Newbie, need help with online poker install

Hello all,
I am brand new to iMac and am having a difficult time playing online poker. I tried installing Pacific Poker but can't get it to run. The pacificpoker.exe icon shows on the screen, but that is as far as I can get. When I double click it, it ask me which application to use. That is as far as I can get. Please help! Thanks in advance!
Dave

You can't use the file you downloaded in Mac OS X outside of a Windows emulator such as Virtual PC or Parallels Desktop; instead, go here and use the Java client for Pacific Poker.
(14412)

Similar Messages

MSI P67A-C45 (B3) Newb needs Help with connections..

Hi all..
First time posting here, but have been in the shadows for quite a while..
Anyway, i decided to finally take the plunge, and build my own PC, and now i'm beginning to hit a few bumps.
I have a couple of questions that i would like some help with, if possible to reassure myself i may be in the right direction..
I bought THIS PSU and was hoping someone could tell me where the Blue connectors (one labelled CP and one labelled U1) Connect to?
Is it into JPWR2? And does it/do they only connect in the correct way? (Do i remove the plastic cap and attach both?
and i bought THIS VIDEO/GRAPHICS CARD and i'm guessing the RED "PCI express" and "SLI ready" connect to that somehow (Haven't opened box yet for card)
Again, wondering is there a certain way for them to connect.
Also, from my chassis, the "AC '97" and "HDA" connectors go to JAUD (I guess), does it matter which one? (I currently have "HDA" connected)
I have i5 2500k already on board. (If that makes a difference).

Quote from: Ben_Cartwright on 26-May-11, 22:05:35
Do the Audio plugs go into JAUD? and does it matter which one?
Yep, connect the front panel audio to the JAUD. If you need the pin layout, it says in the manual. I would say the HDA connector is the one to connect.
Quote from: Ben_Cartwright on 26-May-11, 22:05:35
Any recommendations for testing it all, before i plug it in, and press the power?
Should i (Can i) test individual parts first?
Thanks again.
Check all power connections, seating of the RAM and add-on cards, check the HSF is plugged into the fan header, and obvious things like that.
As for testing, enter the BIOS and make sure the CPU isn't running too hot. Set up the RAM with the required timings and voltage, and test with >>Memtest86<< for several hours. No point starting the Windows installation if say your RAM has errors, since it will corrupt files during the install, if it installs at all.

Newbie needs help with Flex app

Hi there. I am very new to Flex and also fairly new to
programming although I do have a little experience.
I am trying to create an app which stores code snippets or
common text I tend to use every day in my documents and emails.
So basically I need help on a design level. I can refer to
the developer's manual for exact instructions for commands, but I
need to know what to code first.
The app will consist of:
-a tree directory structure where I can create groups.
-There will be a basic text editor where I input all my data,
basic text formatting options (font, bullets etc) would be a bonus.
-A search function
-Finally it will ideally allow multiple client apps write to
a central database file over a network
Can anyone suggest how I should approach such a project?
Or are there any tutorials / source files which demonstrate
each bullet point?
thanks.

Hey jono,
I'm new too. But I think I might know the right components.
If you google any of these + flex 3 you should get some
decent documentation
tree - advanced dataGrid component
basic text editor - rich text editor component
search function - well, you're gonna need to read up on
arrays, and arraycollection. Once you get that stuff working, you
can write up a function to search for a string in an array.
network functionality - HTTPService, you can dump the
datagrid into a database, and have it load the database when you
open up the application.
Give these things a shot, tutorials / sources will come with
the google searches.

Newbie needs help with browser compatibility

Ok, so I'm new at this, so this may be something really
simple, but browser compatibility? I made a site in DW;html and it
shows up perfect in safari but internet explorer and firefox not so
much. I did a browser compatibility test in DW and it says nothing
is wrong with my pages, but obviously something must be!!
On my home page, the image of a house that I have next to the
company name shows up fine in safari but not any other browsers.
And my page layout, everything is moved over funny in other
browsers. Also there are link boxes around the table I created with
different brands of products. On safari the boxes do not show, but
all the other browsers it does!! I'm new at this and frustrated!!!
Need help!!
The link is holmeshifi.com and I posted code from the home
page!

