Newbie Mac user needs help for mac to tv video/audio connection.

Alright so I scrolled through the forum posts of lots of people with specific problems on connecting to their tvs, but I have a far more general problem.
I really have no idea what cable(s) I need to in order to watch items playing on my laptop on my tv. It is an older tv, so I don't have HDMI connectivity, so right now my choices are basic 3 component or the 5 input color stream component.
So what cable(s) do I need to do this? A link to the item(s) in question in the apple store would be very helpful.
Thanks so much!

Similar Messages

Need help for user exit mereq001

Hi,
I need help for user exit mereq001. I think I messed up with include table CI_EBANDB and CI_EBANMEM. And When I tried to check the syntax . It gives me error like : <b>Class IF_PURCHASE_REQUISITION. Inconsistency in the dictionary for the structure mereq_item_s_cust_data.</b> Anyone had experience for this exit? I just need to extract costcenter information of the each item from the requisition and block the requisiton if the costcenter are differents from each other before the requisition is saved. Any one has idea about it?
Thanks.

biao,
Have you checked this struture consistency from SE11. Also check the activation log.
If there are any errors and you are not able to rectify the same use RSDDCHECK program, give your table name and run the report.
This will list down the error structures releated this table and also prompts for you to activate it.
Regds
Manohar

Need help for Format HD

Hi I need Help for Formating HD so Wat Key need hold on start up for format HD I apprciated you Help

Jesus:
Formatting, Partitioning Erasing a Hard Disk Drive
Warning! This procedure will destroy all data on your Hard Disk Drive. Be sure you have an up-to-date, tested backup of at least your Users folder and any third party applications you do not want to re-install before attempting this procedure.
• With computer shut down insert install disk in optical drive.
• Hit Power button and immediately after chime hold down the "C" key.
• Select language
• Go to the Utilities menu (Tiger) Installer menu (Panther & earlier) and launch Disk Utility.
• Select your HDD (manufacturer ID) in left side bar.
• Select Partition tab in main panel. (You are about to create a single partition volume.)
• _Where available_ +Click on Options button+
+• Select Apple Partition Map (PPC Macs) or GUID Partition Table (Intel Macs)+
+• Click OK+
• Select number of partitions in pull-down menu above Volume diagram.
(Note 1: One partition is normally preferable for an internal HDD.)
• Type in name in Name field (usually Macintosh HD)
• Select Volume Format as Mac OS Extended (Journaled)
• Click Partition button at bottom of panel.
• Select Erase tab
• Select the sub-volume (indented) under Manufacturer ID (usually Macintosh HD).
• Check to be sure your Volume Name and Volume Format are correct.
• Click Erase button
• Quit Disk Utility.
cornelius

Frustrated: Novice Illustrator User Needs HELP

Frustrated: Novice Illustrator User Needs HELP
Hello All
I am a novice user of Illustrator [after you read my question it will probably be obvious] running Illustrator 14.0.0 (CS4) - on a MAC iMac running 10.4.11. I am a small business owner and have to wear many hats and so I am forced to be my graphic designer by default - ha ha
PROBLEM - If I make a box using the RECTANGLE TOOL... The box should have a point at each Corner and the Middle of the box, as well as, in the Middle of each Side, and middle of Top and Bottom for a total of 9 anchor points... but it only has 5... missing the 4 anchor points in the Middle of each Side, and middle of Top and Bottom. It is the same on Text Boxes too.. I can NOT find a setting to change this.... More, when running Illustrator on my MAC Laptop, It has all 9 anchors on the box... I looked at Preferences etc... and matched everything to be the same but the problem is not fixed?
Any help would be greatly appreciated
Thanks-
13CrazyTrain

