Newbie Needs Help Please - VoIP and VPN

Hello,
I have a question about some voip/vpn configuration. I've got two sites that have 1760 routers with fxo/fxs cards that are going to be tieing the two phone systems together with a couple of voip trunks. These are secondary devices on the network with no data traffic or real LAN even, but addressed with a 2nd wan ip on the fa 0/0 port. The only traffic going through these routers is voice/voip.
My question is about this voip setup with vpn. First off, should I or shouldn't I, or even can I? If I configure a site-to-site vpn connection, will the voip traffic pass over that? How would I set up a VPN tunnel for only the fxo/fxs cards with no "LAN" behind it? Is there a need to have a vpn? Any benefits to sending the voip data across vpn, other than the obvious encryption of the "call"?
The thing is, I've only setup a VPN with Cisco a few couple of times, and once was from a pre-configured script I found and the other was from some software called SDM. I've only known about setting up VPN's for connecting the LAN behind router A to the LAN behind router B. This setup has NO LAN. The only interfaces are the fa 0/0 (getting static wan ip), and the fxo and fxs cards handling the voice. I have no clue on how to configure a site-to-site VPN for this, or if I even can, or if I should.
The next two replies will have my voip configuration as it sits on the bench in testing; I have both fa 0/0 interfaces connected to the local LAN just for a connection and testing, but each will later be getting it's own static WAN IP on the fa 0/0 interfaces:

SITE 1:
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname SITE 1
boot-start-marker
boot-end-marker
enable secret XXX
no aaa new-model
voice-card 2
voice-card 3
ip cef
interface FastEthernet0/0
ip address 192.168.254.30 255.255.255.0
speed auto
no shutdown
no ip http server
no ip http secure-server
control-plane
voice-port 2/0
connection plar opx 290
voice-port 2/1
connection plar opx 291
voice-port 2/2
voice-port 2/3
voice-port 3/0
connection plar 190
voice-port 3/1
connection plar 191
voice-port 3/2
voice-port 3/3
dial-peer voice 180 pots
destination-pattern 180
port 2/0
dial-peer voice 181 pots
destination-pattern 181
port 2/1
dial-peer voice 190 voip
destination-pattern 19
session target ipv4:192.168.254.40
line con 0
logging synchronous
line aux 0
line vty 0 4
password xxx
logging synchronous
login
transport input telnet
end

Similar Messages

  • Newbe needs help, please

    I created buttons.swf with buttons 1-7 and a few other swf
    file ( movie1.swf, movie2.swf......,movie7.swf.)
    My intention is to place buttons.swf file into website (html
    document) and each click on button would load correspondent movie.
    Click on button1 would load movie1.swf on my website, click on
    button2 would load movie2.swf and so on. Problem is that I don'y
    know how to make it work. If you know please help.....:-)
    I'm sure this must be simple, and probably I need some action
    script knowlage which I don't have.
    Appreciate very much your help
    JM

    I created buttons.swf with buttons 1-7 and a few other swf
    file ( movie1.swf, movie2.swf......,movie7.swf.)
    My intention is to place buttons.swf file into website (html
    document) and each click on button would load correspondent movie.
    Click on button1 would load movie1.swf on my website, click on
    button2 would load movie2.swf and so on. Problem is that I don'y
    know how to make it work. If you know please help.....:-)
    I'm sure this must be simple, and probably I need some action
    script knowlage which I don't have.
    Appreciate very much your help
    JM

  • Newbie needs help Please - mail problems

    Help Needed Please.
    First of all it started a couple of weeks ago i would enter my mail and receive a message saying that the IMAP server didnt reconise
    my password even though i was entering it correctly. My email address i have kept when i chan ged from BT over to Virgin.
    But we have had the imac 6 months now and its beeen performing brilliant.
    Anyway like a idiot i tried to change settingxs and try different options, and now i have wiped my keychain (even tho got no idea what a keychain is)
    and my email settings are messed up.
    Didnt know if i should do a system restore??
    Any Genius at there thanks in advance and im sure your all kringing with my lack of mac knowledge
    this is the first Mac ive ever brought always been a windows
    Mac's the way love it

    Somewhere (hopefully) you will have a note of your email user name and password provided by your ISP.  It should note the server addresses for ingoing and outgoing servers. If you haven't got these details they are likely available on the FAQs of your ISPs website.
    Assuming you are using Apple's Mail app for email the route to adding/editing the relevant data is:
    Mail>Preferences>Accounts tab. You then need to add/edit the data under the various tabs. Check that the SMTP server has all the correct details by clicking in the drop-down menu and selecting 'Edit SMTP server list'. Make sure the details are correctly entered.

