Newbie issue with 1x1pixel

hi
new to mac ive had endless problems with pop ups to i installed a pop blocker didnt seem do much do i del st8 away
now i dnt know if anyone is your knows about a website for shinking links
but everytime i try and open from this website
adf.fl
seems to always deplay link plus 1x1 pixels
i cant find now on mac any folders or setting for this pop blocker or anything
or even if that was reason why they page stopped loading
pls help
my mac is macbook pro 10.7.5
safari 6.1.1
note ive tried to open in google chrome also ....and same happens
the link.....http://adf.ly/1987608/element-3d

found this link but its for older fix for older version of safari i dnt think new one has this menu
http://www.adeepbite.com/fix-safari-1x1-pixels-error/

Similar Messages

BSOD issues with Z68A-GD55 (B3): BIOS issue? Hardware issue? Voltage issue?

Built this PC two months ago and have had issues. This is the message posted on the BIOS section:
Quote from: Grahamburger76 on 19-November-11, 03:48:23
I have the z68-gd55 (b3). I built this PC bout two months ago. Awhile after the build, started getting BSODs during gaming and eventually was led here to flash a new BIOS. I flashed the latest beta BIOS successfully and played for several hours. Then sleep the pc but get a BSOD again when powering it back up. The BCCode indicates an issue with the GPU or driver but I have read on that there was a problem in the BIOS for the z68-gd65 (g3) that the voltage was off and needed to be set differently to accommodate
Quote from: Bernhard on 23-September-11, 03:14:41
@Junior, all three BIOS' that I tested, the BCLK is shown as 100 in the BIOS but once in the OS it applies 98. I have now set the base freq manually 10010 and that applies 100,2 BCLK once in the OS. Needs to be fixed.
   The multi is still artificially restricted at X49.
   DRAM auto apply voltage is 1,472 in the BIOS. I set it manually to 1,5V (1,507V) to prevent BSOD. Rebooting, the BIOS still shows applied DRAM voltage as 1,472 although 1,507 is applied. Need to do some DMM tests.
   CPU phase control on the latest BIOS works correctly in Intel SVID Mode with the LEDs being lit solidly from 1 to 6 as the load is applied.
   Selecting APS results in either the first 3 LEDs being lit or all 6 LEDs being lit, nothing in between.
Has this been an issue in this boards BIOS too? Thanks because short of RMAing parts, I am about at a loss as to what to do to fix these issues.
This started with screen freezes needing hard restart using the restart button while playing Dragon Age:Origin and continued with Battlefield p4f, and BF3. After reseating the CPU/cooler, RAM, GPU then updating the drivers using Live Update 5 and then manually updating; I started getting BSODs and restarts while playing games and several time while using 3D Mark. Tried to change the voltage for the DRAM with no help and loaded only the Default Optimized Settings in BIOS. I updated the BIOS to the listing in my signature, moved the HDD and Optical drive to different SATA ports and updated the audio driver to the current one on MSI website. System finally seemed to be running fine then the stuff happened as quoted form my previous post.
As this stuff has continued, the PC seems to be running slower and slower. What I mean by that is the boot times have started taking longer and the system does not respond as quickly to commands. Like now, as I type, I am at least two or three words ahead of what is put on the screen (never has done that before). Funny thing about that is this was the fastest computer I have ever had with response, booting, and post (my wife even commented on how fast it booted up). Not sure if the other issues have anything to do with this but I am trying to post everything I can think of to give all the necessary info. If more information is needed then let me know and possibly tell me where to find it?
Not really sure how to post the dump files from Blue Screen View and My Event Viewer but gladly would if someone can give a newbie some direction on this. Thanks in advance for all help and consideration.

Yes, the BIOS I have flashed was pulled from there. I thought it had the problem resolved until it had another BSOD after several hours of use.
The Stop:error code, is that the Bug Check Code from the Blue Screen Viewer?
BBCode     0x00000116 (Parameters: fffffa80`0c09d4e0   fffff880`043a180c 00000000`00000000     00000000`0000000d)
I may have given you more stuff than you needed but I just figured to be thorough. This is the record from yesterday but there are like 5 or 6 more from the previous month that are in order from most recent to oldest.
DRIVER_IRQL_NOT_LESS_OR_EQUAL BBCode 0x000000d1 (Parameters: 00000000`0000009d     00000000`00000002   00000000`00000001   fffff880`055bbe7d)
BBCode 0x00000116    (Parameters: fffffa80`089c64e0   fffff880`0b95c008   00000000`00000000   00000000`00000002)
     BBCode 0x00000116 (Parameters: fffffa80`0c2094e0   fffff880`0440780c 00000000`00000000   00000000`00000002)
SYSTEM_THREAD_EXCEPTION_NOT_HANDLED BBCode    0x1000007e    (Parameters: ffffffff`c000001d   fffff880`00000001   fffff880`02b982b8   fffff880`02b97b10)
CRITICAL_OBJECT_TERMINATION     BBCode 0x000000f4 (Parameters:   00000000`00000003   fffffa80`08761730   fffffa80`08761a10   fffff800`031908b0)

