NEWBIE: Help needed - Eclipse freeze after starting WLS 9.2

Hi All,
I'm very new in development with wls 9.2 and eclipse.
I'm trying to create a simple application (an EAR with a Session Bean).
When I start the WLS inside Eclipse (debug or run mode), this one, after a few seconds or clicks, freeze with 99%CPU usage.
Thanks in advance for help.... it's urgent....
Eclipse 3.3.0
WLST 1.1.0
WLS 9.2
Edited by mtode at 10/07/2007 2:04 AM
Edited by mtode at 10/07/2007 2:05 AM

If I understand you correctly, Eclipse stops responding after a while.
This may not be actually related to starting WLS. It sounds a bit like
you might be having a memory problem. Could you specify your operating
system, the amount of physical memory and the contents of your
eclipse.ini file?
Thanks,
- Konstantin

Similar Messages

Help! Lightroom freezes after installing.

I get this message after trying to create or open a catalog: "An error occured when attemting to change modules." Then Lightroom freezes.
I work on a Mac and have formatted and reinstalled my systemdisk with a qlean install. I had Lightroom installed and have used it for some years. But when installing the programs again I went for the Creative Cloud solution. When I tried to open my previous catalog I got this error message. And after several deinstallings and reinstallings I still get the same message and Lightroom freezes.
Anyone who can help?

Hi Ian.
Thank you for answering. But I find no such file in Preferences. I think Lightroom freezes before making the preference file. Other solutions?
Best wishes,
Magne
6. okt. 2012 kl. 11:43 skrev Ian Lyons <[email protected]>:
Re: Help! Lightroom freezes after installing.
created by Ian Lyons in Photoshop Lightroom - View the full discussion
Have you tried trashing the Lr preference file? More details of location at http://forums.adobe.com/thread/358041?tstart=0
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4753899#4753899
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4753899#4753899
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4753899#4753899. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Lightroom by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

G4 running OS 10.5.4 freezes after start-up

My G4 is running Mac OS 10.5.4. It started frequently freezing after restart many months ago. I have to hard restart a few times and then it will eventually work, or, I can start-up in safe mode and then restart and it will work just fine. Once we are up and running there are no problems. I cannot link this problem to any new downloads or programs. I thought it might be hard drive failure and replaced the hard drive on the machine, but I still have a problem.
Any ideas on how to fix this?

Welcome!
Can you be more specific about which G4 you have? There are a number of variants that can have different hardware issues. These two Apple tech documents are helpful in determining the exact model:
G4 Minitowers prior to Jan 2002
G4 Minitowers since Jan 2002
As you are running Leopard, I assume that your processor is at least 867mHz.
Was the computer stable prior to installing Leopard?
Did you use Leopard retail install disks?
Do you have enough RAM? How about free space on the hard drive? Free space should be at least 15 percent, more if you have limited RAM. %12MB RAM is about the minimum I'd try for runnign Lepoard.
When it freezes, do you get a bunch of cryptic writing on the screen or does it lock up with no information showing on-screen?
If the problems showed up after an incremental update (example: applying the 10.5.1 to 10.5.2 update), sometimes repairing permission on your boot volume can help.
Do you have any third-party PCI cards installed? What video card do you have?
I know this is a lot to digest, but is a start on the troubleshooting process.
Allan

After Installing ox lion, mac pro freezes after start up

so... just like the title says. after installing ox lion on my macbook pro ( i have snow leopard before. 4g memory), sometimes it freezes right after start up, and I could not click on anything, and i had to force it to shut down by holding the power button.
I don't know if anybody else have the same problem or not? is it a bug or something? hope it can be solved soon.....
Also, I have installed all the updates so far...

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode.)

After installing ox lion macbook freezes after start up

so... just like the title says. after installing ox lion on my macbook pro, sometimes it freezes right after start up, and I could not click on anything, and i had to force it to shut down by holding the power button.
I don't know if anybody else have the same problem or not? is it a bug or something? hope it can be solved soon.....

