Newbie: Flash tried to play a live or recorded stream that does not exist.

Hello there,
I have started a stream from Flash media encoder to flash media server. According to my encoder, it should be located at: "rtmp://localhost/live" and is called livestream.
In the Flash software I try and set the source of FLVPlayback component to "rtmp://localhost/live/livestream", and I get this error: "NetStream.Play.StreamNotFound : Adobe Flash tried to play a live or recorded stream that does not exist. Source can't be found.". Both the server and encoder is runnind and I am encoding.
Too, when I try and open the html with the stream in a browser, nothing appears.
What should I check?
Thanks.
Kind regards,
Marius

So just to clarify, the server is installed on the same machine that you are using to do the encoding, correct?
And you are using Flash Media Live Encoder to do the encoding?
I don't have Flash CS5 for I'm not sure what is in there to do the encoding.. but more on FMLE here:
http://www.adobe.com/products/flashmediaserver/flashmediaencoder/
There are two step used to get the encoding going with FMLE...
1. after setting all the config settings, click the "Connect" button. Then open the encoding log and you will be able to see if connection was made to the server or not. Can you successfully connect to the server? if not, what is the error message?
2. click the "Start" button and in the encoding log, you will see that the audio and video encoding has started. What does the encoding log say?
Best wishes,
Adninjastrator

Similar Messages

Adobe Flash tried to play a live or recorded stream that does not exist. Source can't be found

NOTE: This thread was started in the flash pro forum: http://forums.adobe.com/thread/898879?tstart=0 . However, because of adninjastrators recommandation, I open the thread here:
Hello there,
I have started a stream from Flash media encoder to flash media server. According to my encoder, it should be located at: "rtmp://localhost/live" and is called livestream.
In the Flash software I try and set the source of FLVPlayback component to "rtmp://localhost/live/livestream", and I get this error: "NetStream.Play.StreamNotFound : Adobe Flash tried to play a live or recorded stream that does not exist. Source can't be found.". Both the server and encoder is runnind and I am encoding.
Too, when I try and open the html with the stream in a browser, nothing appears.
What should I check?
Thanks.
Kind regards,
Marius

Thanks for your reply.
Server, encoder and player are all on the same computer.
Admin console confirms the existence of "livestream" of type "Live" and a "NetStream" called "ABAF". No idea what the latter is.
Also, thought I'd mention that I have to start the servers from the Control Panel -> administrative tools -> services. If I try and start the server from the start menu, they dont start.
Thank you for your time.
Kind regards,
Marius

Hey i cant get into creative cloud because it keeps asking me to verify and email that does not exist nor i have acess to. i cant find out how to sign out and i tried deleting it and re downloading it!

hey i cant get into creative cloud because it keeps asking me to verify and email that does not exist nor i have acess to. i cant find out how to sign out and i tried deleting it and re downloading it!

Change/Verify Account https://forums.adobe.com/thread/1465499 may help
-wrong email https://forums.adobe.com/thread/1446019

Tried to add JUnit Test in Eclipse -- "Test type does not exist" error

Hi guys,
I'm developing an assignment whose details I won't bother going into -- it's enough to say that we were introduced to JUnit testing a couple of weeks ago in university tutorials, and I've stupidly tried to add one to my project without fully understanding it all. This is in eclipse 3.1.1.
Basically, I followed eclipse's built-in tutorial called "Writing and running JUnit tests ".
1) Created class "TestFailure" with method "testFailure".
public void testFailure() throws Exception {
fail();
} 2) This then appeared as a .java file in my project (as well as on my UML diagram, courtesy of Omondo's UML plugin).
3) I decided it was too risky mucking around with this stuff in a "live" project, so went ahead and deleted the TestFailure icon on my class diagram.
4) I closed down eclipse.
5) I went ahead and deleted TestFailure.java and TestFailure.class from my project folders.
6) I opened my project again, and tried to execute...
... and now I keep getting a Test type does not exist error when I try and run it.
How on earth do I get rid of this?
Any advice/guidance is greatly appriciated -- oh, how I wish I'd not started messing with JUnit testing!!! :)

Um, okay -- I fully hold my hands up and admit that I don't know what I'm doing with JUnit testing (we only had a half hour intro to it) but figured I may as well learn by using the official tutorials. It's always a good place to start! Although obviously using a current assignment isn't the best idea ;)
I was executing my main class (obviously with my main method in there) to execute the program after I'd deleted test case classes, but strangely I've just shut down my machine and restarted and it's working fine. I'm not sure what the deal is here -- lesson learnt though, study new topics on a dummy project! :)
Anyway, if I waited until I understood the software and code I'm producing to its fullest, I think hell'd freeze over before I executed any code! :) Using a tutorial to learn a new aspect of software I'm already familiar with wasn't a bad move, IMHO. Just using it on this particular project was... Needless stress and all that.

Im trying to download ITunes, but it says the system does not exist.

