Newbie issue - swf (accessing wsdl) only works from bin-debug

I have a Flex project accessing a CFC Webservice.
When i try to run it or debug it or put it on the server (swf), i get zero - it just waits for the web service and returns nothing.
BUT!  when i click on the swf in the bin-debug, it actually works - i get the data back from the webservice.
I tried copying the whole dir to another spot - and it doesn't work.
Any ideas on this one?!

Update:   Found this post and tried adding local and webservice URL to Flash player 'safe sites' but no go.
http://stackoverflow.com/questions/1454038/flex-application-works-in-bin-debug-but-not-in- bin-release

Similar Messages

  • Printing only works from one computer

    I have an Epson Stylus C60 connected to the USB port on my Airport Extreme. There are two computers on the network, a PowerBook G4 and a MacBook Pro. Both computers connect to the network very reliably and have internet access. The problem is that the MBP cannot print to the connected printer. The G4 has always printed fine.
    The MBP sees the printer as a Bonjour printer, and I can add it to the printer list without problem. When I try to print, I get a message in the print queue that there is a communications error with the printer.
    In the airport configuration window, the printer is recognized and remote printing is enabled. Any idea why printing only works from the G4?

    Thanks for your help. Yes, the driver is a universal binary and the printer works great when plugged directly into the computer. I just can't figure out why it won't work over the airport.
    Any other ideas?

  • Content deleted from bin-debug on launch

    In Flex Builder 3 in a project part of the content, which is copied from the src directory to the bin-debug directory, is removed after launching the project. When I clean the project all data (swf files etc.) are copied to the correct locations in bin-debug, but after I change any single line of code Flex Builder removes all files from bin-debug and only partially copies the files from the src directory. Behaviour isn't consistent, sometimes folders are partially copied, sometimes nothing from a folder is copied.
    What could this be?

    I figured it out a sollution it is quite simple.
    1) Connect your iPad to the computer and go to iTunes.
    2) Select your iPad from the devices list
    3) Select the iTunes U tab at the top of the screen.
    4) Make sure you have Sync iTunes U checked
    5) Make sure you are automatically syncing the files you want.
    Personally, I only do one course at a time and want all the videos for that course.  I prefer to include all the files of a selected course, but you could use any settings.  I think the default is to include all unplayed items for all courses.
    AFter verifying the above, it should not delete your videos on sync because it will actually sync them.
    I figured this out after one of my video downloads stalled and I was told that the videos are actually managed by iTunes, not iTunes U.  I hope this solves the problem because it solved mine.

  • Load a swf-access network only

    I have created a main swf which can access local files only
    to load another swf that can access network only;
    the two swf are all in local,when I test it in Flash CS3 ,it
    is OK;but when play the main swf in my computer ,it can not load
    another swf file(access network only) ,thanks for your help!

    Im trying to accesing to the functions of Slide4.swf in http://b.elementfx.com/  from other server, in the same server i call the functions and it works, but it doesnt from other.

  • BPC Report emails only work from server (not client) - BPC v5.1

    Hi all.
    Hope someone might have seen something like this before.
    Basically, I setup our servers to send email from BPC about 3 weeks ago.
    (NB - If it makes a difference, we use Lotus Notes via a Domino server)
    The SMTP settings are all correct in BPC WebAdmin, the servers have been added to the allow list on the mail server and the port is open.
    Anyway, when I try to send mail from a client (using the Offline Report Distribution Wizard), I get the following error:
    "The transport failed to connect to the server".
    At SAP's suggestion, I ran a test by installing Office and a BPC client directly onto the Web Server.
    When I ran the wizard from the server, the email sent perfectly.
    The problem I have now is that although I informed SAP of the test outcome, I haven't heard anything back in about 3 weeks, and I really need to get the reporting email system up and running properly.
    Does anyone have any suggestions on what could be causing this?
    It's as though the system is telling the client to send the email itself, via the forwarding server, but this would mean allowing every user PC to access the mail server.
    Hope you can help, but thanks for looking either way.
    Craig

    Hi Ludovic
    The problem turned out to be mail server white-lists, due to the way that BPC sends emil.
    Although you setup the email account/profile on the server, it actually sends from the client PC of whichever user makes the email request.
    Our system is only configured to block all email requests with individual exceptions (ie a White-List).
    It needed the PC of every user who would need to send email from the BPC system to be added to the white-list.
    This is why it worked from the server, as we had added the server address to the list as part of the testing.
    Not reall y a BPC problem, more of an issue with functionality due to the method that it uses to send the messages.
    Hope that helps
    Craig

  • Strange issue with external monitor, only working when external speakers plugged in (using Thunderbolt to VGA adaptor)

