NEWBIE NEED HELP INSTALLING SOLARIS 8
I have a Sparc 20 workstation and having difficulty setting the OS. I have download the installation CD and the 2 software CDs. During the installation, when it gets to the kiosk, there should be a welcome screen asking to insert the first software cd. I have never get to this point. All I receive is a warning. If and when I reboot the sparc, the following error shows " time out waiting for ARP and RARP packet.
Thnx for all the help guys. After reading through the forum, I have managed to solve my issue. This is how I install the Solaris 8 on my sparc 20 workstation.
1. Put in the "First Software CD". Don't network it yet, do it after the installation.
"NOTE: IGNORE THE INSTALLATION CD."
2.Reboot the machine.
3. If the OS does not boot up, type boot disk1 and press enter
4. Type in root and password on login screen
5. Put in the "Second Software CD" when prompted." If the second cd does not read, follow the instruction and select REBOOT.
6. Once the machine reboot, double click on the CDROM drive and install the 2nd Software CD.
Once you do these 6 steps, all is done. Now you just go back and configure it to a server.
Similar Messages
-
Total newbie needs help installing and setting up Solaris 10 as a server
i'm attempting to set up one computer to act as a file and print server on my home network, so that i can store all of my music and video files on it instead and print to my parallel-only laser printer. 80% of the time i'm using my laptop, so i need the mass storage and printer to be handled by another device - the server!
i'm not sure if i'm even installing Solaris 10 correctly. how should it be installed to then act as a server? my two (incredibly long, like 3+ hours each) install attempts so far have resulted in an OS that looks like a nice fancy GUI-laden desktop which doesn't appear to show me my 750G SATA storage drive (the OS is on a 40G IDE drive).
in the end, i'd like to have the system working so that my only interaction with it is the power button - press it once to power it on and it'll boot up and long in automagically and make itself seen over the network (with printer and files stored on drives accessible to my laptop or any other PC that's on the same network), and then press the power button again to shut down the entire system gracefully (so far, when i press the power button, it's a quick kill like pulling the power cord - i'm pretty sure that's a bad way of having the system shut down, so how do i change it?)
i'm really hoping to use Solaris due to the promising ZFS scheme. my only exposure so far to unix / linux has been with ubuntu, which i usually like but sometimes loathe (primarily file permissions and network manager).Let's try step by step rather than asking for setting up a server as a while and I'll try to help you as much as I can.
For setting up a printer, it's not that easy or quick setting up a printer on Solaris, I mean it's not like plug-n-play. Tell us about your printer and how it's connected to your system (usb, ethernet, parallel, serial).
As for shutting down the system, it's recommended to use the shutdown commnad like this:
# shutdown -y -i0 -g0
--gibb -
Need help installing Solaris 10
Hello expert,
I installed solaris 10 on my Ultra 2 box a few months back, for learning purposes, then I stopped using it. NOW I FORGOT ALL THE PASSWORD, INCLUDING ROOT PASSWORD.
I want to resintall solaris 10, but how do i get to the ok prompt if I don't remember the root password?
Please let me know if there is any other way that I can reinstall solaris from scratch.
thanks for all your helpThis question is asked in these forums about every six weeks.
It's answered every time.
Most of the answers are finally....
Use Google.
search with solaris root password
see 2 milion results from such a search
the information isn't a secret
(you won't need to go beyond the first page of search results.)
Google does indeed work for this issue.
Oh, and have your OS installation CD's ready.
You'll need them to repair your computer.
... and yes, you can repair it without reinstalling anything.
.( teach a man to fish, versus give a man a fish ) -
Newbi needs help installing GPIB card
I "inherited" a PC at work with a Nat Inst PCI GPIB+ card in it, but
no software and I can't seem to talk to it or the HP8753 spectrum
analyzer connected to it. I installed Labview 6.1 from a CD. I
downloaded NI488 ver 1.7 from the NatInst web site, which installed
MAX. MAX sees the GPIB card in "Devices and Interfaces", but when I
click on it and "scan for instruments", I get an error, saying the
card is not configured correctly. When I go thru the configuration in
MAX, I select the board type as PCI GPIB+, but don't see any serial
number listed. Nothing I do seems to configure the card so I can "scan
for instruments" and see the spectrum analyzer.
