Newbie: External Hard Disk Advice.

Dear FCP users,
Could you please offer some advice regarding an external hard disk for Final Cut Pro X.
I currently have the following:
iMac 24-inch 2.8GHz Intel Core 2 Duo
Sony HDR-SR12
Final Cut Pro X (about to purchase)
I'm looking to upload my captured HD video to an external hard drive and then edit and render with Final Cut Pro X.
This is where I become a bit stuck and searching Google brings up very old information.
I'm thinking that Firewire 800 will be the best solution based on ports available on my iMac. If so, i've been looking at the following, would this be suitable?:
Iomega 2TB MiniMax Hard Drive FireWire 800
http://store.apple.com/us/product/H0815VC/A
What other options are available to me? I've also heard of eSATA and RAID but not sure what these are and if they are possible with my iMac.
One last thing. I also have a Time Capsule connect via network cable. Would another option be to use a networked external hard drive?
Sorry, but like I said, i'm new to all this. Hope you go easy on me and offer some advice.
Regards,
Richard.

Hi Kenneth,
Thanks for the reply.
Sorry but i'm really new. Are Logic Files the recorded files on my Sony HD Camcorder? Also I am unsure what VSL samples are.
Is there any point me buying an external HD that has eSATA? I mean, can I connect this to my 24" iMac? Or am I limited to a drive that has 800 Firewire connection?
I currently have an external HD connected to my network as a media server. Would an external HD be better for video editing with this type of connection compared to 800 Firewire?
About 5 years ago I used to upload my uncompressed SD footage directly to the computer's HD and use a mixture of Sony Vegas and Adobe After Effects for the editing so i'm ok when the footage is on the computer.
I'm just worried about editing HD footage as it's so much bigger and don't want problems editing when the footage is stored on an external drive instead of internal.
Thanks in advance.

Similar Messages

  • I have a 1TB WD external hard disk, which suddenly cannot be detected in my system. When i connect the hardisk to the macbook, the disk appears and immediately disconnects with the message "Disk not properly ejected". Any advice ?

    I have a 1TB WD external hard disk, which suddenly cannot be detected in my system. When i connect the hardisk to the macbook, the disk appears and immediately disconnects with the message "Disk not properly ejected". Any advice ?

    verify on another Mac if the same
    WD is having issues with mavericks as you can see on the WD forum, did you install any WD software (never do that) when you connected the drive for the first time?
    possible issue is a dead SATA bridge card or the new WD firmware w/ Mavericks.
    SATA card issue
    Your dead external hard drive is likely fine! Great hope for your 'faulty' external HD
    http://community.wd.com/t5/External-Drives-for-Mac/bd-p/passport_mac
    verify on another Mac if all possible

  • Need advice for SAP installation on External  Hard disk

    Hi Gurus,
    I have HP laptop with configuration of 512 MB RAM and 50 GB hard disk...i recently bought 250 GB segate external  hard disk for SAP installation...My doubt here is if i  install SAP in external hard disk and will it work properly if i connect my laptop?
    ur advice is much appreciated
    Regards
    Dinesh

    Hi Dinesh,
    I have installed SAP on external harddisk.
    And it will work properly.
    But i think you need to increase your RAM.
    After installation, please keep in mind one thing.
    You will have to attach your external harddisk before your machine starts, because your OS will be in internal harddisk, so SAP and oracel services won't be able to run without external hard-disk.
    and in case you attach after system startup, please start all services.
    Regards,
    Payal Patel

  • How to Export pictures from iPhoto to external hard disk? Newbie here! Please help!

    Need your help guys. Just bought a new Macbook Pro. Loved using the iPhoto but after managing a lot of my photos, realised that I cannot export an edited photo from iphoto to my external hard disk. I am not sure what iphoto version I am running right now but my Mac is brand new and comes with the pre installed softwares. Whenever I try to export an event, folder or even a picture, I will get this message   unable to create/Volumes/FreeAgentDrive/ after going thru the Export process in iphoto. Please help!!!

    Your Mac can "read" data from an NTFS drive, but can't "write" files to it.
    If you intend to use this drive only on Mac computers, then, use Disk Utility to erase it and format for Mac OS Extended (Journaled).
    If you want to be able to write files to the external drive AND still use it with Microsoft Windows computers, then, format it as MS DOS. (Or, on a Microsoft Windows computer, format the drive as Fat32. However, if you use Windows XP, be aware that the largest size you can do this with is 32Gb. Vista and Windows 7 doesn't have this limit.)
    Another option, do you have to use an external hard drive? What about a flash drive? 

