Newbie - Help with externally served html

I am trying to put together my first iWeb page and include a button from Amazon. As an Affiliate, I got the html from them and tried to place it on my site. Amazon says that the link (graphic) is served by them. Unfortunately, when I publish the site to .Mac all I see is the html text but not the button. Would this change if I published to a folder? Does iWeb have the functionality to do this? (I assume that it does and it is just operator inexperience).
Any help is greatly appreciated.
iBook G4 Mac OS X (10.4.6)

I read the article about placing PayPal buttons on my iWeb page and it was exactly analogous to what I am looking to do with the Amazon button. So...I re-did the site as instructed in the article and uploaded it to .mac. So far so good. Then, as the article said, I tried to open the page through TextEdit and cut and paste the html into the document. Unfortuantely, the html that came up was from the old page. It seems that while the graphics have 'refreshed' the html has not. Of course, I know that if the page now looks they way I want it to the html must be the way that I want it also. After restarting/shutting down the computer, synching a couple of times, and trying anything else I could think of it remains the same. Is there a way to clear the cache? Is there even a cache to clear?
Any ideas on how to get my computer to show the 'real' html through TextEdit? Thanks.

Similar Messages

Help with a flash html inserting into DW

Hello,
I have created a enquiry section in flash for one of my html DW pages for my site. When I publish the flash doc ti creates a html page (Contact.html). When I open the flash html page in DW or upload it to my server, everything works fine. I recieve an email at my prefered destination etc etc. But as its only a section of my contact page of my website i need to insert it into my site page (get_in_touch.html) soon as i try and take all the stuff from contact.html and insert it into a div in my get_in_touch.html it doesn't respond when the submit button is pressed..... Can someone please help!!!!!
Dan

Thanks for all your help. I've managed to sort out the problem, still not
sure what it was.... My sites live now.
Just one question for you if you dont mind.
The page which has the flash on it (yes this one again!) Well if someone
goes to the page with out having flash player installed on their machine,
i'm looking for some script to detect that there computer doesn't have
Flash and redirect them to another html page I've created.
Would really appreciated any advice you may have.
many thanks,
Dan
                                                                                pziecina
             <[email protected]>
To
             09/09/2009 16:40                Daniel Herrington
                                             <[email protected]
                                             m>
                Please respond to                                       cc
             clearspace-571537347-50
             [email protected]                               Subject
                  ums.adobe.com              Help with a
                                             flash html inserting into DW
                                                                                Hi
Somewhere above your tag, you will have a line similar to this - Also in your tag the swf file -
These are the files that I said may be wrong or missing.
However if you just edit the flash generated page and include the items you
require in this, and maintain the same file position, you should have no
problems,
PZ

I need help with Mavericks Server: an error occurred while configuring your server. I

I need help with Mavricks Server, I get the following: an error occurred while configuring your server. I have deleted the Server.app several times along with the associated com.apple and Server folder. Any more help would be appreciated.

There are usually some log files around, related to the installation. See if Console.app (Applications > Utilities) shows anything relevant to the error, when you've done a fresh install of Server.app and tried the configuration.