Configuration Issue with my Cisco 871 Router

Hi all,
I am a newbie to the Cisco IOS.
I got a Cisco 871 Router that I'd like to use for internet connection. My LAN network is 192.168.1.0/24 and the ISP has assigned us the IP 41.212.79.108/24 and gateway 41.212.79.1.
With my current configuration, I can hit the router - 192.168.1.1 - and it's WAN port - 41.212.79.108 - but not the gateway.
Below is my current config:
Hoggers#show config
Using 4414 out of 131072 bytes
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname Hoggers
boot-start-marker
boot-end-marker
logging buffered 51200 warnings
enable secret 5 **********************.
no aaa new-model
crypto pki trustpoint TP-self-signed-568493463
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-568493463
revocation-check none
rsakeypair TP-self-signed-568493463
crypto pki certificate chain TP-self-signed-568493463
certificate self-signed 01 nvram:IOS-Self-Sig#7.cer
dot11 syslog
ip cef
no ip dhcp use vrf connected
ip dhcp excluded-address 10.10.10.1
ip dhcp excluded-address 192.168.1.1
ip dhcp excluded-address 192.168.1.2
ip dhcp excluded-address 192.168.1.3
ip dhcp excluded-address 192.168.1.4
ip dhcp excluded-address 192.168.1.5
ip dhcp excluded-address 192.168.1.6
ip dhcp excluded-address 192.168.1.7
ip dhcp excluded-address 192.168.1.8
ip dhcp excluded-address 192.168.1.9
ip dhcp excluded-address 192.168.1.10
ip dhcp excluded-address 192.168.1.100
ip dhcp excluded-address 192.168.1.90
ip dhcp pool ccp-pool
   import all
   network 10.10.10.0 255.255.255.248
   default-router 10.10.10.1
   lease 0 2
ip dhcp pool LANPOOL
   network 192.168.1.0 255.255.255.0
   default-router 192.168.1.1
   dns-server 41.212.3.2 41.212.3.253
ip domain name yourdomain.com
ip name-server 41.212.3.2
ip name-server 41.212.3.253
archive
log config
hidekeys
interface FastEthernet0
interface FastEthernet1
interface FastEthernet2
interface FastEthernet3
interface FastEthernet4
description Wan to Outside World
ip address 41.212.79.108 255.255.255.0
duplex auto
speed auto
interface Vlan1
description $ETH-SW-LAUNCH$$INTF-INFO-HWIC 4ESW$
ip address 192.168.1.1 255.255.255.0
ip tcp adjust-mss 1452
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 41.212.79.1
ip http server
ip http access-class 23
ip http authentication local
ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
ip dns server
ip nat inside source static tcp 192.168.1.31 80 interface FastEthernet4 80
access-list 23 permit 10.10.10.0 0.0.0.7
no cdp run
control-plane
scheduler max-task-time 5000
end
I'll appreciate any light you can shed on what am missing.

2 wireless routers can not communicate wirelessly with each other.
You need to connect cable between 2 routers and use the second wireless router as access point.
Follow this link to connect Linksys router to another router.
Some of your devices are getting same IP address. This might be the issue with DHCP server of the router. You can try DHCP reservation on the router so that each device will get unique IP address.

EJB Issue with return empty children in join fetch query

I'm a newbie and still trying to learn all of the facets of EJB 3.0 (and other backend capabilities) however could not find this issue anywhere resolved.
I have a recursive table which has a 0,1-n relationship with itself. In this case, I want to query for all objects and fetch the resulting children.
To do this I have written the following query:
select o from Node o inner join fetch o.childrenNodeList order by o.nodeorder
If my database has the following entries:
Parent
Child
Grandchild
The above query will get all 3 and allow me to access the list of children through getChildrenNodeList, however, for Grandchild this returns "An attempt was made to traverse a relationship using indirection that had a null Session...." for Parent and Child however it works like it should and gets the fetched rows.
Is there a way for me to either:
1. Modify the query so that the getChildrenNodeList will return a 0 sized array (so I can test for no children)
2. Modify the getter such that I can check that the parent really has no children and not some issue with the query
Thanks for any help,
Kris

fixed

Issue with Setting Up Test Server for PHP/MySQL to work

I've got a few newbie issues
which I hope someone can help with!
I'm trying to get Security Assist to work, so I've put MYSQL and workbench on my computer to get it going. I haven't created a test server in PHP, because I'm wondering if it will affect my already running website ftp? Will it take down my company website if I create a test server with the same ftp as my website?
So, I created a model in workbench (table) and I've tried to connect mysql to dreamweaver. I keep getting an error when I try to connect!
Despite the error saying an error has occurred..I have something which looks like a plus (+) sitting in my database area on DW, but it says there's no tables there! And in mysql there is a table!
I'm a bit bloody lost to tell you the truth. Just changing the password on mysql to get going was horrendous.
Anybody have a solution to get me going, so that my tables are sitting nicely in my dW and can be connected to my SA (Security Assist).
Ugh!

The first question: on what platform? Windows - Mac?
I only succeeded in setting up a testing server on my Mac
with PHP and MySQL after reading a book of David Powers. On Leopard
I belief there still are problems connecting PHP to MySQL.

Issue with buttons

Hi guys, I'm having an issue with some thumbnail buttons that are part of my own folio site. I've already built the site but have been going back over it and improving it. I'm currently updating my gallery section which simply consists of thumbnails (images converted to button symbols) which load their corresponding image into a uiloader component via action script 3:
preloaderArt.visible = false;
var loadedLoit:Number = 0;
image1_btn.addEventListener(MouseEvent.CLICK, loadimage1);
function loadMainImageLoit(event:MouseEvent):void{
loader.source ="art_images/image1.jpg";
preloaderArt.visible = true;
loadedimage1 = 0;
preloaderArt.progress.width = 0;
loader.addEventListener(Event.COMPLETE,image1Loaded);
function image1Loaded(e:Event):void {
preloaderArt.visible = false;
loadedimage1 = 0;
preloaderArt.progress.width = 0;
loader.addEventListener(ProgressEvent.PROGRESS, loadingimage1);
function loadingimage1(e:ProgressEvent):void {
loadedimage1 = e.bytesLoaded / e.bytesTotal;
preloaderArt.SetProgress(loadedimage1);
All I wanted to do was replace my old thumbnail buttons with new thumbnail buttons. To do this I:
1. deleted old thumbnail buttons
2. imported new images and converted to buttons using old thumbnail buttons instance name
3. added an alpha tween:
import fl.transitions.Tween;
import fl.transitions.easing.*;
var image1_btnTween:Tween = new Tween(image1_btn, "alpha", Strong.easeOut, 0,1,4, true);
After doing this I've lost all button functionality in both flash preview and browser preview. Before making the changes the gallery worked fine, and the only change I've made to the code is adding in the alpha tweens. I've tried deleteing the tween code as a fix but it didn't work. I've triple checked instance names and get no error messages.
Would the problem have anything to with me switching the instance name onto a different object (step 2 above)? I'm still a bit of a newbie and feel this could be something pretty obvious, so apologies if it is. I'm using the mac version of flash CS5. Many thanks in advance.