OK thanks Ned sorry to soo dumb I'm on a learning curve here! what
I'm trying to do is go to the URLs of web galleries of images from my
main site
so I would presumably have to rename them on my server? i.e. does that
mean adding the code ", "_blank");
to the files on the server?
At the moment I have to use the back button on my browser window which
takes me back to the main site which then has to reload (tediously!)

Storm user newbie needs help with appcenter

hi everyone. i need help regarding my blackbeery storm 9500. i bought from a friend but he only gave the charger and the the phone. there is no app center. is there anyway i could get the appcenter so that i can get the bbmessenger?

You can download BBMessenger from your Blackberry browser at www.blackberry.com/bbm
AppWorld: www.blackberry.com/appword
You must have the BlackBerry Data Plan on your device to use either of those services.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Need help with some JS installing Bumpbox 2.0

I am trying to add a lightbox effect to a pdf on my website, I found a Javascript plugin at http://www.artviper.net/bumpbox-demo/index.html that looks like it should do the trick, but I am having trouble getting it to work.
To narrow down the problem I created a test.html file that I stuck in the root directory of the folder I downloaded from their site (so I am working locally off my desktop at this point)
My code is as follows... I feel like I am missing something super obvious, does anyone see it? (do I need to define the .bump class in the css file?)
Thank you in advance for the much needed help!
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<title>Untitled Document</title>
</head>
<body>
      <a href="http://www.artviper.net/test.pdf" class="bump" rel="800-350">PDF File »</a><br />
<script type="text/javascript" src="js/mootools.js"></script>
<script type="text/javascript" src="js/bumpbox-2.0.1.js"></script>
<script type="text/javascript"> doBump( '.bump',750, 500, '111', '900', '0.8', 5, 1 ,'333', 15,'000', 4,
                 Fx.Transitions.Bounce.EaseOut,
                 Fx.Transitions.Bounce.EaseOut,
                 'images/demo_bg_bumpbox.png',
                 'top left',
                 'repeat-x' ); </script>
</body>
</html>

These paths won't work because they point to files on your local hard drive.
<script type="text/javascript" src="file:///Macintosh HD/Users/Robert/Downloads/bumpbox Folder copy/js/mootools.js"></script>
<script type="text/javascript" src="file:///Macintosh HD/Users/Robert/Downloads/bumpbox Folder copy/js/bumpbox-2.0.1.js"></script>
Are you working within a properly defined local site?
Did you save those javascript files to the js folder in your local site root?
Correct path to scripts for this test page should look like this:
<script type="text/javascript" src="../js/mootools.js"></script>
<script type="text/javascript" src="../js/bumpbox-2.0.1.js"></script>
PS. Do not add spaces to folder or file names. It can create problems for web files.
Nancy O.

SCCM Driver Injection : What am I missing? Need help with getting drivers installing correctly in my environment.

