Newbie here I NEED HELP!!!!!!! 750 (former sprint

HI all I am a newbie I have been trying to figure out how to get pictures off my treo without having Sprint service. I bought a data cord and downloaded sync4.5. For some reason I am not able to get synced up with my computer which is running XP home edition.
I don't have the original disk that came with the phone, do I need that disk? if so I am screwed.
Thanks in advance for any help.
I am located in Elk Grove Ca. if anyone is near that can help.

hmdznrcld wrote:
I bought a data cord and downloaded sync4.5. For some reason I am not able to get synced up with my computer which is running XP home edition.
Does Windows recognize the 750 (i.e., does plug-and-play detect the device)? Does ActiveSync start up, even if sync does not work? In that case, you could try using the Explore button of ActiveSync to copy files from your Treo to your computer. Sometimes you can drag and drop, other times Ctrl+c and then Ctrl+v in the new location works better.
(I've only used a Windows Mobile 6.1 device, but hopefully the 750 supported the Explore feature...)

Similar Messages

Please help!! Newbie here really need help. Numlock, divers, backup, recovery disk

Hi everyone
I finally found where to post
I really wish someone could or would help me
I have a lenovo g550 for about 4-5 years And I was happy with it
few days go I cleaned installed windows Ii got a friend to help infests he put it on the d drive then c drive And c drive gainsaid he formatted my d drive chlorinating on therein was a real unswayable I kind of sorted it out. And I learnt a lot bout the oem partitioning deleted that though. Can someone tell me If I can boot or recover my previous vista from there.?
If not its fine but then I would like to know is can I change the oem partition with the image or recovery (whatever you call it) of the new windows 7 or how to go about creating a recovery disk.
After installing the new windows my PC seems to be fine but I don't know If I kept all the drivers And whatever goes with it. What are all the drivers I need And where do I find If I have them or not. I am not really worried about my data as I want to start fresh.
Another thing I noticed is my number keypad stopped working all of a sudden. When I press the numlock button it beeps and the light does go on and off. When its on it doesn't give me numbers e.g... If I press 5 it actually highlights where the cursor is.
And my mouse/trackpad is not the same as it was before. When I had vista on the right of the trackpad I could use it to scroll up and down and the bottom of the trackpad allowed me to scroll left to right. This function is no longer there. I have to use the arrows to go up and down.
Somebody please help as I do need my laptop for work purposes.
THANK YOU IN ADVANCE!!!

hi any drivers you should need you should be able to get through support drivers&downloads link at top of this sites page bud you could use partition magic to clear all partitions and create new multible one if you wish the rest wait till after you put drivers in and see if probs still exist bud

Newbie here i need help

i just got the droid 2 and im all new to the phone and features i had a blackberry for two years and i was use to that but so far i like the droid i some what know how to do certain things. Now the only problem idk how to do is connect the droid to my mac pro notebook and transfer my music from itunes. i keep getting some code error and it wont download them. idk if im doing it wrong or what im suppose to do?
if anyone could help me i appreciate it i really need music on my phone thats what keeps me entertained on my way to work everyday lol

Hello,
You could use the program Doubletwist on your mac to sync your itunes and download your music and other things to your Android phone. Hope that this helps you out.
--Reginald Prior

Hi! I am newbie to Reports need help with check boxes

Hi! I am newbie to Reports need help with check boxes. I am try-in to make a new check boxes that will validate in runtime. I have created two frames and one frame is dummy and other frame has big X line on it with conditions. Is this a right way to create check box! Please help thanks!

and one frame is dummy and other frame has big X
line on it with conditions. Is this a right way to
create check box! Please help thanks!Instead of creating a frame for X, you can create Ractangle and place X in it. Rest is fine.

Hi newb here , Can anyone help with Port Forwardin...

