Newbie Editing Issue

When I import an audio file into the sample editor and highlight a section to edit, editor refuses to allow me to cut the section (the 'cut' selection won't even light up, only 'copy' lights up). Pushing APPLE-X only results in a warning 'Boing!' What do I need to do to allow cuts to be made? Am I importing the file improperly? Is there a 'safety' I need to deactivate? Or am I just truly lame? Any help greatly appreciated. Mat

Hi,
this is strange! Sounds like the file is read-only. If you select the file in the Finder and press Command + I (show info), at the bottom of the info window you should see that you have read & write access on your file. If not, you should change the rights to read & write.
Hope this helps....
Regards,
Jaap

Similar Messages

Why iCal cancel of event edits issue is still not fixed after over 2 years?

Why iCal "cancel of event edits" issue is still not fixed after over 2 years?
I have been in the software engineering industry for over 14 years, but I have never seen a large corporation being so slow at addressing major issues like these.
What would it take for Apple to start working on this issue?

Yup. This is fully ridiculous that you can't cancel your updates once you start. I love the tool but this is on pretty significant issue.
Sometimes I accidentally move a mtg or make some edit while viewing and you can't back you!!
If you feel the same way, you should post a note here:
http://www.apple.com/feedback/ical.html
Message was edited by: SteveMc10123

Citrix Netscaler AppXpert with Sharepoint 2010 Page Edit Issue

Posting this as a questions and discussion point.
The issue is in using Citrix Netscaler with AppXpert with SharePoint 2010. I've seen this issue for two customers.
Configurations:
- Citrix Netscaler as the load Balancer
- Netscaler AppXpert for SharePoint deployed on Netscaler (using either AppXpert version 1.1 or 2.0)
- SharePoint 2010 Standard or Enterprise editions
Issue:
A SharePoint user with appropriate rights go to a SharePoint page. They choose Edit page, make changes and want to save changes. At this point all SharePoint ribbon options on the top are greyed out. End result, users are not able to make changes to their
site pages. Issue happens for everyone including Farm Admins.
Cases:
a. The users are able to edit and save SharePoint wiki pages if I point user's PC to the SharePoint web server WFE by changing their local host file.
b. On Citrix Netscaler, if I use the traditional load balancing i.e. without Citrix AppXpert, then the users are able to edit and save the pages. That is an option if the customer is using SharePoint 2010 Standard. That is not an option if a customer is
using InfoPath forms. InfoPath is a feature of SharePoint 2010 Enterprise edition. Citrix AppXpert for SharePoint is needed to make the InfoPath work. Else the users get session errors when they use InfoPath Web forms.
c. The issue happens on almost all combination of OS and browser. XP, vista, Win 7, Win8, Win8.1, IE8, 9, 10, 11 and other browsers like chrome etc as well.
Please share your ideas and suggestions.

Hi Faisal,
As I understand, the issue will be solved when end users directly connect to SharePoint WFE servers. Since the issue is related to third party products, I'd recommend you contact their support engineer for sufficient resource and assistance. For your convenience:
http://discussions.citrix.com/forum/150-support-forums/
Should you need more assistance, let me know. Thanks for the understanding.
Regards,
Rebecca Tu
TechNet Community Support

Editable issues in sap interactive adobe form

Hi Experts,
we are using AdobeLiveCycle designer to create the pdf form out of sap. After creating the form to interact with sap.
When we execute the program automatically pdf will download the particular folder. In that pdf form is not an editable mode at the time. And it will change the editable mode on next day.
so, please suggest the solution to close the issues.
The following error message occurs when opening this form in Reader and attached screenshot also.
"This document enabled extended features in adobe reader the document has been changed since it was created and use of extended features is no longer available. Please contact the author for the original version of this document "
Regards,
Satheeshkumar.M

Hello Satheesh
Is this issue resolved ?
Also mark this Discussion with a Correct Answer and Helpful Answer where appropriate.
See http://scn.sap.com/community/support/blog/2013/04/03/how-to-close-a-discussion-and-why
Even if you discovered the solution without any outside contributions, it helps others to understand what the solution turned out to be
Regards
Sandy

Formscentral to Acrobat X editing issue.

