Newbie Help with videocameras and editing software

I am a third grade teacher who can whip around in imovie pretty well, but I want to expand and post training videos to the web. I also want to vodcast. I need a relatively easy videocamera, and of course, reasonably priced. I don't understand all the mumbo jumbo about the dvd, tape, flash videocameras except to know that some are not compatible with osx.
Also would I be better off with Final Cut Pro Express?
Help to a newbie...

susannamessier wrote:
OK now I am looking and I want this camera to be compatible with imovie also. On the Apple support page along side the Canon's I am looking at I see:
Video stabilization limitations more...
Filming in Cinema or 24p mode more...
What? Goodness could this be anymore complicated?
It's very intimidating at first. The short answer is that all this is compatible with iMovie.
The longer one is:
The number refers to frames per second (frame rate, in the jargon). Cine cameras run at 24 frames per second, so 24 fps is considered to give a look to moving objects similar to what you'd see in a filmed movie (think wagon wheels appearing to go backwards in old westerns).
p refers to progressive, and means that you're getting 24 complete frames each second - again like film (this idea of mimicking film is the holy grail to some video makers - I say video is video, and should be treated like video). The opposite of progressive is i, for interlaced. Interlacing is a technique used in television since the early days as a way of giving you a better looking TV picture; in interlacing, instead of looking at each frame as a whole, you split it into very narrow lines, then scan al the odd ones, followed by all the even ones. In the old days, the scanning had to be linked to the way in which the electricity supply worked, so scanning was based on a frequency of 60 cycles per second (in the USA).
So in video, you will see camcorders offering a frame rate of 60i as standard - i.e. 60 interlaced frames in one second.. They usually also offer 30p (which combines the results of 2 60i scans to give you 30 complete frames. And then as you've seen, 24p so you can make it look like film.
You can shoot good movies in any of those frame rates; which ones you choose are up to you, but they're all used by many people for many different purposes. Some people will tell you you must use frame rate x for subject y. Listen, but don't follow blindly - try it out and see what works for you.
The issue you will sometimes here debated about iMovie is how to take video you have shot interlaced, and get iMovie to export it as progressive, but still in high quality. Don't worry about that right now.
Just get a camcorder you like, and make some movies. First feel really proud of them, then learn some more, and feel embarrassed by them (this is what we all do!).
Hope that helps.

Similar Messages

Help with Importing and Editing an Image

Hello All,
I am working on a project where I need to import an image into LabView and edit it. The gist of my program is that I want to create a VI that generates an interactive floorplan.
I want to be able to import the bitmap or png into my file so I can edit the file by assigning flashing colors to each room, etc.
I tried to import the .png by wiring "Read png" --> "Draw Flattened Pixmap" --> "new picture".
When I run the program I get a "general I/O" error in the "Read PNG" block even though it lets me select which png I can import.
Does LabVIEW 8.5 not allow for importing PNG files? Does anyone have any idea why I am getting this error?
On another note, I was reading about some of the IMAQ VI's and they seem like they may work for importing an image and creating graphics, etc. Should I try to delve a little deeper into the IMAQ stuff?
Thanks much for the help!

Great call on checking whether it was just a bad file.
I tried to convert it from a .bmp to a .png by simply renaming it which LabVIEW did not like...
So I just opened it up and re-saved it with photo editing software and it worked!
Now I just have to play around with my editing options to get the graphics I want.
I'll post some sample code just for suggestions that anyone may have. This is just my preliminary structure without most of my condition statements. All the code inside the case structures will be added when I figure all this stuff out.
My goal is to have each strobe and interlock correspond to a different graphic on the floorplan. For example, when strobe 1 reads red, I want the corresponding room to flash red and vice versa with green and yellow. Also, when interlock 1 reads false, I want a flashing light to pop up next to the corresponding door.
Anyone have any ideas for how to make these kinds of graphics? I figured I may be able to use a color box for the solid colors and LEDs for the flashing lights but I would rather edit the pixels to make it look more professional.
Thanks for all the help!
Attachments:
LabStatusProgram.vi ‏9 KB

