NEWBIE: Inserting FLASH. Problem:(
Greetings. I was wondering if anyone could steer me in the
right direction. I inserted a flash file (swf) into a dreamweaver
page. I then previewed the page and the Flash piece played fine.
I then put the html page on my server, and put the flash file
in my images folder (also tried putting it in it's own folder &
with the html pages) but when I try and view the page containing
the Flash piece it never loads, I just get a big white box where
the piece should be.
I'm just trying to find out what I'm doing wrong. I've done
the same thing with Flash banners I've created and had no problems
(granted they were smaller than the file in question)
Any info would be greatly appreciated. Thank you!
ACE:)
If you inserted the file using DW8.02 then you also need to
load the scripts
folder to the server
Paul Whitham
Certified Dreamweaver MX2004 Professional
Adobe Community Expert - Dreamweaver
Valleybiz Internet Design
www.valleybiz.net
"Ace612" <[email protected]> wrote in
message
news:erdmgl$rr4$[email protected]..
> Greetings. I was wondering if anyone could steer me in
the right
> direction. I
> inserted a flash file (swf) into a dreamweaver page. I
then previewed the
> page
> and the Flash piece played fine.
>
> I then put the html page on my server, and put the flash
file in my images
> folder (also tried putting it in it's own folder &
with the html pages)
> but
> when I try and view the page containing the Flash piece
it never loads, I
> just
> get a big white box where the piece should be.
>
> I'm just trying to find out what I'm doing wrong. I've
done the same thing
> with Flash banners I've created and had no problems
(granted they were
> smaller
> than the file in question)
>
> Any info would be greatly appreciated. Thank you!
>
> ACE:)
>
Similar Messages
-
Inserting Flash Problem no ID in the object tag
Notice the id property in the object tag.
<object
classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000"
codebase="
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#ve
rsion=7,0,19,0" width="550" height="400" id="source2">
Well Contribute is not inserting this tag. Therefore the
flash movie will not
run the folowing (Flash Action Script):
import flash.external.ExternalInterface;
theURL = ExternalInterface.call("getLocation");
Anyone know what to do?this post already this repeating with this goes 2 times in
that link is the same post
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?catid=303&threadid=1162346&en terthread=y -
I am using Dreamweaver CS4.
I am attempting to put a Flash Video (.flv) file on a standard HTML page in Dreamweaver.
When I either click the Insert Flash Video in the Common tab on the Dreamweaver toolbar, or if I choose Insert > Media > FLV to inert the video, I get the standard Dreamweaver FLV interface. I make my choices, click OK, and when the video is place on the page, I get the following dialog box:
"While executing inspectSelection in flvProgressive.htm, a JavaScript error occurred."
with an OK button.
If I preview the page, all that loads are the various buttons of the skin that I have chosen and no video.
Anyone have an idea what is going on?
maylandmacAre you sure you aren't working with a template driven page?
When you insert media files into DW, it must write code in the <head> tags to reference Scripts necessary for Flash media to work on the web.
If you're working with a page that was created from a Template, the DWT page must have editable regions in the <head> tags, or you won't be able to add media to your web pages.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb -
Hi all,
I know this question has been asked before, but I've tried
all the solutions offered and none worked.
I am using the command "Insert -->Flash Video" to insert a
video on a web page (using DW8). Plays locally, but not after
upload. Scripts folder and both the skin and
FLVPlayer_Progressive.swf file are uploaded to the appropriate
places. I've tried on multiple computers and in multiple browsers
and can't figure why it won't work.
Here it is on a
test page. Should play in box and flv file is only a little
over 1MB.
Any suggestions would be very appreciated. I'm ready to pull
my hair out.
Thanks in advance.Guessing here but, is there supposed to be a blabla .flv file
on the server
or in your code?
"ptvsavant" <[email protected]> wrote in
message
news:f8df88$dn2$[email protected]..
> Hi all,
> I know this question has been asked before, but I've
tried all the
> solutions
> offered and none worked.
>
> I am using the command "Insert -->Flash Video" to
insert a video on a web
> page
> (using DW8). Plays locally, but not after upload.
Scripts folder and both
> the
> skin and FLVPlayer_Progressive.swf file are uploaded to
the appropriate
> places.
> I've tried on multiple computers and in multiple
browsers and can't figure
> why
> it won't work.
>
>
http://channel2.org/test/new07/vidtest.html
Should play in box and flv
> file is
> only a little over 1MB.