Hi guys
Newb here on Broadband Option 3 .
New to the world of BTorrents ( hope thats not a dirty word ) and just need some help on Port Forwarding with the Curved Blue Voyager ( latest one I think )
Problem is I can't seem to upload anything back and obviously I dont just wanna leech all the time lol
Thanks in advance
H

First of welcome to BT Community Forums, although your in the help with speed/connection issues section and bit-torrent is nothing to do with BT but i'll still try to help.
downloading a torrent file is one thing but just because you download does'nt mean you need to upload anything if for example your downloading something with say 100 seeders and 15 leechers then you may find that you dont upload anything or very little, thats nothing to worry about at all.
Or
If you've made a torrent and cant figure out why its not uploading it may be due to the fact you need to upload the small torrent file to a p2p site in order for others to see it.
Hope this small insight into the world of torrents helps, but i dont know what else to tell you on this subject.
Kindest Regards
IceZaroth
BT Community Helper

I need help in form 6i

Good morning everyone,
I need help please
someone who has handled expiry of session in form 6i
I am using a library called D2KWUTIL.PLL
and triggers When-new-form-instance and When-timer-expired.
The problem I have is that the screens flash forms text boxes, I realized that this is for the trigger When-timer-expired
and believe that my timer every 1 second, the issue is to control the inaction and close all forms.
Help me if you know another way to handle session expiration.
thanks in advance.

Andreas Weiden wrote:
A way to do it in forms could be this:
-Create a global containg the last time the user did an action.
-Create a form-level WHEN-VALIDATE-ITEM-trigger an let it update that date. (If you want also other actions to be treated as "action", you might add additional triggers, like KEY-ENTQRY and KEY-EXEQRY,..)
-Create a timer, whichs check if the last actiondate in the global is older than you want to allow.
-Make sure that the timer fires as less often as possible.
Personally, i would recommend to not do it that way, because when you "switch" to webforms some day, the timers can/will make problems.thanks for replying,
may be more explanatory
thanks

Need Help w/Form Component

running SJSC2U1 on XP
Need help with using the form and associated components to create a search functionality in a jspf page..
I have used the form component and attempted to use the properties method="get" action="http://www.aaa.com/query.html" name="getit" etc...
I am told (error msg) that these methods, etc. are not valid for the "form" component
Does anyone now how to create a search functionality in a jspf page using components, be it "markup" layoutPanel, Form or whatever..
a simple example (code) would be great.
Thanks

running SJSC2U1 on XP
Need help with using the form and associated components to create a search functionality in a jspf page..
I have used the form component and attempted to use the properties method="get" action="http://www.aaa.com/query.html" name="getit" etc...
I am told (error msg) that these methods, etc. are not valid for the "form" component
Does anyone now how to create a search functionality in a jspf page using components, be it "markup" layoutPanel, Form or whatever..
a simple example (code) would be great.
Thanks

Getting a new iMac - overwhelmed w info here but need help

Hi,
I'm getting a new iMac next week and need help with Blackberry Bold 9000 issues and syncing with iCal, etc on the machine. I have been told that I can buy an app for about $30 that will sync the BB with the mac programs but reading here, I am confused - are some of the posts here and the KB notes related to syncing directly with the mac software or are they only for making a separate BB desktop for the mac?
I have looked at several of the KB notes but I haven't found the answer yet.
thanks.
marcelcat
Bold 9000 owner since Feb 2009

What’s the difference between:
8GB 1066MHz DDR3 SDRAM - 4x2GB http://Add $200.00...
(from 4GB 1066MHz DDR3 SDRAM - 2x2GB)
and
8GB 1066MHz DDR3 SDRAM - 2x4GB http://Add $600.00
4GB DIMMs are at present significantly more expensive than 2GB DIMMs. It's your choice whether to pay the extra money and have empty slots available for additional future memory expansion (without removing any existing memory).
I presume 2.8GHz Quad-Core Intel i7 is bigger, or more powerful than the 3.33GHz Intel Core 2 Duo of the 21.5” iMac model. Correct?
Generally yes. You can see benchmarks on places like Barefeats if you want to see comparison numbers.
it appears the CD/DVD problem thing is not evident in the 27” model as it at least was in the 21.5” model. Right?
I can't add anything to what I said on the subject previously.
cracked screens upon opening the box of the new computer, were much more of a problem for the bigger, 27” models that the 21.5” models. Hopefully, Apple has taken care of that by packaging them more carefully.
I haven't seen a report of any cracked screens in several weeks now. But with the gorillas the shipping companies tend to use, there are no guarantees. I once received a pallet-load of computers that the trucking company had driven a forklift blade through. So you never know how your computer might arrive. The prevalence of problems seems to have been alleviated, though.
Regards.