Newbie help with 12i and firefox java issue

We are in the testing stages for a 12i upgrade. I’m currently testing browser and java version compatibility using an upgraded test system. My problem is the version of java on the desktop client. IE7 will launch the apps fine with any version of java. However, any version of Firefox (including just released v3) will not launch java unless java version 5 update 13 is loaded. I’ve reviewed several metalink docs including 389422.1 and 393931.1 and have used the workaround listed forcing FF to use the older version of java. However, that means that we will have to roll out this older version of java to all clients to use Firefox. During my research I found where Oracle provides a techstack update for 11i (290807.1) that will fix this issue and allow Firefox to work with newer versions of java. Has anyone else run into this issue and if so how did you address it? Is there a 12i update that will fix this issue? I’m a newbie that’s started supporting Oracle, etc. so forgive me for any ignorance I show on the subject. Thanks in advance.

Tod,
It sounds like your Oracle E-Business Suite Release 12 instance is configured to request end-users to use JRE 1.5.0_13.
Firefox has a known limitation (or feature, depending on your point of view): it will invoke only the specified JRE version requested by the E-Business Suite, even if later versions of the JRE (e.g. 1.6.0_03) are installed on the same desktop.
This behaviour is explained in more detail in Note 290807.1 in Appendix A. Since this behaviour is hardcoded into Firefox, your options are:
1. Configure your Oracle E-Business Suite Release 12 environment to request a later version of JRE installed on your Firefox-equipped desktops
2. Use IE -- it doesn't enforce static versioning.
3. Contact the Mozilla team and request that they provide a new option to use either static versioning (the status quo) or the latest JRE version installed on the desktop.
Regards,
Steven

VIDEO CONVERSION AND EDITING SOFTWARE

I have recorded lots of INTERESTING videos while working as lifeguard this summer. Most of them are just 3 minutes raw AVIs of about 100MB in size. Because my digital cam does not have any built-in compression they are huge in size. I am looking for some Video Conversion and Editing software which allows me to convert them to some other format or at least let me encode them with some nice video codecs. I would like to put them on my web site. I promise I will post a link to those video here if you guys help me out with some free or Borrowed software.

Nice find!!!
It has some interesting cyber fun software. It might just be my perception but the site seems to have a lot more than just video formatting tools.
Check out following links

Help with count and sum query

Hi I am using oracle 10g. Trying to aggregate duplicate count records. I have so far:
SELECT 'ST' LEDGER,
CASE
WHEN c.Category = 'E' THEN 'Headcount Exempt'
ELSE 'Headcount Non-Exempt'
END
ACCOUNTS,
CASE WHEN a.COMPANY = 'ZEE' THEN 'OH' ELSE 'NA' END MARKET,
'MARCH_12' AS PERIOD,
COUNT (a.empl_id) head_count
FROM essbase.employee_pubinfo a
LEFT OUTER JOIN MMS_DIST_COPY b
ON a.cost_ctr = TRIM (b.bu)
INNER JOIN MMS_GL_PAY_GROUPS c
ON a.pay_group = c.group_code
WHERE a.employee_status IN ('A', 'L', 'P', 'S')
AND FISCAL_YEAR = '2012'
AND FISCAL_MONTH = 'MARCH'
GROUP BY a.company,
b.district,
a.cost_ctr,
c.category,
a.fiscal_month,
a.fiscal_year;
which gives me same rows with different head_counts. I am trying to combine the same rows as a total (one record). Do I use a subquery?

