Newbie need help with Web BEx setup!

Out of curiosity, I decided to install Netweaver so I can have a play with it. I am a complete newbie to Netweaver therefore I apologise if this is out of context...
Here's my question:
How do one go about getting Web BEx to work?
Whenever I activate the link in the portal, I get an error about unknown "SWITCH_AXES" command and 0ANALYSIS type 4 error. I search the forum and the few passing mentions of the problem points to OSS notes that is only accessible through service marketplace (which I don't have an ID). I have check the object types in BI content and seems that 0ANALYSIS is already activated. There must be something I am missing. Tried blindly and randomly installed other BI content (mostly Web templates and objects) but to no avail (and encounted a few short dumps).
Any help is greatly appreciated!
So far, here're what I did:
1) Install Netweaver 2004S ABAP and Java on the same machine. Instance 00, 01 and 02 respectively.
2) Try to run BI-Java template installer, but met with error part way. So some of the steps are done manually.
3) Set up SLD (both instance are in the landscape), and 'partially' set up SSO. Partially as while JAVA to ABAP seems to work, ABAP to JAVA is not working. Anoying but livable.
4) Installed TREX (instance 03) and are seen by ABAP and JAVA.
5) ABAP is seen in the portal and I can create transactional iviews and put them in the Portal (with working SSO).
6) Did reverse-proxying with Apache, but I don't think it matters as it seems to be a backend module issue.
7) Business planning/wizard is working (in ABAP and Portal) as is Broadcast. As you can see, Web BEx is the only thing that is not working

The default link for Web Analyser in EP 7 seems to point to the new template. When opening the analysis template in the new BEx windows tool, the same error is being reported. Using 3.5.x WAD, I can't locate the template.
More on this issue Although for that case, the meta data is not installed. Is there a way to trace missing component and reinstall the needed BI content in RSA1?
BTW, these are on JAVA SP9 and ABAP SP11.

Similar Messages

Installing Elements 11 on Mac. Need help with install error "Setup wants to make changes."

Installing Elements 11 on Mac 10.8.2. Need help with install error: Setup wants to make changes. Type your password to allow this." After entering Adobe password, nothing happens. Locked from further installation. Any ideas? Adobe phone support could not help.

Just before letting changes (installation in this case) be made on the system, Mac OS prompts for password & this has to be the Mac system password. This password prompt is the system's own native prompt & would accept the system password only. Please make sure it is the right system password (all/admin rights) and the installaion should run.

Newbie needs help with browser compatibility

Ok, so I'm new at this, so this may be something really
simple, but browser compatibility? I made a site in DW;html and it
shows up perfect in safari but internet explorer and firefox not so
much. I did a browser compatibility test in DW and it says nothing
is wrong with my pages, but obviously something must be!!
On my home page, the image of a house that I have next to the
company name shows up fine in safari but not any other browsers.
And my page layout, everything is moved over funny in other
browsers. Also there are link boxes around the table I created with
different brands of products. On safari the boxes do not show, but
all the other browsers it does!! I'm new at this and frustrated!!!
Need help!!
The link is holmeshifi.com and I posted code from the home
page!

OK thanks Ned sorry to soo dumb I'm on a learning curve here! what
I'm trying to do is go to the URLs of web galleries of images from my
main site
so I would presumably have to rename them on my server? i.e. does that
mean adding the code ", "_blank");
to the files on the server?
At the moment I have to use the back button on my browser window which
takes me back to the main site which then has to reload (tediously!)

Newbie needs help with Flex app

Hi there. I am very new to Flex and also fairly new to
programming although I do have a little experience.
I am trying to create an app which stores code snippets or
common text I tend to use every day in my documents and emails.
So basically I need help on a design level. I can refer to
the developer's manual for exact instructions for commands, but I
need to know what to code first.
The app will consist of:
-a tree directory structure where I can create groups.
-There will be a basic text editor where I input all my data,
basic text formatting options (font, bullets etc) would be a bonus.
-A search function
-Finally it will ideally allow multiple client apps write to
a central database file over a network
Can anyone suggest how I should approach such a project?
Or are there any tutorials / source files which demonstrate
each bullet point?
thanks.

