panicking, since there are life-important (almost) files on the disk.
I have Data Rescue II - do I dare to run the program, or shall I take the disk to a company??Bought the Data Rescue II, have restored most of the files. I think so, at lest. Many orphans, but at least they do have their names intact, and I have a pretty good idea where to put them. I only hope that the PSD files are intact too, all my video assets are on Beta and can be re-captured if needed.
Tanks for your tip!
It's the SECOND failure today - first I replaced an existing folder with an empty one and copied another 40 GB of files to the disk. Not much to rescue there...
And then this happens. Not having a good week so far. -
Good Morning Everybody!
I am a newbie in Java and I want to start writing my first application.
I did write my code and ready to compile it.
01/21/2008 10:14 AM <DIR> ..
01/21/2008 10:14 AM 250 first.java
C:\java\main\src\january>javac first
'javac' is not recognized as an internal or external command,
operable program or batch file.
C:\java\main\src\january>java first
Exception in thread "main" java.lang.NoClassDefFoundError: first
Here is my code:
Public class first {
public static void main(String[] args) {
for (int i=1;i<=50; i++)
System.out.println(i);
What am I doing wrong?now I am getting the following error message:
C:\java\main\src\january>dir
Volume in drive C has no label.
Volume Serial Number is 44A4-79F1
Directory of C:\java\main\src\january
01/21/2008 02:11 PM <DIR> .
01/21/2008 02:11 PM <DIR> ..
01/21/2008 02:11 PM 257 first.java
1 File(s) 257 bytes
2 Dir(s) 7,320,764,416 bytes free
C:\java\main\src\january>javac first.java
C:\java\main\src\january>dir
Volume in drive C has no label.
Volume Serial Number is 44A4-79F1
Directory of C:\java\main\src\january
01/21/2008 02:12 PM <DIR> .
01/21/2008 02:12 PM <DIR> ..
01/21/2008 02:12 PM 413 first.class
01/21/2008 02:11 PM 257 first.java
2 File(s) 670 bytes
2 Dir(s) 7,320,764,416 bytes free
C:\java\main\src\january>java first
Exception in thread "main" java.lang.UnsupportedClassVersionError: first (Unsupported major.minor version 50.0)
at java.lang.ClassLoader.defineClass0(Native Method)
at java.lang.ClassLoader.defineClass(Unknown Source)
at java.security.SecureClassLoader.defineClass(Unknown Source)
at java.net.URLClassLoader.defineClass(Unknown Source)
at java.net.URLClassLoader.access$100(Unknown Source)
at java.net.URLClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClassInternal(Unknown Source)
C:\java\main\src\january>java first.class
Exception in thread "main" java.lang.NoClassDefFoundError: first/class
C:\java\main\src\january>
Maybe you are looking for
-
I am a student and an aspiring filmmaker.I am also into digital cinematography (Canon 550D) and now will be venturing into editing. I am in DIRE NEED of help I have a few problems regarding the purchase of Macbook pro.I live in Kolkata(India).I have
-
Proforma Invoice with reference to schedule Line
Dear Experts, Whenever we create proforma invoice related to sales order, the system will copy every thing from sales order and same thing will be reflecting in proforma Invoice. If I want to create a proforma Invoice only for partial, can I do it.
-
WRT54GS v6 Drops connections after 30 minutes
Almost to the second. That's my only complaint with this router. Any SSH or remote desktop sessions I have get canned. I searched and saw a post that said to try a lower MTU (1300) and change to channel 11. I did both and didn't see a difference. Swi
-
Hello, This error occurs on some computers and but not others. I even tested it with the most basic word document, no formatting and scanned it. It works on a few systems but others get the message: Unable to process the page because the Paper Captur
-
Finding dynamic memory allocations in core file
Hi, Is it possible to find out which data structures were allocated by analysing a core file? I want to find out which objects are causing the memory to increase, and I have the core file of the program. Thanks in advance, Paulo