    Hey – I am having a very strange issue with my external monitor; where it only works if my external speakers are plugged in and connected.
    I am using a late 2011 Macbook pro, running Mavericks 10.9.4, along with an MBox 2 (USB Audio Interface), and two powered speakers (KRK Rokit 5). This setup has had no issues. I have just acquired an external monitor (Benq T2200HD), which I am using with a thunderbolt to VGA adaptor (a cheap Chinese knockoff adaptor).
    To start - I plugged the monitor in with the thunderbolt adaptor, and it powers up and works fine. However, there is a nasty buzz coming from the speakers. I did some research and it looks like a simple ground loop issue. I did a bit of troubleshooting, and this is where things get weird.
    What I found is - If I unplug the MBox, the monitor loses signal from the computer (displaying ‘No Signal Detected!’). Further, if I keep the MBox plugged in, however unplug both the cables from the MBox to the speakers, the monitor loses signal. It doesn’t matter if the speakers are turned off, however they need to be plugged in (or the monitor loses signal). Weirder still, I can unplug the MBox, however the monitor will work if I plug in the speakers through my macs headphone jack.
    Simply put, the monitor only works if there is a direct connection between the computer, the speakers, and the power source.  What is going on here? Is the monitor grounding through the computer port, to the speakers (I don’t know how this works, is this possible?). Could it somehow be the cheap VGA adaptor I am using?
    Some other information:
    - Everything is plugged into the same multi-box for power. I have tried plugging things into separate sources, and the result is the same.
    - If I unplug the thunderbolt adaptor, then the speaker noise disappears straight away.
    - The ground noise doesn’t appear in my headphones, which are plugged into the MBox.
    Any information would be great – am I missing something here, or is this genuinely weird?

    Well, I went back into Best Buy to test on 3 other laptops (2 Asus, and their floor model for this Sony). It seems to be doing the same problem so at least I was able to rule out broken hardware issue on my particular laptop.
    Here's what I did to test:
    Since I couldn't really install Adobe Premiere on their machines, I used the DVIO software (http://www.carr-engineering.com/dvio.htm) and a 5 min clip I captured.  I transferred onto their machines, hooked up my Sony D8, and attempted to play the video.  It would play for 15 seconds and then stop and jitter with a loud noise (like it does on my laptop).  I even tried changing each machine's firewire driver to the legacy one and same results.  I pulled a brand new 4 pin to 4 pin firewire cable off their shelf and still the same problem.
    I think I've nailed it down to Win7x64 bit Home Edition not playing nice with Firewire driver.  Very annoying.  I can't find any concrete evidence of this from other users on any of the forums that have my particular problem, but from my own testing, it's all I can conclude.
    I have 2 other things I can try:
    1.  Opening the laptop and looking at the firewire to maybe find appropriate driver (ugh, I don't want to have to open this thing up).
    2.  Upgrading to Win7x64bit Pro and possibly testing with XP on the new MS Virtual PC (http://www.microsoft.com/windows/virtual-pc/).  I can't do it with my Home edition apparantly.
    Who needs to view video on an external TV anyways....sheeesh...(scarcasm).
    Tim

  • Strange issue with external monitor, only working when external speakers plugged in

    Hey – I am having a very strange issue with my external monitor; where it only works if my external speakers are plugged in and connected.
    I am using a late 2011 Macbook pro, running Mavericks 10.9.4, along with an MBox 2 (USB Audio Interface), and two powered speakers (KRK Rokit 5). This setup has had no issues. I have just acquired an external monitor (Benq T2200HD), which I am using with a thunderbolt to VGA adaptor (a cheap non-apple adaptor).
    To start - I plugged the monitor in with the thunderbolt adaptor, and it powers up and works fine. However, there is a nasty buzz coming from the speakers. I did some research and it looks like a simple ground loop issue. I did a bit of troubleshooting, and this is where things get weird.
    What I found is - If I unplug the MBox, the monitor loses signal from the computer (displaying ‘No Signal Detected!’). Further, if I keep the MBox plugged in, however unplug both the cables from the MBox to the speakers, the monitor loses signal. It doesn’t matter if the speakers are turned off, however they need to be plugged in (or the monitor loses signal). Weirder still, I can unplug the MBox, however the monitor will work if I plug in the speakers through my macs headphone jack.
    Simply put, the monitor only works if there is a direct connection between the computer, the speakers, and the power source.  What is going on here? Is the monitor grounding through the computer port, to the speakers (I don’t know how this works, is this possible?). Could it somehow be the cheap VGA adaptor I am using?
    Some other information:
    - Everything is plugged into the same multi-box for power. I have tried plugging things into separate sources, and the result is the same.
    - If I unplug the thunderbolt adaptor, then the speaker noise disappears straight away.
    - The ground noise doesn’t appear in my headphones, which are plugged into the MBox.
    Any information would be great – am I missing something here, or is this genuinely weird?