Help with OSX server mail setup

Please if anyone can tell me what I am doing wrong, I would be very grateful. I have a company with an externaly hosted website and an an internally hosted email (OSX server). I have everything kind of working, but some things don't seem quite right. I'll explain below:
I have a purchased domain: mycompany.com hosted by godaddy.
I am using Godaddy name servers: ns65.domaincontrol.com and ns66.domaincontrol.com
The external godaddy DNS has an a name entry for my mail server: mail pointing to 123.123.123.123 (which is my companies external static IP address).
There is also a null (@) a name record for my website hosting service (squarespace) pointing to 456.456.456.456
There is a cName record www pointing to the squarespace domain "www.squarespace6.com" (know this is unusual, but it is how squarespace asks this to be set up and does not work otherwise)
There is an MX record with priority 10 and host name @ pointing to mail.mycompany.com
I have a airport extreme router with the appropriate ports forwarded to the OSX server.
The DNS servers on the router are pointed to the internal IP address of the OSX server
I did not change the domain name on the router (mistake?) it is currently san.rr.com
On the OSX server I have set up host name to be mycompany.comDNS is set up with primary zone being mycompany.com
Primary Zone entries include
nameserver = mycompany.com
machine record host name is mycompany.com and the IP address is the internal IP address of the OSX server
another machine record with host name "mail" and IP address is the internal IP address of the OSX server.
Finally, there is a mail exchanger record with mail server "mail.mycompany.com" and priority 10
There are 2 entries autocreated in the Reverse zone
Mail is setup and running on the OSX server providing mail for "mail.mycompany.com"
Users are setup with email address: [email protected] (note: without the mail subdomain - I think this is OK?)
I am using self signed certificate.
In my clients (windows Thunderbird, Mac Mail, iOS mail), the settings are for the incoming mail server host name to be "mail.mycompany.com" and the outgoing also to be "mail.mycompany.com"
I woud have expected this to be imap.mycompany.com and smtp.mycompany.com respectively, but it doesn't work when I input these values and works with the former. Have I set this up wrong?? imap seems to require SSL on port 993 and SMTP seems to require TLS on port 587.Outlook on PC gives me an error that after googling appears to be a problem with not recognizing a fuly qualified hostname form the SMTP client. I see the fix, but wanted to know if that meant that my server didn't have a fully qualified host name and whether I should change that rather than just remove that restriction???
The final problem is that my outgoing emails seem to be getting caught up in other people's spam filters too frequently. What is the main reason for this? Is it because I have set something up wrong and it brings up flags or is it simply because I am not a huge hosting company, or somethign else althogether?
If you've gotten this far, big thanks! If you can help me, even more thanks!

Well, actually they are both getting caught up in spam filters and bounced back. I actually realized that part of the problem is that I have a dynamic IP address, but it doesn't change. Regardless, on the bounce back it looks like hotmail and other domains are rejecting email from my IP and recognize it as dynamic. This was a test server that i would by physically taking to my business where there is a static business IP address (Cox).
Sorry for the very long original message, but it seems that most people don't post enough information for the problem to be solved in their original posts and I was hoping to provide as much detail as possible.
The other is the question of "are things set up right?" It seems strange to me that both my outgoing and incoming servers are "mail.mycompany.com" and not imap.mycompany.com and smtp.mycompany.com and I wonder if this is going to cause me to have problems?
Is it a problem that my email addresses are [email protected] and not [email protected]?
Was I supposed to change the domain name on the router?
Also is it going to be a problem that I am using a self signed certificate?

Airplane help with Webhelp and HTML Help

Hi. We are generating 2 outputs using Robohelp v.6.0: HTML
Help and WebHelp. Standalone they both work fine. The context
sensitive .chm works too. Problems are:
1.) the primary help (Webhelp) does not appear - there isn't
any error msg either.
2.) when an invalid url is used the secondary help file does
appear (HTML help). But this doesn't happen with the correct url of
the primary help - Webhelp
Isn't there supposed to be a reference to the mapping in the
<head> of each htm file?
Can anyone help on this topic? many thanks!

First, move the styles from the form generator to the <head> of your document. Otherwise there is a possibility browsers could ignore the invalid code.
Then move your form div inside the banner div and set the attribute float:right; in your CSS for the form div. Then you should be good to go.

Freely programmed search help with external mapping

Hi all.
I have a freely programmed search help to search for physical inventory items.
I map some data from the component where i use this search help to this search help via external mapping. This works fine.
But in the search help I want to be able to change the mapped data to perform a new serach. When I change the data and start the action to search again (in the serach help component) I still get the old field value from context so that the search returns the same result. When I close the search help afterwards the changes are suddenly visible in the using component. So my entered data are somehow transfered to the original context but not to the context of the used component.
Any ideas?
Thanks
Sascha
Message was edited by:
Sascha Dingeldey

Hi Sascha,
I would suggest, that you do not work with the externally mapped attribute.
Try to copy the value to a "local" attribute in the searchhelp context while WDDOINIT of the component.
This is the attribute you should use for the search.
When you change the searchvalue, it is only changed in the comnponent.
To get the values back to the calling component you need to copy it back while you call the action submit or exit.
Hope this helps
Best regards, Matthias

Newbie Help with SWF

Howdy,
I am working on a website with just plain html/css at the
moment. I was provided a SWF intro for the splash page from a
developer who designed the page. I have implemented the object and
embed code so the SWF loads. Problem is that I want to click the
SWF and have it take me into the website. I tried using a href, but
that doesn't work. Can someone please help me?
thanks

There is a possibility that when developers making flash ad
,implement the clickTag method.
I am not sure it is done in your case.
If it is done the link to the website can be done while
embedding the flash movie in html
like this embed src="name of
your_swf?clickTag=link_of_thewebsite"
Else you should make necessary changes in the source file.
Thanks