What am I missing?Thanks for the info.I'll try it and let you know. I'll remove the
board, uninstall the software, reinstall the software, and then
install the board and see if that works. Then I'll look at BIOS stuff.
On Mon, 17 May 2004 08:28:09 -0500 (CDT), Steven B wrote:
>Hello,
>
>Well, it looks like 488.2 1.7 is the version you want to be using.
>The errors you are seeing look like they are being caused by some
>resource conflict in your PC. Here is a Knowledgebase that discusses
>some possible reasons and solutions for this to occur when using NT.
>
>http://digital.ni.com/public.nsf/websearch/D4369B86117A0E15862567A90051B27C?OpenDocument
>
>Any luck with this? What about if you try installing the same board
>in another
computer? Does it work ok then?
>
>Regards,
>
>Steven B.
>Applications Engineering
>National Instruments -
Newbie need help installing server
Hi Guys
After a few years of working with Windows based servers and PC’s we have decided to introduce macs into the workplace. They are quite happily working on the windows network at the moment with little problems. But we want to have the macs on a separate network that is purely mac based, so we bought a mac mini server with snow leopard server I’ve been playing around and I’ve cracked DNS, DHCP and firewall. But my main problem is configuring the server to accept email and send email. Does anyone have any suggestions where to start and what i should be looking at, or if there are any good videos or guides about?
Cheers
PaulKinda of sorted the problem now but i will post new issue in mail section
Cheers -
I need help installing windows 8.1 on my new laptop help me
i need help installing windows 8.1 on my new laptop Hp Pavilion g7-2298nr help me it installs from store no problem then ask to restart then i restart it it gets stuck at windows logo and drive light on side not blinking i have shut down then it starts fine how to fix this problem so i can get it to install i need do it tonight reply before 8pm
Hello,
Thank you for posting in the HP Support Forum.
Your computer comes with Win 8 pre-installed but one of the steps to install/run Windows 8.1 is having updated drivers for Windows 8.1
Please, go to Control Panel -> System (or Start -> type winver and open) and verify what is your current version - if it is Windows 8 or 8.1
Windows 8 is version 6.2.x
Windows 8.1 is version 6.3.x
If Windows 8 in place, then , please read this article and enroll in the steps:
http://www8.hp.com/us/en/pdf/instruct_update_win8.1_EN_tcm_245_1508074.pdf
Update to the latest drivers prior and post installation respectively for win 8/8.1 :
http://support.hp.com/us-en/product/HP-Pavilion-g7-2200-Notebook-PC-series/5296086/model/5333384/dri...
Best wishes,
IT_WinSec
Hewlett-Packard employee | HP Enterprise Services
Although I work for HP, I express my personal opinion.
Visit www.hp.com/makeitmatter
--Say "Thanks" by clicking the Kudos Thumb Up in the post that you find useful.
--Please mark the post that solves your problem as "Accepted Solution" -
Hi i need help installing micrsoft silverlight it just wont install because of errors
Removing Silverlight - MAC | Microsoft Silverlight
-
Needing help installing a downloaded version of cs2
Hi, I am needing help installing a downloaded version of cs2 as I have purchased this product in the past, can anyone help me?
Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3
-
Need help installing adobe flashplayer
Need help installing adobe flashplayer for nokia Lumina 710 windows 7 phone
Flash Player does not require Java. But JavaScript needs to be enabled to run it.
See if anything in here helps: http://forums.adobe.com/thread/1267823 -
Hi I need help installing my creative suite 5 web premium cd on to my new pc which is windows 8 64 bit os, thanks
copy the all the cds' contents to one desktop directory. install from that directory.