    Hello cgoldberg11
    Please go to the below link to test if you are having a speaker hardware failure.
    Testing for Hardware Failures (Windows 7)
    This will rule out hardware failure, let me know how that goes.
    Thanks
    If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
    Although I work for HP, my posts and replies are my own opinion and not those of HP. .....
    Reguards,
    Mo

  • Sound only works from one port

    My sound only works when I use the output port on the back of my computer, but I'd also like to use the one at the front of my computer for convenience. What setting am I supposed to change to do this? Here is some information about my system.
    ~ > cat /proc/asound/version
    Advanced Linux Sound Architecture Driver Version 1.0.24.
    ~ > aplay -l
    **** List of PLAYBACK Hardware Devices ****
    card 0: PCH [HDA Intel PCH], device 0: VT1705 Analog [VT1705 Analog]
    Subdevices: 0/1
    Subdevice #0: subdevice #0
    card 0: PCH [HDA Intel PCH], device 2: VT1705 HP [VT1705 HP]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: NVidia [HDA NVidia], device 7: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: NVidia [HDA NVidia], device 8: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: NVidia [HDA NVidia], device 9: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    My guess is that I want to use device 2 of card 0, so I tried creating a ~/.asound.rc containing
    defaults.pcm.device 2
    but this didn't seem to do anything.

    The "Front" channel isn't the same thing as the front panel. From the ALSA wiki:
    "Front, Surround, Center, LFE (subwoofer) and Side (these are the names of the channels with Intel HD Audio, they may vary with different hardware)."
    How many sounds cards do you have?
    [dspider@arch ~]$ aplay -l
    **** List of PLAYBACK Hardware Devices ****
    card 0: NVidia [HDA NVidia], device 0: HDA Generic [HDA Generic]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    [dspider@arch ~]$
    What are the other HDMI devices? The video card?
    And have you tried googling the problem?
    http://ubuntuforums.org/showthread.php?t=1462288

  • Nokia 6600 only works from one cell tower

    I have this weird problem with my phone where it will only work off one cell tower. Once I leave the coverage of that cell tower it will not work anywhere else.
    It started a few months ago and i'm not to sure why?
    The funny thing is it's the cell tower on top of my building at work, so when i'm at work it will work (calls/txt/etc) but as soon as I go home or even go to another city it will not.
    Any ideas?

    The first thing I'd recommend you do is to reset your phone, but I can't tell from the 6600's webpage what OS you're running so I can't give you instructions on how to do this.
    Have a look through your menus to see if you can find an option to reset to factory defaults, but please remember that doing so will wipe ALL data from your phone.
    If you wish to backup your data you can do so using the PC Suite application which you can find here :
    http://www.nokia.com/pcsuite
    Hope this helps.
    Regards,
    Edward

  • Swf file does not work from InDesign

    I am not sure if this is a Flash or InDesign question, so i will post on both..
    I am trying to embed an “animated” swf file (that was created in flash) into an InDesign layout and then export the InDesign layout to swf. in the resulting html file my navigation works ok but the swf file does not play “animate” when viewed in html or flash. It only shows up as a graphic. 
    I have tried exporting the ID file to xfl and bringing it into flash but then none of my animation works. What am I doing wrong?
    any help would be appreciated.
    thanks
    mattG

    You´re doing nothing wrong. SWF export of InDesign CS4 doesn´t support any media files. You can place videos, sounds and animations into indesign layout, but if you export to SWF, they won´t work in resulting SWF. They work in interactive PDF.
    And you can export your basic layout to Flash CS4 by using XFL export and import those media elements in Flash, but that may be quite a job. I have been strugled a lot with that method. My files used to go really messy when I open them in Flash.

  • Applet only works from local server

    I developed an applet that has worked perfectly during my testing on my local apache server, but when I put it on my web host the applet won't load and the browsers lock up. I have tried it with a couple of browsers. I am at a serious loss to figure out why it wouldn't work from my web host.
    My class files are in a jar because I have several classes, and the jar works fine from my local server.
    Someone suggested that I do a stack dump. I put some code in the init method to dump the stack, but nothing changed. I have no idea where to find the stack dump from an applet. The browser doesn't have a window to display it (that I know of) and my applet certainly doesn't have a stack dump edit control.
    Does anyone know how I can proceed with this? I am usually very clever about tracking down bugs and problems, but this one has me stumped. I am not posting code here because I have tested all the code on my local server and it all works great, just not from the web host. If posting code would help find a solution, I will be happy to do that.
    Any help would be very much appreciated.