Hi,
Whenever you have a problem, please post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) from all tables involved.
Also post the results you want from that data, and an explanation of how you get those results from that data, with specific examples.
user610131 wrote:
... which gives me same rows with different head_counts.If they have different head_counts, then the rows are not the same.
I am trying to combine the same rows as a total (one record). Do I use a subquery?Maybe. It's more likely that you need a different GROUP BY clause, since the GROUP BY clause determines how many rows of output there will be. I'll be able to say more after you post the sample data, results, and explanation.
You may want both a sub-query and a different GROUP BY clause. For example:
WITH    got_group_by_columns     AS
     SELECT a.empl_id
     ,     CASE
                    WHEN c.category = 'E'
              THEN 'Headcount Exempt'
                    ELSE 'Headcount Non-Exempt'
            END          AS accounts
     ,      CASE
                    WHEN a.company = 'ZEE'
                    THEN 'OH'
                    ELSE 'NA'
            END          AS market
     FROM              essbase.employee_pubinfo a
     LEFT OUTER JOIN mms_dist_copy             b ON   a.cost_ctr     = TRIM (b.bu)
     INNER JOIN       mms_gl_pay_groups        c ON   a.pay_group      = c.group_code
     WHERE     a.employee_status     IN ('A', 'L', 'P', 'S')
     AND        fiscal_year           = '2012'
     AND        fiscal_month          = 'MARCH'
SELECT    'ST'               AS ledger
,       accounts
,       market
,       'MARCH_12'          AS period
,       COUNT (empl_id)      AS head_count
FROM       got_group_by_columns
GROUP BY accounts
,            market
;But that's just a wild guess.
You said you wanted "Help with count and sum". I see the COUNT, but what do you want with SUM? No doubt this will be clearer after you post the sample data and results.
Edited by: Frank Kulash on Apr 4, 2012 5:31 PM

Help with writing and retrieving data from a table field with type "LCHR"

Hi Experts,
I need help with writing and reading data from a database table field which has a type of "LCHR". I have given an example of the original code but don't know what to change it to in order to fix it and still read in the original data that's stored in the LCHR field.
Basically we have two Function modules, one that saves list data to a database table and one that reads in this data. Both Function modules have an identicle table which has an array of fields from type INT4, CHAR, and type P. The INT4 field is the first one.
Incidentally this worked in the 4.7 non-unicode system but is now dumping in the new ECC6 Unicode system.
Thanks in advance,
C
SAVING THE LIST DATA TO DB
DATA: L_WA(800).
LOOP AT T_TAB into L_WA.
ZDBTAB-DATALEN = STRLEN( L_WA ).
MOVE: L_WA to ZDBTAB-RAWDATA.
ZDBTAB-LINENUM = SY-TABIX.
INSERT ZDBTAB.
READING THE DATA FROM DB
DATA: BEGIN OF T_DATA,
             SEQNR type ZDBTAB-LINENUM,
             DATA type ZDBTAB-RAWDATA,
           END OF T_TAB.
Select the data.
SELECT linenum rawdata from ZDBTAB into table T_DATA
     WHERE repid = w_repname
     AND rundate = w_rundate
     ORDER BY linenum.
Populate calling Internal Table.
LOOP AT T-DATA.
APPEND T_DATA to T_TAB.
ENDLOOP.

Hi Anuj,
The unicode flag is active.
When I run our report and then to try and save the list data a dump is happening at the following point
LOOP AT T_TAB into L_WA.
As I say, T_TAB consists of different fields and field types whereas L_WA is CHAR 800. The dump mentions UC_OBJECTS_NOT_CONVERTIBLE
When I try to load a saved list the dump is happening at the following point
APPEND T_DATA-RAWDATA to T_TAB.
T_DATA-RAWDATA is type LCHR and T_TAB consists of different fields and field types.
In both examples the dumps mention UC_OBJECTS_NOT_CONVERTIBLE
Regards
C

Help with cs3 and fcp -from cs2 and fcp thread..

didnt want to hijack the thread about cs2 and fcp so started a new one
hi, I'm using a proRes 422 file ( mov ) 1920x1080p 23.98fps 16:9. Loads and plays fine in CS3 (custom desktop settings)...but wouldn't mind knowing your project settings for your trial shooternz...so I can compare...
My file is dark and a little flat...so I used levels effect adjustments. However, though it looks way better and exports OK ( hdtv 1920x1080p 24fps) I do see some "noise" now if I freeze the frame...is that common or am I over doing it on the gamma and levels correction ?
I'm just doing hd for the first time really on this machine, trying to figure out what I need in future for machine and upgrade to CS5...so I am going to dissect this file and figure this out til the cows come home so I don't have to deal with problems in future with new machine, etc.
Another thing...I have media info on this saying mpeg-4 ( mov wrapper) video = apcn ..audio = ipcm..
audio 1,536kbps, 1 hz, 16bits, 3 channels, ipcm..
However, there is no sound on the track which loads into audio 4 when video goes on video 1. This was shot with a boom - as I can see a boom shadow in shot during " back to 1 " on the set (when dolly moves back to 1 etc) .... ( sound mixer) so it's possible there is in fact NO SOUND embedded in the video file. Is that common to have a soundtrack appear even if it is empty with proRes ?
thanks...Rod