Everyone,
I'm not new to using SCCM, but i'm VERY new to setting up and managing it. I have just laid it down for the school district that I manage, and i'm loving it. Imaging is going great, all but one thing now...drivers installing.
Let me tell you what I've been doing, so hopefully a kind soul out there can tell me where my logic of the driver "injection" process is lacking and might can fill in some gaps.
I downloaded all drivers pertaining to the 7-8 series of computers we have in our environment currently, and imported them based on a criteria such as this:
x86.LenovoEdge71.Desktop
x86.DellOpti755.Desktop
so forth and so on
I created packages based on the same exact naming scheme. I update my distribution point at the end of the import, and all the drivers/packages/categories are in place. When I go to Monitoring/Distribution Status/Content Status, all of my packages
show up , but under targeted it says 0.
My thoughts from reading online, is I upload all these drivers and during my task sequence where it says it's "applying device drivers" it's set to "install only the best matched compatible drivers" and "consider drivers from all
categories". I also checked "do unattended installation of unsigned drivers no versions of Windows where this is allowed".
so correct me if my thinking is incorrect, it should search through all series of the computers we have in our environment and grab the best drivers from the overall database. Is this not right?
The reason I ask this, is we have a few hundred HP 6000 Pro desktops. WHen I image them, it comes up with 2 unknown devices. OF these, I can manually point them at the folder from which I uploaded the drivers for this series/category and it installs
100% successfully...MANUALLY. What's the reasoning behind this?
I can't help but think there's something missing in my process / logic and I need to be set straight.
Can someone out there tell me what i'm doing wrong? We're planning a district-wide re-imaging before summer's over, and the clock's ticking...but the drivers being installed are all that's keeping us from starting our migrations.
Any help on this is GREATLY appreciated, thank you very much!

You have setup everything correct, but for your desired result you need to use "Apply Driver Package" Task rather than "Auto Apply Drivers".
Auto Apply drivers will install the best matched/compatible drivers for only the PNP devices.For more info on this:http://technet.microsoft.com/en-us/library/bb680990.aspx
Whereas "Apply Driver Package" would install all drivers you have in the package and hence you don't see the unknown drivers in device manager. For more info on this: http://technet.microsoft.com/en-us/library/bb680403.aspx
If you have multiple models, create this task for each model individually and then associate with a WMI query condition under Options tab to check the manufacturer/model
Example: Select * from Win32_ComputerSystem where Manufacturer = "HP" and Model Like "6000%"
Regards,
Manohar Pusala

Newbie need help with Web BEx setup!

Out of curiosity, I decided to install Netweaver so I can have a play with it. I am a complete newbie to Netweaver therefore I apologise if this is out of context...
Here's my question:
How do one go about getting Web BEx to work?
Whenever I activate the link in the portal, I get an error about unknown "SWITCH_AXES" command and 0ANALYSIS type 4 error. I search the forum and the few passing mentions of the problem points to OSS notes that is only accessible through service marketplace (which I don't have an ID). I have check the object types in BI content and seems that 0ANALYSIS is already activated. There must be something I am missing. Tried blindly and randomly installed other BI content (mostly Web templates and objects) but to no avail (and encounted a few short dumps).
Any help is greatly appreciated!
So far, here're what I did:
1) Install Netweaver 2004S ABAP and Java on the same machine. Instance 00, 01 and 02 respectively.
2) Try to run BI-Java template installer, but met with error part way. So some of the steps are done manually.
3) Set up SLD (both instance are in the landscape), and 'partially' set up SSO. Partially as while JAVA to ABAP seems to work, ABAP to JAVA is not working. Anoying but livable.
4) Installed TREX (instance 03) and are seen by ABAP and JAVA.
5) ABAP is seen in the portal and I can create transactional iviews and put them in the Portal (with working SSO).
6) Did reverse-proxying with Apache, but I don't think it matters as it seems to be a backend module issue.
7) Business planning/wizard is working (in ABAP and Portal) as is Broadcast. As you can see, Web BEx is the only thing that is not working

The default link for Web Analyser in EP 7 seems to point to the new template. When opening the analysis template in the new BEx windows tool, the same error is being reported. Using 3.5.x WAD, I can't locate the template.
More on this issue Although for that case, the meta data is not installed. Is there a way to trace missing component and reinstall the needed BI content in RSA1?
BTW, these are on JAVA SP9 and ABAP SP11.

Need help with arch linux install!