New here and need help with design

Hello all, I am working on my son's first birthday thank you cards. I need help removing the line in between the blue and green background. Thanks. Stacey

You also have a narrow black line on the lower left side.
Increase the the magnification to 500% and select the black and the white lines with the Magic Wand (Continuous checked). Feather by one pixel. Sample the green right under the white line, make it the Foreground Color and fill the selection with it.
Juergen

Need help with form calculations

I'm converting a non-editable PDF form into an editable one and could use some help as I'm am new to this. Note: I did not create the non-editable form, It's a form I downloaded and use in my business.
I already figured out how to create text fields in the already created PDF non-editable form, now I'm trying to add in calculations. I can create the (value is the) calculations between 2 or more text fields, but now I need to multiply one text field by the number 3 and have the answer show up in another text field.
Example:
I'll use the letters A & B for the text filed names in my example.
I have text field A calculating the sum of other text fields using the (value is the sum of) option under the (calculate properties box.)
Now I want text field B to multiply text field A by a fixed number of 3. (A=24) x 3=72. I need text field B to have the answer of 72 in it.
I need text field B to always multiply text field A by 3.
Does anyone know how I can accomplish this?
I'm using Adobe 8 Pro.
Please note that I have no experiance using custom calculation script if that is the only way this will work and will step by step instruction on how to write the code.
Thank you very much.

You can use the simplified field notation option. In this case, you'd enter:
3 * A
Where "A" the the exact name of the A field. It is best to avoid spaces and any other special characters for any fields that you'll want to include when using simplified field notation option.

Need Help on Forms Personalization

Hi All,
I am doing personalization on Sales Order Form.When i select Order Type as 'Mixed' i have to display salesperson as "No Sales Credit" in the form.But when i click on lov of salesperson field it is giving list of values. But i need only one item in the list i.e "No Sales Credit" when i select order type as 'MIXED'.For this i am trying to restrict lov of salesperson through Create Record Group from Query Built-in.But where can i put condition as Order Type as 'Mixed' in that personalization.
Can anyone please help me out.
Is there any posssible way to do this.
Thanks in advance,
Dhanasurya

Hi DhanaSurya,
First, you need to put 'Order Type' as Mixed in the Query Where clause of 'Create Record group from Query', and then you need to atatch a new Record group to the LOV with property:
Object Type: LOV
Target Object: <OLD LOV ON FORM>
Property name: GROUP_NAME
Value: 'customized Record Group Name'.
Regards,
Kiran

HT4436 My mom has lost her iphone - need help finding it

My Mom has lost her iphone, and I think she had the "find my iphone" turned on, but I can't seem to get an icloud account set up for her. Help!

If she had 'Find my iPhone' turned on she must have an iCloud account; you would need to sign into that at http://icloud.com and go to the 'Find My iPhone' page.
If she doesn't know what the ID is, go to http://appleid.apple.com and click 'Find your Apple ID'.
If she knows the ID but doesn't know the password, go to http://iforgot.apple.com and sign in with your iCloud login. A new password will be sent to your associated email address. If this doesn't work you will have to contact Support. Go to https://getsupport.apple.com; click' See all products and services', then 'More Products and Services, then 'Apple ID', then 'Other Apple ID Topics' then 'Lost or forgotten Apple ID password'.