Please let me know if anyone else is having this problem.

I'd like to have a closer look at that error message please.
Generate the error message again. While the error message box is open, hold down the Alt key and hit the PrtSc key. Paste the screenshot into an image file (using a program like Paint), and save the file.
Start a reply here and click the wee camera icon at the top of the reply window. Click "Choose file", browse to the image file, select the file and click "Open". Now click "Insert file" to insert the screenshot into the reply.

Trying to update existing apps; will only prompt me for an old iTunes account that does not exist any more

How do I get a prompt for my new account when updating existing apps? I had used one of my sons account for most of the apps on my iPhone. I have since move up to a iPhone 4S and created my own account to use iCloud. But everytime I try to update the exiting apps I am prompted for a password to my sons account. I am logged on to iCloud with my new account at the same time.
It looks like the apps retain some kind of tag to the original account used during download.
Any help would be appreciated.

Change the account in the iPhones settings

I tried watching project x after i purchased and downloaded it on itunes but when i tried to watch it says itunes has stopped working and yes i have tried to reinstall itunes and quicktime player but that does nothing can someone help?

I tried watching The Movie Project X After i purchased it and downloaded it o itunes but when i tried to watch it,it says itunes has stopped working. Yes i have tried reinstalling itunes and Quick Time Player but that does not help.

Let's try the following user tip with that one:
iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows

ITunes randomly stops playing purchases that have previously viewed on the same hardware. It has an error message about HD. How can this issue be resolved? What information is available besides the "learn more" option that does not deal with the problem?

iTunes randomly stops playing purchases that have previously viewed on the same hardware. It has an error message about HD. How can this issue be resolved? What information is available besides the "learn more" option that does not deal with the problem?
Many people have the same problem. However, there is little or nothing readily available to users. This problem has existed for two or more years. Does anyone have anything to offer about this disturbing problem?

Thanks for the suggestion kcell. I've tried both versions
9.0.115 and 9.0.124 and both fail with the policy permission error.
I also tried with and without your crossdomain.xml file but
with the same result. It looks like this file is intended for URL
policy, instead of socket policy. Recently Adobe separated the two.
When I run with the files installed on my dev PC, it does
work, which makes sense because the flash player isn't loaded from
an unknown domain.
I did get one step closer. If a crossdomain.xml in the server
root exists and the socketpolicy file is loaded from the app folder
then the first two warnings disappear. The logs now show:
OK: Root-level SWF loaded:
https://192.168.2.5/trunk/myapp.swf
OK: Policy file accepted: https://192.168.2.5/crossdomain.xml
OK: Policy file accepted:
https://192.168.2.5/trunk/socketpolicy.xml
Warning: Timeout on xmlsocket://192.168.2.5:843 (at 3
seconds) while waiting for socket policy file. This should not
cause any problems, but see
http://www.adobe.com/go/strict_policy_files
for an explanation.
Warning: [strict] Ignoring policy file with incorrect syntax:
xmlsocket://192.168.2.5:993
Error: Request for resource at xmlsocket://192.168.2.5:993 by
requestor from https://192.168.2.5/trunk/myapp.swf is denied due to
lack of policy file permissions.
Which basically says, everything is okay, but you stay out
anyway.
PS: I found the XML schema files here:
http://www.adobe.com/devnet/flashplayer/articles/fplayer9_security_02.html
and the socket policy schema:
http://www.adobe.com/xml/schemas/PolicyFileSocket.xsd.
UPDATE: When serving up the policy file on port 843 using the
example perl script then the socket connection seems to be accepted
and the connect succeeds. After that flex hangs trying to logon to
the IMAP server.

Z87-GD65: Live Update 5.0.112 does not display BIOS 1.8 update

As the title says Live Update 5.0.112 does not display BIOS 1.8 update for the Z87-GD65. Yet Live Update 5.0.111 does show the BIOS 1.8 update. Why is this so?

I have to be honest and say I am tearing my hair out trying to update the BIOS on this motherboard. Why is it so convoluted?
1. I tried the USB boot with FPT. I can't get the FPT and BIOS files to show when I reboot to the bootable USB stick. Apparently the FPT version is used to also flash the "me extension"? (Whatever the hell that is).
2. I can't use the Live Update because it is unreliable (as claimed by the forum).
3. I can't use MFLASH because that doesn't work properly and corrupts the BIOS.
4. Yet another method is to download the "MSI HQ Forum USB Flasher". Which is in a .RAR file no less!
Geez MSI you don't make it easy for the average punter. When I had a Gigabyte motherboard it was a simple Windows flash utility and it worked!
Is there one single easy way to update this BIOS?!