Wow, not too popular a subject ...this....
Got an update from the man who sent me the prores file...and a little info re: his opinion of adobe coming from FCP...I will share it with you all...
If you are going the Adobe route, I would highly recommend that because Premiere CS5 is a really impressive app when it comes to working with footage and editing. I have recently moved over to the Adobe CS5 Suite because Final Cut is good, but it hasn't been updated in a while....and the Mac is a really expensive alternative to a really good PC.
The color space for the clip I sent over was set for Rec709 HD Colorspace which is meant for broadcast, but on a non calibrated monitor, it will look dark. It usually requires a gamma shift and color treatment (since the clip is uncorrected), but it sounds like you are on your way.
Given the RED work flow, we always shoot raw and make the adjustments prior to rendering. The main reason we use the Adobe Suite is because you can work natively with any footage in the digital work flow.....FCP requires you to transcode everything into a Pro-Res Quicktime and you lose all of the really granular ability to treat the footage in order to get through the edit and color grade.
sooo, new computer will have a broadcast monitor ( just in case one is needed )...
I adjusted my clip by eye, plus vectorgraph etc, (levels and gamma) and it turned out fine...
Rod

I need easy audio and video converting and editing software?

I need easy audio and video converting and editing software that wont cost $400.

I highly recommend you try Video Monkey. It's free, though donations are certainly accepted, and does an excellent job of converting .mov to .wmv. Choose Best (2 Pass) for Encoding Speed and depending upon the size of your original file, uncheck 320 pixels wide to create a larger converted image. I set Quality to "Go Nuts".
Another good commercial program is Video Converter Ultimate for Mac. It works as video converter and editor. The version for 2 Pass conversion is approximately $69. , which is considerably less than the $400+ that Adobe Premiere is asking for its editor. I'd still prefer a freebie though, but there's little choice...

Video creating and editing software

Does anyone have any good suggestions for video creating and editing software. I'm talkin about taking videos from my digital camera and insering them, adding music over the top, maybe some cool transition effects. I don't think that imovie will do it???

Hi
I don't see why iMovie shouldn't, ask the people in the iMovie Forum:
http://discussions.apple.com/category.jspa?categoryID=141
Steve

MOVED: [Athlon64] Need Help with X64 and Promise 20378

This topic has been moved to Operating Systems.
[Athlon64] Need Help with X64 and Promise 20378

I'm moving this the the Administration Forum. It seems more apporpiate there.

Newbie help with editing files in DW CS3

I am new to using Dreamweaver, and I am having trouble with
trying to edit existing files using DW CS3. When I open an existing
file on my local site, DW converts some of the code using &.
This is a problem because I need to edit the file just as it was
originally written, so I can save it after editing and upload to my
website.
In my Preferences, I have Code Rewriting set to:
-Rewrite Code: Fix invalidly nexted and unclosed tags
[Unchecked]
-Rewrite Code: Rename form items when posting [Checked]
-Rewrite Code: Remove extra closing tags [Unchecked]
-Never rewrite code: In files with extensions .as .asr .asc
.asp .ascx .asmx .aspx .cfc .cfm .cfml .config .cs .ihtml .js .jsp
.php .php3 .vb .xml .xsl .xslt .xul
-Special characters: Encode <, >, &, and " in
attribute values using & [Unchecked]
-URL encoding: Do not encode special characters
-Active Content: Insert using browser-safe scripts [Checked
by default]
-Active Content: Convert tags to scripts on file open
[Unchecked]
Today, I opened a file with an .xml extension, and DW rewrote
the special characters > and '. Since I have in my preferences
to Never rewrite code in .xml, I don't understand why DW is
rewriting the code. Also, in my preferences I have unchecked the
Special Characters, so why is DW still rewriting the code?
Do I have some of the Code Rewriting preferences set wrong?
Is there another place I need to tell DW not to rewrite
existing code?
Thanks for your help!
Cyndi