>
> Any suggestions would be very appreciated. I'm ready to
pull my hair out.
>
> Thanks in advance.
> -
Insert Flash not working in Presenter 7.0
Hi
I've been using Presenter for a while without any problems. I've recently had to install the Tech Comms Suite (2.0) onto a new laptop though and now I cant insert flash into my slides. All that happens is that the systems moves focus to any of my other windows.
Anyone out there help?
I'm using Office 2003, XP and full Tech Comms Suite v2
Nick.I think I found a fix.
http://www.adobe.com/support/downloads/product.jsp?product=153&platform=Windows
Even though the Adobe updater said I had the most up-to-date version of the software it was lieing. I had to go and apply all patches from 7.0.1 onwards. This seems to now allow me to insert flash again.
Thanks for the posts and I hope Adobe sort this app out, not being compatible with Captivate 5 or AS3 is not good.
Regards,
Nick. -
Unknown error when inserting Flash text [was: Error]
When I try to insert Flash text into a document, I keep getting an error message that says "Unknown error". What should I do? I'm taking a class online and we happen to be covering this feature.
After nearly ripping my eyeballs out and chucking my laptop out the window, I finally fixed the problem!
For some reason I didn't have a CMaps folder in my Adobe - Common Files - Font folder:
C:\Program Files\Common Files\Adobe\Fonts\Reqrd\CMaps
So I made the "CMaps" folder and copied and pasted the files "Identity-H" and "Identity-V" from an "Adobe Reader" CMap folder, and now I can save text in an *.ai file with PDF Compatibility checked.
It's pretty strange Illustrator was working for 2 years without this folder, and now all the sudden it needed it. Also, this is a very obscure fix.
Hopefully the programmers at Adobe have fixed these bugs in newer versions. -
Insert flash video? Won't play
Any tips on inserting Flash video into a project in Captivate 4?
I can get video to appear an play in Preview, but after publishing, the video doesn't appear and the slide forwards.
(Also, there seems to be a conssitent problme where preview is inaccurate.)The videos are in the same folder as the project, and they appear in the published folder.
Tried path 2 ways:
myvideo.flv
/myvideo.flv
Neither made a difference.
There are 3 videos on this slide --- could that be a problem? -
When I try to Insert Flash Buttton, I am now getting the
following error message:
While executing object Tag in Flash Button.htm, the following
JavaScript error(s) occurred:
At line 205 of “C:\Program Files\Macromedia
Dreamweaver MX
2004\Configuration\Shared\MM\Scripts\CMN\DOM.js”: Exception
thrown in native function.NNTP.hk - (^(oo)^)
http://www.nntp.hk/web/
"anolte" <[email protected]> wrote:
> When I try to Insert Flash Buttton, I am now getting the
following error
> message:
>
> While executing object Tag in Flash Button.htm, the
following JavaScript
> error(s) occurred:
>
> At line 205 of ?C:\Program Files\Macromedia
> Dreamweaver MX
2004\Configuration\Shared\MM\Scripts\CMN\DOM.js?: Exception
> thrown in native function.
>
>
>
I have the same problem... have you had any luck finding a
way to fix it?
Jax -
Can only select English font when insert flash media
I am using Windows XP SP2 Chinese version and installed
Macromedia Studio 8, but I found a big problem when I using
Dreamweaver 8. When I insert flash media by (Insert -> Media
-> Flash Text or Flash Button), I cannot select Chinese font.
But if I insert general text, I can select chinese font.
Please help me to fix the problem. Thank a lot.Saiman23 wrote:
> I am using Windows XP SP2 Chinese version and installed
Macromedia Studio 8,
> but I found a big problem when I using Dreamweaver 8.
When I insert flash media
> by (Insert -> Media -> Flash Text or Flash
Button), I cannot select Chinese
> font.
Flash media works only with TrueType fonts. This restriction
applies to
all languages, including English.
David Powers, Adobe Community Expert
Author, "The Essential Guide to Dreamweaver CS3" (friends of
ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/ -
I finally started getting comfortable with Breeze and
publishing to the web. But now I wanted to insert an .MOV. I ran it
through Flash to convert it to .swf and put a skin on it. Then I
used 'Insert Flash' from the Adobe Presenter menu. It works fine
when I viewed it using slide show, but when I published it to my
computer the .swf slide came up with a small flashing symbol and
the movie never appeared.