Hey jono,
I'm new too. But I think I might know the right components.
If you google any of these + flex 3 you should get some
decent documentation
tree - advanced dataGrid component
basic text editor - rich text editor component
search function - well, you're gonna need to read up on
arrays, and arraycollection. Once you get that stuff working, you
can write up a function to search for a string in an array.
network functionality - HTTPService, you can dump the
datagrid into a database, and have it load the database when you
open up the application.
Give these things a shot, tutorials / sources will come with
the google searches.

Need Help With ACS LDAP setup to Query AD

I have 2 Win 2003 ADs, one of them is configured and working under Windows Database (using remote agent) configuration. I am trying to setup the second AD with Generic LDAP setup. I want to know what exactly I should use in the fields UserObjectType and Class, and GroupObjectType and Class for Windows 2003 AD. All Cisco documents give example of Netscape LDAP syntax. I was told by our server admin. what to put under Admin DN, CN=myid,OU=mygroup,OU=myorg,DC=mydomain,DC=com
I have both user & group directory subtree fields filled with DC=mydomain,DC=com.
I am using the ip address for Primary LDAP server, and port is 389, LDAP version 3 is checked.
Is any of these DC, OU, etc. case sensitive?
With all entries that I have tried, when I go to map a group, I am getting error "LDAP server NOT reachable. Please check the configuration". My ACS can ping the domain controller's IP address fine.
Please help. Thank you in advance,
Murali

Murali,
These references may help...
http://download.microsoft.com/download/3/d/3/3d32b0cd-581c-4574-8a27-67e89c206a54/uldap.doc
http://www.microsoft.com/technet/archive/winntas/plan/dda/ddach02.mspx?mfr=true
http://technet.microsoft.com/en-us/library/aa996205.aspx
Regards,
Richard

MSI P67A-C45 (B3) Newb needs Help with connections..

Hi all..
First time posting here, but have been in the shadows for quite a while..
Anyway, i decided to finally take the plunge, and build my own PC, and now i'm beginning to hit a few bumps.
I have a couple of questions that i would like some help with, if possible to reassure myself i may be in the right direction..
I bought THIS PSU and was hoping someone could tell me where the Blue connectors (one labelled CP and one labelled U1) Connect to?
Is it into JPWR2? And does it/do they only connect in the correct way? (Do i remove the plastic cap and attach both?
and i bought THIS VIDEO/GRAPHICS CARD and i'm guessing the RED "PCI express" and "SLI ready" connect to that somehow (Haven't opened box yet for card)
Again, wondering is there a certain way for them to connect.
Also, from my chassis, the "AC '97" and "HDA" connectors go to JAUD (I guess), does it matter which one? (I currently have "HDA" connected)
I have i5 2500k already on board. (If that makes a difference).

Quote from: Ben_Cartwright on 26-May-11, 22:05:35
Do the Audio plugs go into JAUD? and does it matter which one?
Yep, connect the front panel audio to the JAUD. If you need the pin layout, it says in the manual. I would say the HDA connector is the one to connect.
Quote from: Ben_Cartwright on 26-May-11, 22:05:35
Any recommendations for testing it all, before i plug it in, and press the power?
Should i (Can i) test individual parts first?
Thanks again.
Check all power connections, seating of the RAM and add-on cards, check the HSF is plugged into the fan header, and obvious things like that.
As for testing, enter the BIOS and make sure the CPU isn't running too hot. Set up the RAM with the required timings and voltage, and test with >>Memtest86<< for several hours. No point starting the Windows installation if say your RAM has errors, since it will corrupt files during the install, if it installs at all.

Storm user newbie needs help with appcenter

hi everyone. i need help regarding my blackbeery storm 9500. i bought from a friend but he only gave the charger and the the phone. there is no app center. is there anyway i could get the appcenter so that i can get the bbmessenger?