Could you check if there is text onyour button. If there is a text, turn of the selectable option to false. This could be the issue

[SOLVED] Fresh Install Error - Issue with PGP Key 4096R/753E0F1F

Hello Guys,
This is my first topic. I have done all the research in this forum and in Google for the issue, with no luck in finding a solution. I have done several Arch linux installs before on Virtual Machines and PC's all of them working properly, except for this one that I can not get to pass the install phase.
Description of Hardware:
HP Laptop Pavilion Entertainment PC dv2-1030us
Athlon AMD Processor
4 GB RAM
300GB HD
ATI Video Card
Broadcom wireless Card (Default drivers Not Working)
Wired Network Card (Working)
I'm trying to install Arch from USB drive created from another arch machine via:
sudo dd if=/name_of_file.iso of=/dev/sdX
Using Arch Version:
Current Release: 2014.08.01
Included Kernel: 3.15.7
ISO Size: 559.0 MB
The above bootleable USB drive have been used to install Arch in another machine currently running it.
After creating the partitions on the drive, namely:
BOOT
SWAP
ROOT
HOME
And formatting them accordingly to the install guide, and having the system ready to download all the base and base-devel packages via:
pacstrap -i /mnt base base-devel
Right after it finishes downloading I get the following error:
downloading required keys in keyring...
:: Import PGP key 4096R/753E0F1F, "Anatol Pomozov <[email protected]>", created: 2014-02-04? [Y/n] y
error: key "Anatol Pomozov <[email protected]>" could not be imported
error: required key missing from keyring
error: failed to commit transaction (unexpected error)
Errors occurred, no packages were installed.
==> ERROR: Failed to install packages to new root
I first ignored the error and then tried to proceed with the installation process and executed the following sequences of commands:
genfstab -U -p /mnt >> /mnt/etc/fstab
and then tried to chroot with:
arch-chroot /mnt
Then i got the following error:
mount: mount point /mnt/etc/resolv.conf does not exist
chroot: failed to run command "/bin/sh": No such file or directory
Here is list of the Topics i Found in this forum that throw some light into the issue, some of the solutions I have tried with no luck at all:
https://bbs.archlinux.org/viewtopic.php?id=185089
https://bbs.archlinux.org/viewtopic.php?id=181057
https://bbs.archlinux.org/viewtopic.php?id=178185
I hope you can help find a direction where to start fixing this issue, since i feel pretty lost right now. By the way I'm a Newbie in the Arch Linux world, so there are a lot of thing that are not that obvious to me...
Thank you in advance.
Last edited by alejandroccs (2014-08-20 21:12:13)

I've had the same issue with an (outdated) Arch Linux iso. As far as I am aware, it is caused by pacman's keys becoming out of date.
I've managed to get around this before, but the exact method eludes me.
You could try just updating the archlinux-keyring package, by refreshing pacman (pacman -Sy), then reinstalling only that package (try pacman -S archlinux-keyring).
Then you should be able to continue as normal.
Note that this only affects the CD filesystem in RAM - it will not persists across reboots using the CD.
The reason why this might work is that the package archlinux-keyring might not be signed by the key you were having issues with. If it still fails, you could temporarily set the SigLevel for the core repo to 'Never', however this does disable package signing, at least until you reset the SigLevel.
Unfortunately, I could not replicate the problem in a Qemu VM, so I'm not sure how good my method is. Hopefully, it fixes the problem.
Here are some links that might help shed some light:
http://calvinx.com/category/unix-linux/archlinux/
https://wiki.archlinux.org/index.php/Pacman-key
Hopefully this is helpful!
pypi

Issues with Essbase Server configuration

Hi All,
- I have a simple environment with one foundation server with only foundation services running on it (only foundation components installed). On the single Essbase server, I have installed foundation (by default) and Essbase components.
- I'm facing an issue with the Essbase server configuration. All steps complete except for the last step: Deploying the web applications (APS and EAS) to the WebLogic server.
- FYI, I am deploying the web application to the existing domain created on the Foundation server. As all products need to be on the same domain..
During deploying, the WebLogic admin server reports the following error:
BEA-149003
Unable to access application source information in /opt/shared/apps/hyperion/Oracle/Middleware/EPMSystem11R1/products/Essbase/eas/server/AppServer/InstallableApps/Common/aps.ear for application ‘APS’.
The specified error is: No application files exist.
Now the above path and files exist on the Essbase server but not on the Foundation server. So after playing around with the WL admin console and reading Sandeep's post[1], I have come to the conclusion that:
1. The Essabase components have to be installed on the Essbase server, but not configured.
Now this implies that I need to install all components on the foundation server even though I will only be using it to deploy the foundation services which seems a bit silly?
2. Create a new domain on the Essbase server, so the EAS/APS will be deployed on the Essbase server - but won't be on the same domain as the other products.
Well I'm a newbie with WebLogic and would thus appreciate your valuable inputs!
Thanks in advance...
References:
[1]. http://sandeepseshan.blogspot.in/2009/02/weblogic-server-10-deployment-error.html