Newbie - Help With templates

I am fairly new to dreamweaver. Looking to put together a
basic site for a holiday home for rent. Would like to include
photos of the house and surrounding area, travel details, details
of things to do and see, calendar, temeperature charts etc. Can
anyone suggest where I can get my hands on templates that would
help with this?
Many thanks

The best I've seen are from ProjectSeven -
http://www.projectseven.com/
They are commercial (look at the Page Packs) and they are
excellent.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Gusley5" <[email protected]> wrote in
message
news:[email protected]...
>I guess sources for templates is what I'm looking for.
I've little
>knowledge
> of writing code so was looking for a draft template
which would have a
> professional look to it with regard to font, layout,
colours, buttons to
> use
> for links etc. I suppose some sort of table layout for
including photos
> with
> related text may be best place to start.
>
> Code below is from a starter page available from
dreamweaver. Any other
> suggestions for templates gratefully received.
>
> Thanks
>
> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN"
> "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
> <html xmlns="
http://www.w3.org/1999/xhtml">
> 
> <head>
> 
> <title>Lodging - Catalog</title>
> <meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1" />
> <link rel="stylesheet"
>
href="file:///C|/Program%20Files/Macromedia/Dreamweaver%208/Configuration/BuiltI
> n/StarterPages/mm_lodging1.css" type="text/css" />
> </head>
> <body bgcolor="#999966">
> <table width="100%" border="0" cellspacing="0"
cellpadding="0">
> <tr>
> <td width="15"
nowrap="nowrap"> </td>
> <td height="60" colspan="2" class="logo"
nowrap="nowrap"><br />
> WEBSITE NAME HERE</td>
> <td width="100%"> </td>
> </tr>
>
> <tr bgcolor="#ffffff">
> <td colspan="4"><img
>
src="file:///C|/Program%20Files/Macromedia/Dreamweaver%208/Configuration/BuiltIn
> /StarterPages/mm_spacer.gif" alt="" width="1" height="1"
border="0"
> /></td>
> </tr>
>
> <tr bgcolor="#a4c2c2">
> <td width="15"
nowrap="nowrap"> </td>
> <td height="36" id="navigation"
class="navText"><a
> href="javascript:;">HOME</a></td>
> <td> </td>
> <td width="100%"> </td>
> </tr>
>
> <tr bgcolor="#ffffff">
> <td colspan="4"><img
>
src="file:///C|/Program%20Files/Macromedia/Dreamweaver%208/Configuration/BuiltIn
> /StarterPages/mm_spacer.gif" alt="" width="1" height="1"
border="0"
> /></td>
> </tr>
>
> <tr bgcolor="#ffffff">
> <td valign="top" width="15"><img
>
src="file:///C|/Program%20Files/Macromedia/Dreamweaver%208/Configuration/BuiltIn
> /StarterPages/mm_spacer.gif" alt="" width="15"
height="1" border="0"
> /></td>
> <td valign="top" width="35"><img
>
src="file:///C|/Program%20Files/Macromedia/Dreamweaver%208/Configuration/BuiltIn
> /StarterPages/mm_spacer.gif" alt="" width="35"
height="1" border="0"
> /></td>
> <td width="710" valign="top"><br />
> <table border="0" cellspacing="0" cellpadding="2"
width="610">
> <tr>
> <td colspan="7" class="pageName">Page Name
Here</td>
> </tr>
> <tr>
> <td width="22%" height="110"><img
>