I just don't know if this is showing some sort of problem..
If your Mac boots to the Desktop without freezing, nothing to worry about. The screen color may vary somewhat betweeen one Mac OS X to another.
This can help startup issues also.
Disable the Lion "resume" feature ...
Open System Preferences > General
Deselect: Restore windows when quitting and re-opening apps
edited by: cs

Arrow freezes after starting

I have an old iMac G4 (flat panel) with MAC OS9. When I try to start it, the arrow freezes immediately after starting. What can I do ? Thanks for your answer

There are several things which may contribute to
this symptom; corruption on the startup drive's
sectors which have that data on them necessary
for the computer to boot, is one of them.
Some ideas and links to support documents may
be available here in Apple Support Mac OS 9:
http://www.apple.com/support/macos9/
Too full a hard disk drive, can cause problems;
in that the system can become overwritten or
corrupted by too many files and not enough free
space on the hard disk drive for the OS to work.
Have you tried starting the computer from the OS
installer disc to see if you can boot it at all? This
should be accomplished by inserting the 9.x OS
bootable installer CD into the optical drive tray,
and attempting to restart or start. There is a
utility on the installer disc which may help fix
the hard disk drive. Or if you have a bootable
third-party disk utility for OS 9.2.2 or earlier,
that may be an option instead of the system disc.
This may not be an easy task; the disc may
not wish to be inserted into the computer.
You may also try various keyboard commands
to try and make the computer start up; and if
there is no damage to the hard disk drive, or
the startup volume, it may work. Some are in
the following links; and of those, a few are for
Mac OS 9.x and earlier. Others are for OS X.
Magical Macintosh Keyboard Sequences:
http://davespicks.com/writing/programming/mackeys.html
Where to find Mac keyboard shortcuts - urlfan:
http://www.urlfan.com/local/whereto_find_mac_keyboardshortcuts/68261981.html
Things such as resetting the PRAM or NVRAM
could be of usefulness; depending on the cause
of the issues your computer has going on inside.
You can try to start with extensions disabled
in OS 9.2.2 & earlier (to a point) by holding the
Shift key down on startup. If that works, then
you know there is a problem with those files
known as extensions. An extension manager
is a helpful thing in a pure OS 9.2 system. I
used many utilities and tools in my pre-X days.
Good luck & happy computing!
edited.

Freezing , freeze after start-up

I have just had a new logic board fitted, the machine is now chimeing and starting up on every power-up but the OS has error's and the computer freezes after reaching as far as displaying desktop items or sometimes before.
I have tried:-
Booting from disks, computer freezes before it starts to install data or does not display my partioned hard drive in the destination window.
Target mode and re-installing 10.4 in archive and install mode.
could this be a faulty hard drive ? it has had approx 7000 hours use.
would it be a hard drive issue if it is still accessable from Target mode ?
Matt.

DaddyPaycheck-
I took it to the repair centre today and it booted up first time and did again. So I brought it home and first start a freeze. After 4 or so freezes I tried another instalation of 10.3.9 disks, (the orginal boot up discs the machine came with) that worked fine and did so through software update untill i installed 10.4 from dvd and then ran software update , de-selected the 10.4.9 and installed just the Java 1.3 and 1.4 updates - for better functionality within 10.4 - restarted from software update and the machine has frozen everytime.
It's time to take it back again tomorrow morning I am so peeved with the machine.
Matt Condon1

Satellite 1400-104 freezes after starting main softwarepackage

Hi,
It concerns a Toshiba Satellite 1400-103 (512 MB memory). On booting the Satellite works fine, no problems with surfin or mailing, but when I start a main softwarepackage (like MS Word of Excel, or Macromedia Dreamweaver), the PC freezes after one or two minutes.
I have the impression that the fan suddenly starts turning and the computer freezes. The only thing I can do is shut down by holding the startbutton about 10 seconds, and restart.
I already reinstalled Windows XP, but after two weeks the same problem occurs. My Antivirusprogramm works fine and I check every week on spyware and malware.
Does someone have a clue about this problem?
Thanks

Hello
Like you can see it happens just if the some complex applications started and in the moment where the processor must run with very high speed. In this moment the processor produce a lot of warmness and it must be cooled properly. If the processor temperature is too high the unit will be shut down or freezes because of protecting the processor.
In my opinion the unit should be cleaned from dust and after that the processor can be cooled properly.