I created a form in FormsCentral. I've exported it to Acrobat 10. How can I add a watermark? I "do not have sufficient privileges" to do it? Same issue with header/footers.

Hi;
This FAQ describes how to edit a FormsCentral PDF:
http://forums.adobe.com/docs/DOC-3661
Thanks,
Josh

Extracted punctuation and editting issues in Contacts

I waited to install from 10.6.8 because of the many issues I saw/heard people were having, then I heard that it was fine and I installed 10.8.2 but wow, what a nightmare!
The most tragic issue is the new format of Address Book. First of all, the new "Contacts" application is horrendous and looks like a 1988 Corel Draw design, if Corel was around back then. What gives? I've learned that if something works—Don't fix it! Who at Apple allowed for this to go through? The staff must have had a lot of beer and wine that day! Is Apple going to turn its OS into a kiddie book because that is what this application looks like. Please return us to our original glory; there was no need for this circumcision ("to cut, about, around, and through").
First, it seems that there are the two duplicate file systems, but since I don't know what or where iCloud is, I am not willing to make that my primary backup site. So I have to read the manual about that.
Here is the actual problem, when installed, Contacts actually strips the punctuation from all my emails. This means the symbol ("@") and the periods (".") in my emails. Even though I manually try to edit this, I am not allowed to make edits in the emails!
In addition, I can no longer add new phone numbers or entries, as one would do by clicking on the green "+" symbol. The only thing I can do, is write notes, and click on the delete entries ("-").
I wonder why, with so many issues, Apple hasn't fixed this promptly, and/or returned to the previous Address Book version?

Actually I did not import, I just reinstalled the new software and it automatically did that. I have tried resetting the PRAM and that didn't do anything but as soon as I figure out where the Power button is on my wireless Apple keyboard, I will try to rest the Mac Mini, which is lacking some feature, I read somewhere, so sometimes this causes problems.

Viewing and Editing Issues with iPhoto 09

While I have enjoyed the new features of iPhoto 09 vs iPhoto 08, there are two differences that may be bugs or may be "new features." The first is that while viewing images within an event, the image zoom slider in the lower right corner of the window will no longer zoom an image to full view within the image browser. I only get a minimum of three images left to right. Any ideas why I can't zoom fully without opening the edit window or clicking on the image to zoom it to full screen (not within the image browser)?
The second question has to do with editing. When I take a portrait image and open the editing window, the image is rotated into landscape mode. This did not happen in iPhoto 08. Is anyone else seeing this? If so, is this a new "feature" or a bug?
All of all of my images are stored as RAW file format.

Thank you both.
For the image viewing, I'll accept that things sometime change. In fact, if you click once on an image so that it is highlighted, you can go in and out of zoom by touching the space bar, and then navigate with the left and right arrows at full screen.
When I encounter an image that has a rotation issue in edit, I'll use Revert to Original to fix the image.
I've been using iLife/iPhoto since they first came out years ago, and the interface generally added things, not remove them...oh, well, in iPhoto 09, the good clearly outweighs the bad. I only wish I now had a camera with built-in GPS, but I've still been having fun entering locations for all of my photos.

AVCHD/MTS Editing Issues in Premiere 2014

Greetings, folks. I am a newbie to this forum and to Premiere in general.
Background
I have a ton of .MTS files I have pulled off my Sony HDR-CX700 over the years and are now stored on hard drives, without any of the other associated files. In searching through this forum, as well as others, it seems that these files are supposed to stay together, as Premiere and other programs look for additional files as part of the AVCHD "wrapper." These files do play in VLC with sound and I do seem to be able to import them into Premiere. However, they don't seem to be able to be played or edited in any fashion.
I have attempted to convert them via Media Encoder (using various presets for YouTube, H.264, DNxHD), but that has merely yielded files that show the same behavior in Premiere. Specifically, I can see the file and it looks valid, but doesn't appear editable. I have heard some folks mention ClipWrap as a fix-all for this type of situation, but it seems crazy that there's not some solution already included as part of the CC suite. I am using CC 2014 version of both products.
Question
How can I get my .MTS files into a format that I can edit or what I am doing wrong in Premiere that is limiting my ability to edit them? Again, I don't have the option of copying the file folders over again, since, for the vast majority of them are gone forever. I just have .MTS files that play perfectly in VLC.
Any help or insight would be appreciated. Thank you!