src="file:///C|/Program%20Files/Macromedia/Dreamweaver%208/Configuration/BuiltIn
> /StarterPages/mm_product_sm.gif" alt="small product
photo" width="110"
> height="110" border="0" /></td>
> <td> </td>
> <td width="22%" height="110"><img
>
src="file:///C|/Program%20Files/Macromedia/Dreamweaver%208/Configuration/BuiltIn
> /StarterPages/mm_product_sm.gif" alt="small product
photo" width="110"
> height="110" border="0" /></td>
> <td> </td>
> <td width="22%" height="110"><img
>
src="file:///C|/Program%20Files/Macromedia/Dreamweaver%208/Configuration/BuiltIn
> /StarterPages/mm_product_sm.gif" alt="small product
photo" width="110"
> height="110" border="0" /></td>
> <td> </td>
> <td width="22%" height="110"><img
>
src="file:///C|/Program%20Files/Macromedia/Dreamweaver%208/Configuration/BuiltIn
> /StarterPages/mm_product_sm.gif" alt="small product
photo" width="110"
> height="110" border="0" /></td>
> </tr>
> <tr>
> <td valign="top" class="calendarText"
nowrap="nowrap"><a
> href="javascript:;">Product Name</a><br
/>
> Price: $0.00</td>
> <td> </td>
> <td valign="top" class="calendarText"
nowrap="nowrap"><a
> href="javascript:;">Product Name</a><br
/>
> Price: $0.00</td>
> <td> </td>
> <td valign="top" class="calendarText"
nowrap="nowrap"><a
> href="javascript:;">Product Name</a><br
/>
> Price: $0.00</td>
> <td> </td>
> <td valign="top" class="calendarText"
nowrap="nowrap"><a
> href="javascript:;">Product Name</a><br
/>
> Price: $0.00</td>
> </tr>
> <tr>
> <td colspan="7"> </td>
> </tr>
> <tr>
> <td height="110"><img
>
src="file:///C|/Program%20Files/Macromedia/Dreamweaver%208/Configuration/BuiltIn
> /StarterPages/mm_product_sm.gif" alt="small product
photo" width="110"
> height="110" border="0" /></td>
> <td> </td>
> <td height="110"><img
>
src="file:///C|/Program%20Files/Macromedia/Dreamweaver%208/Configuration/BuiltIn
> /StarterPages/mm_product_sm.gif" alt="small product
photo" width="110"
> height="110" border="0" /></td>
> <td> </td>
> <td height="110"><img
>
src="file:///C|/Program%20Files/Macromedia/Dreamweaver%208/Configuration/BuiltIn
> /StarterPages/mm_product_sm.gif" alt="small product
photo" width="110"
> height="110" border="0" /></td>
> <td> </td>
> <td height="110"><img
>
src="file:///C|/Program%20Files/Macromedia/Dreamweaver%208/Configuration/BuiltIn
> /StarterPages/mm_product_sm.gif" alt="small product
photo" width="110"
> height="110" border="0" /></td>
> </tr>
> <tr>
> <td valign="top" class="calendarText"
nowrap="nowrap"><a
> href="javascript:;">Product Name</a><br
/>
> Price: $0.00</td>
> <td> </td>
> <td valign="top" class="calendarText"
nowrap="nowrap"><a
> href="javascript:;">Product Name</a><br
/>
> Price: $0.00</td>
> <td> </td>
> <td valign="top" class="calendarText"
nowrap="nowrap"><a
> href="javascript:;">Product Name</a><br
/>
> Price: $0.00</td>
> <td> </td>
> <td valign="top" class="calendarText"
nowrap="nowrap"><a
> href="javascript:;">Product Name</a><br
/>
> Price: $0.00</td>
> </tr>
> <tr>
> <td colspan="7"> </td>
> </tr>
> </table> </td>
> <td> </td>
> </tr>
>
> <tr>
> <td width="15"> </td>
> <td width="35"> </td>
> <td width="710"> </td>
> <td width="100%"> </td>
> </tr>
> </table>
> </body>
> </html>
>