  • How to take backup of database on external hard disk

    Hi Team,
    We have a server with three instances SOX,GRC and SM2. We have attached
    a external hard disk to take backup of database. While taking backup of
    any database it gives error as attached. We can take backup of
    transaction log on server's disk but not on external disk. Kindly have
    a look on attached error and advice us.We are taking backup at sql
    server level.
    version: SQL SERVER 2005 64 bit
    Regards,
    Digambar

    Hi Markus,
    >You can´t backup a 210 GB database on a 200 GB disk...
    We learn a lot every day on these Expert Forums !  
    In fact, it could even be possible if it's the database enveloppe which is 210 GB and the actual data is less than 200 GB !
    I dare to hope that it's not a production system which is backed up with an external disk...
    Regards,
    Olivier

  • Problems with iPhoto after exporting library to external hard disk

    Hello all,
    I am using iPhoto 8 on an iBook G4. I recently attempted to back up my iPhoto library to an external hard disk. I did this by dragging the iPhoto library to the external hard disk. I did not delete the library on my own computer. Since I've done this, iPhoto has not been problematic. For instance, when I attempt to open an event on my computer, I can not see the thumbnails of all the photo's in the event - iPhoto will display each individual photo in sequence. If I want to print a picture, I have to export the entire event - I can't just drag the thumbnail to my desktop. Also, when I attempt to upload new pictures from my camera it produces an error.
    Does anyone know what might be going on? I need to be able to access my photo's, so can anyone give me some advice on how to fix whatever I've done?
    Any help you can give me would be much appreciated.

    Gina2008
    iPhoto will display each individual photo in sequence.
    There's a slider lower right of the iPhoto Window - drag it left.
    Why are you exporting to Print?
    when I attempt to upload new pictures from my camera it produces an error.
    What does the error say?
    As for accessing your pics:
    There are many, many ways to access your files in iPhoto:
    For 10.5 users: You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Apple-Click for selecting multiple pics.
    Uploaded with plasq's Skitch!
    To upload to a site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
    This is also true for emailing with Web-based services. If you're using Gmail you can use THIS
    If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto. With 10.5 you can access the Library from the New Message Window in Mail:
    Uploaded with plasq's Skitch!
    If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
    Or, if you want to access the files with iPhoto not running, then create a Media Browser using Automator (takes about 10 seconds) or use THIS
    Other options include:
    1. *Drag and Drop*: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
    2. *File -> Export*: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
    3. *Show File*: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
    Regards
    TD

  • Partitioning of an External Hard Disk

    Hello everyone, I just bought a Western Digital External Hard Disk (500GB) and I will like to partition (I assume I need to partition it into two separative drives - 1 for Windows and 1 for Mac) it for the following uses:
    1. Able to read and write files from my Macbook Pro (Lion OS)
    2. Able to read and write files from the Boot Camp Partition in my Macbook Pro (Windows 7)
    3. Able to read and write files from other user's computers (Either an Apple OS or Windows OS)
    4. While on my Lion OS, I'm able to read and copy files from the Windows Partition of the ext. hard disk
    5. While on my Windows 7 OS, I'm able to read and copy files from the Mac Partition of the ext. hard disk
    Your advice is greatly appreciated and I hope to hear from you soon. Thank you very much!

    The simplest method is to format the drive in exFAT. Each OS can read/write to it.
    However, it doesn't support user permissions.
    All Windows versions back to XP (with a patch) can read/write exFAT. OS X back to 10.6.5 can read/write exFAT.

  • Help reg what formats to be used for my new 4tb mini stack to back up my macbook and 2 external hard disks

    Hey Guys,
    I need an advice from you experts regarding the different formats to be used to format my New 4 Tb ministack from OWC. I  have a  Mid 2010 Intel macbook pro with 500gb hard disk using Mountain lion and two external hard disk from Samsung and Iomega 1Tb each. I want to format this ministack into 4 partitions each of 1Tb each.
    1) 1 Tb for time machine to back up my macbook pro.
    2) 1 Tb of  Free space to be used to store extra data using both windows and mac os.
    3) 1 Tb for Samsung back up
    4) 1 Tb for my Iomega back up
    I know that for 1st option i need to format the partition (volume) to Mac os extended (journalled). I need help for  others.For  the 1 Tb free space, can i use NTFS so that i can use it on my wifes windows laptop and use a third a party application like tuxera NTFS for use on my macbook which i am already using to use my samsung and Iomega Ext HDD.
    Also  What format is required for these  two 1 Tb volumes dedicated for external hard disk backups and  how can i back up my external hard disks to these formatted volumes. Do i need to  format them to Mac os extended (journalled) as well as i shall be using macbook pro to back up these hard disks.
    Which would be the best software to back up these Ext hdd,can i use time machine? or CCC ?
    Your help help shall be gretaly appreciated.
    Thanks in advance.