You can download BBMessenger from your Blackberry browser at www.blackberry.com/bbm
AppWorld: www.blackberry.com/appword
You must have the BlackBerry Data Plan on your device to use either of those services.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Please need Help with web application deployment in Jdeveloper 12c

Hi,
I am desperate for help guys. am trying to deploy a web application in weblogic server, but nothing works!!
I created a project in jdeveloper and created a jsp page inside the project, all what i want is to run that page!
I followed the instruction here: Deploying Fusion Web Applications , I don't really know if i did it right or wrong, the document is too detailed and not understood clearly.
I am a newbie oracle user, and trying to build jsp web application connected to oracle database. application deployment fails it says: cannot run application error deploying IntegratedWeblogic..
please could you tell me the steps of application deployment in Jdeveloper 12c?
what deployment profiles I need to create (ear, war , mar)?
what deployment descriptor I need for my app to work?
please guys I am newbie to oracle, if you could give me simplified answers and straight instructions it will be appreciated .
thank you

hi Timo,
I am building a local web application, meaning the server is internal and will not connect to the web, only to local pcs via network. the application will insert/select data from the database server. My company wants to embed oracle technology on the datatabse and that what am trying to. I am not that expert in java and oracle in general, my main knowledge are in php, html and mysql programming. through my long internet research a lot has recommended jsp with html to be a good choice.
At beginning I played around with ADF faces, I found it annoying because I prefer coding than using drag and drop interfaces, which always create unwanted results.
Also am not that professional java programmer, i started learning jsp and found it easier.
What I am thinking of is to make a web based application that works in browsers (like php), this application has forms to insert data, and also has forms to output data for printing. that's all. I tried to make it in php, but through my little knowledge and internet researches it seems php does not work with oracle and java is the recommended choice (or it works with php but too complicated to make it)
any recommendation will be much appreciated
thank you

Newbie needs help: Authorware Web Player for Intel Mac OS X

Hi guys,
Complete newbie here in need of assistance please.
I am using a Intel MacBook Pro 3.1 (early 2007) running Leopard OSX 10.5.8
Have paid to do basic computer Microsoft Office course via net. College still uses MS 2003 and so I bought Office for Mac 04 as I was told all
I needed to be able to do this course was to be able to open office docs via email.
Have just received the course book and page 2 tells me to download Macromedia Flash and Authorware Web Players 5 and 7.
Flash loads without a glitch. Went to Adobe-Downloads-Web Players page, scrolled down to Authorware player which lists both a compact and a complete version of Web Player 7 for OS X on Safari. But here's the kicker - it specifically states for Power PCs. I tried to download it anyway and
of course it will not load. So I am apparently up the proverbial creek as far as the course goes.
So my question is this: Has Adobe just wiped its hands of all mac users of this app once Apple changed to the Intel architecture?
Or does anyone know of a work around or another app that can help me out of this problem?
Any help or advice would be greatly appreciated as I am supposed to have started this course and unbelievably cannot get past page 2!
Cheers and thanx in advance
Yours
Micki

Hi everyone,
Just thought I would give you an update on my problem. I was contacted by the lovely Matt from Adobe customer care, who was right on the ball as far as accessing my problem and was as helpful as can be. I just thought I would post his reply to my email to let everyone here know that Adobe do have a customer care line and people there to help us.
From Matthew:
Hello bmw14,
First, if you send me your phone number, I can call you directly to try to resolve your issue more quickly.
With regards to the problems you’re having, the course book is probably indicating these older Flash and Authorware Player versions simply because they were contemporary when the book was authored. The Player teams put a lot of work into ensuring that new versions can play any content that worked in the previous versions. So my recommendation is to uninstall any older versions, and just install the most recent versions of the players. These should be capable of playing any content that was authored for use by players 5 & 7 ,etc.
Let me know if this helps, or if you’d like a call, or if we should consider the problem solved.
Sincerely,
Matthew

Need help with QoS config/setup for my home network.