It imported both, but only shows you the raw file. Ever. What you see and what you edit will only be the raw file. The associated JPG file will follow the raw file around if you move it or rename it using Lightroom, but other than that, Lightroom will ignore it. You could safely delete the JPG, and Lightroom wouldn't complain--probably wouldn't even notice.
There's a preference you can set that will cause JPGs to be imported as separate images. Then you'd be able to see both of them and edit them separately. That preference won't take effect on images that are already in the catalogue, but will affect all future imports.
Hal

Help with encapsulation and a specific case of design

Hello all. I have been playing with Java (my first real language and first OOP language) for a couple months now. Right now I am trying to write my first real application, but I want to design it right and I am smashing my head against the wall with my data structure, specifically with encapsulation.
I go into detail about my app below, but it gets long so for those who don't want to read that far, let me just put these two questions up front:
1) How do principles of encapsulation change when members are complex objects rather than primitives? If the member objects themselves have only primitive members and show good encapsulation, does it make sense to pass a reference to them? Or does good encapsulation demand that I deep-clone all the way to the bottom of my data structure and pass only cloned objects through my top level accessors? Does the analysis change when the structure gets three or four levels deep? Don't DOM structures built of walkable nodes violate basic principles of encapsulation?
2) "Encapsulation" is sometimes used to mean no public members, othertimes to mean no public members AND no setter methods. The reasons for the first are obvious, but why go to the extreme of the latter? More importantly HOW do you go to the extreme of the latter? Would an "updatePrices" method that updates encapsulated member prices based on calculations, taking a single argument of say the time of year be considered a "setter" method that violates the stricter vision of encapsulation?
Even help with just those two questions would be great. For the masochistic, on to my app... The present code is at
http://www.immortalcoil.org/drake/Code.zip
The most basic form of the application is statistics driven flash card software for Japanese Kanji (Chinese characters). For those who do not know, these are ideographic characters that represent concepts rather than sounds. There are a few thousand. In abstract terms, my data structure needs to represent the following.
- There are a bunch of kanji.
   Each kanji is defined by:
   - a single character (the kanji itself); and
   - multiple readings which fall into two categories of "on" and "kun".
      Each reading is defined by:
      - A string of hiragana or katakana (Japanese phoenetic characters); and
      - Statistics that I keep to represent knowledge of that reading/kanji pair.Ideally the structure should be extensible. Later I might want to add statistics associated with the character itself rather than individual readings, for example. Right now I am thinking of building a data structure like so:
- A Vector that holds:
   - custom KanjiEntry objects that each hold
      - a kanji in a primitive char value; and
      - two (on, kun) arrays or Vectors of custom Reading objects that hold
         - the reading in a String; and
         - statistics of some sort, probably in primitive valuesFirst of all, is this approach sensible in the rough outlines?
Now, I need to be able to do the obvious things... save to and load from file, generate tables and views, and edit values. The quesiton of editting values raises the questions I identified above as (1) and (2). Say I want to pull up a reading, quiz the user on it, and update its statistics based on whether the user got it right or wrong. I could do all this through the KanjiEntry object with a setter method that takes a zillion arguments like:
theKanjiEntry.setStatistic(
"on",   // which set of readings
2,      // which element in that array or Vector
"score", // which statistic
98);      // the valueOr I could pass a clone of the Reading object out, work with that, then tell the KanjiEntry to replace the original with my modified clone.
My instincts balk at the first approach, and a little at the second. Doesn't it make more sense to work with a reference to the Reading object? Or is that bad encapsulation?
A second point. When running flash cards, I do not care about the subtlties of the structure, like whether a reading is an on or a kun (although this is important when browsing a table representing the entire structure). All I really care about is kanij/reading pairings. And I should be able to quickly poll the Reading objects to see which ones need quizzing the most, based on their statistics. I was thinking of making a nice neat Hashtable with the keys being the kanji characters in Strings (not the KanjiEntry objects) and the values being the Reading objects. The result would be two indeces to the Reading objects... the basic structure and my ad hoc hashtable for runninq quizzes. Then I would just make sure that they stay in sync in terms of the higher level structure (like if a whole new KanjiEntry got added). Is this bad form, or even downright dangerous?
Apart from good form, the other consideration bouncing around in my head is that if I get all crazy with deep cloning and filling the bottom level guys with instance methods then this puppy is going to get bloated or lag when there are several thousand kanji in memory at once.
Any help would be appreciated.
Drake