    Get Disk Warrior that will repair the problems without requiring that you reformat the drive - $99.00 on a bootable CD. Will not work on a FAT formatted drive.
    You will need to use Drag and Drop to save your files by copying them from the bad drive to a good one.
    To reprep the drive:
    Drive Preparation
    1. Open Disk Utility in your Utilities folder.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.

  • Cannot copy files from external hard disks

    This is happening often enough to be really painful:
    I insert a hard disk. I browse the files on it. I open a new window of Finder and drag some files from the external hard disk into my own machine (OSX Leopard 10.5.5). It croaks, telling me some "permissions" are wrong (Error -36).
    Browsing Google and Macosxhints and all of that, the suggestions indicate that I should "repair permissions", "repair disk", and reboot. All done. Still doesnt work.
    What now? I never had this problem with Windows. What's with this permissions drivel on OSX and how can I fix it once and for all? I only use my machine to browse on Firefox/Safari, talk with Skype, edit with Coda/Transmit, and then Office documents. Which of these tools changes these mysterious permissions so that I have to keep "repairing" again and again???
    Thanks for any pointers or advice!

    I am on shaky ground here because I am totally ignorant about about Windoze and MS-DOS. What I can tell you, though, is that the Unix underpinning of Mac OS X is heavily reliant on the concept of "ownership" which, apart from other factors, has security implications. FAT32 has absolutely no concept of file ownership. (That's why Microsoft encourages everyone to use NTFS instead - mainly for the security implications).
    You need advice - Sorry! - from someone more knowledgeable than me as to how to change both the format (to Mac OS Extended, Journaled) and the Partition Scheme (to GUID) *+while preserving your data+*. I presume that you would need to find a temporary home for that data, after which altering the drive's structures would take only a moment - but as to how to then correctly replace the data onto that drive I would prefer not to say. I would guess that simply transferring the data back onto the drive now with a 'Mac-appropriate' structure would suffice - but PLEASE do not entrust your data to my 'guess'.
    Wait patiently for someone who knows how to advise you to respond in this thread, or post again with a possibly more descriptive/pertinent title.
    Sorry not to have been of any help.
    Andreas

  • Is it safe to keep downloaded movies in the Macbook Pro or do I need to use an external hard disk for those ? Please suggest.

    Is it safe to store the downloaded movies from iTunes in my Macbook Pro or do I need to store those separately in an external hard disk ? Please advice.

    It will be no better or worse than any other video file and should not be responsible for any system instability.  As I alluded to earlier, video takes up a lot of space and you can quickly use up that 200 GB of space.  Download a few files to you MBP and see what impact it has.  I have a couple of external HDDs dedicated to video files (and backups of same) due to the large file sizes. 
    If you find that space is getting tight on your MBP, then get an external for the video files and another one to back them up.  I have a couple of external HDDs dedicated to video files (and backups of same) due to the large file sizes.
    Ciao.

  • To Upgrade or Not To Upgrade (From External Hard disk to Internal Hard Disk

    Hi, need some advise here.
    Currently I have a External Hard Disk (320GB) connect with my IMac with Internal Hard Disk of standard 80GB.It is ok just that have to power on/off the External Hard Disk. It is very common that I forgot to power on the External Hard Disk and my iTune library goes to other location in the Internal Hard Disk instead of follow my setting in my External Hard Disk.
    So I am considering remove the standard 80GB in my IMac and change with the 320GB.Read some instruction/procedure on this to me look complicated with the thermal pad thing so now hesitating worth the risk to swap the hard dsik or just leave it as it is.
    Leave it as it is or change it?
    Any advice ?

    Here's a link to a take-apart guide I used a few times to replace & upgrade drives & memory in my old G4.
    http://www.xlr8yourmac.com/systems/iMacg4/imacg4takeapart.html
    No it's not as easy as opening up a pc, but the key word is patience. The key thing to remember is to make sure you get some heatsink paste from your local computer store, and apply it to the areas that need it before buttoning everything back up.
    It'll only take you a few hours if you work carefully. While you have it open I highly suggest upgrading your upper memory stick, as well as upgrading your superdrive. I get all my stuff here, they haven't steered me wrong yet:
    http://eshop.macsales.com/static_pages/index.cfm
    Sean
    San Diego

  • External hard disk wouldnt work !!