  • Itunes newbie needs help please :)

    Hi,
    I've just got a 30gb ipod and downloaded the new itunes.
    Everything is great except I can add anything to itunes except music. I've used handbreak to make movies compatible (mpeg4), I've downloaded the sample movie from the apple website but everytime I drag the movies into the library nothing happens.
    I've gone to file and added them to the library but there's just nothing, nothing moves, nothing is added. Music is fine but itunes won't let me add anything but music. What am I doing wrong?
    I'm still new and was so excited about my first mac & ipod. Please help if you can, I'm getting really disheartened.
    Thanks so much
    Mel

    PS... I don't know if this will also help but when I go into my itunes preferences there is no video preference like I've seen on sample sites. Is this a problem? How do I get a video section in my preferences.
    Thanks

  • IMac won't boot after OSX  Intel update crash - Newbie needs help please!

    Hi,
    at the weekend I updated OSX on my IMac 17 with an Intel update. An error message said that the update could not be installed and that the update was sent to the trash - a restart was requested. Since that shutdown my Mac chimes and gets stuck at the white load screen (hard drive is quiet).
    I've tried the following:
    Holding Shift key upon boot to initiate Safe Mode - No Joy!
    Apple+S to run disk utlity/console - cannot initiate to cmd prompt!
    Just as a little background - I'm a recent Apple convert and typical Windows defector. I've seen the light after many years in M**soft environments (I even trained to MCSE) but my Mac OS knowledge is considerably lacking. Let's be honest - so far I haven't had any problems.
    Any gentle help would be most appreciated folks - I'm not sure where to start and I want my baby back!
    Many thanks.

    Same here. I have an iMac 20". It has been upgraded to Leopard and running fine since I purchased it 2 weeks ago. I downloaded the latest OS/X update (100+MB in size) but the installation failed. The system requested a reboot but it has not been able to ever since. It simply keeps beeping with a white screen. I put the Leopard DVD in, held the "C" key, but nothing works. Now I have a system that won't work. From now on, I will shy away from getting the latest update .... I am planning to take it to the apple store

  • Begginer needs help please lads and ladettes

    Hi there two things really..... I have a small video booth company in ireland and use prem ele 7 to edit clips for final dvd, normally 120 clips ranging from 15 secs - 45 secs Do i have to drop and drag transitions one at a time or can I drop bulk transitions in for all clips???????
    Also I am editing a scotish/irish weddding at the moment and yup someone lifts there kilt and reveals his manhood aI want to keep clip but wandering if its possible to blur or cover it up????????
    Would really appreciate your thoughts
    Many thanks

    No and yes, Brandon.
    In version 8, Adobe added the ability to add transitions to several clips at once. In version 7, you still have to drop them onto clips one at a time.
    The best way to blur a face (or whatever) is to use the Track Matte. I cover it in my new book, "Cool Tricks & Hot Tips for Adobe Premiere Elements." In fact, the sample chapter I posted to this page includes the how-to for using the Track Matte! If you like it, please think about picking up a copy of the whole book!
    http://Muvipix.com/CoolTricks
    You can also learn a lot about the program with my free Basic Training for Premiere Elements tutorials, also available on Premiere Elements support site http://Muvipix.com (along with hundred of other tips, tutorials, custom-created DVD menus, motion backgrounds and royalty-free music and stock footage clips). We also publish a number of books that are available on Amazon.com and at the Muvipix store.

  • Newbie need help please

    hi. i cannot seem to do anything on itunes u site manager. in itunes store i am logged in. cannot even upload a banner image. when i go to the web log in page on safari, it says ''incorrect login'' but i know it is correct, as it works fine in itunes store. is public manager web based? or in itunes u store in itunes? i am getting all the editing options in itunes u store and it says i am logged in but when i click ''edit page'' and even try to upload a banner it takes me to safari and says ''content not available'' or ''you are not logged in" ???
    is it me and i am doing something wrong or is itunes u site manager all messed up in itunes 11 ???
    thanks for any help/advice

    Thanks for the response! Just a few questions to clarify...
    Is this a new site?  Have you received your activation confirmation from the iTunes U Team varifying your Apple ID and password as the Administrator? 
    When we originally launched our site in 2008, all editing was done through the iTunes Application.  When it bacame available a couple of years ago, we migrated all of our content to the new Public Site Manager environment...and now all editing and uploading is done through Safari.  Am I correct in understanding that when you go to the Public Site Manager log in, you can't access the your site using you Apple ID and password? 
    Syd Rodocker
    Apple iTunes U Administrator
    Tennessee's Electronic Learning Center

  • Imac newbie needs help please...