Usually by better design. Move methods that use the
getters inside the class that actually has the data....
As a basic rule of thumb:
The one who has the data is the one using it. If
another class needs that data, wonder what for and
consider moving that operation away from that class.
Or move from pull to push: instead of A getting
something from B, have B give it to A as a method
call argument.Thanks for the response. I think I see what you are saying.. in my case it is something like this.
Solution 1 (disfavored):
public class kanjiDrill{ // a chunk of Swing GUI or something
     public void runDrill(Vector kanjiEntries){
          KanjiEntry currentKanjiEntry = kanjiEntries.elementAt(0); // except really I will pick one randomly
          char theKanji = currentKanjiEntry.getKanji();
          String theReading = currentKanjiEntry.getReading();
          // build and show a flashcard based on theKanji and theReading
          // use a setter to change currentKanji's data based on whether the user answers correctly;
}Solution 2 (favored):
public class kanjiDrill{ // a chunk of Swing GUI or something
     public void runDrill(Vector kanjiEntries){
          KanjiEntry currentKanjiEntry = kanjiEntries.elementAt(0); // except really I will pick one randomly
          currentKanji.buildAndShowFlashcard(); // method includes updating stats
}I can definitely see the advantages to this, but two potential reasons to think hard about it occur to me right away. First, if this process is carried out to a sufficient extreme the objects that hold my data end up sucking in all the functionality of my program and my objects stop resembling natural concepts.
In your shopping example, say you want to generate price tags for the items. The price tags can be generated with ONLY the raw price, because we do not want the VAT on them. They are simple GIF graphics that have the price printed on a an irregular polygon. Should all that graphics generating code really go into the item objects, or should we just get the price out of the object with a simple getter method and then make the tags?
My second concern is that the more instance methods I put into my bottom level data objects the bigger they get, and I intend to have thousands of these things in memory. Is there a balance to strike at some point?
It's not really a setter. Outsiders are not setting
the items price - it's rather updating its own price
given an argument. This is exactly how it should be,
see my above point. A breach of encapsulation would
be: another object gets the item price, re-calculates
it using a date it knows, and sets the price again.
You can see yourself that pushing the date into the
item's method is much beter than breaching
encapsulation and getting and setting the price.So the point is not "don't allow access to the members" (which after all you are still doing, albeit less directly) so much as "make sure that any functionality implicated in working with the members is handled within the object," right? Take your shopping example. Say we live in a country where there is no VAT and the app will never be used internationally. Then we would resort to a simple setter/getter scheme, right? Or is the answer that if the object really is pure data are almost so, then it should be turned into a standard java.util collection instead of a custom class?
Thanks for the help.
Drake

New Laptop w Vista - Need help transfering Palm and other software to Vista

I got a new laptop that runs Vista. My Palm TX has been the Palm and all other software fine on my Windows XP desktop computer.
How do I move all my Palm info over to the laptop without starting a lot of problems.
Will I still be able to sync my Palm on both my desktop Windows XP and my Vista laptop?????
Can someone please give me a step by step guide for this procedure:
Thanks for the help and advoe
JoAnne
Post relates to: Tungsten T3