Newbie - Help needed starting with Threads

Hi Friends,
I have a class which extends thread and all it does is displays its name and then goes to sleep. So, I have this in my run method:
public void run() {
        System.out.println("Name: "+name);
        try{
             Thread.sleep(1000);
        }catch(Exception e){
          e.printStackTrace();
    }Now I have a tester class which created objects of these class and they should keep running until the user explicitly stops the program. So, I have this in my tester class:
Thread one = new MyClass("one");
Thread one = new MyClass("two");
one.start();
two.start();They run fine for one time but how can i make them run continously?? Any help will be appreciated.
Thanks

Micks80 wrote:
I tried to add that while loop but it throws IllegalStateException because I guess you cannot call the start method more then once...
So any other ways to accomplish this???As suggested in reply #1 put the while loop inside the run method of the Runnable.
Also it is better for MyClass to implement Runnable rather than extending Thread. It is always better to implement Runnable than extend Thread.

Please Help! - MBP freezing after EFI 2.2 firmware update

Hey guys. I'm hoping someone understands whats happening with my 2011 13" MBP (corei5, 4gb ram, 750 gig HDD)
I updated the computer with EFI Firmware 2.2 and the most recent security update a few days ago.
My computer will boot to my username fine.
It immediately begins INDEXING (***!?) even though that obviously isn't needed.
My HDD spins like crazy and I notice in activity monitor 3 things: Finder and MDWorker will user over 100% of my CPU, my RAM is completely used down to 3MB free, and my hard drive free space is going down slowly as i leave the computer on.
Nothing will open, constant beach balls, the longer I leave the comp on the worse it gets.
My fans will run on high to cool down the computer which is obviously working very hard.
I have tried re-installing EFI 2.2 (didn't work), I have tried going back to 2.1 but Lion says its not compatible.
I have re-set the PRAM, no luck.
I have repaired disk permissions, no luck.
The Guest account boots up fine
The HDD is fine because it boots up in the same time as always and runs guest account fine, and my account for the first minute or two fine.
Does anyone know WHAT IS GOING ON HERE? It's driving me nuts. Thanks for your help in advance.
Dan

My 2011 17" MacBook Pro was freezing up to 20 or more times a day after I installed the 2.2 firmware. I created a new user account and even new partitions with 10.6.8 and 10.7.1 installed and they all would freeze with no other software installed. I reset the SMC and PRAM. Repaired the permissions and disk. Nothing helped.
Today I took it to the local Apple store (100 miles away lol) and of course they couldn't reproduce the problem in the limited time they had but they gave me a new machine so I can get back to work. I'm still restoring from a backup so I have no idea how it will run but so far it's behaving and it is running from a CCC version of the drive that was in my old laptop and it has been solid.
The lesson I learned is that I am going to update to 2.1 and skip the 2.2 firmware.
BTW - Props to Alex @ the Apple store for all his help.

Adobe Media Encoder CS6: Freezes after starting encoding process

Adobe Media Encoder CS6: When trying to export media I Click on the Queue tab. I then click the Start button. The program shows the first few frames in the review window and then freezes with no error codes or any other notifications. Clicking on the S
I am running Adobe Media Encoder CS66.0.3.1 on Win7 64 with Intel i7-4770K CPU 16 GB Ram.
The source file is 1920 X 1080 29.97 fps. Output file is H.264 Android Tablet 1080 P 29.97 fps
I do not see any indication what so ever of what is going wrong. I have uninstalled the program completely and re installed it with no effect.
Need some help!

Can you export directly from Premiere Pro?
Have you tried disabling GPU acceleration?

APPLE PLEASE HELP! Mail hangs after start, address book never launches!

I've been reviewing postings since friday last week about issues with mail/address book after 10.5.2 and here's a summary:
• Symptom 1: Mail launches slow
• symptom 2: mail hangs while downloading new mail (in my case from 1 particular account according to the activity viewer, while downloading the last, most recent msg, the msg does not have attachments but it stays downloading forever, force quit required)
• symptom 3: mail does not send msgs (in my case it sends one-by-one after each force quit/relaunch)
• symptom 4: duplicate msgs appear, particularly msgs received after 10.5.2
• symptom 5: mail does not quit,, force quit necessary. in my case after i force quit/ relaunch several times mail launches somewhat "normal" but after a reboot or relaunch, problems appear again. (duplicates never go away)
• issues with mail after 10.5.2 are not ISP/email host related, we all have different ISPs and hosts and we all have the same symptoms.
• i also experienced problems with address book, it starts but the window never opens or if it does is completely empty, no functions are possible. this also affected ichat as the info for the contacts cant be retrieved from address book.
thanks for reading and please contribute to the thread if you agree with the summary, APPLE NEEDS TO HELP US!!!