Newbie - help with homework.

Create a procedure to insert a record into the Bill_Items table. All the fields in the Bill_Items table will be specified as para with the exception of the Selling_Price, which will be the Current_Price, retrieved from the Menu_Items table. Do not allow the insert to finish unless there are enough of all ingredients on hand. If the insert is successfull, the quantity field in the Ingredient table will need to be updated accordingly.
Tables are below.
Thanks,
CREATE TABLE Bill_Items
Bill_Number NUMBER(6,0)
CONSTRAINT FK_Bill_Items_Bill_Number REFERENCES Bills(Bill_Number)
CONSTRAINT NN_Bill_Items_Bill_Number NOT NULL,
Menu_Item_Number NUMBER(5,0)
CONSTRAINT FK_Menu_Item_Num REFERENCES Menu_Items(Menu_Item_Number)
CONSTRAINT NN_Bill_Items_Menu_Item_Num NOT NULL,
Discount NUMBER(5,2)
CONSTRAINT N_Bill_Items_Discount NULL,
Quantity NUMBER(3,0) DEFAULT 1
CONSTRAINT Bills_Items_Quanity_CC CHECK(Quantity > 0)
CONSTRAINT NN_Bill_Items_Quantity NOT NULL,
Selling_Price NUMBER(6,2) DEFAULT 0
CONSTRAINT Bills_Items_SellingPrice_CC CHECK(Selling_Price >= 0)
CONSTRAINT NN_Bill_Items_Selling_Price NOT NULL,
CONSTRAINT PK_Bill_Items PRIMARY KEY(Bill_Number,Menu_Item_Number)
CREATE TABLE Menu_Item_Ingredients
Menu_Item_Number NUMBER(5,0)
CONSTRAINT FK_Menu_Item_Ing_Menu_Item_Num REFERENCES Menu_Items(Menu_Item_Number)
CONSTRAINT NN_Menu_Item_Ing_Meun_Item_Num NOT NULL,
Ingredient_Number NUMBER(5,0)
CONSTRAINT FK_Menu_Item_Ing_IngredientNo REFERENCES Ingredients(Ingredient_Number)
CONSTRAINT NN_Menu_Item_Ing_IngredientNo NOT NULL,
Quantity NUMBER(5,2) DEFAULT 1
CONSTRAINT Menu_Item_Ing_Quanity_CC CHECK(Quantity > 0)
CONSTRAINT NN_Menu_Item_Ing_Quanity NOT NULL,
Constraint PK_Menu_Item_Ing PRIMARY KEY(Menu_Item_Number, Ingredient_Number)
CREATE TABLE Ingredients
Ingredient_Number Number(5,0)
CONSTRAINT PK_Ingredients_IngredientNo PRIMARY KEY
CONSTRAINT NN_Ingredients_IngredientNo NOT NULL,
Ingredient_Name VarChar2(35)
CONSTRAINT NN_Ingredients_Ingredient_Name NOT NULL,
Portion_Code CHAR(2)
CONSTRAINT FK_Ingredients_PortionCode REFERENCES Portions(Portion_Code)
CONSTRAINT NN_Ingredients_PortionCode NOT NULL
REFERENCES Portions(Portion_Code),
On_Hand NUMBER(6,2) DEFAULT 1
CONSTRAINT Ingredients_OnHand_CC CHECK(On_Hand > 0)
CONSTRAINT NN_Ingredients_On_Hand NOT NULL,
Reorder_Point NUMBER(6,2) DEFAULT 1
CONSTRAINT Ingredients_Reorder_Point CHECK(Reorder_Point > 0)
CONSTRAINT NN_Ingredients_Reorder_Point NOT NULL,
Current_Cost NUMBER(5,2) DEFAULT 0
CONSTRAINT Ingredients_CurrentCost_CC CHECK(Current_Cost >= 0)
CONSTRAINT NN_Ingredients_Current_Cost NOT NULL
CREATE TABLE Menu_Items
Menu_Item_Number NUMBER(5,0)
CONSTRAINT PK_Menu_Items_MenuItemsNo PRIMARY KEY
CONSTRAINT NN_Menu_Items_MenuItemsNo NOT NULL,
Menu_Item_Name VARCHAR2(50)
CONSTRAINT NN_Menu_Items_Menu_Item_Name NOT NULL,
Current_Price NUMBER(6,2) DEFAULT 0
CONSTRAINT Menu_Items_CurrentPrice CHECK(Current_Price >=0)
CONSTRAINT NN_Menu_Items_Current_Price NOT NULL,
Production_Cost NUMBER(6,2) DEFAULT 0
CONSTRAINT Menu_Items_ProdCost CHECK(Production_Cost >=0)
CONSTRAINT NN_Menu_Items_Production_Cost NOT NULL
);

Newbie to oracle - help with homework.. Letting others do your work is called cheating, where I live.
C.

Help with SQL Server 2005 http Endpoint

I am trying to use mx:webservice to directly connect to a SQL
Server 2005 HTTP Endpoint. Is this possible. Is there going to be a
problem with crossdomain issues? If the Endpoint is actively
listening on port 80 then IIS cannot. So I cannot place
crossdomain.xml in webserver, how will I overcome this crossdomain
problem? Am I making this more complicated than it is? If anyone
has an example it would be appreciated. All I want is a flex2 app
talking directly to sql server. Seems possible.

Kent, I see that many others have reported that error (doing
a google search), but I see no ready answers. I saw something that
reminded me of a connection string value that I've seen answer some
problems. May be worth a shot for you: try adding this string to
the connection string (in "advanced options") for your datasource:
AuthenticationMethod=Type2
If it doesn't solve it, remove it. But keep it handy in case
it ever may help with some other problem.
Here's one other possible answer for you:
http://www.webmasterkb.com/Uwe/Forum.aspx/coldfusion-server/3206/SQL-Server-2000-Windows-A uth
Sorry I can't be more clear for you.