From the configuration docs -
"On the machine on which you plan to administer the WebLogic Server, you must install all Web applications for all applications you plan to deploy on any machine in the environment. (The WebLogic Administration Server is installed and deployed on the Foundation Services machine.)"
You shouldn't need to create a new domain for deploying on other servers and can use the existing one and only deploy the web applications on the servers you want them running on.
I am not sure which version you are installing but if it is 11.1.2.1 then I take it the OS is the same type on both machines
"All Web applications in an EPM System deployment must be deployed on either windows machines or on all UNIX machines."
There note has doesnt seem to be there in 11.1.2.2 so I assume it is not the rule anymore.
Cheers
John
http://john-goodwin.blogspot.com/

Permissions issue with OSX 10.5.8

This is likely a newbie question. I am new to OS X, but I am familiar with Linux/Unix Terminal usage.
I have a permissions issue with OSX 10.5.8.
I cannot use basic commands on the Terminal, such as mkdir, on my own home directory. I get an error message saying the operation is not permitted.
I have traced the probable culprit down to default ACL permissions settings.
So after hours of research on Google, I found out that ACL are turned on by default in OSX 10.5.8.
But I don't know how to safely use it yet, so I need help.
I'm not quite familiar with ACL, so I need to know how to add myself safely and securely to modify my home directory.
The command is with chmod. Can this also be done via the GUI?
What is the option for chmod to modify my home directory?
Is it:
*$ cd ~*
*$ chmod +a "user:john allow write" .*
*$ chmod +a "user:john allow delete" .*
Alternatively, if I use the "chmod -N ." command on the home directory, will that safely remove all ACL? Or is that recipe for a major security hole in my machine?
Thanks!

There are many people on this board that know way more than I do. Sometimes there is the tendency to copy/paste some kind of boilerplate response though, especially if there isn't quite enough information about a particular problem, so just keep trying.
You should be able to add anything you want to your user directory without the use of any ACL entries. The purpose for the *deny delete* entries on the system created folders would probably be to reduce customer service calls about "accidentally" deleting some of the folders that the system expects to be there - it does not affect creating items.
To verify that there aren't other attributes getting in the way, open the /Applications/Utilities/Terminal application, copy/paste the following command(s) into the window (there is a trailing space), drag the problem folder(s) from a Finder window to the Terminal window (this will paste the path), press return and post back with the results:
/usr/bin/who am i; /bin/ls -leO@d
These commands will display the ownership and permissions, including any ACL entries and extended attributes.
On my Leopard user folder the permissions are drwxr-xr-x+ with an ACL entry *group:everyone deny delete*. These permissions allow read/write for me, read for everyone else, and an administrator authentication will be needed to delete the folder. These are similar to what you posted earlier, so maybe there is something else going on in there.

Issues with Creative Cloud for teams deployment workflow

The Adobe Creative Cloud for teams IT Deployment Guide lists out steps for IT admins to deploy the CS6 applications and then have their end-users license the trial software with their Adobe IDs once they have been invited to the team. There are two major issues with this document.
First, the media that is on the FTP is not for North American English. We are working to get that posted on the FTP site ASAP. In the meantime, you can find the CS6 MC media from: http://www.adobe.com/downloads/
[Note: Getting media from that page requires the use of the Adobe Download Assistant which is very consumer focused. Sorry about that.]
Second, in order to have the ability to login properly with a Creative Cloud for Teams account the system needs to have the latest copy of Adobe Application Manager installed. If you do not do this step the end user will be prompted for a serial number.
Unfortunately the Adobe Application Manager can’t be packaged with AAMEE nor is it a native installer. I know, I know! Here are the links to the Adobe Application Manager installers:
Windows: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4773
Mac: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4774
It can be installed from command line by:
Win: <Path to Setup.exe>Set-up.exe –mode=silent –action=install
Mac: <path to ASU> /ASU/Install.app/Contents/MacOS/Install –mode=silent –action=install
Jody Rodgers | Sr. Product Manager | Creative Cloud for Enterprise | Adobe Systems

Hi Boncker,
I see that you have an active Subscription under your account . Please launch any of the installed product and when you get the trial prompt , please click on License this software and then Enter the Adobe Id & Password for the account that you have accepted the invite .
Please do let us know if that worked for you or not .
Cheers,
Kartikay Sharma

Issue with magsafe/charging (blinks green, amber, off)

Having a quirky issue with my mid-2009 Macbook Pro.
A month or so ago, I began having an issue with my macbook charging. When the computer is up and running and I plug in the magsafe it will say "Calculating..." and then say "Not Charging" and then switch to battery use. It constantly does this as long as the magsafe is connected. The lights on the magsafe will constantly cycle from green to amber to no light.
At first, it would do it a few times then it would start charging. Now it constantly does this without ever stopping. I was editing video the other day for a while and it never stopped the cycle.
Thinking it was the battery, I took it into the Apple Store last week and got a new battery because it had been saying "Service battery" for a while and the battery would only last about 20 minutes on a charge. So I just thought the battery finally refused to charge.
But the problem still exists.
The magsafe is new (only 3 months old) and here's the quirky thing: the computer will charge if it's asleep (lid closed) or shut down completely. No blinking lights at all. It will charge as long as it's asleep or shut down. So I don't think it's the charger. But as soon as you hit the power button to starting booting up, it will blink.
I have reset the SMC a couple times actually, but no change.
Is there something software/firmware related that I haven't tried? Any insight or suggestions would be greatly appreciated before I take it back to the Apple Store (which is about an hour away).
Thanks!