To sync on your new 32-bit desktop you will need to download the Vista-compatible Palm Desktop 6.2.
You will also need to install Documents To Go v.10 on the new desktop as well...should be fine with Vista. From what I've seen of Beyond Contacts, you will need to upgrade to 3.0083 to gain Vista support. I don't know if that's a paid upgrade or not.
If any of your other third-party apps also have a desktop component or install a conduit for synchronization, you'll need to check with each of them to verify compatibility with Vista and Palm Desktop 6.2.
When you connect to the new computer for the first time after you install Palm Desktop software, just select the TX's current Hotsync ID to sync with, and the data on the TX should automatically migrate into your new installation. But it's always best to be safe rather than sorry. Get a copy of NVBackup (google and download from any legit source such as www.palmgear.com ), and run a complete backup onto a SD card. That way, you'll be minutes away from a full Restore if anything does happen in the transition.
Lastly, if you plan to sync with your two computers, you will need to be careful and only use one of them for full 2-way synchronization, and use the other purely as a clone to hold a copy of the data on the handheld, using Handheld Overwrites Desktop conduit settings on that second computer. Otherwise data corruption is sure to result. This Palm Knowledgebase Article discusses how to Hotsync one device on two different desktops:
http://tinyurl.com/kq4c5
Good luck, let us know how it turns out.
Post relates to: None
Message Edited by smkranz on 01-21-2009 11:14 AM
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android

Help with PS and HDR Effect Pro from Nik

I altready have a help request into Nik Software, but was hoping someone here could offer some suggestions.
I'm running the Nik Complete software program on Win 7 64Bit, Raid 5 machine. 8800 GTS 512 MB card; 12gb of RAM, i7 quad core, 2.67 GH, PS CS5 and Lightroom 3.2, Wacom Intuos 3 tablet.
I have the most updated drivers for video, wacom tablet. OS is current with updates. PS CS5 is updated, but I am NOT running Lightroom's 3.3 RC.
I updated all software updates for the NIK software collection from their site and still have the same problem even after uninstall and re-install.
When I attempt to run HDR Efect Pro I get the menu window to select my images, click ok and with in seconds I get the message that Adobe Photoshop CS5 has stoopped working and must close...
I've gone to their site and looked into their FAQ/troubleshooting and did all their recommendations, update drivers, look for color profiles with 0 Bytes in the system color spool for both 32 and 64 bit apps and still no luck. This also happens with CS4 and CS3 and if I attempt to use the program form Lightroom and Bridge. Any ideas, work arounds, suggestions? Their automatic reply from my support request says 2-3 days due to the high populaity of their program!!!
Thanks for any and all help.

Outside of suggesting some pretty generic things, I can't offer much help... I don't use Nik products myself
You could try disabling the "Use OpenGL Drawing" setting in Photoshop as a workaround to see if that helps. Perhaps between Photoshop and the plug-in problems are being caused in the OpenGL driver for your particular video card.
Also, given that 3rd party plug-ins and Photoshop could be competing for memory, you could try changing the amount of memory Photoshop is allowed to use in the Edit - Preferences - Performance dialog.
Good luck.
-Noel

Help with Etrecheck, continues checking software

I downloaded the Etrecheck software vs 2.0.9 today. The software started checking hardware, then proceeded to check software. It has not moved since. Seems this program is stuck in Checking Software for over 2 hours. Last entry on log shows Checking kernel extensions. Need some help here.
<Image Edited by Host>

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.apple.AirPortBaseStationAgent com.apple.installer.osmessagetracing com.apple.SafariNotificationAgent com.apple.usbmuxd com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper ' ' 879294308 3627668074 1083382502 1274181950 1855907737 464843899 1233118628 2636415542 842973933 891055588 998894468 695903914 1443423563 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { split("'"${p[41]}"'",b);for(i in b) print b[i];if(n<10) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { split("'"${p[41]}"'",b);for(i in b) print b[i]".plist";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' /:/d;/\./p;' '/\.appex\/Contents\/Info\.plist$/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:|suhel| VALI|ver-r|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" 'L*/P*/com.ap*.p*.ext*.*.*t -exec '"${c1[14]}"' :displayOrder" {} \;' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors appexes );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 4 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Newbie Help with videocameras and editing software

Similar Messages

Maybe you are looking for