Hi,
Please try this small step for one of the files. Change the extension of the file from '.MTS' to '.M2TS' and then import in Premiere.
I hope that works for you. Let me know the outcome.
Regards
Sarthak

JDev 10.1.3 Preview Edition - Issue

The JDev 10.1.3 Preview Edition has issue with the "Go to Declaration" context command (i.e. right-click on the editor to "Go to Declaration". It does not recognize the .class syntax.
For example, the following code will have problem accessing the isAssignableFrom() declaration:
SomeClass.class.isAssignableFrom(obj.getClass());
vs.
This code will be OK:
this.getClass().isAssignableFrom(obj.getClass());

This is a WSDL file from a Web Service provider which we will have to uses as it is.
Suprisingle the same WSDL file works just fine in Jdev 10.1.2. But Jdev 10.1.2 does not create all the .java files specified by WSDL.
Jdev 10.1.3 creates all the files but does not work.

KM Local Editing Issue

Hi All,
I have a strange issue with KM local editing feature. Whenever I try to edit an PDF file, it shows an error "The download of the document failed".
Based on the sap notes available and previous KM post, I did check the internet explorer settings and docservice dll's in system registry. Everything is in place. It doesn't show an error while doing editing for any other file types like .txt and .docx etc..
In fact in temp folder for my machine, I can see the KM folder path created under the folder docservice. But it is empty.
System version is NW 7.3
Any pointers to resolve this issue is appreciated.
Regards,
Mahesh

Hi,
This might be due to the fact that the PDF cannot be edited unless we open the PDF with the suitable tools like PDF editor. Portal doesn't have the inbuilt facility or tool to edit PDF. This is not in the case of text or html files. POrtal has inbuild HTML editor to edit the HTML files. Irrespective of the portal versions we have, we cannot edit a PDF file from the portal.
It is possible if you install the PDF editor in your local machine and the corresponding plugin is added to your browser.
Thanks,
Mahendran B.
Edited by: Mahendran Balasubramani on Jan 27, 2012 2:31 PM

IPhoto Editing Issue

I bought a new Mac mini, i can open iPhoto, and I can see the groups of photos, but when I try to open one to edit it I just get a black screen.
When I adjust the zoom on the bottom left I get a really small version of the picture, but I can't get the picture bigger on my screen.
I tried all the rebuilding options, and nothing seems to fix the issue.
I don't have any screen issues to speak of otherwise. I'm using a USB 3.0 Targus docking station to send to my 2 dual screen Samsung monitors.
Mac Mini 10.10.1 with Intel Iris (Late 2014)
iPhoto 9.6
<Subject Edited by Host>

This is all I get. Only after I adjust the slider for zoom on the bottom left. It isn't adjustable, I can't make it bigger. It's all I can see...and frustrating.
If I don't adjust the zoom slider on the bottom, I don't even get that picture in the middle. its just black.
All I did was synch my photo stream which is on my iCloud account. I didn't import from prior Mac version as this is a new Mac, our first.

COllection Editing Issue

I have a collection on our state K12 site (not yet published) that will not open the Feed Editor for editing content. When I click the "Feed" link, I get the framed site, but no content. I do not get any error messages. Anyone had something similar happen and find a way around the issue?