A newbie problem - Why 'ORA-00942: table or view does not exist'

Hi,
I am a newbie having a very basic problem.
I have just created a table by reading in a CSV file.
However when I try to SELECT from it, I get an error message saying :-
ORA-00942: table or view does not exist
How can this be when I can see the table name ?
I have tried a couple of things that I found in the Discussion Forum, like 'ALTER SCHEMA' and 'GRANT SELECT'.
Neither seemed sensible because I have just created a table, and sure enough, neither helped.
It's disappointing that something so basic can go wrong.
I will be very grateful for any advice.
Barry

This tool and forum is awesome. I'm a developer that was never touched HTMLDB and now with in a month I'm developing applications quickly and when I have a question I have this active forum to ask my sometimes stupid and othertimes valid questions! This is great! I don't know where you all find the time to help out so much!
It is a little addicting though... I find myself sitting down Saturday morning just to spend a couple of minutes reading the posts and next thing I know hours have gone by as I use what I read because I can't wait until Monday...
Thank you all for everything!!!! HTMLDB, APEX, Javascript and now in another post I'm learning about "Fine Grained Access Control" or "Virtual Private Database".
Enjoy, BillC :>)

Is there a way to add photos to the iPad without replacing the ones already loaded? I am trying to add photos from a folder on a computer that does not contain the other iPad photos.

Is there a way to ADD photos to my iPad without replacing the ones already there? I am trying to add photos from a computer that does not contain photos already synced to the device.

You can use a USB flash drive & the camera connection kit.
Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import. (You can not export using the camera connection kit.)
Secrets of the iPad Camera Connection Kit
http://howto.cnet.com/8301-11310_39-57401068-285/secrets-of-the-ipad-camera-conn ection-kit/
 Cheers, Tom

Hi i am getting an error like this while installing Live Cycle Server " The file merge_modules\lc11_common_iam_zip does not exist This file is required sucessfullly run the Live Cycle Installer.Can any one help me on resolving this issue it would be of g

Hi i am getting an error like this while installing Live Cycle Server " The file merge_modules\lc11_common_iam_zip does not exist This file is required sucessfullly run the Live Cycle Installer.Can any one help me on resolving this issue it would be of great help..thanks .

I think in your situation it would be worth trying the things listed under the event. It does have to do with FRS and it's easy to do. I've used it to fix journal errors after a server unexpectedly restarts and sysvol stops replicating. I
could see where it could fix your issue, and if it doesn't, you're out 5 minutes. :)
The listed registry key does not exist
Expand HKEY_LOCAL_MACHINE.
Click down the key path:
"System\CurrentControlSet\Services\NtFrs\Parameters"
Double click on the value name
"Enable Journal Wrap Automatic Restore"

I am trying to use Facetime and it says my devise does not have proper credentials??

I am trying to use Facetime and it says my devise does not have proper credentials. What does this mean? I have used it in the past.

While we all have MacBooks in this forum not all of us use FaceTime. There's a FaceTime Support Community where everybody uses FaceTime. You should also post this question there to increase your chances of getting an answer. https://discussions.apple.com/community/mac_app_store/facetime_for_mac

User gets "This network connection does not exist" when she tries to log on to Terminal Server (2008 R2)

User gets "This network connection does not exist" when she tryes to log on to Terminal Server (2008 R2)
I got more than 100 users. Shes the only one getting is. We tried four computers (All Windows 7 Pro)
Nothing useful in event viewer to mention.

Hi,
Thank you for posting in Windows Server Forum.
Does that user able to login previously?
From your comment, it seems that there is some permission issue with that user. As you have checked that user with different system also. Please check that user is added under “Remote Desktop User” local group and also allowed “Allow log on through
Remote Desktop service” permission under group policy. Also please check that when user tries to login it uses “Domainname\Username” format.
In addition for a try, also check by disabling firewall on one particular system.
To add users and groups to the Remote Desktop Users group by using Local Users and Groups snap-in:
1. Click Start > Administrative Tools, Open Computer Management.
2. In the console tree, click the Local Users and Groups node.
3. In the details pane, double-click the Groups folder.
4. Double-click Remote Desktop Users, and then click
Add.
5. In the Select Users dialog box, click Locations to specify the search location.
6. Click Object Types to specify the types of objects you want to search for.
7. Type the name you want to add in the Enter the object names to select (examples) box.
8. Click Check Names.
When the name is located, click OK.
More information:
Remote Desktop disconnected or can’t connect to remote computer or to Remote Desktop server (Terminal Server) that is running Windows Server 2008 R2
http://support.microsoft.com/kb/2477176/en-us
Hope it helps!
Thanks,
Dharmesh

I am trying to open a service request and the site does not work.

I am trying to open a service request and the site does not work with ANY browser. I get the page https://getsupport.apple.com/GetParts.action which says "Send in for service. We just need a little more information." The continue button does not work. I've seen this problem before trying to file support requests. It's as if Apple simply does not want you to create requests.

I just went through several screens and had no problems. Try clearing your browser's cache and/or history.

Newbie: Flash tried to play a live or recorded stream that does not exist.

Similar Messages

Maybe you are looking for