Newbie help with basic setup - WRK54G

=== Linksys WRK54G v2 router
=== WinXP Pro SP3
I am not a networking person, and I need help setting up my router. I bought it new a bit over a year ago and installed it successfully, but it kept hosing up my connection so I took it off line and put it up. My wife now has a laptop and so I want to try this router again. It's powered on and connected to my DSL and my laptop, which is my main computer.
Power light: ON
WLAN light: ON
1 light: ON
Internet light: ON
I have the CD's software on my hard drive and tried setting things up with the EasyLink_Connect.exe, PCConnect.exe, and even did the ELADownloadInstaller.exe, which downloaded some other installer (EasyLink Advisor?). None of them worked. They crapped out at the point where it detects the router and read cannot detect router.
I read in the PDF manual that the router settings can be reset to defaults and so I did and tried again. No joy. I also tried unplugging too without results.
So, what do I do now to get this thing working?
Help is much appreciated.

If you face any further problems you should try this -
Hard reset your router and then re-configure it...
Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
If your Internet Service Providor is Cable follow this link
If your Internet Service Providor is DSL follow this link

Similar Messages

Help With My Setup...

I Hope I'm in the right forum, If not let me know where this post should go.
Thanks for helping me out. I have some questions regarding my setup and acquiring new gear. Currently, I have a the following setup:
IMac - newer model
Logic Pro 9
Numark tt-usb turntable
Stanton DJ mixer
Pair of Yamaha HS80 monitors
MPD 24
I would like to add a keyboard controller (I'm thinking of the new Korg Microsampler). Basically, I'm willing to get the microsampler as long as it can Fully function like a controller, which can control logic synths & plug-ins(axiom, mpk, etc.) and as well as it's own features. Furthermore, I would like to to be able to record from my turntable to logic and into the microsampler. I understand I would need an interface. Would I still need the mixer? Would the M-Audio Firewire Solo work with my setup?
Would a control surface take place of an Interface?
I am possibly interested in getting a control surface that works good within logic. I was looking at the Euphonix MC Control, it seems to work great with logic. Is there an cheaper alternative? Also, I would like it to be user friendly, I am new to this.
Essentially, I want everything to work simple & smoothly. I like to make sample based music from records. Can you give me a rundown of the necessary items I'm going to need...cables, interface, etc.
Sorry, if I'm rambling just want to be clear.
I appreciate your time....

I use a Alesis multimix FW and a presonus inspire.
I would guess that you should always get dry sound from any output with firewire plugged in or not. My inspire uses a software control panel to route signal and the Multimix is all hardware. I have no clue how to route signal with the firebox but it has to be one or the other. Presonus is pretty good with updates and bug fixes did you check for new drivers?

Need some help with guitar setup...

jeez, never thought i'd be asking a question like this after playing for like 20 years, but i need some help with a guitar setup for mac. i'm gonna list out a lot of crap here that prolly doesn't affect anything at all, but here goes.
Imac 17inch G4 - latest updated OS X... 10.4, or 5, or whatever. garageband 3.0
digitech gnx-3
alesis sr-16
sure mic's
yamaha e203 keyboard
here's the setup:
yamaha is on its own on a usb uno midi interface, sure's connected to gnx's xlr port, alesis connected to gnx's jam-a-long input, '87 kramer vanguard connected to gnx's guitar input. currently running headphones out on gnx to line in on mac.
here's the problem:
everything works beautifully, but my guitar sounds like crap. if i plug headphones into the gnx, it sounds beautiful. that makes me think its some kind of level issue between the gnx's output, and the mac's input, but nothing seems to fix it.
by sounding like crap, i mean way too much bass. sound is muddy, blurry, not crisp... aka crap. i've tried altering both output and input on mac and gnx, and i cant get a combination that works. the gnx has a s/pdif out, can the mac accept that as input? might that help? short of running the gnx to my marshal half stack and mic'ing that, anyone have any suggestions, or use a similar setup?
any help would be greatly appreciated!

anyone? ... any suggestions? I think it might be an issue with the gnx pre-amping the signal as it goes out, and then the mac amping it on the way in, giving me a buttload more signal than i need, but since i cant find a happy level, i'm not really sure. i really dont want to resort to mic'ing my marshall... even with the volume almost off, my jcm900 is WAY too loud for apartment use. its not like i really NEED the guitar to sound perfect, i only use garageband to sketch out ideas for songs between myself and bandmates, but its really annoying to not have my customary crisp distortion. my bass player keeps telling me to use the built in amps, but, not to dis a practically free program, but the built in amps blow, at least after 10 years of marshall tube amplification they do. if anyone has any suggestions that might be helpfull on how i might resolve this, i would be your best friend for life and go to all your birthday parties

Need help with Printer Setup conventions

I can't get my Brother printer to print from one computer--but it prints okay from the other computer on my network. I need to know the conventions for the Printer Setup Utility.
There's a checkbox by every printer on the list. What does it mean when the checkbox is grayed out?
Some printer names appear in bold. What does that mean?
Thanx.