When I sent the ppt to a friend who has the same programs he
could not even view it with slide show.
I am using Flash version 9 from Adobe CS3 and Powerpoint
2003.
Any help would be greatly appreciated.
Thanks, WinegrapesWinegrapes,
When you convert your file to SWF do it to Flash Player 6 or
7. This should solve the problem.
Also, getting presenter 6.1 may help
Jorma@RealEyes -
I have been trying to insert flash file but I keep getting error messages that
Not Found
The requested URL /annimations/Snow.html was not found on this server.
Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request.
I firstly publish flash into both swf and http files.
Then, I opened view source of the http file and pasted the code onto the dreamwaever file.
<object classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=10,0,0,0" width="700" height="500" id="Snow" align="middle">
<param name="allowScriptAccess" value="sameDomain" />
<param name="allowFullScreen" value="false" />
<param name="movie" value="Snow.swf" /><param name="quality" value="high" /><param name="bgcolor" value="#ffffff" /> <embed src="Snow.swf" quality="high" bgcolor="#ffffff" width="700" height="500" name="Snow" align="middle" allowScriptAccess="sameDomain" allowFullScreen="false" type="application/x-shockwave-flash" pluginspage="http://www.adobe.com/go/getflashplayer" />
</object>
In addition, I deleted code that swfobject.registerObject(FlashID) on the http file.
The dreamweaver gave an error message that the code swfobject.registerObject(FlashID) can cause error when downloading the flash.
Finally all http, swf and flash files were uploaded.
But I still got the error message above.
In the past, I managed to upload flash using the method above, although I did not get any message regarding swfobject.registerObject(FlashID).
Could someone help me and point out what went wrong?Based on the error message the problem has to do with an html file, not an swf file.
-
Insert Flash with Dreamweaver CS3 Question
So I have been building websites for awhile and have always relied on the built in insert flash object that came with dreamweaver as I have never had issues with it.
However as I finished a site recently the client had a friend look at it and brought up the red flag that the site was not w3 compliant. So I go and look at the little tool they have and the only error that comes up is related to the insertion of flash on the page.
I googled it a bit and found a number of people saying that the insert flash through dreamweaver will no show up as compliant. A couple solutions to fix the problem.
But before I go down that road, I want to ask. ...Does it really matter here? Seems like Dreamweaver insertion would be compliant? I mean come on the link that the w3 give to fix the problem is a link from a fix created in 2002.
I have never heard of anyone saying no the flash does not show up so right off I am not terribly concerned but it would be nice to know..
Also if it is important and suggestions as to a nice fix to the issue would be great.
Thanks for your time,
ChrisRight you are!
I tend to spot check pages and haven't done a W3C check on a flash embed in my websites (apparently). Just did one pursuant to your question. The page is 100% compliant without the Flash video. has 51 errors, 35 warnings with it. Lots of those errors are Adobe-generated Javascript that handles the flash video insert, skins it and so on.
Here is where Adobe may not be compliant with the W3C. -
I am using CS3 and trying to insert a .flv file that is on a
remote server and I keep getting this error:
/Scripts/ - error occurred - Unable to create remote folder
/Scripts/. Access denied. The file may not exist, or there could be
a permission problem. Make sure you have proper authorization on
the server and the server is properly configured.
Scripts\AC_RunActiveContent.js - user cancelled
The file exists and I have permission to access it. I can't
figure our why because I can upload the .mp3 files that are in the
same folder as the .flv file without a problem.
code:
<object
classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=8,0,0,0"
width="176" height="132" id="FLVPlayer">
<param name="movie" value="FLVPlayer_Progressive.swf"
/>
<param name="salign" value="lt" />
<param name="quality" value="high" />
<param name="scale" value="noscale" />
<param name="FlashVars"
value="&MM_ComponentVersion=1&skinName=Clear_Skin_1&streamName=media/Introduction&autoPla y=false&autoRewind=false"
/>
<embed src="FLVPlayer_Progressive.swf"
flashvars="&MM_ComponentVersion=1&skinName=Clear_Skin_1&streamName=media/Introduction&aut oPlay=false&autoRewind=false"
quality="high" scale="noscale" width="176" height="132"
name="FLVPlayer" salign="LT" type="application/x-shockwave-flash"
pluginspage="
http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash"
/>
</object>
Thanks in advance for your help!When you insert flash into DW pages, DW creates a folder for
you in the root
called Scripts with the AC_RunActiveContent.js file in it.