Newbie to mac - need help with idvd

heya people.
i'm hoping someone can help me with my problem i have created a dvd using i dvd 6 with the one step dvd once it finished burning it ejected the dvd. however i accidentally closed the software. and i can't seem to find where its put the temp files it recorded to the HD when recording the movie, now i've only got a small hard disk space left because this was a rather long movie and i'm not liking the fact that with everything ese i have on here i only have 5 gb of space left.
can anyone please tell me how to get rid of these temp files it would have created because i did a search and can't find a single file over 2gb on my hd yet i know the file is over 7gb in size. please anyone that can help it would be much appreciated. as i say i'm a newbie to macs only having this MBP for a few weeks, oh and i have bootcamp installed as well... ok ok i know tis wrong having windows on a mac but its for some software i have to use at work that isn't compatible with OSX. so please please please help me if you can.
many thanks
Danwilliams

the best thing about macs are they are so obvious when you know what you are doing with them!
Would someone please put that sentence in flashing lights at the top of every forum here!
Dan:

Help - Newbie Mac user needs help removing malware in Safari

I've tried researching this but I haven't found exact steps on how to get rid of different website popping up in my Safari browser. I'm a little gun shy with deleting files, etc on the Mac so I hope you can help me fix this. Or better yet, is there software that will fix it?
Thanks in advance for your help.
Wendy

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/d;/(etc|Preferences)\//s/^\.\/[^/]+//p;' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' BEGIN{FS="= "} /Name/{print $2} ' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / /{$0="'"${p[28]}"'"};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' 's/0/Off/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,[lps]*.conf,pam.d,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}* .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D23 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;D12 26 48 59 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with "Model Identifier." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Need help in forming a query

Hi All,
I have a table with the following data:
col1 co2 col3
1 A 5
2 B 3
3 C 3
4 A 2
5 A 5
6 D 2
7 C 1
8 C 6
9 A 7
I will explain my requirement by considering above data.
1) I want to get the sum of col3 values.
2) I should consider only the rows which are in between "A" and "C" - (here A & C are referring to col2 values).
(i.e,
1 A 5
2 B 3
3 C 3
5 A 5
6 D 2
7 C 1
) - If there are multiple A-C combination then consider only the innermost.
3) from the above set i should get the sum of col3 values by considering only the values of last A-C combination rows.
(i.e,
5 A 5
6 D 2
7 C 1
final sum is: *5+2+1 = 8*
result is 8
If no such A-C combination is present then i should get "0" as the sum.
Please help me..
I have Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - 64bit Production
Thanks,
Girish G
Edited by: Girish G on Aug 2, 2011 1:56 AM

Oh, and to cater for there being no A to C in the data returning 0, just wrap the result in an NVL statement...
SQL> ed
Wrote file afiedt.buf
1 with t as (select 1 as col1, 'A' as col2, 5 as col3 from dual union all
2             select 2, 'B', 3 from dual union all
3             select 3, 'D', 3 from dual union all
4             select 4, 'A', 2 from dual union all
5             select 5, 'A', 5 from dual union all
6             select 6, 'D', 2 from dual union all
7             select 7, 'F', 1 from dual union all
8             select 8, 'G', 6 from dual union all
9             select 9, 'A', 7 from dual)
10 --
11 -- end of test data
12 --
13      ,a as (select max(col1) col1
14             from t
15             where col2 = 'A'
16             and exists (select 1
17                         from t t2
18                         where col2 = 'C'
19                         and   col1 > t.col1)
20            )
21      ,c as (select min(t.col1) as col1
22             from t, a
23             where t.col1 > a.col1
24             and   t.col2 = 'C'
25            )
26 select NVL(sum(t.col3),0) as col3_sum
27 from   t, a, c
28* where t.col1 between a.col1 and c.col1
SQL> /
COL3_SUM
         0

Newbie here I NEED HELP!!!!!!! 750 (former sprint

Similar Messages

Maybe you are looking for