Hello, let me start off by telling you about the predicament I'm in at the moment. I've been trying to install arch linux on with a cd-drive that has been failing for a little over a year now, so you can already see where my problem starts! The cd-drive, however will work with such cd's as Windows, Ubuntu, and Slackware, which I'm happy with. Yet, archlinux doesn't work so much.
And now maybe my solution. I've got a usb cd drive, that I've had laying around that works well, just not well enough for my bios to be able to boot from; which is horrible I know. I've searched the bios for loading a usb cd drive and everything else, including google so I don't think I'm going to get anywhere with that one. Anyways what I'm thinking of doing is that when archlinux is in the terminal right before you type the "/arch/setup" command, I would like to know if there is any command that allows you to change the cd it boots the cd from to go right into the installation. I'm still working on easying my out of the newbie stage of linux at the moment, but I've never run into a command like that, that would help me out. Hopefully there is one though, because I would very much like to archlinux to work, so please respond! Right now I'm running elinks through the terminal right before you type "/arch/setup". Thanks!

loosec wrote:
So you get through the boot process just fine then on your old CD drive. The only thing you should have to do after that is to throw your CD into the USB CD drive and proceed with the installation. The installer should then ask you what CD drive you would like to use when you choose install from CD.
Another way to do it would be to switch cd like above and then manually mount your /dev/[your_usb_cd_here] on /src. The installer then has to be pointed to this place as the source of your installation. To find out what your usb cd drive is called you should unplug it, then replug it and run: dmesg
The mount command might also need to be shown that this is a cd so:
mount -t iso9660 /dev/[usb_cd_device_name] /src
should do the trick.
If you really want to learn more of what the installer does (and fail installing a few times) you should also check out the command
/arch/quickinstall
If your Internet connection is up for it, it seems like you could just choose an FTP install instead.
Goodluck!
Once the CD is removed from the drive that it was booted from. the installation will not continue, as the arch install always goes back to the boot drive to continue read the neccessary information for the install. I do not think there is a way to fool the computer into booting from one cd drive and then continueing on with another. To do this you would have to tell the computer that you are switching drives.
If you can boot up the CD kernel and get to where you type in /arch/setup then the next thing I would od is FTP install. That would limit your CD rom drie usage.
There is also a way to install arch from within another distro, EVEN ANOTHER LIVECD! <-- this may be your best bet. Check the wiki, there is tons of information there.
Last edited by rooloo (2008-08-16 12:32:00)

Crypto newb: Need help with encrypting data for offline Swing app

Hi all,
I'm VERY new to cryptography. Can somebody point me in the right direction? I've created a Swing application that is intended to be used offline (no network connections are established by the app). I need to export XML files from this application, to be transported via floppy to another instance of the application on a different computer for import. The information is sensitive and must be encrypted!
I started looking into AES and using asymmetric ciphers (public/private key encryption). But then I realized that if Jane is exporting a file for Bob to view, she won't have access to Bob's public key (no network access). Ugghh!
I noticed another solution in this forum where the person suggested using password encryption. It was an old post and I think it used DES. Anyway, password encryption doesn't seem too secure.
So, I thought I'd create a symmetic key (correct term?) once, store it in the program directory, and distribute it with the application installer. That way, everyone would have the same key and would be able to encrypt/decrypt each others files. Right? Err... I'm not sure.
Like I said, I'm a newb at crypto. If someone could suggest the best/most secure way to accomplish this, I would be eternally grateful.
PLEASE HELP!!! :-D
Thanks in advance.