This JavaScript
enables ActiveX content to run without sending up nag alerts
to visitors.
Since your web page is looking for this file, you need to
upload the Scripts
folder to your server.
--Nancy O.
Alt-Web Design & Publishing
www.alt-web.com
"Ehd24" <[email protected]> wrote in message
news:[email protected]...
> I am using CS3 and trying to insert a .flv file that is
on a remote server
and
> I keep getting this error:
>
> /Scripts/ - error occurred - Unable to create remote
folder /Scripts/.
Access
> denied. The file may not exist, or there could be a
permission problem.
Make
> sure you have proper authorization on the server and the
server is
properly
> configured.
> Scripts\AC_RunActiveContent.js - user cancelled
>
> The file exists and I have permission to access it. I
can't figure our
why
> because I can upload the .mp3 files that are in the same
folder as the
.flv
> file without a problem.
>
> code:
>
> <object
classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000"
>
codebase="
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.ca
b#ve
> rsion=8,0,0,0" width="176" height="132"
id="FLVPlayer">
> <param name="movie"
> value="FLVPlayer_Progressive.swf" />
> <param name="salign" value="lt" />
> <param name="quality" value="high" />
> <param name="scale" value="noscale" />
> <param name="FlashVars"
>
value="&MM_ComponentVersion=1&skinName=Clear_Skin_1&streamName=media/Introdu
ctio
> n&autoPlay=false&autoRewind=false" />
> <embed src="FLVPlayer_Progressive.swf"
>
flashvars="&MM_ComponentVersion=1&skinName=Clear_Skin_1&streamName=media/Int
rodu
> ction&autoPlay=false&autoRewind=false"
quality="high" scale="noscale"
> width="176" height="132" name="FLVPlayer" salign="LT"
> type="application/x-shockwave-flash"
>
pluginspage="
http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Ve
rsio
> n=ShockwaveFlash" />
> </object>
>
>
> Thanks in advance for your help!
> -
Flash problem persists after 6 months...does this new information help?
Hi All!
I posted my problem almost 6 months ago, (I'll paste some of the info below to bring you up to date), but I STILL can't access only FOUR sites because I get a "Plugin file is missing" error, (after my previous post I found 2 other sites). I've been trying to solve this problem off & on, but I got more dedicated the other day because I'll be needing access to these sites very soon. I found some new information today that I hope will solve this awful problem; however, since I'm not very technically inclined I know I have to ask a "Flash Expert", so here goes....
I run Windows 8 & I use Mozilla exclusively. I updated Flash the other day to version 15.0.0.152 & I wanted to make sure the plugins had been updated, so I opened the "Flash Player Settings Manager" & under the "Advanced" tab it lists:
NPAPI Plugin Version 15.0.0.152
PPAPI Plugin Version Not installed
Is it significant that the PPAPI Plugin is "Not installed", or does Mozilla only require the NPAPI plugin?
My second question regards the installation of Flash. I know that when a program is problematic, it sometimes helps to uninstall & reinstall it...I recently had a game that went nuts & that's the procedure I had to do. Also, someone on Mozilla's forum said they were having a Flash issue & they went to your site & downloaded the .exe AND the .msi Installers from the Distribution Page, then manually installed them & their problem was resolved. Would this help me resolve MY Flash problem? If you think it's worth a try, do I have to uninstall Flash first?
Well, that's all the new info I have. I have to figure this out before December because that's when the nest-cam comes back on...I really have to get this problem fixed! I'll paste my previous post below, but I hope the uninstall/reinstall method will be the answer!
Thanks in advance for your help!
Best Regards,
DogPal
Here's my previous post:
Flash 13.0.0.214 does NOT work on some sites, but works fine on all others in Using Flash Player
Hi!
I watch several wildlife nest-cams every day running Windows 8 using Firefox 29.0.1, but yesterday morning, (after I'd already watched the 6 cams I view every day), I started getting a solid, black screen with, "Error loading plugin: Plugin file not found", on TWO of these sites.