Help with a server - crashed after update -SOLVED

Hi everybody.
at the school where I study,. its the student who´ll take cake of the network, and now we have a really big problem...
After an pacman -Syu, (by an older student) one of the servers crashe. Its the only one that´s been updatet. Its run f.i. Apache , stunnel and up against an LDap server.
The problem is that the only way you can get into it, is in single user mode. At normal boot at the login-menu - we could type in the username and passwd, but the machine is too long to validate the passwd so it times out. thats also when you trying to lock in as root. And we cant start Apache(Even though we selv compiled it, and not did a pacman on that one.) But I´m not into arch that much yet, so hoefully someone can give me a hint about what went wrong during the updates..
But the worst part about that one is, that everything goes by that one, so we cant get in på using ssh.. But after 7 hours trying and studying the net - we didn´t get anywhere. and we don´t have a clue what to do ...
looking in the logfiles do not show anything unusual....
in normalboot at the login screen, after ca. 40sek. the message comes :
The server died unexpectet... thats it
So please help with this one - if anyone have a clue what went wrong..

Heya,
have you tried using a knoppix-cd or another live-cd to have a look at the system or isn't that a possibility?
You can also login by adding the following kernelparameter: init=/bin/sh
However, I'm not sure how to mount the partitions then.
I'm guessing that the message "server died unexpectedly" is coming from a certain server-process (not the machine). Do you know which process and have you had a look at the logfiles (if there are any) of that process?
You can have a look at the output of the "dmesg"-command maybe if it is kernel-related (I think).
You say it isn't overridden. Are you sure? You can tell pacman to not override packages or certain files, but you have to mention it in the "/etc/pacman.conf"-file.
Hopes this helps you,
greetings,
Michel