Thank you for your reply. I appreciate your help in this and just want to understand what you're saying.
As I say, the printer is displayed in the print dialog box but the checkbox is grayed out. I'm assuming that when you say "...it can't find/see them now," you mean the print dialogue can't see them (the drivers). Your last sentence confuses me. You say, "Do you maybe have Printer Sharing enabled & they aren't actually directly connected? If so you have to reboot after turning it off." A little confusion about your antecedents here. What isn't actually connected? The printer? So I have to reboot after turning it off, "it" I suppose is the printer, is that right? I will try that. So turn printer off, reboot, turn printer on. Right?
I will describe my problem. l thought that if I understood why the checkbox was grayed out I might see what my problem was. If you want me to start another topic I can do that.
Problem: I have a network with 2 computers and the Brother
multifunction fax/printer. I'm using an Apple airport hub. The printer
and one computer (Mac tower) are connected to the airport base via
ethernet. The 2nd computer (Apple laptop) is on the wireless network.
Until recently i could print from both computers. Now I can't print from
the tower. But I can still print from the laptop.
When I try to print from the tower I get an error message that says, "Cannot print from current printer." I have rebooted, reinstalled printer drivers, checked cables, deleted printer from printer list and re-added printer all to no avail. But as I say, I can still print from the laptop which is using Airport. So the printer prints, the hub connects to the printer okay (ethernet) and I know the tower connects to the hub (I can ping the printer okay from the tower.)
I am conversing to Brother support via email and their first suggestions I have already tried. Perhaps there's some problem in the network, but I can't figure it out. Worse yet, now when I go to the Network preferences I get an error message which says, "Your network settings have been changed by another application." THIS ERROR MESSAGE WON'T GO AWAY! I can click 'okay' but it reappears. I have to force quit the System Preferences to get out. If you can help with any of these problems I surely appreciate it.

Newbie - Help With templates

I am fairly new to dreamweaver. Looking to put together a
basic site for a holiday home for rent. Would like to include
photos of the house and surrounding area, travel details, details
of things to do and see, calendar, temeperature charts etc. Can
anyone suggest where I can get my hands on templates that would
help with this?
Many thanks