Try resetting the system management controller
http://support.apple.com/kb/HT3964?viewlocale=en_US
If that did nothing for you, try resetting the NVRAM
https://support.apple.com/kb/HT1379

Issue With Page Break When Sorting is also applied on group

Hi
I am facing an issue with Page break only when I have sorting applied on the grouping that I have in the template.
The following is the sample XML
<ROWSET>
<ROW>
<GRE>org1</GRE>
<ORGANIZATION>Accounts</ORGANIZATION>
<FULL_NAME>test1,</FULL_NAME>
<ELEMENT_NAME>TEST BONUS</ELEMENT_NAME>
<CLASSIFICATION>Supplemental Earnings</CLASSIFICATION>
<RUN_VALUE>250</RUN_VALUE>
<MONTH_VALUE>500</MONTH_VALUE>
<QUARTER_VALUE>500</QUARTER_VALUE>
<YEAR_VALUE>500</YEAR_VALUE>
</ROW>
<ROW>
<GRE>org1</GRE>
<ORGANIZATION>Finance</ORGANIZATION>
<FULL_NAME>test2</FULL_NAME>
<ELEMENT_NAME>VOLUNTARY AD AND D</ELEMENT_NAME>
<CLASSIFICATION>Voluntary Deductions</CLASSIFICATION>
<RUN_VALUE>5.19</RUN_VALUE>
<MONTH_VALUE>10.38</MONTH_VALUE>
<QUARTER_VALUE>10.38</QUARTER_VALUE>
<YEAR_VALUE>10.38</YEAR_VALUE>
</ROW>
<ROW>
<GRE>org1</GRE>
<ORGANIZATION>Finance</ORGANIZATION>
<FULL_NAME>test3</FULL_NAME>
<ELEMENT_NAME>HMO MEDICAL</ELEMENT_NAME>
<CLASSIFICATION>Pre-Tax Deductions</CLASSIFICATION>
<RUN_VALUE>19.67</RUN_VALUE>
<MONTH_VALUE>39.34</MONTH_VALUE>
<QUARTER_VALUE>39.34</QUARTER_VALUE>
<YEAR_VALUE>39.34</YEAR_VALUE>
</ROW>
<ROW>
<GRE>org1</GRE>
<ORGANIZATION>Finance</ORGANIZATION>
<FULL_NAME>test4</FULL_NAME>
<ELEMENT_NAME>PENSION NR DC</ELEMENT_NAME>
<CLASSIFICATION>Pre-Tax Deductions</CLASSIFICATION>
<RUN_VALUE>0</RUN_VALUE>
<MONTH_VALUE>360</MONTH_VALUE>
<QUARTER_VALUE>360</QUARTER_VALUE>
<YEAR_VALUE>360</YEAR_VALUE>
</ROW>
</ROWSET>
In the template I group the data based on CLASSIFICATION and then sort on the same column CLASSIFICATION. I have a page-break applied for every group.
When I generate the PDF, I am not getting the page-breaks for every group. Instead some of them are displayed in the same page.
But when I remove the sorting that I had in the template on the column CLASSIFICATION, I am getting the output in the desired way but not in a sorted order.
kumar

Hi All,
I am using MS-WORD 2007 and BI Publisher desktop 10.1.3.3.3.
When I use split-by-page-break, splitting is performed for every line .. but not for group of lines.
Can anybody throw some light on this?
FYI...
I am using this code:
?if: position() mod 6= 0?
?split-by-page-break:?
?end if?
(Of course with in tags)
in G_LINES loop.
Can anybody help me out :-(
--Saritha

Issue with PTO (Paid Time Off) quota generation

Hi All,
We have an issue with quota generation of PTO for our employees.
The issue goes like this:
We have a Paid time off for employees 5weeks( 200 hrs) for employees who have worked less than 5 years.
we have paid time off for employees 6 weeks ( 240 hrs) for employees who have worked more than 5 years.
we have the following logic that has to go in this config:
-- Our fiscal year starts on Feb 1st and ends on Jan end or Feb starts which has a full week of working days. ( ex: if 01/31/2012 falls on a Thursday the following Monday which has full 5 day working week would be the end of the fiscal year).
-- Depending on the working hours of the employees and the date of joining for the first year ( for new hires)0041 info type the eligibility gets varied and reduced. Ex( employees who joins on start of fiscal year and works 40hrs per week schedules is eligible for 200hrs of PTO. Employees who join in the month of august and works for 35 hrs per week ( i.e mid of fiscal year) would get 91 hrs of PTO.
I need to put this in the system. I am thinking this could be done with out tweaking PCR.I need help in configuring this in Absence quotas as to what are the things i need change in system config and how do i do it. Please help with some screen shots if possible. I really need this to get it done ASAP. Looking forward for help.
Thanks,
Chowdary.

We use TM00 schema. Can i call TS15 and TS 12 rules into TM00 acheieve my issue of quota entilements?
Iam doing this because my businees needs to see if an employee chages his work schedule from 40 to 30 or 20 etc.. the PTO has to vary accordingly.
As the minimum eligibility is to work for 20 hrs to avail the PTO days. If at any point the employee drops it under 20 he will not be eligible till he work any this >= 20hrs per month so the evaluation has to check periodically to update the quota availability.... I need help plz suggest ...

Issues with iMessage when switching data carrier (wifi - cellular)

So I have had this issue with my 5S and now my 6+ in iMessage. Not *always* but often enough I've run into issues sending messages via iMessage when I associate with wifi in that they don't send. I'll get an error message saying "not delivered" and it will stack as many outgoing messages I try to send. However, if I force the first message to send as text, subsequent messages will go through afterwards without issue. If I go from wifi to cellular I have no issues whatsoever and when I have these issues on wifi, my data works fine (incoming emails, Facebook notifications, etc.). I used to run cellular data only because I had unlimited but now I have a cap so I intend on using wifi when possible...but to have to send my first message as a text just so I can use iMessage is annoying...