-
Need help installing CC desktop app.
Need help installing CC desktop app. I tryed to update Creative Cloud, like it asked for. It didn't update, so I uninstalled CC app. Now it will not re install/ I ran AdobeCreativeCloudCleanerTool also, so now all my apps are gone.
I've got the same issue. Adobe only allows me to go to these forums instead of support chat. I have tried every single option that a google search suggests...
-
Need help installing Snow Leopard.
Need help installing Snow Leopard on a 2009 iMac. Hard drive is only choice for location and message says hard drive can't be used because it is used for Time Machine backups. Ultimate goal is to upgrade to OS 10.6.8.
Check to see if you have a file called backup.backupdb
If you do that means at some time in the past Time Machine was configure to backup to that drive
If that is not where you want your backup to to go, and it should not be stored there any way, then delete it and the install should work then.
Allan -
Need help installing snow leopard on mac mini 10.5.8 intel based
I need help need help installing snow leopard on mac mini 10.5.8 intel based so if u kno how pls message me thanks
<Email Edited by Host>You need to purchase the upgrade disk (it is a DVD). Then just put it in and run the installer. When it was first released it was $29 USD, do not know if the price has changed or not.
The usual precautions about backing up your data apply. In fact I would recommend either making a Disk Image of your current boot drive or using something like Carbon Copy Cloner to copy it to an external drive. I upgraded 5 machines from Leopard to Snow Leopard without any issues, but better to be safe than sorry. -
Need help Installing Flash player 10.3 for firefox. It stops at 50%
So I have Windows Vista Basic Home, I tried updating my Flash version in firefox because it was out of date, but everytime it start downloading it , then I get the a message that says "Error " Appliation in use." I uninstalled it and followed all the suggestions on the websites nothing is working. I even uninstall google chrome thinking it was the problem but I'm still having that problem so I really don't know what to do because now the only place Flash player is installed seems to be Google chrome that I had to redoawload, but everywhere else tells me that I need to install it.
RE-RE-RE REPITO, NO ENTIENDO NADA DE INGLES, PARA ESTE IDIOMA SOY COMPLETAMENTE NULA, POR FAVOR TODOS LOS MENSAJES, NOTAS, ECT., MANDEN EN ESPAÑOL.
Date: Thu, 29 Sep 2011 15:13:29 -0600
From: [email protected]
To: [email protected]
Subject: Need help Installing Flash player 10.3 for firefox. It stops at 50%
Re: Need help Installing Flash player 10.3 for firefox. It stops at 50%
created by Kpiebo in Installing Flash Player - View the full discussion
I have been at it since yesterday and it's still not working.
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/3945878#3945878
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/3945878#3945878. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Installing Flash Player by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
I need help installing photoshop pease help !
i need help installing photoshop
I'm sure you do, but in order to get it, you will have to provide some more info on your computer and what version of Photoshop exactly as well what is possibly going wrong...
Mylenium
Maybe you are looking for
-
Good day I have the situation where we are exporting PDF files from reporting services in our website. When dividing the data into sections, the report exports perfectly, but when exporting the entire set and trying to open the file, we get the foll
-
Content Assist does not work for me in Flash Builder 4.5 on Mac OS 10.6. For example, I type a variable definition and get no suggestions for variable. Type. Content Assist does work if I create a new project and a new class, but even with that it st
-
Hi everyone, The solution for this might be simple but my brain is just too tired :( I have this example table.... create table tmp_data( tmp_data_id number, tmp_data_date date, tmp_data_id_request number, tmp_data_status varchar2(50) );I have this e
-
I've been trying to share a completed iMovie project with iDVD. iMovie keeps quitting unexpectedly. Why does it keep crashing?
-
Hi we cf 11 enterprise 64 bit installed at window 2008 R2 SP1. try to setup data source for ms. access. getting following error :- Connection verification failed for data source: SARSINFO com.inzoom.jdbcado.JdbcAdoException: could not load izmjniado