The best I've seen are from ProjectSeven -
http://www.projectseven.com/
They are commercial (look at the Page Packs) and they are
excellent.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Gusley5" <[email protected]> wrote in
message
news:[email protected]...
>I guess sources for templates is what I'm looking for.
I've little
>knowledge
> of writing code so was looking for a draft template
which would have a
> professional look to it with regard to font, layout,
colours, buttons to
> use
> for links etc. I suppose some sort of table layout for
including photos
> with
> related text may be best place to start.
>
> Code below is from a starter page available from
dreamweaver. Any other
> suggestions for templates gratefully received.
>
> Thanks
>
> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN"
> "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
> <html xmlns="
http://www.w3.org/1999/xhtml">
> 
> <head>
> 
> <title>Lodging - Catalog</title>
> <meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1" />
> <link rel="stylesheet"
>
href="file:///C|/Program%20Files/Macromedia/Dreamweaver%208/Configuration/BuiltI
> n/StarterPages/mm_lodging1.css" type="text/css" />
> </head>
> <body bgcolor="#999966">
> <table width="100%" border="0" cellspacing="0"
cellpadding="0">
> <tr>
> <td width="15"
nowrap="nowrap"> </td>
> <td height="60" colspan="2" class="logo"
nowrap="nowrap"><br />
> WEBSITE NAME HERE</td>
> <td width="100%"> </td>
> </tr>
>
> <tr bgcolor="#ffffff">
> <td colspan="4"><img
>
src="file:///C|/Program%20Files/Macromedia/Dreamweaver%208/Configuration/BuiltIn
> /StarterPages/mm_spacer.gif" alt="" width="1" height="1"
border="0"
> /></td>
> </tr>
>
> <tr bgcolor="#a4c2c2">
> <td width="15"
nowrap="nowrap"> </td>
> <td height="36" id="navigation"
class="navText"><a
> href="javascript:;">HOME</a></td>
> <td> </td>
> <td width="100%"> </td>
> </tr>
>
> <tr bgcolor="#ffffff">
> <td colspan="4"><img
>
src="file:///C|/Program%20Files/Macromedia/Dreamweaver%208/Configuration/BuiltIn
> /StarterPages/mm_spacer.gif" alt="" width="1" height="1"
border="0"
> /></td>
> </tr>
>
> <tr bgcolor="#ffffff">
> <td valign="top" width="15"><img
>
src="file:///C|/Program%20Files/Macromedia/Dreamweaver%208/Configuration/BuiltIn
> /StarterPages/mm_spacer.gif" alt="" width="15"
height="1" border="0"
> /></td>
> <td valign="top" width="35"><img
>
src="file:///C|/Program%20Files/Macromedia/Dreamweaver%208/Configuration/BuiltIn
> /StarterPages/mm_spacer.gif" alt="" width="35"
height="1" border="0"
> /></td>
> <td width="710" valign="top"><br />
> <table border="0" cellspacing="0" cellpadding="2"
width="610">
> <tr>
> <td colspan="7" class="pageName">Page Name
Here</td>
> </tr>
> <tr>
> <td width="22%" height="110"><img
>
src="file:///C|/Program%20Files/Macromedia/Dreamweaver%208/Configuration/BuiltIn
> /StarterPages/mm_product_sm.gif" alt="small product
photo" width="110"
> height="110" border="0" /></td>
> <td> </td>
> <td width="22%" height="110"><img
>
src="file:///C|/Program%20Files/Macromedia/Dreamweaver%208/Configuration/BuiltIn
> /StarterPages/mm_product_sm.gif" alt="small product
photo" width="110"
> height="110" border="0" /></td>
> <td> </td>
> <td width="22%" height="110"><img
>
src="file:///C|/Program%20Files/Macromedia/Dreamweaver%208/Configuration/BuiltIn
> /StarterPages/mm_product_sm.gif" alt="small product
photo" width="110"
> height="110" border="0" /></td>
> <td> </td>
> <td width="22%" height="110"><img
>
src="file:///C|/Program%20Files/Macromedia/Dreamweaver%208/Configuration/BuiltIn
> /StarterPages/mm_product_sm.gif" alt="small product
photo" width="110"
> height="110" border="0" /></td>
> </tr>
> <tr>
> <td valign="top" class="calendarText"
nowrap="nowrap"><a
> href="javascript:;">Product Name</a><br
/>
> Price: $0.00</td>
> <td> </td>
> <td valign="top" class="calendarText"
nowrap="nowrap"><a
> href="javascript:;">Product Name</a><br
/>
> Price: $0.00</td>
> <td> </td>
> <td valign="top" class="calendarText"
nowrap="nowrap"><a
> href="javascript:;">Product Name</a><br
/>
> Price: $0.00</td>
> <td> </td>
> <td valign="top" class="calendarText"
nowrap="nowrap"><a
> href="javascript:;">Product Name</a><br
/>
> Price: $0.00</td>
> </tr>
> <tr>
> <td colspan="7"> </td>
> </tr>
> <tr>
> <td height="110"><img
>
src="file:///C|/Program%20Files/Macromedia/Dreamweaver%208/Configuration/BuiltIn
> /StarterPages/mm_product_sm.gif" alt="small product
photo" width="110"
> height="110" border="0" /></td>
> <td> </td>
> <td height="110"><img
>
src="file:///C|/Program%20Files/Macromedia/Dreamweaver%208/Configuration/BuiltIn
> /StarterPages/mm_product_sm.gif" alt="small product
photo" width="110"
> height="110" border="0" /></td>
> <td> </td>
> <td height="110"><img
>
src="file:///C|/Program%20Files/Macromedia/Dreamweaver%208/Configuration/BuiltIn
> /StarterPages/mm_product_sm.gif" alt="small product
photo" width="110"
> height="110" border="0" /></td>
> <td> </td>
> <td height="110"><img
>
src="file:///C|/Program%20Files/Macromedia/Dreamweaver%208/Configuration/BuiltIn
> /StarterPages/mm_product_sm.gif" alt="small product
photo" width="110"
> height="110" border="0" /></td>
> </tr>
> <tr>
> <td valign="top" class="calendarText"
nowrap="nowrap"><a
> href="javascript:;">Product Name</a><br
/>
> Price: $0.00</td>
> <td> </td>
> <td valign="top" class="calendarText"
nowrap="nowrap"><a
> href="javascript:;">Product Name</a><br
/>
> Price: $0.00</td>
> <td> </td>
> <td valign="top" class="calendarText"
nowrap="nowrap"><a
> href="javascript:;">Product Name</a><br
/>
> Price: $0.00</td>
> <td> </td>
> <td valign="top" class="calendarText"
nowrap="nowrap"><a
> href="javascript:;">Product Name</a><br
/>
> Price: $0.00</td>
> </tr>
> <tr>
> <td colspan="7"> </td>
> </tr>
> </table> </td>
> <td> </td>
> </tr>
>
> <tr>
> <td width="15"> </td>
> <td width="35"> </td>
> <td width="710"> </td>
> <td width="100%"> </td>
> </tr>
> </table>
> </body>
> </html>
>