Aw, c'mon James. Chill it a bit.
Yeah. You continually throw around your little personal jibes, and then if someone calls your bluff, you think you can back out of it with the old "can't you take a joke?" comeback.
In my previous work environment where everyone used Illie, Freehand was a word to be used cautiously – a bit like Macbeth in the theatre.
Well, I didn't work in your previous environment. And FreeHand specifically had nothing to do with this thread until you brought it up. Seems to me it's you who has a FreeHand chip on his shoulder.
I thought you knew my way of expressing myself better...
What, you think I keep a personality registry of regulars here or something? I'll tell you what I don't do: I don't engage in personal insults here. Yet your personal jibes are frequent enough for me to have grown weary of them.
I think I was not dismissing bounding boxes as useless...
Excuse me? "There's absolutely no need to use bounding boxes"?
You are probably right that bounding boxes came with Illie 9.
Probably before that. But I can personally recall that the current-selection bounding box was present in AI9. Unlike some, I try to avoid making claims that I can't immediately substantiate.
I hopped straight from 6 to 9 and that was the first time I had seen them outside of Freewotever.
I'm not familiar with "Freewotever." But if you're again trying to be funny, you are also again revealing your near complete unfamiliarity with it. FreeHand is not the program that continually cluttered the interface with bounding boxes. In fact, for many years that is exactly one of the distractions FreeHand users complained about re Illustrator.
First off, FreeHand's interface doesn't display bounding boxes. It displays only bounding box handles (four dots) on non-basic constructs like clipping paths. (Somewehere around FH 9, it implemented the optional Transform Handles, but that's another thing.) In the cases of rectangles and ellipses, FreeHand doesn't display Bounding Boxes per se. Working in FreeHand has always provided more functionality with much less visual clutter (and tool glut) than Illustrator's defaults.
The difference is that FreeHand has always provided proper live geometric shape primitives--something which Illustrator still doesn't provide, even though it's one of the most basic of all vector drawing interface expectations, being present in just about any vector drawing program on the planet--except Illustrator. That point of confusion is common among those who are experienced only with Illustrator's chronically outdated and archaic interface.
Quite to the contrary, a rectangle drawn in a program that does provide basic live primitives doesn't need a bounding box to perform the bare-bones basic manipulation exemplified, because you can change the aspect ratio of it (and corner radius) anytime you want, regardless of its rotation. You can do this not only in FreeHand, but Canvas, Inkscape, Xara Designer, and even in just about any basic drawing module of just about any "works" or "office" bundle. It's just Illustrator that still fails to provide live shape primitives, and therefore needs a rotated bounding box to provide a very limited subset of such common functionality. You draw a rectangle (or any other geometric primitive) in Illustrator, and all you get is a dumb path. So Illustrator actually needs bounding boxes more than other programs, because of its anemic core funciton set and its hideous user interface.
But of course, someone who is familiar only with Illustrator wouldn't know that. Which is fine...so long as they don't spew derision at programs they know next to nothing about (and users of such programs).
...bearing in mind that I have been at this job since the days of Rotring pens with nosebleeds.
So? I was using Rapidographs and constructing compound rotation in isometric on the board for about a decade before I came to prefer Staedtler pens because I found them less prone to clog. What does that have to do with anything?
Obviously newcomers should be encouraged to use new features, but preferably not before they have grasped the basics thoroughly. How basic bounding boxes are is perhaps a moot point.
Nonsense. Other self-proclaimed "experts" in Illustrator would no doubt argue that bounding boxes were added for the benefit of "beginners." Again, this is not a "new feature." And yes, it is bare-bones basic; just implemented in a half-baked manner in Illustrator.
As for step 3 you are right, but if you turn off the preview you can use the pixels on the paths for alignment,
Egads. That's really grasping at straws, Steve.
...Or use bounding boxes.
Or use bounding boxes.
JET

I Need Help for the popup message every time I go to safari: "Warning! Old version of Adobe Flash Player detected. Please download new version."???

I Need Help for the popup message every time I go to safari: "Warning! Old version of Adobe Flash Player detected. Please download new version."???

If you are talking about Safari on the iPad, there is no version of Adobe Flash for iOS and there never has been. Clear Safari, close the app and reset the iPad.
Go to Settings>Safari>Clear History and Website Data
In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
If you are talking about Safari on your Mac, you are in the wrong forum. But I would still clear the cache, quit Safari and restart the Mac.

Need help for my requirement...

Need help for my requirement...
Hello Experts,
I have report where users can input the company, housebank, account ID and posting date.
Now in one column of my report named 'Cash in Bank', I need to get all postings from cash
accounts with GL code ending in '0'. Now, I know that I can get the amounts in BSIS/BSAS
but how do I link it with the proper bank and account?
For example:
                   Cash in Bank
Bank A
Account ID 1     1,000,000
Account ID 2     25,000,000
Hope you can help me guys. Thank you and take care!

hi Viraylab,
each house bank you can find in table T012, in T012K you'll find the bank accounts to the housebank, the G/L account will be in T012K-HKONT.
hope this helps
ec

Need help for writing extract program

hi
i need help for writing extract program to retriew data from legacy system.
i already developed bdc programs for me31k and me21.
my requirement is to write extract program s for those t.codes.
to retriew data from legacy system and stored in flat file.