Hi there BigDogg795,
I would recommend taking a look at the troubleshooting steps for iMessage found in the article below.
iOS: Troubleshooting Messages - Apple Support
To resolve issues with sending and receiving iMessages, follow these steps
Check iMessage system status for current service issues.
Go to Settings > Messages > Send & Receive and make sure that you registered iMessage with your phone number or Apple ID and that you selected iMessage for use. If the phone number or Apple ID isn't available for use, troubleshoot iMessage registration.
Open Safari and navigate to www.apple.com to verify data connectivity. If a data connection isn't available, troubleshoot cellular data or a Wi-Fi connection.
iMessage over cellular data might not be available while you're on a call. Only 3G and faster GSM networks support simultaneous data and voice calls. Learn which network your phone supports. If your network doesn't support simultaneous data and voice calls, go to Settings > Wi-Fi and turn Wi-Fi on to use iMessage while you're on a call.
Restart your device.
Tap Settings > General > Reset > Reset Network Settings on your iPhone.
If you still can't send or receive an iMessage, follow these steps
Make sure that the contact trying to message you isn't blocked in Settings > Messages > Blocked.
Make sure that the contact you're trying to send a message to is registered with iMessage.
If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
If the issue occurs with a specific contact or contacts, delete and recreate the contact in the Contacts app. Create a new message to the newly created contact and try again.
Back up and restore your device as new.
-Griff W.