    Hi - first, I know 'nothing' about macs, but I know PC stuff pretty well. I'm asking this question for a friend who knows 'nothing' about computers at all. Here goes...
    My friend inherited an imac. I haven't seen it, but someone told him it is an "original" Imac with OS7. He "thinks" it has a USB port, and it must have a dialup modem since the previous owner went online with it. I don't think it has an ethernet port (would a model this old come with ethernet?)
    My friend lives in an area with free WiFi service.
    His question is... can his Imac use this free service - and, if so, how can he do it? He asked a guy at a mac store and was told that he would need OS9 to use the free wifi. Is that true? Isn't there a way he could buy an external wireless modem and somehow get the wifi signal?
    Sorry I don't know more about his mac - hopefully if you need more info I can get it from him - just lemme know what you need to know, and how he can find it.
    Thanks,
    Donk
    Imac   Mac OS 8.6 or Earlier  

    Hello and Welcome to Apple Discussions. 
    All iMacs have at least 10/100BaseT Ethernet.
    All iMacs have at least 2 USB(1.1) ports.
    The earliest iMac shipped with OS 8.6.
    The earliest iMac that had WiFi was the 400MHz model in around 1999. This model too shipped with a version of 8.6 although most iMac 400MHz shipped with OS 9. WiFi is certainly available in OS 9 but I'm unsure about OS 8.
    All iMac CRT/G3 specs can be found here. This should give you a better idea what you're dealing with.
    Your friend would also need either a USB/WiFi adaptor (this will be a pita as drivers that old will be difficult to find) or preferably a Ethernet/Wifi adaptor (aka Wireless Bridge); nil drivers required.
    You don't need a modem to access a WiFi network.
    WiFi on a Mac is called Airport.<p<p>So...
    Get a copy of OS 9 here ($33 and then use the free updates here.
    and a Wireless Bridge from any computer store.
    These are old old computers now and getting them to play with modern kit can be a challenge. However their is a wealth of experience on these discussions so feel free to ask questions.
    HTH
    mrtotes

  • How can I add a new Template to My Templates in Pages? I've read most of the discussions on the subject but it doesn't work for me. By the time I reach the Templates folder, I only see templates for Numbers and not for Pages. Need help, please.  Thanks

    How can I add a new Template to My Templates in Pages? I've read most of the discussions on the subject but it doesn't work for me. By the time I reach the Templates folder, I only see templates for Numbers and not for Pages. Need help, please.  Thanks

    Si vous avez utilisé la commande Save As Template depuis Pages, il y a forcément un dossier
    iWork > Pages
    contenant Templates > My Templates
    comme il y a un dossier
    iWork > Numbers
    contenant Templates > My Templates
    Depuis le Finder, tapez cmd + f
    puis configurez la recherche comme sur cette recopie d'écran.
    puis lancez la recherche.
    Ainsi, vous allez trouver vos modèles personnalisés dans leur dossier.
    Chez moi, il y en a une kyrielle en dehors des dossiers standards parce que je renomme wxcvb.template quasiment tous mes documents Pages et wxcvb.nmbtemplate à peu près tous mes documents Numbers.
    Ainsi, quand je travaille sur un document, je ne suis pas ralenti par Autosave.
    Désolé mais je ne répondrai plus avant demain.
    Pour moi il est temps de dormir.
    Yvan KOENIG (VALLAURIS, France)  mercredi 23 janvier 2011 22:39:28
    iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
    My iDisk is : <http://public.me.com/koenigyvan>
    Please : Search for questions similar to your own before submitting them to the community

  • HT1222 I am trying like **** to download itunes 10.6.3 (64 bit - Windows 7) and I keep getting "the installer was interrupted before the requested operations for iTunes could be completed.  Your systems has not been modified."  I NEED HELP, PLEASE!

    I am trying like **** to download itunes 10.6.3 (64 bit - Windows 7) and I keep getting "the installer was interrupted before the requested operations for iTunes could be completed.  Your systems has not been modified."  I NEED HELP, PLEASE!

    I got it figured out myself... yaaaaay for me!

  • After my iphone4S update to 7.0.6, it have a problem that keep searching network then no service show on display. Can't call. I have try check sim card, reset network settings, and restore my iphone. Still not working at all. Need help please.