    I am using gFTP to upload it. Below is the status info that I get during the upload. It changes the permission to -rw-r--r--, which is the same as everything else on the server and makes sense to me. After the upload, there is a message about ASCII, but I am assuming it is just switching back to ASCII mode after the upload.
    Loading directory listing /public_html/mydir from cache (LC_TIME=en_US.UTF-8)
    PASV
    227 Entering Passive Mode (209,85,106,12,79,105)
    STOR /public_html/mydir/myjar.jar
    150 Accepted data connection
    226-File successfully transferred
    226 205.601 seconds (measured here), 44.19 Kbytes per second
    Successfully transferred /usr/local/apache2/htdocs/mysite/mydir/myjar.jar at 44.48 KB/s
    SITE CHMOD 644 /public_html/mydir/myjar.jar
    200 Permissions changed on /public_html/mydir/myjar.jar
    SITE UTIME 20071212173109 /public_html/mydir/myjar.jar
    500 UTC Only
    Loading directory listing /public_html/mydir from server (LC_TIME=en_US.UTF-8)
    PASV
    227 Entering Passive Mode (209,85,106,12,79,123)
    LIST -aL
    150 Accepted data connection
    226-ASCII
    226-Options: -a -l
    226 15 matches total
    Edited by: sawatdee on Dec 13, 2007 6:14 AM

  • My ipod only works from 1 side of my headphones

    My iPod headphone jack only works on 1 side of the headphones but not both sides of the headphones. I try every headphones my friends have and my iPod is causing this problem. How can I fix the headphone jack inside my iPod??

    Have it replaced.  Either send it into Apple for replacement for a flat fee or send it to a third party repair comany to actually replace the part of for you at a cheaper cost.
    Here are Apple's pricing options.
    http://www.apple.com/support/ipod/service/prices/
    B-rock

  • NsDS5BeginReplicaRefresh only works from console

    Is there a difference between initializing a consumer from the GUI, and setting nsDS5BeginReplicaRefresh to 'start' from ldapmodify ?
    I'm running version 5.1 on Solaris 8.
    If I initialize a new replication configuration from the console, master/slave replication works. If I init using any other method(including ldapmodify) it appears to work, but fails on the first incremental update.
    It doesn't seem to matter what method I use to create the replicas and agreement.
    Any subsequent reinit's, using the same replication objects, work fine regardless of where BeginReplicaRefresh is called from.
    Anyone have any ideas?
    Cheers
    Kevin

    There is no difference between ldapmodify and the console - they both do the same LDAP operation - the server has no idea because it's just LDAP. e.g.
    ldapmodify ...
    dn: <dn of replication agreement>
    changetype: modify
    replace (or add): nsds5beginreplicarefresh
    nsds5beginreplicarefresh: START
    Both the command line and the console do the same thing. It is very mysterious why the behavior is different.
    Are you trying to create an agreement and initialize it at the same time from the command line e.g. create a replication agreement entry with the nsds5beginreplicarefresh attribute already in it? That will not work. The console first creates the replication agreement entry, then once it is created, issues the ldapmodify command.

  • Profile in use, can't be accessed, FF only worked when I created a new profile, are bookmarks lost?

    My computer crashed, when I restarted it and restarted FF (6.0.12.1739, with google, adobe and similar plugins), I got the "already running" message.
    I use Windows 7.
    When I learned to look for the parent lock file, not only was it not there, but my original profile folder to be empty.
    So I created another profile folder, and now FF works, but I cannot access my old profile folder.
    When I open the location where it should be, nothing's there. But if I go to profile manager, I see my original profile '' is'' still there (and apparently it's where it should be). I tried typing its location in Start, to no avail.
    '''I tried making all folders visible,''' as some sites recommend for people who use Windows, but this did not make my old profile folder visible.
    Are my bookmarks lost for good?
    I have restarted the computer several times 'til now.

    I forgot to mention that I can't access my old profile, because whenever I click on it, I continue to get the "already running" message. I know that I exit FF when I access profile manager.

  • Why Oracle Access Manger only works via Kerberos in IE/Mozilla?

    Hi,
    OAM is working only on Chrome/Safari, Why it is not working with IE/Mozilla. Why it is working only via Kerberos? Please help us in understanding this as we are very new to OAM.
    Thanks,
    Durga

    Hi Durga,
    could you be more specific? Please provide the version number of OAM and the platform.
    I run OAM 10.1.4.3 and OAM 11.1.1.3 on Red Hat Linux 5. 64-bit with Firefox 3.x and IE 7 as front ends without any issues.
    --olaf                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

Maybe you are looking for