Newbie - Help with Fireworks CS5 nav bar

I am new to Fireworks. I am using Fireworks CS5. I need help with creating navigation bars and menu. Any tutorial or tips is greatly appreciated.
Thank you.

You'll find a tutorial named "Create a basic navigation bar" in the Fireworks help files.

Newbie - help with homework.

Create a procedure to insert a record into the Bill_Items table. All the fields in the Bill_Items table will be specified as para with the exception of the Selling_Price, which will be the Current_Price, retrieved from the Menu_Items table. Do not allow the insert to finish unless there are enough of all ingredients on hand. If the insert is successfull, the quantity field in the Ingredient table will need to be updated accordingly.
Tables are below.
Thanks,
CREATE TABLE Bill_Items
Bill_Number NUMBER(6,0)
CONSTRAINT FK_Bill_Items_Bill_Number REFERENCES Bills(Bill_Number)
CONSTRAINT NN_Bill_Items_Bill_Number NOT NULL,
Menu_Item_Number NUMBER(5,0)
CONSTRAINT FK_Menu_Item_Num REFERENCES Menu_Items(Menu_Item_Number)
CONSTRAINT NN_Bill_Items_Menu_Item_Num NOT NULL,
Discount NUMBER(5,2)
CONSTRAINT N_Bill_Items_Discount NULL,
Quantity NUMBER(3,0) DEFAULT 1
CONSTRAINT Bills_Items_Quanity_CC CHECK(Quantity > 0)
CONSTRAINT NN_Bill_Items_Quantity NOT NULL,
Selling_Price NUMBER(6,2) DEFAULT 0
CONSTRAINT Bills_Items_SellingPrice_CC CHECK(Selling_Price >= 0)
CONSTRAINT NN_Bill_Items_Selling_Price NOT NULL,
CONSTRAINT PK_Bill_Items PRIMARY KEY(Bill_Number,Menu_Item_Number)
CREATE TABLE Menu_Item_Ingredients
Menu_Item_Number NUMBER(5,0)
CONSTRAINT FK_Menu_Item_Ing_Menu_Item_Num REFERENCES Menu_Items(Menu_Item_Number)
CONSTRAINT NN_Menu_Item_Ing_Meun_Item_Num NOT NULL,
Ingredient_Number NUMBER(5,0)
CONSTRAINT FK_Menu_Item_Ing_IngredientNo REFERENCES Ingredients(Ingredient_Number)
CONSTRAINT NN_Menu_Item_Ing_IngredientNo NOT NULL,
Quantity NUMBER(5,2) DEFAULT 1
CONSTRAINT Menu_Item_Ing_Quanity_CC CHECK(Quantity > 0)
CONSTRAINT NN_Menu_Item_Ing_Quanity NOT NULL,
Constraint PK_Menu_Item_Ing PRIMARY KEY(Menu_Item_Number, Ingredient_Number)
CREATE TABLE Ingredients
Ingredient_Number Number(5,0)
CONSTRAINT PK_Ingredients_IngredientNo PRIMARY KEY
CONSTRAINT NN_Ingredients_IngredientNo NOT NULL,
Ingredient_Name VarChar2(35)
CONSTRAINT NN_Ingredients_Ingredient_Name NOT NULL,
Portion_Code CHAR(2)
CONSTRAINT FK_Ingredients_PortionCode REFERENCES Portions(Portion_Code)
CONSTRAINT NN_Ingredients_PortionCode NOT NULL
REFERENCES Portions(Portion_Code),
On_Hand NUMBER(6,2) DEFAULT 1
CONSTRAINT Ingredients_OnHand_CC CHECK(On_Hand > 0)
CONSTRAINT NN_Ingredients_On_Hand NOT NULL,
Reorder_Point NUMBER(6,2) DEFAULT 1
CONSTRAINT Ingredients_Reorder_Point CHECK(Reorder_Point > 0)
CONSTRAINT NN_Ingredients_Reorder_Point NOT NULL,
Current_Cost NUMBER(5,2) DEFAULT 0
CONSTRAINT Ingredients_CurrentCost_CC CHECK(Current_Cost >= 0)
CONSTRAINT NN_Ingredients_Current_Cost NOT NULL
CREATE TABLE Menu_Items
Menu_Item_Number NUMBER(5,0)
CONSTRAINT PK_Menu_Items_MenuItemsNo PRIMARY KEY
CONSTRAINT NN_Menu_Items_MenuItemsNo NOT NULL,
Menu_Item_Name VARCHAR2(50)
CONSTRAINT NN_Menu_Items_Menu_Item_Name NOT NULL,
Current_Price NUMBER(6,2) DEFAULT 0
CONSTRAINT Menu_Items_CurrentPrice CHECK(Current_Price >=0)
CONSTRAINT NN_Menu_Items_Current_Price NOT NULL,
Production_Cost NUMBER(6,2) DEFAULT 0
CONSTRAINT Menu_Items_ProdCost CHECK(Production_Cost >=0)
CONSTRAINT NN_Menu_Items_Production_Cost NOT NULL
);