I have a home network that spans two buildings, has and FTP download server, VoIP phones,and several computers among other IP devices. I run a home based business where my clients get access to the company FTP download server (NOT illegal file sharing). the problem is that when they are downloading files my VoIP takes a big hit and gets choppy when speaking to my customers. Below is the layout of the network.
Our Internet access is Verizon 4G, there are no other options available at this time or we would switch. The Verizon 4G MiFi connects to a TP-Link wifi router that then connects to port fa0/5 on the Office 3550PoE switch. There is a trunk between the Office switch to the House 3550PoE switch. The House switch then connects to the Shop 3524XL switch also using a trunk. Please note that EVERYTHING works fine other than the VoIP issue, VoIP makes and receives calls without connections issues.
Auto QoS has been run on the Office switch ports fa0/1 and fa0/2 as well as on the House switch ports fa0/3 and fa0/5. There is NO auto QoS on the 3524XL
What is the best way to give VoIP traffic top priority over FTP and web browsing when going out port fa0/5 on the Office Switch? Over the internal network we are not having any call quality issues between the IP phones, just calls to our SIP provider. Yes, I understand that once calls exit the Office switch to the TP-Link wifi router there will not be any QoS. But, if I can give priority to the packets at the layer 3 Office switch (or wherever you suggest) then at least I will not have to kill a users FTP download while I am on the phone.
Thank You

I can make ANY changes necessary, just need to know what to do.
First, did you notice the output of the command sh mls qos fa0/5 above? Is it working correctly?
Next, Yes I do have version W17 and can install if if needed. The lost of possible commands I listed above was from the conf t - config interface fa0/x level. There is class and policy mapping commands the the config global level along with all these other commands:
aaa                         Authentication, Authorization and Accounting.
access-list                 Add an access list entry
alias                       Create command alias
arp                         Set a static ARP entry
banner                      Define a login banner
boot                        Boot Commands
buffers                     Adjust system buffer pool parameters
cdp                         Global CDP configuration subcommands
cgmp                        Global CGMP configuration commands
class-map                   Configure QoS Class Map
clock                       Configure time-of-day clock
cluster                     Cluster configuration commands
default                     Set a command to its defaults
default-value               Default character-bits values
downward-compatible-config Generate a configuration compatible with older software
enable                      Modify enable password parameters
end                         Exit from configure mode
errdisable                  Error disable
exception                   Exception handling
exit                        Exit from configure mode
file                        Adjust file system parameters
help                        Description of the interactive help system
hostname                    Set system's network name
interface                   Select an interface to configure
ip                          Global IP configuration subcommands
line                        Configure a terminal line
logging                     Modify message logging facilities
mac-address-table           Configure the MAC address table
map-class                   Configure static map class
map-list                    Configure static map list
mvr                         Enable/Disable MVR on the switch
no                          Negate a command or set its defaults
ntp                         Configure NTP
policy-map                  Configure QoS Policy Map
power                       power configuration
priority-list               Build a priority list
privilege                   Command privilege parameters
queue-list                  Build a custom queue list
rmon                        Remote Monitoring
scheduler                   Scheduler parameters
service                     Modify use of network based services
shutdown                    Shutdown system elements
snmp-server                 Modify SNMP parameters
spanning-tree               Spanning Tree Subsystem
stackmaker                  Specify stack name and add its member
tacacs-server               Modify TACACS query parameters
tftp-server                 Provide TFTP service for netload requests
time-range                  Define time range entries
udld                        Configure global UDLD setting
username                    Establish User Name Authentication
vmps                        VMPS settings
vtp                         Configure global VTP state

Newbie needs help with MS exchange / MS Push email

I just got an iPhone 3G a few days ago. Heretofore, all my experience has been with HTC, Motorola and Blackberry phones. As a non-technical person trying to make Pust work through my network is very confusing.
I read the instructions / bulletins and finally made email and calendar work (sort of). It only works on WiFi and then I have to manually update mail as it does not always Push.
Does the iPhone Push setup only work with Server 2003 / Push via WiFi? If not, can anyone give me step by step instructions on how to make it work with 3G and no WiFi?
If possible, please be specific as I am a newbie trying to make this work for my small company.
If I can't find a solution I'll have to get rid of this and go back to something that works.
It seems that Apple is making it very difficult to set this phone up for Push application
Thanks,
Gary

The iPhone works fine over cellular. You did mention a certificate - I am going to guess that this may be the issue.
If you open Safari on the iPhone and connect to your OWA, do you get a warning? When you viewed the cert in IE, is it self-signed? If so you need to get it on the iPhone. The easiest way is to set up gmail or something similar on iPhone and email it to yourself.
when it come in email your iPhone will immediately recognize it as a file that you can import it. Select it and import it, then you should be able to connect to your Outside Exchange server.