    Hello All,
    I just bought a Toshiba external hard disk and my Mac doesnt read it. I receive this must every time. I've tried it on Windows and it works just fine. I'm using OS X 10.9.3 .
    please help !!

    It appears you used to have MacFUSE installed, and it is no longer functional.
    Either take QuickTimeKirk's advice and reformat the drive to "Mac OS Extended (Journaled)", exFAT, or FAT32.
    Or find the latest version of FUSE for Mac and get that properly setup.

  • How can I download my photos from iphoto to the external hard disk? thanks!

    How can I download my photos from iphoto to the external hard disk? thanks!

    This is our resident iPhoto guru, Terence Devlin's, advice:
    You can move your iPhoto Library to an external disk or new Mac:
    1. Quit iPhoto
    2. Copy the iPhoto Library Folder as an entity from your Pictures Folder to the External Disk.
    3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
    4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.

  • I am using Windows 8.1 i have an External Hard Disk and one drive is now inaccessible due to sudden power failure few days ago. Now it shows "Data error (Cyclic redundancy check)". I want all my important files and Pics. How ?

    Hi,
    I am using Windows 8.1
    I have an External Hard Disk i have partitioned it to 4 parts.
    One drive is now inaccessible due to sudden power failure while listening Music from that drive few days ago.
    Now it shows "Data error (Cyclic redundancy check)".
    I tried all the procedures provided here like
    chkdsk /f, diskpart, rescan etc
    but no result :( (i mean all processes failed. They could not detect the drive).
    Please help me to get those data, pictures and project files.
    thank you

    Then why aren't you posting this in the Windows 8 forums found @
    http://social.technet.microsoft.com/Forums/windows/en-US/home?category=w8itpro
    This is a Windows 7 forum for discussion about Windows 7.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

  • Disk write cache corruption on an external hard disk

    Recently I purchased an external hard disk, to put all of my pictures of my baby due to space limitations on my internal laptop drive. Since my Canon camera 10 megapixel pictures take up a ton of space this was occurring at an alarming rate. My intention was also to back up to DVD but never got to it. This is both a comment and a question.
    Now said baby, is getting really good at pulling cords etc. He managed to do this on the external drive firewire cable. As far as i know the drive was not in the process of actually writing. However, after a few minutes and trying to re-plug the drive the OS crashed with a Grey Screen of Death hardware error that tells you that you need to push the power button..
    This apparently corrupted the drive's directory. Upon reboot the drive would not mount. Since there were time machine backups on the drive too Diskwarrior was not able to reconstruct the drive in the built in memory available on the computer. Time machine stores millions of files and Diskwarrior apparently wants to keep it all in memory at once. Since my computer has 2GB you would hope that would be enough but apparently not. So that failed. Other utilities seemed to be able to find the files but not restore the directory. I also took it to the apple store they were not able to recover it.
    I have to say this is extremely distressing, and hard to believe that a simple accident like this could cost the loss of thousands of pictures. I did send it to a rescue company but that was expensive but I think apple needs to do something about this situation.
    On Windows there is a way to disable the write cache for external drives. This is not available for Mac OS X. This would prevent this rather common occurrence of a plug accidentally becoming disengaged when the drive is not in the process of writing. This reduces the odds but I still think apple, in order to become clearly superior, needs a better solution.
    I know Apple has experimented with ZFS would this not eliminate this possibility of this kind of disaster? Is this in Snow Leopard desktop? I know they are thinking this is a business customer focused technology but clearly if it can eliminate this kind of thing then I think it is extremely useful to their non server customers. Perhaps there are other ways of dealing with this issue but ZFS is designed to deal with these issues. HFS+ is extremely fragile to disk corruption.
    I know my situation is not that uncommon and this is not the first time this has happened to me with an external drive. You would think I had learned. I hate to think of how many other people have had the same thing happen to them.

    Disabling a write cache would not help you with the problem you are having. Besides the write cache is on the hard drive and operates independently of the operating system. But nothing can protect you from disconnected an external drive improperly, and if the drive is in the process of being written to, and the problem comes from directory corruption, not file corruption, as in the case you have described, disabling a write cache would not have made any difference.
    For the future the magic word is: Backups.
    < Edited by Host >

Maybe you are looking for