Help with a server program

Hello,
I don't know much about threading, but I've got this server program (code follows). And where it does this... :
                    // Create a new thread for the connection
                    HandleAClient thread = new HandleAClient(connectToClient);
                    cn = clientNo;
                    // Start the new thread
                    thread.start();I need it to create another instance of the client program that accessing it with the same thread(I think, as i said I don't know much about threads). That way when a remote user accesses the client program, the server will automatically open another client program on the machine the server is running on. Then while their both using the same thread, they'll be able to speak back and forth without anyone else getting their text.
Does this make sense? Can anyone help?
Here is the server code, I don't have it perfected yet to send the text, but the clients will regester with the server.
// MultiThreadServer.java: The server can communicate with
// multiple clients concurrently using the multiple threads
import java.io.*;
import java.net.*;
import java.util.*;
// MultiThreadServer should be able to
//    handle text from multiple users at once
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class MultiThreadServer extends JFrame {
     // Text area for displaying contents
     private JTextArea jta = new JTextArea();
     public static void main(String[] args) {
          new MultiThreadServer();
     public int cn = 0;
     public MultiThreadServer() {
          // Place text area on the frame
          getContentPane().setLayout(new BorderLayout());
          getContentPane().add(new JScrollPane(jta), BorderLayout.CENTER);
          setTitle("MultiThreadServer");
          setSize(500, 300);
          setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
          setVisible(true); // It is necessary to show the frame here!
          try {
               // Create a server socket
               ServerSocket serverSocket = new ServerSocket(8000);
               jta.append("MultiThreadServer started at " + new Date() + '\n');
               // Number a client
               int clientNo = 1;
               while (true) {
                    // Listen for a new connection request
                    Socket connectToClient = serverSocket.accept();
                    // Display the client number
                    jta.append("Starting thread for client " + clientNo +
                         " at " + new Date() + '\n');
                    // Find the client's host name, and IP address
                    InetAddress clientInetAddress =
                         connectToClient.getInetAddress();
                    jta.append("Client " + clientNo + "'s host name is "
                         + clientInetAddress.getHostName() + "\n");
                    jta.append("Client " + clientNo + "'s IP Address is "
                         + clientInetAddress.getHostAddress() + "\n");
                    // Create a new thread for the connection
                    HandleAClient thread = new HandleAClient(connectToClient);
                    cn = clientNo;
                    // Start the new thread
                    thread.start();
                    // Increment clientNo
                    clientNo++;
          catch(IOException ex) {
               System.err.println(ex);
     // Inner class
     // Define the thread class for handling new connection
     class HandleAClient extends Thread {
          private Socket connectToClient; // A connected socket
          // Construct a thread
          public HandleAClient(Socket socket) {
               connectToClient = socket;
          // Run a thread
          public void run() {
               try {
                    // Create data input and output streams
                    DataInputStream isFromClient = new DataInputStream(
                         connectToClient.getInputStream());
                    DataOutputStream osToClient = new DataOutputStream(
                         connectToClient.getOutputStream());
                    osToClient.writeDouble(cn);
                    // Continuously serve the client
                    while (true) {
                         // Receive radius from the client
                         double radius = isFromClient.readDouble();
                         // Compute area
                         double area = radius*radius*Math.PI;
                         // Send area back to the client
                         osToClient.writeDouble(area);
                         jta.append("radius received from client: " +
                              radius + '\n');
                         jta.append("Area found: " + area + '\n');
               catch(IOException e) {
                    System.err.println(e);
}And here is the Client Program code, note that the sending of text does not yet work here either.
// Client.java: The client sends the input to the server and receives
//           result back from the server
import java.io.*;
import java.net.*;
import java.util.*;
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.applet.*;
public class Client extends JFrame implements ActionListener {
     // Text field for receiving radius
     private JTextField jtf = new JTextField(40);
     // Text area to display contents
     private JTextArea jta = new JTextArea();
     // IO streams
     DataOutputStream osToServer;
     DataInputStream isFromServer;
     public static void main(String[] args) {
          new Client();
     public Client() {
          // Ask the user for a name
          String s = JOptionPane.showInputDialog
               (null, "Please Enter Your Name:", "ZedX Web Messenger", JOptionPane.QUESTION_MESSAGE);
          // Panel p to hold the label and text field
          JPanel p = new JPanel();
          p.setLayout(new BorderLayout());
          p.add(new JLabel("Enter Text"), BorderLayout.WEST);
          p.add(jtf, BorderLayout.CENTER);
          p.add(new JButton("Go"), BorderLayout.EAST);
          jtf.setHorizontalAlignment(JTextField.LEFT);
//          jta.editable(false);
          getContentPane().setLayout(new BorderLayout());
          getContentPane().add(p, BorderLayout.NORTH);
          getContentPane().add(new JScrollPane(jta), BorderLayout.CENTER);
          jtf.addActionListener(this); // Register listener
          String user = "Client";
          setTitle(user);
          setSize(500,500);
          setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
          setVisible(true); // It is necessary to show the frame here!
          try {
               // Create a socket to connect to the server
               Socket connectToServer = new Socket("10.0.5.39", 8000);
               // Create an input stream to receive data from the server
               isFromServer = new DataInputStream(
                    connectToServer.getInputStream());
               // Create an output stream to send data to the server
               osToServer = new DataOutputStream(connectToServer.getOutputStream());
               // Send client Name to server
               // Get client number and name from server
               double cn = isFromServer.readDouble();
               user = user + " " + cn + ": " + s;
               setTitle(user);
          catch (IOException ex) {
               jta.append(ex.toString() + '\n' + "Administrator must be offline, try again later.");
     public void actionPerformed(ActionEvent e) {
          String actionCommand = e.getActionCommand();
          if (e.getSource() instanceof JTextField) {
               try {
                    // Get the text from the text field
                    String radius = jtf.getText();
                    // Send the text to the server
                    osToServer.println(radius);
                    osToServer.flush();
                    // Get text from the server
                    double area = isFromServer.readDouble();
                    // Display to the text area
                    jta.append("You Sent: " + radius + "\n");
                    jta.append("Server" + area + '\n');
               catch (IOException ex) {
                    System.err.println(ex);
}