Issues with WebForm performance

Hi,
We had migrated a new application from UAT to PROD and we encounter webform performance issues with the following actions..
After login, the first form you open it is
always slow. After this you can switch from one form to another without a
delay.
Then once you change any data – the next time
you access a form it gets delayed.
The point to be noted is, it doesnt have any performance issues in the UAT environment and the configuration settings,essbase cache settings are all the same. We did try to move the EPM system to a new server to see if this is a hardware issue but no luck, the performance issues still exist. The consumption of the CPU/memory has been checked and it is proved that the form opening delay has nothing to do with lack of memory.
The JVM head settings is set up at 4GB which is infact higher than that of the UAT environment(2GB).
runs on Windows server2008,11.1.2.1.600 EPM serve, has planning,reporting,foundation on one server (32GB ram) and essbase on another server (32GB ram). Any help is appreciated.
Please find attached the planning logs below and there is nothing mentioned in the hyperionplanning error logs.-----------------------------------------------------------------------------------------------------------------------------------------------------------------
<Nov 5, 2013 8:05:43 PM CET> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<Nov 5, 2013 8:05:43 PM CET> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<Nov 5, 2013 8:05:44 PM CET> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Oracle JRockit(R) Version R28.0.2-11-135406-1.6.0_20-20100624-2119-windows-x86_64 from Oracle Corporation>
<Nov 5, 2013 8:05:46 PM CET> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.4.0 Fri Dec 17 20:47:33 PST 2010 1384255 >
<Nov 5, 2013 8:05:48 PM CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Nov 5, 2013 8:05:48 PM CET> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Nov 5, 2013 8:05:48 PM CET> <Notice> <Log Management> <BEA-170019> <The server log file C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\Planning0\logs\Planning0.log is opened. All server side log events will be written to this file.>
<Nov 5, 2013 8:06:22 PM CET> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Nov 5, 2013 8:06:28 PM CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<Nov 5, 2013 8:06:28 PM CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@327b36fb
Calling getDomainConfiguration()
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@327b36fb
Calling getRuntimeService()
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@327b36fb
return com.bea:Name=RuntimeService,Type=weblogic.management.mbeanservers.runtime.RuntimeServiceMBean
return com.bea:Name=EPMSystem,Type=Domain
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@327b36fb
Domain location is 'C:\Oracle\Middleware\user_projects\domains\EPMSystem'
Calling getRuntimeService()
return com.bea:Name=RuntimeService,Type=weblogic.management.mbeanservers.runtime.RuntimeServiceMBean
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@327b36fb
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@327b36fb
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@327b36fb
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@327b36fb
Checking C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\Planning0\registry_update.xml file
EPM_ORACLE_HOME: C:\Oracle\Middleware\EPMSystem11R1
Template for PLANNING#11.1.2.0: C:\Oracle\Middleware\EPMSystem11R1\common\templates\applications\epm_planning_11.1.2.1.jar
Dependencies for C:\Oracle\Middleware\EPMSystem11R1\common\templates\applications\epm_planning_11.1.2.1.jar: []
BPMUI shared webapp not referenced from PLANNING#11.1.2.0
Application name: PLANNING#11.1.2.0
Application source: HyperionPlanning.ear
Server name: Planning0
Server port: 8300
Server SSL port: 8343
Application context: HyperionPlanning
Registry product type: PLANNING_PRODUCT
Registry physical web application type: PLANNING_WEBAPP
weblogic.Name property is 'Planning0', seems to be WebLogic mode
registry.isRegistryDatabaseCreated()true
Registry was initialized sucessfully
Executing pre custom update for PLANNING#11.1.2.0
EPM_ORACLE_INSTANCE: C:\Oracle\Middleware\user_projects\epmsystem1
Physical Web App found
Web app already linked to some application server: false
The registry was not modifyed because it already containse all sturctures
Web app is already linked to the logical web app
No needs to run custom updater for PLANNING#11.1.2.0
loggingUpdatePLANNING.block file exist or the system is running in the Fusion mode, skipping logging.xml configuration
Planning locale: en_US
<Nov 5, 2013 8:06:39 PM CET> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
<Nov 5, 2013 8:06:39 PM CET> <Notice> <Cluster> <BEA-000197> <Listening for announcements from cluster using unicast cluster messaging>
<Nov 5, 2013 8:06:39 PM CET> <Notice> <Cluster> <BEA-000133> <Waiting to synchronize with other running members of Planning.>
<Nov 5, 2013 8:07:09 PM CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<Nov 5, 2013 8:07:09 PM CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<Nov 5, 2013 8:07:09 PM CET> <Notice> <Cluster> <BEA-000162> <Starting "async" replication service with remote cluster address "null">
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Security> <BEA-090171> <Loading the identity certificate and private key stored under the alias DemoIdentity from the jks keystore file C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoIdentity.jks.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoTrust.jks.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file C:\Oracle\Middleware\jrockit_160_20\jre\lib\security\cacerts.>
<Nov 5, 2013 8:07:10 PM CET> <Alert> <Security> <BEA-090152> <Demo trusted CA certificate is being used in production mode: [
Version: V3
Subject: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState, C=US
Signature Algorithm: MD5withRSA, OID = 1.2.840.113549.1.1.4
Key: Sun RSA public key, 512 bits
modulus: 9550192877869244258838480703390456015046425375252278279190673063544122510925482179963329236052146047356415957587628011282484772458983977898996276815440753
public exponent: 65537
Validity: [From: Thu Mar 21 21:12:27 CET 2002,
               To: Tue Mar 22 21:12:27 CET 2022]
Issuer: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState, C=US
SerialNumber: [    33f10648 fcde0deb 4199921f d64537f4]
Certificate Extensions: 1
[1]: ObjectId: 2.5.29.15 Criticality=true
KeyUsage [
Key_CertSign
Algorithm: [MD5withRSA]
Signature:
0000: 9D 26 4C 29 C8 91 C3 A7   06 C3 24 6F AE B4 F8 82 .&L)......$o....
0010: 80 4D AA CB 7C 79 46 84   81 C4 66 95 F4 1E D8 C4 .M...yF...f.....
0020: E9 B7 D9 7C E2 23 33 A4   B7 21 E0 AA 54 2B 4A FF .....#3..!..T+J.
0030: CB 21 20 88 81 21 DB AC   90 54 D8 7D 79 63 23 3C .! ..!...T..yc#<