Sorry, Grant. I must've posted that last one just
after your response. I was intending the message to
be for Anand. Heh - you have no idea how many times I've done the same thing. It's an artifact of the asynchronous nature of message boards.
Your response is very helpful. Out of
curiosity, does my last post provide any more insight
that would change your mind? Or do you still believe
that using password encryption and letting the user
choose/provide the password is the best solution?Well, as you noted, giving everyone two sets of keypairs is semantically equivalent to giving everyone a single symmetric key. And, as I've noted, it's completely INsecure - everyone who gets access to an install disk, either legitimately or no, can read every transmission your app makes forever after. Cryptographically speaking, this is Not A Good Thing.
The advantage of PBE is that it's easy for your users to exchange keys when their machines can't see each other. The real key here is that your app, if you really want it to be secure, MUST allow/require that transmission between Alice and Bob use a different key than that between Alice and Carlos or Bob and Carlos - otherwise, if Eve compromises any user of your software, ALL users are compromised.
I'd go with PBE, just because other alternatives are painful for your end users. You could use generated KeyPairs, for example, if you provide a means for users to exchange public keys. If you display Bob's public key in encoded, String-able form, then Bob can either email that to Alice or read it off to her over the phone. Into your app Alice loads/types in that public key, and the app now knows how to secure communications with Bob.
Public keys are large, though, and people screw them up typing them in. And many users have TERRIBLE key discipline - if Bob loses access to his private key, he can't read anything Alice sends. And if his private key is readable on some public shared folder (which happens with a totally-frightening regularity), then we're back to no security at all.
Use one of the triple-DES PBE Ciphers, and get on with making your app do what you really want it to do, would be my advice. (Free advice, of course, being worth every penny you pay!)
Once again, thanks a bunch!Glad to help.
Grant

Oracle SQL Newbie need help with OE Demo Schema Installation

Hello everybody !
I'm hoping some kind soul can help out this SQL newbie.
First of all i've installed 10g R2 database on a PC running XP SP2.
Oracle is installed on the root C: drive
I'm using the SQL Fundamentals I Exam Guide and DBA Handbook (Both Oracle Press)
as my reference.
My problem is this.
I installed the DB and created the demo HR schema without too much problem
but it's the demo OE schema i'm having problems getting running and cannot
find anywhere on the net that outlines a step by step SQL process.
I am using SQL Plus to execute these commands.
My questions are these:
-For the default tablespace i specify "users" ?
-What do i specify for the temporary tablespace ? "temp" ?
-what directory path do i put for the data files as parameter 6 ?
I put down "C:\oracle\product\10.2.0\db_1\demo\schema\order_entry" but i suspect it's
the wrong thing ?
-What do i specify for the writable directory path for the log files ?
Is it C:\oracle\product\10.2.0\RDBMS\log
-And what is "Specify version as parameter 8:" line ?
I assumed it was the db version but i believe it's wrong.
Could somebody please help me ? I've already done my CCNA and i wanted to add oracle under my belt.
I know if i had these few things cleared up for me it would pave the way to actually enjoying learning Oracle :)
Thank you for any assistance :)