i need help with a java program. it is a program that allows the user to enter a student's GPA, number of extracurricular activities, and number of service activities. The user can not enter a gpa above 4.0 or below 0. The user can not enter a negative number for the number of both activities. If the student meets the following criteria: 1) GPA of 3.8 or above and at least one extracurricular activity and one service activity, 2) GPA below 3.8 but at least 3.4 and a total of at least three extracurricular and service activities, 3) GPA below 3.4 but at least 3.0 and at least two extracurricular activities and three service activities, the message "Scholarship candidate" should display. If the student does not meet the criteria above, then the message"not a candidate" should display. Can you help me, please?
You haven't posted ANY 'java program' for us to help with.
The forum is NOT a coding service. It is to help you with YOUR code.
Post the code you have written and SHOW us (don't just tell us) how you compile it and execute it and the results you get. Then we can help you with any problems you are are having.
If you need help understanding just what the program should be doing you need to ask your instructor to clarify the assignment.

Hi! I am newbie to Reports need help with check boxes

Hi! I am newbie to Reports need help with check boxes. I am try-in to make a new check boxes that will validate in runtime. I have created two frames and one frame is dummy and other frame has big X line on it with conditions. Is this a right way to create check box! Please help thanks!

and one frame is dummy and other frame has big X
line on it with conditions. Is this a right way to
create check box! Please help thanks!Instead of creating a frame for X, you can create Ractangle and place X in it. Rest is fine.

I need help for Blackberry8700g

New User! I need help for Blackberry8700g; It is the error message Java.lang.outofmemory Error. I can not make even phone calls. After reset it is same message pop up and does not off the power jum error523 100408 .I tried How_do_I_wipe_the_BlackBerry_using_Jl_Cmder%3F but it does not allow me to log in.Thanks,Rehan

check this instruction:
http://crackberry.com/blackberry-101-lecture-12-how-reload-operating-system-nuked-blackberry

I have problem with buying in games , I got the massage that the purchased can not be completed , please contact iTunes support.. I need help for my case please

I have problem with buying in games , I got the massage that the purchased can not be completed , please contact iTunes support.. I need help for my case please

http://www.apple.com/support/itunes/contact/

Need help for flash builder

i need help for flash builder 4 and papervison 3d. I need to create a slider with it ranges of value from 10 to 50 to adjust the camera values for the camera.fov and also need to create it for the yaw of the object from 0 to 360. I try to look for any slider event and classes in this program but cant find any, btw, i need to use the AS only project file.
here is my codes:
can you please tell me how i should modify the codes?
package
    import flash.display.BitmapData;
    import flash.display.Sprite;
    import flash.events.Event;
    import org.papervision3d.materials.BitmapFileMaterial;
    import org.papervision3d.materials.BitmapMaterial;
    import org.papervision3d.objects.primitives.Sphere;
    import org.papervision3d.view.BasicView;
    [SWF (width="800", height="600", backgroundColor="0x000000",frameRate="30")]
    public class EarthBitmap extends BasicView
        private var sphere:Sphere;
        public function EarthBitmap()
            super(800 , 600);
            var earthmaterial:BitmapFileMaterial = new BitmapFileMaterial("../assets/Earth.jpg");
            sphere = new Sphere(earthmaterial,100,20,18);
            camera.fov = 25;
            scene.addChild(sphere);
            addEventListener(Event.ENTER_FRAME,rotateSphere);
        public function rotateSphere(evt:Event):void
            sphere.yaw(0.2);
            singleRender();

Turn the click handler into a full on separate function. Then store all the views in an array and use Math.rand() to randomly choose one.
Something like this:
<fx:Script>
     <![CDATA[
          var questionsArray:Array = {question2,question3,question5,questionRed,questionGeography};
          function buttonClickHandler(event:MouseEvent){
               var randomProblem:int = Math.floor(Math.random()*(questionsArray.length));     //generates a random integer between 0 and the total number of questions in the array (arrays are 0-based)
               navigator.pushView(questionsArray[randomProblem]);
     ]]>
</fx:Script>
<s:Button id="randomProblemButton" label="Next Problem" click="buttonClickHandler(event)" />
Haven't tested that, but something along that line should work

Need help for importing oracle 10G dump into 9i database

hi, Someone help me to import oracle 10G dump into 9i database. I'm studying oracle . Im using oracle 10G developer suite(downloaded from oracle) and oracle 9i database. I saw some threads tat we can't import the higher version dumps into lower version database. But i'm badly need help for importing the dump...
or
someone please tell me the site to download oracle 9i Developer suite as i can't find it in oracle site...