Newb needs help with dynamic text

Hi Everyone,
I don't like being a newb - but that's how it is...
I'm trying to create a multipage registration form that
allows uses to register products.
The first page asks for name etc, and on the second page I
want it to say "Welcome "+username "!" - that sort of thing...
The problem is I can't get it to keep the dynamic text values
accross the pages.
I can get it to repeat the input on the first page with this
code:
_root.firstname_txt.onChanged = function() {
_root.firstname_repeat.text="Hello
"+_root.firstname_txt.text;
However when I call it on the second page it is undefined:
second_repeat.text="hello "+_root.firstnamt_txt.text;
trace (_root.second_repeat.text);
I'm sure this is something simple and I'm just a programming
dunce...
Any help is appreciated.
ta

if your textfield (_root.firstname_repeat) doesn't exist on
the 2nd frame, its text property will be undefined.
to remedy, either extend your textfield's existance into the
frames needed or use a variable to store its text property (in your
onChanged handler) and use that variable to retrieve the value you
need.

Crypto newb: Need help with encrypting data for offline Swing app

Hi all,
I'm VERY new to cryptography. Can somebody point me in the right direction? I've created a Swing application that is intended to be used offline (no network connections are established by the app). I need to export XML files from this application, to be transported via floppy to another instance of the application on a different computer for import. The information is sensitive and must be encrypted!
I started looking into AES and using asymmetric ciphers (public/private key encryption). But then I realized that if Jane is exporting a file for Bob to view, she won't have access to Bob's public key (no network access). Ugghh!
I noticed another solution in this forum where the person suggested using password encryption. It was an old post and I think it used DES. Anyway, password encryption doesn't seem too secure.
So, I thought I'd create a symmetic key (correct term?) once, store it in the program directory, and distribute it with the application installer. That way, everyone would have the same key and would be able to encrypt/decrypt each others files. Right? Err... I'm not sure.
Like I said, I'm a newb at crypto. If someone could suggest the best/most secure way to accomplish this, I would be eternally grateful.
PLEASE HELP!!! :-D
Thanks in advance.

Sorry, Grant. I must've posted that last one just
after your response. I was intending the message to
be for Anand. Heh - you have no idea how many times I've done the same thing. It's an artifact of the asynchronous nature of message boards.
Your response is very helpful. Out of
curiosity, does my last post provide any more insight
that would change your mind? Or do you still believe
that using password encryption and letting the user
choose/provide the password is the best solution?Well, as you noted, giving everyone two sets of keypairs is semantically equivalent to giving everyone a single symmetric key. And, as I've noted, it's completely INsecure - everyone who gets access to an install disk, either legitimately or no, can read every transmission your app makes forever after. Cryptographically speaking, this is Not A Good Thing.
The advantage of PBE is that it's easy for your users to exchange keys when their machines can't see each other. The real key here is that your app, if you really want it to be secure, MUST allow/require that transmission between Alice and Bob use a different key than that between Alice and Carlos or Bob and Carlos - otherwise, if Eve compromises any user of your software, ALL users are compromised.
I'd go with PBE, just because other alternatives are painful for your end users. You could use generated KeyPairs, for example, if you provide a means for users to exchange public keys. If you display Bob's public key in encoded, String-able form, then Bob can either email that to Alice or read it off to her over the phone. Into your app Alice loads/types in that public key, and the app now knows how to secure communications with Bob.
Public keys are large, though, and people screw them up typing them in. And many users have TERRIBLE key discipline - if Bob loses access to his private key, he can't read anything Alice sends. And if his private key is readable on some public shared folder (which happens with a totally-frightening regularity), then we're back to no security at all.
Use one of the triple-DES PBE Ciphers, and get on with making your app do what you really want it to do, would be my advice. (Free advice, of course, being worth every penny you pay!)
Once again, thanks a bunch!Glad to help.
Grant