Newbie to oracle - help with homework.. Letting others do your work is called cheating, where I live.
C.

Help with router setup

Hi I need help with my new infinity setup

seanyg wrote:
Hi I need help with my new infinity setup
Surely the openreach engineer did most of it, the rest as said is just plug and play.
(If I have helped you in any way to say "Thank You" please click on the star next to the message. Thank You)
If I have solved your Issue please click the "Mark as accepted solution" button.

Problems with basic setup

hello, yesterday I have bought a wireless-G Broadband Router (WRT54G).
I think I have connect everything fine. But when I open the basic setup (http://192.168.1.1/) and I give my password I get this: http://users.skynet.be/fa853774/test/netwerk.JPG .
I don't see everything ( the buttons at the top and on the left side,... ).
Can somebody tell me what's going on and what I can do?

hi !
U will need to reset the router for 3 min while the router is powered on ...if possible u can also upgrade the firmware for the router .. U can upgarde the firmware through tftp.exe while u can find the TFTP.exe on the following link
:- ftp://ftp.linksys.com/pub/network/
Network Security Administrator (EC Council)
linksysfirmwares.googlepages.com/

Newbie: help with join in a select query

Hi: I need some help with creating a select statement.
I have two tables t1 (fields: id, time, cost, t2id) and t2 (fields: id, time, cost). t2id from t1 is the primary key in t2. I want a single select statement to list all time and cost from both t1 and t2. I think I need to use join but can't seem to figure it out even after going through some tutorials.
Thanks in advance.
Ray

t1 has following records
pkid, time, cost,product
1,123456,34,801
2,123457,20,802
3,345678,40,801
t2 has the following records
id,productid,time,cost
1,801,4356789,12
2,801,4356790,1
3,802,9845679,100
4,801,9345614,12
I want a query that will print following from t1 (time and cost for records that have product=801)
123456,34
345678,40
followed by following from t2 (time and cost for records that have productid=801)
4356789,12
4356790,1
9345614,12
Is this possible?
Thanks
ray

Need help with basic program.....!

I've to write a program that generates a random number, which the user has to try and guess, after each guess they're told whether it's too high or too low etc., I've gotten this far, however, the user has only 10 guesses.... In my program I've used a while loop and the user gets an infinite number of guesses, I know I'm supposed to use a for loop, but can't seem to get it to work properly. Also, when the user guesses the number, the program then has to print out how many guesses it took, and I have no idea how to get it to do this AT ALL!!! I'd really appreciate some help with this, thanks v. much!!!!