I installed the DB products from the companion disk and there was no specific mention of the demo schemas. Regardless... They're all there within the demo subfolder and have already created the hr schema.. I just need somebody (I'll pay if necessary) to PLEASE just answer (what would be easy to you guys my questions so i can move on.
this is a cap from my sql plus..
SQL*Plus: Release 10.2.0.1.0 - Production on Mon Jun 14 15:01:29 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL> alter user oe account unlock identified by oe;
User altered.
SQL>
specify password for OE as parameter 1:
Enter value for 1: mewfymewf
specify default tablespeace for OE as parameter 2:
Enter value for 2: users
specify temporary tablespace for OE as parameter 3:
Enter value for 3: temp
specify password for HR as parameter 4:
Enter value for 4: mewfymewf
specify password for SYS as parameter 5:
Enter value for 5: mewfymewf
specify directory path for the data files as parameter 6:
Enter value for 6: C:\oracle\product\10.2.0\db_1\demo\schema\order_entry
writeable directory path for the log files as parameter 7:
Enter value for 7: C:\oracle\product\10.2.0\db_1\RDBMS\log
specify version as parameter 8:
Enter value for 8: 10.2.0
User dropped.
old 1: CREATE USER oe IDENTIFIED BY &pass
new 1: CREATE USER oe IDENTIFIED BY mewfymewf
User created.
old 1: ALTER USER oe DEFAULT TABLESPACE &tbs QUOTA UNLIMITED ON &tbs
new 1: ALTER USER oe DEFAULT TABLESPACE users QUOTA UNLIMITED ON users
User altered.
old 1: ALTER USER oe TEMPORARY TABLESPACE &ttbs
new 1: ALTER USER oe TEMPORARY TABLESPACE temp
User altered.
Grant succeeded.
Connected.
Session altered.
Session altered.
SP2-0310: unable to open file "C:\oracle\product\10.2.0\db_1/demo/schema/order_entry/coe_10.2.0"
SP2-0310: unable to open file "C:\oracle\product\10.2.0\db_1/demo/schema/order_entry/loe_10.2.0"
SP2-0310: unable to open file "C:\oracle\product\10.2.0\db_1/demo/schema/order_entry/poe_10.2.0"
Session altered.
...creating subschema OC in OE
Type created.
Type body created.
Table created.
FROM inventories i, warehouses w
ERROR at line 6:
ORA-00942: table or view does not exist
FROM product_information p
ERROR at line 10:
ORA-00942: table or view does not exist
FROM customers c
ERROR at line 20:
ORA-00942: table or view does not exist
FROM customers c
ERROR at line 20:
ORA-00942: table or view does not exist
FROM customers c
ERROR at line 20:
ORA-00942: table or view does not exist
FROM orders o
ERROR at line 9:
ORA-00942: table or view does not exist
ON oc_orders FOR EACH ROW
ERROR at line 2:
ORA-00942: table or view does not exist
TABLE order_item_list OF oc_orders FOR EACH ROW
ERROR at line 2:
ORA-00942: table or view does not exist
Commit complete.
FROM oc_product_information o
ERROR at line 4:
ORA-00942: table or view does not exist
FROM oc_product_information o
ERROR at line 4:
ORA-00942: table or view does not exist
FROM oc_product_information o
ERROR at line 4:
ORA-00942: table or view does not exist
FROM oc_product_information o
ERROR at line 4:
ORA-00942: table or view does not exist
FROM oc_product_information o
ERROR at line 5:
ORA-00942: table or view does not exist
FROM oc_product_information o
ERROR at line 4:
ORA-00942: table or view does not exist
FROM oc_product_information o
ERROR at line 5:
ORA-00942: table or view does not exist
FROM oc_product_information o
ERROR at line 5:
ORA-00942: table or view does not exist
FROM oc_product_information o
ERROR at line 4:
ORA-00942: table or view does not exist
FROM oc_product_information o
ERROR at line 4:
ORA-00942: table or view does not exist
FROM oc_product_information o
ERROR at line 4:
ORA-00942: table or view does not exist
FROM oc_product_information o
ERROR at line 4:
ORA-00942: table or view does not exist
FROM oc_product_information o
ERROR at line 4:
ORA-00942: table or view does not exist
FROM oc_product_information o
ERROR at line 4:
ORA-00942: table or view does not exist
FROM oc_product_information o
ERROR at line 4:
ORA-00942: table or view does not exist
FROM oc_product_information o
ERROR at line 5:
ORA-00942: table or view does not exist
FROM oc_product_information o
ERROR at line 4:
ORA-00942: table or view does not exist
FROM oc_product_information o
ERROR at line 4:
ORA-00942: table or view does not exist
1 row created.
1 row created.
1 row created.
1 row created.
Type altered.
3 rows updated.
0 rows updated.
0 rows updated.
0 rows updated.
Commit complete.
Type body altered.
Type body altered.
Type body altered.
PL/SQL procedure successfully completed.
SQL>
Like i can figure out that the "version in parameter 8" has something to do with the coe, poe & loe files
but i don't know what.
If somebody can please help me with my questions then i know i can move on.
Thanks
Edited by: user11216992 on Jun 14, 2010 3:37 PM

Newb needs help with dynamic text

Hi Everyone,
I don't like being a newb - but that's how it is...
I'm trying to create a multipage registration form that
allows uses to register products.
The first page asks for name etc, and on the second page I
want it to say "Welcome "+username "!" - that sort of thing...
The problem is I can't get it to keep the dynamic text values
accross the pages.
I can get it to repeat the input on the first page with this
code:
_root.firstname_txt.onChanged = function() {
_root.firstname_repeat.text="Hello
"+_root.firstname_txt.text;
However when I call it on the second page it is undefined:
second_repeat.text="hello "+_root.firstnamt_txt.text;
trace (_root.second_repeat.text);
I'm sure this is something simple and I'm just a programming
dunce...
Any help is appreciated.
ta

if your textfield (_root.firstname_repeat) doesn't exist on
the 2nd frame, its text property will be undefined.
to remedy, either extend your textfield's existance into the
frames needed or use a variable to store its text property (in your
onChanged handler) and use that variable to retrieve the value you
need.