My attempts to resolve the problem were:
1. Checked all the other web-cam sites I view daily, and there's only a problem on 2 of them.
2. Went to You Tube, Facebook & other similar sites and I can view streaming media.
3. Refreshed pages-when that didn't help, I closed & reopened Firefox & still 2 sites with "plugin loading error"
4. Completely shut-down my laptop & rebooted.
5. Did "System Restore" to earlier in the day when ALL web-cam sites were working.
6. Went to Adobe Flash site & verified that I had the most current version...I do, & I saw the animations on Flash site.
7. Verified my Flash Plugins in Firefox...AGAIN...they're all activated & up-to-date
8. Checked & re-checked ALL the web-cam sites I view every day, (for, at least the 10th time), and the
same 2 sites are still showing the "Error loading plugin: Plugin file not found" on a black screen. Even
though the video isn't seen the "chat" area is functioning, (I don't know if that's important, but I
thought I should mention it).
9. I posted the issue on Firefox's Forum but no one has an answer since Flash works everywhere except
for 2 sites.
I've tried everything I can think of to troubleshoot this, but as you can see, I've had no success in solving this "mystery".
As for the 2 sites I can't view, they are:
http://www.pixcontroller.com/eagles/ And
http://www.westmorelandconservancy.org/BlueBirdWebcam-1.htm
I've been watching these sites for MONTHS, so why I can't view them all of a sudden, well, I'm clueless, (I guess you already figured that out...ha ha ha). I was watching the 2 sites listed above early yesterday morning, then when I looked at one of the other cams I view and came back to these 2 sites, I got the "error message".
I hope you have a solution for me, as I'm desperate! I'm WAY behind in my documentation for these 2 sites, so hopefully you'll have an easy answer. If it's a technical thing, please use LOTS of details, as I'm not very technically inclined.
Thanks in advance for your help!
Best Regards,
DogPal
P.S. I just checked on another site that offers many different wildlife cams, & I CAN view the "Pittsburgh Bald Eagles" if I go through: http://www.ustream.tv/channel/pittsburgh-bald-eagles I'm sure this means something, but since I don't understand this technical stuff I don't know what that is! (I told you I'm clueless!)I definitely see a problem with the pixcontroller/eagles site on Windows 8.1. It works fine for me in the same version of Firefox on Windows 7. It's unclear to me whether it's a Firefox or a Flash Player issue, but I'm happy to look into it further and get some bugs filed.
As a temporary workaround, both sites work fine with Google Chrome and Internet Explorer. -
Flash problem after software update (on 10.6.8)
I'm having flash problems on *some* macs after one of the recent software updates (june 2012).
On my school's 10 iMac's (2010), I can't play flash games anymore *in safari*. Chrome is ok.
An example site, is http://www.barryfunenglish.com/games.php (select any game)
But on my school's 6 MacBook Pro's, I can - both safari and chrome.
It was working 2 weeks ago on all computers.
I'm using Software Update server from our server to update all the macs, so it's possible there was an update problem.
Why is flash missing on the 10 imacs safari? But not on the macbook pros?AppleJason wrote:
so did Apple uninstall flash on safari with it's latest update? do you know the reason?
Yes, it was blacklisted by Adobe for security vulnerabilities. OS X now checks to make certain you are running a safe version and disables it if you aren't.
With the latest update, you now have the option of having Adobe doing a "Silent Update" in the background without your having to do anything. I would recommend you implement it.
Maybe you are looking for
-
Is adobe photoshop elements 2.0 still worth ?
I couldn't afford to buy the latest version of photoshop elements so I went ahead and got me this 2.0 version but after a few attempts I can not install it in my windows vista PC...please help
-
i guess i'm trying to find out how to Back up all my Photos manually ( or other ways ) as i use the camera and videos everyday and many , many ......i don't understand the concept of " Backup to icloud " but i think i could free space in iCloud by ju
-
Lightbox 2 -size & position of image
By default, the new image opens in the centre of the page and is cropped to a default size. How can I adjust the code so that it opens at a specific location and expands to specific size, please? I want to use the code for single images of same size
-
ECC6: export ALV to 'Excel (in MHTML format)
We have just upgraded to ECC6. When I try to export ALV to 'Excel (in MHTML format) I get a runtime error (GETWA_NOT_ASSIGNED). My list has 2 quantity fields. Tracing the error in the dump, i notice there is failure when processing quantity fields wh
-
Empty shell for loading content error #1084
I am trying to load one swf into another. In the former I have a preloader, and a mc to load the content. I am getting "Scene 1, Layer 'actions', Frame 1 1084: Syntax error: expecting rightbrace before end of program." Here is my code. import flas