I've to write a program that generates a random
number, which the user has to try and guess, after
each guess they're told whether it's too high or too
low etc., I've gotten this far, however, the user has
only 10 guesses.... In my program I've used a while
loop and the user gets an infinite number of guesses,
I know I'm supposed to use a for loop, but can't seem
to get it to work properly. Also, when the user
guesses the number, the program then has to print out
how many guesses it took, and I have no idea how to
get it to do this AT ALL!!! I'd really appreciate some
help with this, thanks v. much!!!!Hey not every book covers every aspect of Java (if you haven't got a book and don't want to buy 1 i recommend an online tutorial) If u want the user to have an infinate number of guesses, use an infinate while loop. Put this in a file called app.java:
import java.applet.Applet;
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class app extends Applet implements ActionListener
     JLabel lbl=new JLabel("Guess a number between 0 and 10:");
     JTextField txtfield=new JTextField(20);
     JButton button=new JButton("Guess...");
     JLabel lbl2=new JLabel();
     int randomnumber=Math.round((float)Math.random()*10);
     public void init()
          add(lbl);
          add(txtfield);
          add(button);
          button.addActionListener(this);
     public void actionPerformed (ActionEvent e)
          String s=new String("");
          s+=randomnumber;
          if (e.getSource().equals(button) && txtfield.getText().equals(s))
               setBackground(Color.white);
               setForeground(Color.black);
               lbl2.setText("Got it!");
               add(lbl2);
               validate();
          else
               setBackground(Color.white);
               setForeground(Color.black);
               if (Integer.parseInt(txtfield.getText())>randomnumber)
               lbl2.setText("Too High!");
               else
               lbl2.setText("Too Low!");
               add(lbl2);
               validate();
Then create a HTML document in the classes folder:
<HTML>
<HEAD>
<TITLE>APPLET</TITLE>
</HEAD>
<BODY>
<HR>
<CENTER>
<APPLET
     CODE=app.class
     WIDTH=400
     HEIGHT=200 >
</APPLET>
</CENTER>
<HR>
</BODY>
</HTML>
It will do what you wish. If you want to have more then 10 numbers to guess, for example 100, do this:
int randomnumber=Math.round((float)Math.random()*100);
Does that answer your question?

I need some basic help with Email setup

Hello, I ve just been connected to infinity and I m trying to setup a few email addresses but the BT yahoo system is confusing me.
I managed to create a new email (sub account) for my wife but I m struggling with finding a way to have a couple more for myself. Do I really need to make a sub account for each email?
The default email has my name and surname in it which is not something I generally use for that purpose, I would only use that one for close friends and family, I would like to setup another one for general use and one for when there is a likelyhood it ll get a lot of spam.
The way to add extra emails is usually very simple (with previous isps) , login to "manage my account" and choose username and password then enter the details in outlook express.
With BT I m having to deal with the Yahoo thingy, which does a lot of more than just emails but at this time I have interest in it at all.
1 - I would simply like to setup a few emails to use with outlook express, what is the best way to achieve that ?
2 - The yahoo email seems to be part of a network like facebook, as I don t intend to use that side of it I would prefer not to have my personal details associated with a profile that I do not need . It seems to be for public viewing by default.
Can I set up and use my emails without having an online profile for yahoo?
How do i keep my details offline (not publicly viewable in yahoo)?
thanks.

yes!
you get one prime email address. the one you agreed to and the one to set up your bt mail, it was in letter confirming bt set up. (order ref)
for more for yourself, or anybody else, its got to be sub. up to ten for INF2
I have set up 4 sub accounts with different names, etc. but use the same password for all 5 .
I then had them set up with outlook express, there is a bt prog to do this. look on site.
Then I use incredimail as my final mail client, this also has a prog to set up from outlook express.
so all my mail to and from me ends up in incredimail with my 4 sub accounts, using one as my prime.
my bt prime I do not use, as it is my full name.
so far so good, just a bit slow finding its way, like you my previous ISP (tesco) was less complicated, but slow copper wire.
good luck
Ronin22
In the end we will all be star dust.
Then start all over again.