Oracle SQL Newbie need help with OE Demo Schema Installation

Hello everybody !
I'm hoping some kind soul can help out this SQL newbie.
First of all i've installed 10g R2 database on a PC running XP SP2.
Oracle is installed on the root C: drive
I'm using the SQL Fundamentals I Exam Guide and DBA Handbook (Both Oracle Press)
as my reference.
My problem is this.
I installed the DB and created the demo HR schema without too much problem
but it's the demo OE schema i'm having problems getting running and cannot
find anywhere on the net that outlines a step by step SQL process.
I am using SQL Plus to execute these commands.
My questions are these:
-For the default tablespace i specify "users" ?
-What do i specify for the temporary tablespace ? "temp" ?
-what directory path do i put for the data files as parameter 6 ?
I put down "C:\oracle\product\10.2.0\db_1\demo\schema\order_entry" but i suspect it's
the wrong thing ?
-What do i specify for the writable directory path for the log files ?
Is it C:\oracle\product\10.2.0\RDBMS\log
-And what is "Specify version as parameter 8:" line ?
I assumed it was the db version but i believe it's wrong.
Could somebody please help me ? I've already done my CCNA and i wanted to add oracle under my belt.
I know if i had these few things cleared up for me it would pave the way to actually enjoying learning Oracle :)
Thank you for any assistance :)