] The system is vulnerable to security attacks, since it trusts certificates signed by the demo trusted CA.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=thawte Primary Root CA - G3,OU=(c) 2008 thawte\, Inc. - For authorized use only,OU=Certification Services Division,O=thawte\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 3,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 2,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GlobalSign,O=GlobalSign,OU=GlobalSign Root CA - R3". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "OU=Security Communication RootCA2,O=SECOM Trust Systems CO.\,LTD.,C=JP". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=VeriSign Universal Root Certification Authority,OU=(c) 2008 VeriSign\, Inc. - For authorized use only,OU=VeriSign Trust Network,O=VeriSign\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=KEYNECTIS ROOT CA,OU=ROOT,O=KEYNECTIS,C=FR". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GeoTrust Primary Certification Authority - G3,OU=(c) 2008 GeoTrust Inc. - For authorized use only,O=GeoTrust Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[3]" is now listening on 127.0.0.1:8343 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[1]" is now listening on fe80:0:0:0:0:5efe:a53:4816:8343 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[4]" is now listening on 0:0:0:0:0:0:0:1:8343 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 10.83.72.22:8300 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Server> <BEA-002613> <Channel "Default[3]" is now listening on 127.0.0.1:8300 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Server> <BEA-002613> <Channel "Default[4]" is now listening on 0:0:0:0:0:0:0:1:8300 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Server> <BEA-002613> <Channel "Default[2]" is now listening on fe80:0:0:0:0:ffff:ffff:fffe:8300 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on fe80:0:0:0:0:5efe:a53:4816:8300 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[2]" is now listening on fe80:0:0:0:0:ffff:ffff:fffe:8343 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure" is now listening on 10.83.72.22:8343 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Nov 5, 2013 8:07:10 PM CET> <Warning> <Server> <BEA-002611> <Hostname "WIPLPRD01.svc.unicc.org", maps to multiple IP addresses: 10.83.72.22, 0:0:0:0:0:0:0:1>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <WebLogicServer> <BEA-000330> <Started WebLogic Managed Server "Planning0" for domain "EPMSystem" running in Production Mode>
<Nov 5, 2013 8:07:12 PM CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<Nov 5, 2013 8:07:12 PM CET> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
using java.library.path: C:\Oracle\Middleware\EPMSystem11R1/products/Planning/lib64;C:\Oracle\Middleware\EPMSystem11R1/bin;C:\Oracle\Middleware\EPMSystem11R1/common/EssbaseRTC-64/11.1.2.0/bin;C:\Oracle\MIDDLE~1\patch_wls1034\profiles\default\native;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\x64;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1\bin;C:\Oracle\MIDDLE~1\JROCKI~1\jre\bin;C:\Oracle\MIDDLE~1\JROCKI~1\bin;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\x64\oci920_8
EPM_ORACLE_HOME (C:\Oracle\Middleware\EPMSystem11R1) is set from JVM property "EPM_ORACLE_HOME".
using Java property for Hyperion Home C:\Oracle\Middleware\EPMSystem11R1
EPM_ORACLE_INSTANCE (C:\Oracle\Middleware\user_projects\epmsystem1) is set from JVM property[EPM_ORACLE_INSTANCE].
Reaquired task list lease: Tue Nov 05 20:11:49 CET 2013: 1383678709156
Seeking ESAPI.properties
Found in 'org.owasp.esapi.resources' directory: C:\Oracle\Middleware\EPMSystem11R1\products\Planning\config\esapi\ESAPI.properties
Loaded 'ESAPI.properties' properties file
Seeking validation.properties
Found in 'org.owasp.esapi.resources' directory: C:\Oracle\Middleware\EPMSystem11R1\products\Planning\config\esapi\validation.properties
Loaded 'validation.properties' properties file
Seeking antisamy-esapi.xml
Found in 'org.owasp.esapi.resources' directory: C:\Oracle\Middleware\EPMSystem11R1\products\Planning\config\esapi\antisamy-esapi.xml
EnterData_Inner Processing Time:424
2013-11-05 20:14:47,454 INFO Thread-51 calcmgr.launch - Date/Time Started: 2013/11/05:20:14:47.452 CET Server/Application/Database: localhost/1415_WP/AWP Business Rule Name: WPA_Count By Planning user: wipoadmin Values entered for run-time prompts: [Variable] Wrk_Scenario:"Work_Plan_2014"[Variable] Funds:"Regular"[Variable] Units:"0001"
- Date/Time Started: 2013/11/05:20:14:47.452 CET Server/Application/Database: localhost/1415_WP/AWP Business Rule Name: WPA_Count By Planning user: wipoadmin Values entered for run-time prompts: [Variable] Wrk_Scenario:"Work_Plan_2014"[Variable] Funds:"Regular"[Variable] Units:"0001"
2013-11-05 20:14:54,066 INFO Thread-51 calcmgr.launch - Date/Time Ended: 2013/11/05:20:14:54.066 CET Server/Application/Database: localhost/1415_WP/AWP Business Rule Name: WPA_Count By Planning user: wipoadmin.
- Date/Time Ended: 2013/11/05:20:14:54.066 CET Server/Application/Database: localhost/1415_WP/AWP Business Rule Name: WPA_Count By Planning user: wipoadmin.
EnterData_Inner Processing Time:64
EnterData_Inner Processing Time:15
EnterData_Inner Processing Time:359
EnterData_Inner Processing Time:2
EnterData_Inner Processing Time:53
EnterData_Inner Processing Time:4
EnterData_Inner Processing Time:7
EPM_ORACLE_INSTANCE (C:\Oracle\Middleware\user_projects\epmsystem1) is set from JVM property[EPM_ORACLE_INSTANCE].
EPM_ORACLE_INSTANCE (C:\Oracle\Middleware\user_projects\epmsystem1) is set from JVM property[EPM_ORACLE_INSTANCE].
EPM_ORACLE_INSTANCE (C:\Oracle\Middleware\user_projects\epmsystem1) is set from JVM property[EPM_ORACLE_INSTANCE].
Setting HBR Mode to: 2
In lookupBRLWA()
Found HBR product = ESSBASE_PRODUCT
Found HBR product = ESSBASE_PRODUCT
Found HBR product = ESSBASE_PRODUCT
HBR LWA Component = Default
Default HBR = http://WIPLPRD01.svc.unicc.org:19000/eas
In getDBDetails()
Found HBR product = ESSBASE_PRODUCT
In lookupBRLWA()
Found HBR product = ESSBASE_PRODUCT
Found HBR product = ESSBASE_PRODUCT
=2013-11-05 20:35:08,234 WARN [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' com.hyperion.hbr.security.HbrSecurityAPI - Error retrieving user by identity
- Error retrieving user by identity
Embedded HBR initialized.
EnterData_Inner Processing Time:6
EnterData_Inner Processing Time:867
[Tue Nov 05 20:35:33 CET 2013] Planning successfully notified HBR repository.
EnterData_Inner Processing Time:7
2013-11-05 20:40:38,613 INFO Thread-67 calcmgr.launch - Date/Time Started: 2013/11/05:20:40:38.606 CET Server/Application/Database: localhost/1415_WP/AWP Business Rule Name: NonPersonnel_Calc By Planning user: wipoadmin Values entered for run-time prompts: [Variable] Funds:"Regular"[Variable] Units:"0001"[Variable] Wrk_Scenario:"Work_Plan_2014"
- Date/Time Started: 2013/11/05:20:40:38.606 CET Server/Application/Database: localhost/1415_WP/AWP Business Rule Name: NonPersonnel_Calc By Planning user: wipoadmin Values entered for run-time prompts: [Variable] Funds:"Regular"[Variable] Units:"0001"[Variable] Wrk_Scenario:"Work_Plan_2014"
2013-11-05 20:40:47,241 INFO Thread-67 calcmgr.launch - Date/Time Ended: 2013/11/05:20:40:47.241 CET Server/Application/Database: localhost/1415_WP/AWP Business Rule Name: NonPersonnel_Calc By Planning user: wipoadmin.
- Date/Time Ended: 2013/11/05:20:40:47.241 CET Server/Application/Database: localhost/1415_WP/AWP Business Rule Name: NonPersonnel_Calc By Planning user: wipoadmin.
EnterData_Inner Processing Time:44
EnterData_Inner Processing Time:2
EnterData_Inner Processing Time:525
EnterData_Inner Processing Time:1
Reaquired task list lease: Tue Nov 05 20:41:49 CET 2013: 1383680509246

I already replied there but it seems no moderator is willing to approve my reply so it never shows up.
So I'll try replying in here instead:
I never thought it could be an emulator issue, I thought I had done something wrong to begin with. So I take having performance issues with tiled layer is not a common problem I suppose?
I'm using MOTODEV SDK platform, A1200 model (motorola).

Newbie issue with 1x1pixel

Similar Messages

Maybe you are looking for