Help with our setup and output to Excel

OK, I work for the EPA Office of Research and Development (ORD) here in Cincinnati. We are working on this big project that is coming to an end. Basically, we have four different carts going. We have one ultra filtration cart (UF), one reservoir cart, one ion-exchange cart, and one RO cart. The UF, reservoir, and RO carts will all be hooked up to the computer via DASYlab.
Currently, we think that we have our DASYlab setup correctly. We want to graph everything over time and we want to export everything out to Excel so the data can be analysed later. I have been in contact with DASYlab help but this really isn't there job. I was wondering if someone could look at our DASYlab file (or give me idiot proof instuctions) into making sure that data is collected once every 2 seconds, the graphs are updated once every 2 seconds, and that the charts that will be output to Excel are updated once every 2 seconds. We are working on a P-M 1.8GHz notebook with a 100GB hard drive and 2GB of RAM so it can definately handle the flow of data.
No one in our project (or TTEB branch) has any experience with DASYlab. The last person to have this type of experience was working with Strawberry Tree back in the early 90's on a old 286 PC via DOS. It was actually the job of the contractors who built our equipment to get everything setup. However, they fell through as they didn't have any previous experience with DASYlab and they just didn't feal like reading through the 100's of pages of text. This assignment was handed over to me just last week and I think I have everything setup correctly. I just don't have to the time to fully read the manual.
I would appreciate any help. If someone can help then feal free to PM me and I can e-mail them the two necessary files.
Thanks

Well I'm still pretty clueless about this, but for anyone who is looking at this and wondering, here's what I've gleaned:
1. After Effects, especially CS6, makes much more and better use of graphics cards than does Premiere Pro. I'm guessing that PP will, in future versions, make better use of them. For now, no need to spend more than a couple hundred bucks on one.
2. Update the software. PP and AE both performed substantially better after installing the .01 update from adobe. After you install the update, be sure to re-do the CUDA hack, if necessary.
3. As it stands, money for a PP system is best spent on a processor, as in the newest Intel (currently Ivy Bridge), and overclocked. This is where performance happens. I'd say on a 2012 system, 16 GB RAM should be considered a minimum for video editing, and 24 or 32 if you can afford it. More than that probably won't be utilized. Hard disks can affect performance, but I don't think it's a bottleneck unless you're doing something that requires VERY fast/large reads and writes (4k source?). Most people who have high-end editing stations also have a bunch of drives in RAID, but if you look at the performance chart, the SECOND highest scoring tester did not use RAID (though did use a presumably fast and large SSD).
Keep in mind that all of this has to do with RENDER speeds. I still don't know what the bottleneck is for PREVIEWS, but I'm just going to assume it's the same.

Help with phpMyAdmin setup.php script

Hi all,
I am a newbie to Arch Linux even though I've been running Linux (-only) for more than a year. I have been mostly running Debian based distributions, so sometimes I feel a bit lost on Arch. So far I have been able to set everything up, from wireless to X server (by just reading the instructions, and some posts in the forum).
Now I am stuck with something that is not so distro-related, I was following this guide (http://wiki.archlinux.org/index.php/LAMP) but I got stuck at the configuration script for phpMyAdmin.
In fact, when I go to the address http://localhost/phpMyAdmin/scripts/setup.php I can only see the PHP code, not the web page.
Now I am sure that Apache is running properly since my php test page runs just fine. So I cannot figure out why the setup.php page does not show correctly.
Could somebody please give me some hints?
Any help is greatly appreciated,
Thanks for your time.

np .. i forgot one point though , you needed to restart the web server so the php module takes the new settings. this is the case fro all config changes to either teh websierver or a modules/addon

100% Noob - Need Help for basic setup of Cisco 2504 and 1600 AP

Hello,
I am completely noob in (cisco) networking.
I have to setup a basic but secure wireless network.
I have a cisco 2504 and 2 APs 1600 + a random switch
I have 4 ports on the controller.
I want to keep the 1st port on the network for the controller management, plug my internet box on the 3rd port, and my switch on the 4th port. Then the AP will be on the switch.
I am able to make something working when everythings are plugged on the switch, plugged in the first port (default management port).But this is not what I want.
First thing, Is that possible ?
1st port : office network
2nd port : empty
3rd port : Internet Box
4th port : Switch + all APs
Then, if that is possible, how should i configure the controller to make that work ? I am completely lost in the menus.
I dont need a perfect configuration, just something simple and working.
1 SSID, 10 DHCP addresses, block wireless users trying to go on the office network.
If anyone could help my doing that, It would be very nice.
Thank you.

You basically need two SSIDs one for corporate users and second for guests .check the link with step by step config and brief details .
http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-vlan/70937-guest-internal-wlan.html

Newbie help with basic setup - WRK54G

Similar Messages

Maybe you are looking for