I installed the DB products from the companion disk and there was no specific mention of the demo schemas. Regardless... They're all there within the demo subfolder and have already created the hr schema.. I just need somebody (I'll pay if necessary) to PLEASE just answer (what would be easy to you guys my questions so i can move on.
this is a cap from my sql plus..
SQL*Plus: Release 10.2.0.1.0 - Production on Mon Jun 14 15:01:29 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL> alter user oe account unlock identified by oe;
User altered.
SQL>
specify password for OE as parameter 1:
Enter value for 1: mewfymewf
specify default tablespeace for OE as parameter 2:
Enter value for 2: users
specify temporary tablespace for OE as parameter 3:
Enter value for 3: temp
specify password for HR as parameter 4:
Enter value for 4: mewfymewf
specify password for SYS as parameter 5:
Enter value for 5: mewfymewf
specify directory path for the data files as parameter 6:
Enter value for 6: C:\oracle\product\10.2.0\db_1\demo\schema\order_entry
writeable directory path for the log files as parameter 7:
Enter value for 7: C:\oracle\product\10.2.0\db_1\RDBMS\log
specify version as parameter 8:
Enter value for 8: 10.2.0
User dropped.
old 1: CREATE USER oe IDENTIFIED BY &pass
new 1: CREATE USER oe IDENTIFIED BY mewfymewf
User created.
old 1: ALTER USER oe DEFAULT TABLESPACE &tbs QUOTA UNLIMITED ON &tbs
new 1: ALTER USER oe DEFAULT TABLESPACE users QUOTA UNLIMITED ON users
User altered.
old 1: ALTER USER oe TEMPORARY TABLESPACE &ttbs
new 1: ALTER USER oe TEMPORARY TABLESPACE temp
User altered.
Grant succeeded.
Connected.
Session altered.
Session altered.
SP2-0310: unable to open file "C:\oracle\product\10.2.0\db_1/demo/schema/order_entry/coe_10.2.0"
SP2-0310: unable to open file "C:\oracle\product\10.2.0\db_1/demo/schema/order_entry/loe_10.2.0"
SP2-0310: unable to open file "C:\oracle\product\10.2.0\db_1/demo/schema/order_entry/poe_10.2.0"
Session altered.
...creating subschema OC in OE
Type created.
Type body created.
Table created.
FROM inventories i, warehouses w
ERROR at line 6:
ORA-00942: table or view does not exist
FROM product_information p
ERROR at line 10:
ORA-00942: table or view does not exist
FROM customers c
ERROR at line 20:
ORA-00942: table or view does not exist
FROM customers c
ERROR at line 20:
ORA-00942: table or view does not exist
FROM customers c
ERROR at line 20:
ORA-00942: table or view does not exist
FROM orders o
ERROR at line 9:
ORA-00942: table or view does not exist
ON oc_orders FOR EACH ROW
ERROR at line 2:
ORA-00942: table or view does not exist
TABLE order_item_list OF oc_orders FOR EACH ROW
ERROR at line 2:
ORA-00942: table or view does not exist
Commit complete.
FROM oc_product_information o
ERROR at line 4:
ORA-00942: table or view does not exist
FROM oc_product_information o
ERROR at line 4:
ORA-00942: table or view does not exist
FROM oc_product_information o
ERROR at line 4:
ORA-00942: table or view does not exist
FROM oc_product_information o
ERROR at line 4:
ORA-00942: table or view does not exist
FROM oc_product_information o
ERROR at line 5:
ORA-00942: table or view does not exist
FROM oc_product_information o
ERROR at line 4:
ORA-00942: table or view does not exist
FROM oc_product_information o
ERROR at line 5:
ORA-00942: table or view does not exist
FROM oc_product_information o
ERROR at line 5:
ORA-00942: table or view does not exist
FROM oc_product_information o
ERROR at line 4:
ORA-00942: table or view does not exist
FROM oc_product_information o
ERROR at line 4:
ORA-00942: table or view does not exist
FROM oc_product_information o
ERROR at line 4:
ORA-00942: table or view does not exist
FROM oc_product_information o
ERROR at line 4:
ORA-00942: table or view does not exist
FROM oc_product_information o
ERROR at line 4:
ORA-00942: table or view does not exist
FROM oc_product_information o
ERROR at line 4:
ORA-00942: table or view does not exist
FROM oc_product_information o
ERROR at line 4:
ORA-00942: table or view does not exist
FROM oc_product_information o
ERROR at line 5:
ORA-00942: table or view does not exist
FROM oc_product_information o
ERROR at line 4:
ORA-00942: table or view does not exist
FROM oc_product_information o
ERROR at line 4:
ORA-00942: table or view does not exist
1 row created.
1 row created.
1 row created.
1 row created.
Type altered.
3 rows updated.
0 rows updated.
0 rows updated.
0 rows updated.
Commit complete.
Type body altered.
Type body altered.
Type body altered.
PL/SQL procedure successfully completed.
SQL>
Like i can figure out that the "version in parameter 8" has something to do with the coe, poe & loe files
but i don't know what.
If somebody can please help me with my questions then i know i can move on.
Thanks
Edited by: user11216992 on Jun 14, 2010 3:37 PM

Need help with Pixi Plus setup on Telstra Australia

If any one can help i would be very grateful.
I'm in Australia and wanted to try out a WebOS phone as a replacement for my Treo 680.
I did the research and found that AT&T GSM phones will work here in Australia.
I found a new unactivated Pixi Plus on eBay, as it was the same WebOS as Pre thought i would give it a try and bought it.
So my new Pixi Plus arrived three weeks ago, put my sim in and found it was locked to AT&T. I rang AT&T and was told it will be locked till end of December because of there system. The eBay seller said it was locked and may be able to be unlocked.
I found a way around this problem as i didn't want to wait that long.
I ordered a Rebelsim Card that arrived a few days ago, put it in and seems to work. Now have Telstra Mobile in the top corner.
Now my problem really starts.
I can't get onto the web to activate and set up my '' cloud ''
My phone is asking for APN:
I have tried:
telstra.iph
telstra.internet
Nothing works.
I can't get out of this screen without a APN:
This APN: thing i didn't find out untill i got the phone. Can't find much info at all on the subject.
Why is Palm making it so difficult, don't they want to sell phones.
Had no problems with my 650 and 680's bought form overseas.
Can anyone point me in the right direction please.
Thanks
Peter
Post relates to: Pre Plus p100una (AT&T)

Called Sonos, they got me all setup.

Newbie need help with Web BEx setup!

Similar Messages

Maybe you are looking for