    After my iphone4S update to 7.0.6, it have a problem that keep searching network then no service show on display. Can't call. I have try check sim card, reset network settings, and restore my iphone. Still not working at all. Need help please.Urgent.TQ

    Izit software or hardware? Confuse:(
    Only can use wifi now.
    Any way thanks guys for ur suggestion:) amishcake and simes

  • Bought a new macbook and want to manually manage music onto my iphone 4s but when i click 'manually manage' and then 'apply' i get the message saying it will erase everything already on there. Need help please!

    Bought a new macbook and want to manually manage music onto my iphone 4s (as it is already full of music from old windows laptop) but when i click 'manually manage' and then 'apply' i get the message saying it will erase everything already on there. Need help please!

    Before you sync your iPhone make sure that all the music that was synced to your phonereviously has been copied to your iTunes on the new MacBook Pro. Then when you connect your phone you will be able to either sync all music or select only those playlists that you want on the phone.

  • HT4314 Hi i need help please i been playing clash of clans over 13 months. And today o realise what someone using my game Centra. Someone playing on my game Clash of Clans. I been change my Apple ID password, email, but doesn't work. Then I playing game I

    Hi i need help please i been playing clash of clans over 13 months. And today o realise what someone using my game Centra. Someone playing on my game Clash of Clans. I been change my Apple ID password, email, but doesn't work. Then I playing game I can see what someone else trying connecting to my game And I don't know what to do.So if you can help me please? I don't wanna lose my game.

    Contact iTunes
    Contact iTunes

  • Hi i need help please i been playing clash of clans over 13 months. And today o realise what someone using my game Centra. Someone playing on my game Clash of Clans. I been change my Apple ID password, email, but doesn't work. Then I playing game I can se

    Hi i need help please i been playing clash of clans over 13 months. And today o realise what someone using my game Centra. Someone playing on my game Clash of Clans. I been change my Apple ID password, email, but doesn't work. When I playing game I can see what someone else trying connecting to my game And I don't know what to do.So if you can help me please? I don't wanna lose my game. 

    Hello Vaidas Vaidas,
    It sounds like you are noticing someone else is accessing your Clash of Clans data by playing the game and you have tried to reset your Apple ID password. If you are following the steps outlined in this article:
    Apple ID: Changing your password
    http://support.apple.com/kb/ht5624
    What is preventing you from changing your password? Any error messages or prompts?
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • I dont know how i got my photos to my ipod touch from my pc and now i wanna delete them but couldn't. so need help. please let me know.

    i dont know how i got my photos to my ipod touch from my pc and now i wanna delete them but couldn't. so need help. please let me know.

    To turn off auto sync - launch iTunes and go to Edit>Preferences>Devices - check the box at the bottom that says - Prevent iPod, iPhones and iPads from syncing automatically. Click OK and then quit iTunes.
    Connect your iDevice to your PC.
    Launch iTunes,
    Click on the device name on the left side of the iTunes Window.
    Click on the Photos Tab in the iTunes window on the right.
    Untick all of the photos or albums that you want to remove.
    Click on Apply in the lower right corner of iTunes
    If you untick or uncheck the Sync Photos heading and then click Apply it will remove all of the photos from the device when it syncs. In this screenshot - I have only certain albums and events selected to sync.

Maybe you are looking for

  • Must I forever have a CC subscription to open a CC PrPro project in the future?  My CS6 will not do?

    Maybe there's something Adobe have said about accessing my own project files that I may have missed?   At present I can open a CS6 PP project in CS5 but without access to new CS6 features I may have used like the Warp Stabiliser etc.  That's the sort

  • Oracle 11g AMM (Automatic Memory Management)

    Hi All, I have a very powerful server 24 Processors with 6 cores each and 74 GB RAM for my production database. The server will host only one production database. I wanted to use AMM for this database and allocate maximum memory to Oracle by setting

  • Mass updation of Priority field in the process order header screen

    Hi Friends, Can any body knows on how to do mass update the Priority field in the process orders after release.(with out upload using BDC). or can we update the priority field in process order during mass release of process orders using  T- code: COH

  • Feature request: catalog:getKeywordByLocalIdentifier( id )

    Hi, working with LrKeyword is really terrible slow. To search for a specific keyword by its name is only possible by "walking" recursively through all keywords, which takes in my case 5 min (catalog with 150.000 images and approx. 6000 keywords). So

  • Help, JPEGs automatically opening in Raw.

    Since I updated Photoshop PS4 (which I think included Camera Raw 5) all my photos are opening up in Camera Raw.  In the File Open dialog box there is a selection box at the bottom and I select JPEG but when I select a file(s) to open it changes back