I didnt testet it to import a dump out of a 10g instance into a 9i instance if this export has been done using a 10g environment.
But it is possible to perform an export with a 9i environment against a 10g instance.
I am just testing this with a 9.2.0.8 environment against a 10.2.0.4.0 instance and is working so far.
The system raises an EXP-00008 / ORA-37002 error after exporting the data segments (exporting post-schema procedural objects and actions).
I am not sure if it is possible to perform an import to a 9i instance with this dump but maybe worth to give it a try.
It should potentially be possible to export at least 9i compatible objects/segments with this approach.
However, I have my doubts if this stunt is supported by oracle ...
Message was edited by:
user434854

Need Help for Nokia 6500 slide

Hi all I'm A new Guy here ,
But I do really need help for hard reset my phone
I already try *#7073# But It doesn't work ,
If Anybody know to make a hard reset please help

rwss wrote:
I'v got te same problem with my 6500 Slide, is there a button combination that we have to press
to hard reset the 6500 Slide?!
How does the 6500 slide hard reset?
That's simple.
All you have to do is:
From MENU goto SETTINGS, When there scroll down and select 'Restore Factory Setting'.
There are two options in there:
"Restore Settings only"
and
"Restore all"
Select "Restore All"
When done the phone will delete every thing on the Phone memory(C:\)(contacts,picture,messages etc)
and also restore phone to its original settings and will restart.
This proceedure is mostly common on S40 phone.
Hope this explain and solve the problem.

Need help for publishing web intelligence document (universe) into InfoView

Post Author: mirage
CA Forum: Publishing
Hello all,
I need help for publishing web intelligence document (universe) into InfoView.
can't find this information in Business Objects Designer's Guide and in Business Objects Administrator Guide.
Can somebody give short instructions how can I do it?
Regards, Slava

If the change between the 2 types of data has to happen dynamically during run time them
1. Use 2 dataproviders
a. Current
b. Historic
2. Merge the 2 dimensions
3. Use Webi variable to switch between the measure of the current and historic universe
Ex if [year] < 2010 then historic.[expense] else current.[expense]
Hope this helps,
Divya

Need help for access list problem

Cisco 2901 ISR
I need help for my configuration.... although it is working fine but it is not secured cause everybody can access the internet
I want to deny this IP range and permit only TMG server to have internet connection. My DHCP server is the 4500 switch.
Anybody can help?
         DENY       10.25.0.1 – 10.25.0.255
                          10.25.1.1 – 10.25.1.255
Permit only 1 host for Internet
                10.25.7.136 255.255.255.192 ------ TMG Server
Using access-list.
( Current configuration )
object-group network IP
description Block_IP
range 10.25.0.2 10.25.0.255
range 10.25.1.2 10.25.1.255
interface GigabitEthernet0/0
ip address 192.168.2.3 255.255.255.0
ip nat inside
ip virtual-reassembly in max-fragments 64 max-reassemblies 256
duplex auto
speed auto
interface GigabitEthernet0/1
description ### ADSL WAN Interface ###
no ip address
pppoe enable group global
pppoe-client dial-pool-number 1
interface ATM0/0/0
no ip address
no atm ilmi-keepalive
interface Dialer1
description ### ADSL WAN Dialer ###
ip address negotiated
ip mtu 1492
ip nat outside
no ip virtual-reassembly in
encapsulation ppp
dialer pool 1
dialer-group 1
ppp authentication pap callin
ppp pap sent-username xxxxxxx password 7 xxxxxxxxx
ip nat inside source list 101 interface Dialer1 overload
ip route 0.0.0.0 0.0.0.0 Dialer1
ip route 10.25.0.0 255.255.0.0 192.168.2.1
access-list 101 permit ip 10.25.0.0 0.0.255.255 any
access-list 105 deny   ip object-group IP any
From the 4500 Catalyst switch
( Current Configuration )
interface GigabitEthernet0/48
no switchport
ip address 192.168.2.1 255.255.255.0 interface GigabitEthernet2/42
ip route 0.0.0.0 0.0.0.0 192.168.2.3

Hello,
Host will can't get internet connection
I remove this configuration......         access-list 101 permit ip 10.25.0.0 0.0.255.255 any
and change the configuration ....      ip access-list extended 101
                                                            5 permit ip host 10.25.7.136 any
In this case I will allow only host 10.25.7.136 but it isn't work.
No internet connection from the TMG Server.

Newbie Mac user needs help for mac to tv video/audio connection.

Similar Messages

Maybe you are looking for