Hi everybody,
I have received an update from my friend who suffered from the Mail problem. In fact, the errors occurring AFTER the restore from Time Machine were due to an ISP's problem. So the restore really worked after all.
So to put it in a nutshell, I would recommend the following process:
1. Quit (or force-quit iff necessary) Mail asap when the application gets stuck. Do not open Mail again.
2. Restore ~/Library/Mail folder from the youngest Time Machine Backup you know Mail was behaving properly.
3. Run the 10.5.2 Combo Updater while all applications are shut down (just to be on the safe side).
4. After the inevitable Restart, check Software Update for more updates and install if necessary.
5. Run Mail and let it rebuild all the Mailboxes.
This should work fine to solve the problem. With the AddressBook case, I should try a similar workflow to get it fixed, yet I haven't tried that one so far.
BTW: I can only encourage you to really get an external drive and use Time Machine frequently. Even if it seems to be expensive in the first place, imho TM is the best piece of software Apple has been inventing for ages. In my case, I also tried to save money and took a leftover 40 gig HD from an old server and got myself a usb-2.0 external box for around 10 euros. Although space is limited, i have been backing up hourly since 1 February and there's still 12 gig to go. I only back um my home directory, as all my personal data, settings and mail are stored there.

HELP: Illustrator quits suddenly after start up (CS2)

I just got a new computer and I'm trying to get Illustrator and the rest of the CS2 suite installed. I uninstalled CS2 off of my old computer to free the license, that went fine. Installation on my new computer went smoothly. However, when I try to start Illustrator it quits out with no error message after it finishes loading the start up info.
I've been getting problems with the rest of my CS2 suite also. Photoshop gives me an error saying my user name, organization, or serial number is invalid. Before it will start, InDesign wants me to 'personalize my software' and type in my serial number, which it then tells me is invalid.
It sounds like my license is still being read as in use by my old computer, but it should have been cleared. What do I do?
My system -
Creative Suite 2.3 Premium (all updates installes)
Windows XP x64
4gb ram
Intel Core 2 quad Q6600
nVidia GeForce 9800 GTX

I have a similar problem and need help. I download the trial version of Illustrator CS3 and at software startup screen I check the 30 day trial. It comes up fine and i use for a few days. now i bring up Illustrator and at the software startup screen it says 27 days remaining of trial and i select activate later button and now it doesn't come up it just quits with no error messages. can anyone provide some help? I tried uninstalling and downloading again and new install, but same problem. fYI...I have Photoshop cS3 and dreamweaver trial versions and no problems
I am running:
Windows XP , SP2
Intel Core 2 CPU
2.0 GB RAM; 2.13 Ghz
NVIDIA GeForce 7300 LE

Photoshop freezes after starting with white window

when I start Photoshop I see this after a few seconds. PS is then not responding and I have to force quit it.
One time I could see the window as "Participate to improve" but I couldn't click in it as PS freezes again.
Mac OSX Mountain Lion with all updates, freshly installed 2 days ago. Photoshop was installed two times by now. I already deleted the preferences to check if that helps, but same happen again. To be sure that it is not one of the custom brushes I re installed PS.
How can I get rid of the window or how can I solve this problem?
Thank you all

Hi Bonepenonline,
Please open Photoshop on root account and check whether its working there.
New user account: http://support.apple.com/kb/ht1528
Regards,
Romit Sinha

InDesign and Illustrator CC freeze after start up. The rest of the apps work fine.

After installing CC on my Mac Book Pro, InDesign and Illustrator CC make freeze.
I need to restart with the start-up button.
Any suggestions?

eh, it should be: "…make my Macbook freeze."

NEWBIE: Help needed - Eclipse freeze after starting WLS 9.2

Similar Messages

Maybe you are looking for