Newbie needs help with multiple devices?

Hi and best wishes to all.
I could really use some advice on the following.
I purchased an iPhone and set it up on my PC in the normal way.
A few months later, my Creative Vision battery died, and Creative's only advice
was "buy a new one!". No chance Mr. Creative! If you call that customer care, I'm moving to Apple! So I purchased a 64Gb iPod Touch and installed that.
I must admit to a little difficulty trying to manage both devices in iTunes, but I'm also willing to admit that if I found the time to read the manuals, I'd probably get it right!
My main query is this:
I now use a second laptop when I'm away from my office and I want to mirror my main PC with my portable one, so that I can manage the iPhone and iPod on both machines.
Any advice on all of the above would be greatly appreciated.
Thaks in advance to all, and very best wishes!

rf4c wrote:
Hi and best wishes to all.
I could really use some advice on the following.
I must admit to a little difficulty trying to manage both devices in iTunes, but I'm also willing to admit that if I found the time to read the manuals, I'd probably get it right!
Reading manuals is so 20th century. Instead watch this helpful video, courtesy of The New York Times: Yo Jude: Many iPods; One Computer.
The question of mirroring the library on multiple machines is quite a bit more complicated. Take a look at this support article: iTunes 9: Understanding Home Sharing.

Newbie needs help with MS exchange / MS Push email

I just got an iPhone 3G a few days ago. Heretofore, all my experience has been with HTC, Motorola and Blackberry phones. As a non-technical person trying to make Pust work through my network is very confusing.
I read the instructions / bulletins and finally made email and calendar work (sort of). It only works on WiFi and then I have to manually update mail as it does not always Push.
Does the iPhone Push setup only work with Server 2003 / Push via WiFi? If not, can anyone give me step by step instructions on how to make it work with 3G and no WiFi?
If possible, please be specific as I am a newbie trying to make this work for my small company.
If I can't find a solution I'll have to get rid of this and go back to something that works.
It seems that Apple is making it very difficult to set this phone up for Push application
Thanks,
Gary

The iPhone works fine over cellular. You did mention a certificate - I am going to guess that this may be the issue.
If you open Safari on the iPhone and connect to your OWA, do you get a warning? When you viewed the cert in IE, is it self-signed? If so you need to get it on the iPhone. The easiest way is to set up gmail or something similar on iPhone and email it to yourself.
when it come in email your iPhone will immediately recognize it as a file that you can import it. Select it and import it, then you should be able to connect to your Outside Exchange server.

Need Help with boot camp install, keep getting message can not install need

Hi Folks,
I keep getting a message that the boot camp assistant can not install needs firmware update. All updates are currently installed. I have tried all available updates and hey ell me the computer doesn't need them????
Any help that you may provide is greatly appreciated.
Jack
P.S. The computer is an Imac early 2006 1.83 gb.
Machine Name: iMac
Machine Model: iMac4,1
CPU Type: Intel Core Duo
Number Of Cores: 2
CPU Speed: 1.83 GHz
L2 Cache (shared): 2 MB
Memory: 1 GB
Bus Speed: 667 MHz
Boot ROM Version: IM41.0039.B00
Serial Number: W86220MSU2N
SMC Version: 1.1f5

You do not have the firmware update installed. You only have the SMC firmware update. Boot Camp requires this firmware update.

Newbie, need help with online poker install

Similar Messages

Maybe you are looking for