bump

Help with Client/Server communication

Im working on a project for university, and one aspect of it is downloading files from a remote computer.
The majority of my project so far has been using RMI only, for browsing the remote computer, deleting files, renaming files, creating new directories and searching for files. All of this is done via a GUI client, with a server running on the server machine.
Ive now reached the part where I'll need to implement the downloading of files. I want the user to select a file from within the GUI and click download, and get it off the server.
I dont need any help with event handlers or getting the contents of the remote computer or anything of that sort.
Consider when I have the name of the file that I want to download from the client.
Im having trouble understanding how exactly its going to work. Ive seen examples of file transfer programs where the user types in the name of the file in the command line which they want to download. But my implementation will differ.
Every time the user clicks the button, I have to send to the server the name of a different file which will need to be downloaded.
I imagine in the event handler for the Download button I'll be creating a new socket and Streams for the download of the file that the user wants. But how am I to send to the client a dynamic file name each time when the user tries to download a different file?
I am a bit new at this, and Ive been searching on the forums for examples and Ive run through them, but I think my situation is a bit different.
Also, will RMI play any part in this? Or will it purely be just Socket and Streams?
I'll also develop an Upload button, but I imagine once I get the Download one going, the Upload one should be much harder.
Any ideas and help would be appreciated.

Hi
I'm no RMI expert... and I did not understand your question very well....
I think you should do this procedure:
you should send a request for the file from the client to the server . then a new connection between the two machines should be made which will be used to send the file.
by using UDP you will achive it quite nicely...
//socket - is your TCP socket you already use on the client...
//out - socket's output stream
byte [] b=new String("File HelloWorld.java").getBytes();
// you should use a different way for using this rather than using strings...
out.write(b);
DatagramSocket DS=new DatagramSocket(port);
DS.recieve(packet); //the data is written into the packet...on the server side you should...
//socket - is your TCP socket you already use on the server...
//in - socket's input stream
byte [] b=new byte[256];
out.read(b);
/*Here you check what file you need to send to the client*/
DatagramSocket DS=new DatagramSocket(server_port);
byte [] data=//you should read the file and translate it into bytes and build a packet with them
DS.send(packet); //the data is in the packet...This way the server sends the required file to the client .....
I hope it will help, otherwise try being clearier so I could help you...
SIJP

Help with client server chat2

Hi aggain,
And here is my Client part of program
Server part is in topic "help with client server1
CLIENT.JAVA
import java.io.*;
import java.net.*;
import java.lang.*;
import javax.swing.*;
public class Client {
private static int SBAP_PORT = 5555;
private static String server = "localhost";
public static Socket socket = null;
//main starts
public static void main(String[] args) {
try { //handle broken connection
//set up connection to server, input, output streams
try {
socket = new Socket(server, SBAP_PORT);
// handle wrong host/port errors
catch (UnknownHostException e) {
System.out.println("Unknown IP address for server.");
System.exit(0);
} //end catch UnknownHost
catch (IOException ex) {
System.out.println("No server found at specified port.");
System.exit(0);
} //end catch IOException
catch (Exception exc) {
System.out.println("Error :" + exc);
System.exit(0);
} //end cath Exception exc
InputStream input = socket.getInputStream();
OutputStream output = socket.getOutputStream();
BufferedReader reader = new BufferedReader(new InputStreamReader(input));
PrintWriter writer = new PrintWriter(output);
while (true) {
String client_in = JOptionPane.showInputDialog(null, "Client Request");
System.out.println("Sending: " + client_in);
writer.print(client_in);
writer.flush();
//read server entry and dispay
String response = reader.readLine();
if (response == null || response.equals("QUIT"))
System.out.println("No data received");
else
System.out.println("Receiving: " + response);
} //end try
catch (IOException e) {
System.out.println("Connection with server broken:" + e);
System.exit(0);
} //end catch IOException
catch (Exception exp) {
System.out.println("Error :" + exp);
System.exit(0);
} //end catch exp
}//end main()
}//end class Client

http://forum.java.sun.com/thread.jspa?threadID=574466&messageID=2861516#2861516

Newbie: help with join in a select query

Hi: I need some help with creating a select statement.
I have two tables t1 (fields: id, time, cost, t2id) and t2 (fields: id, time, cost). t2id from t1 is the primary key in t2. I want a single select statement to list all time and cost from both t1 and t2. I think I need to use join but can't seem to figure it out even after going through some tutorials.
Thanks in advance.
Ray

t1 has following records
pkid, time, cost,product
1,123456,34,801
2,123457,20,802
3,345678,40,801
t2 has the following records
id,productid,time,cost
1,801,4356789,12
2,801,4356790,1
3,802,9845679,100
4,801,9345614,12
I want a query that will print following from t1 (time and cost for records that have product=801)
123456,34
345678,40
followed by following from t2 (time and cost for records that have productid=801)
4356789,12
4356790,1
9345614,12
Is this possible?
Thanks
ray

Newbie - Help with externally served html

Similar Messages

Maybe you are looking for