Greetings from Tennessee;
I encountered this issue when I was prepping our site for the transition to the new Site Manager environment. Unfortunately, I could never find a "work around". The problem seems to be with the Site Manager environment.
Apple's engineers monitor this discussion and should respond promptly. All the best on getting your site up and running!
Syd Rodocker
Tennessee Department of Education
itms://deimos3.apple.com/WebObjects/Core.woa/Browse/tbr.k12.edu-dz

Captivate 4 - audio editing issue (distortion heard once published)

Hi -- I am working on a 17 minute movie with audio on each page (total project size about 60mb). I recorded the audio outside of Captivate and imported the .wav files (for some reason the .mp3s sounded too tinny). When I started the project in November I had no problem editing the files (removing sighs/pauses, inserting silences) and adding to the slides.
For some reason in December I started running into issues. I would go to edit a sound file on a slide, it sounded good when played back, but when I previewed or published the sound file I just edited it would have a layer of sound on top of it making it distorted. Also, I no longer have the ability to add silence at the beginning and end of the audio file (which I was able to do in November). I add it in edit mode, can see/hear the pause but when I save and close out those beginning and end silences disappear.
I just got final feedback and was making adjustments on two slides but the same thing happened. The audio files I edited would sound distorted when played back in swf form. The only way to save the project was for me to open an old archived version, export that audio, re-import to my production project and it worked fine. But I cannot edit it in Captivate. If I do, the distortion gets added.
I am publishing as audio quality: MP3, 96kpbs, 44.10 KHz.
Any thoughts? I like to edit directly in Captivate and don't want to have to do the extra step of editing the audio in another application.
Thanks!

Hi there
If you want to add silence at either end, your first step will need to be to position the playhead ever so slightly away from the true end or beginning. Otherwise, Captivate ever so helpfully discards the silence. So the silence needs to be inserted between the ambient noise.
Actually, this is a nice segue into a technique you may wish to use. Select a section of the ambient noise and paste it repeatedly. This will eliminate the "dead air" you hear with total silence. Sometimes inserting silence is one of those - "the cure is worse than the disease" sort of things.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Edit issues

Is there a list of compatible or required web browsers?
What I have been experiencing for several times now, using Firefox 20.0 (Mac OS X)
"undo" does not work, although available.
"copy and paste" does not copy the selected text, instead copying the complete paragraph.
"copy and paste" removes blank lines, when copying text from the host or within the editor.

also just now the edit reply fails to engage which i was trying to edit my post what is causing this issues ????
Please provide Kudos to whom has provided answers or
good points or advice..
Aslo if the questions or issues solved please check it
"Accepted"
Thanks and you are welcome _____ Rick

Unable to edit issues list once items are created

Hello,
I have been trying to do a standard edit to an infopath from to a Project Site Issue list. I want to add the ID to be visible on the form. However, on any issue list that already has items in the list, if I try to publish the InfoPath form, I
get the following SOAP error: "The SOAP response indicates that an error occurred on the server: Server was unable to process request. ---> A duplicate field name "Category" was found."
I have tried the following:
Checking for duplicate fields in list settings, content types, SharePoint designer.
Refreshed the fields in the InfoPath form before trying to make any changes.
Tried saving a change to the category field in List settings (adding a 5 to the name) and then editing the form.
Even if I make no changes to the form, it has been refreshed after opening, and I try to publish the form, the SOAP error occurs.
The category field is the standard out of the box field, and other than adding additional values, there were no modifications.
I am able to publish the form on a site where no issues have yet been added, and I was able to add the ID field to the site template.
Has anyone run into this issue? Any resolution?
This is a Project Server 2013 project site on SharePoint 2013.

Hi,
Based on your description, my understanding is that the InfoPath form of the list cannot be published to SharePoint if there are items in the list.
I recommend to verify the things below:
Please click File > Design Checker in InfoPath to see if there are any errors.
Open the form in InfoPath and keep the form open. Then delete the existing InfoPath template in the list settings and then click publish the form in InfoPath to see if the issue still occurs.
To narrow down the issue scope, I recommend to create a new issue list and test with InfoPath form to compare the results.
Check ULS log for detailed error message in SharePoint.
To further understanding this issue, could you please provide some screenshots of your InfoPath form and the customizations you did on the form?
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Newbie Editing Issue

Similar Messages

Maybe you are looking for