Newbie needs help updating site

I have been asked to update a site as previous guy has left
under a cloud so cannot get help from him. Site is
http://www.adrianasjanbijman.co.uk/portfolio.html
& it has a flash photogallery. How do I add photos? when I open
file in flash it just gives the gallery. In Dreamweaver it gives a
gallery file & in there it has a gallery_setup.txt file. Can I
add the photos to gallery and to the text file. Never worked in
Flash before so starting from scratch

beatrix:
Welcome to Apple Discussions, and to the world of Mac computing.
The move from Jaguar to Panther to Tiger is an upgrade, which involves purchasing new software disks. You can download updates once you have the basic software installed, but the initial installation is from disks you have to purchase. See Software update, upgrade--what's the difference?.
To install Tiger your computer will need to meet the minimum system requirements for Tiger and you will need to purchase the Full Retail Version of Tiger. Please note that Computer specific or upgrade versions should be avoided since they are optimized for the computer to which they are specific and will therefore, very likely, cause problems during or after installation. On the legal side, it may be a violation of the Software License Agreement which states
This License allows you to install and use one copy of the Apple Software on a single computer at a time. This License does not allow the Apple Software to exist on more than one computer at a time...
. Tiger is no longer available at the Apple Store but is still available for $129 by calling Apple Phone Sales 1-800-692-7753. You can also find the Full Retail Version of Tiger, if you shop carefully, at online outlets like FastMac, HardcoreMac, AllMac, etc although their prices are not as attractive as Apple's. If you know what you are looking for, read all documentation carefully and ask questions of the seller, you may be able to get Tiger on eBay
Please do post back with further questions or comments.
cornelius

Similar Messages

HT1267 i need help updating without wifi hook up. I was told I could do through my "itunes"

I need help updating without wifi hook up. I was told I could do it through my "itunes"

after selecting restore from backup, you should see a screen asking you wich backup (on the computer)

HT1338 need help updating to snow leopard

need help updating to snow leopard

Hi Billy,
First you need to research all the problems people are having with the higher OSX versions, & make sure you have a bootable clone of what you have just in case.
then you must get 10.6 if they still have it, install it & update to 10.6.8 so you have the App Store to buy & download the huge 10.8 Installer.
Snow Leopard/10.6.x Requirements...
General requirements
   * Mac computer with an Intel processor
    * 1GB of memory (I say 4GB at least, more if you can afford it)
    * 5GB of available disk space (I say 30GB at least)
    * DVD drive for installation
    * Some features require a compatible Internet service provider; fees may apply.
    * Some features require Apple’s MobileMe service; fees and terms apply.
Which apps work with Mac OS X 10.6?...
http://snowleopard.wikidot.com/
It's been pulled from the online store & Apple Stores, so you have to call Apple to buy it, last I heard.
Call Apple Sales...in the US: 1-800-MY-APPLE. Or Support... 1-800-275-2273
Other countries...
http://support.apple.com/kb/HE57

MacBook - Newbie: Need help on printing wirelessly to XP shared printer

MacBook - Newbie: Need help on printing to XP shared printer
Bear with me please. I read tons of articles on this but somehow as a newbie to MAC (girlfriends sick daughter), I am missing something. 10.5.2
Currently, she can print directly if we plug in the HP Deskjet printer directly via USB to the MACBook. No problem.
When we first got the MACBOOK I tried setting up the MACBOOK wirelessly to recognize the workgroup where the printer was attached via USB to the Windows XP PC. However it printed out garbage since I did not know there was a difference between XP printing and MAC (Gutenberg/gimp printing/drivers).
Now I know there is a difference.
But in reading various instructions, I no longer can find how to connect the MAC to the Windows workgroup. Note we do have a printer set up currently as USB-HP Deskjet on the Macbook (not sure I need to delete it yet).
I went to System Preferences on MACBOOK and clicked on printers, more printers. In the drop down box was CANON, APPLETALK, IP HP printing and Firewire. There was no WINDOWS selection as I saw in other online web instructions.
So not sure how to proceed to find a way to:
1. Connect to Windows workgroup (click on what exactly), step by step please!!
2. Add correct HP Deskjet 5490 printer (perhaps there is one with Gutenberg or perhaps I need Gutenprint-really not sure what I am talking about)
Thanks so much in advance. Fiancé's kid has had her cancer recur in a different place and someone was nice enough to buy her a MACBOOK as a gift.
Sincerely
Peter

ccarbery wrote:
OK...I figured it out...no need to reply. I noticed that there was another Protocol to use to set up the printer on the Mac, I was using LPD, so I switched it to HP Jet Direct-socket, and it prints fine...thanks. I am curious as to why LPD wouldn't work; if anyone has that answer I would like to know...thanks
Any chance of posting the Protocol you used to connect to your printer with your laptop? I'm have the exact same problem printing from my MB. Same error message "..is busy".

HT4623 I need help updated my iphone, please help

My need help updating my iphone, I went through the steps to update and now it shows connect to itunes, what do I need to do next.?

Rajan Gupta wrote:
...it is continuously showing an error.
See here > http://support.apple.com/kb/TS3424
Also see this discussion.
https://discussions.apple.com/message/21189708

I have Iconia Tab A500, running 3.0, need help updating using microsd card, got Acer update download

I have Iconia Tab A500 running 3.0, need help updating, I downloaded all updaes list in the acer supprt, all versions, 3.0, 3.1, 3.2, and 4.something, I read on the acer support somewhere I can use a microsd card to update my device, because acer no longer provides automatically, when i try it says "poor network connection, move to anthoer location.", Do I need to update all the listed updates, or can i only update, using the 4. 0? to get the last known update. I also downloaded, "Documents, Apllications, Drivers, Patches, and O.S..... How do i intsall all these updates, I think am running the very lowest version available, Please Help me... Thank you in advance.

the update listed on the acer website, that mentions the a500 update is 'kernal source code (for Android 4.0 Ice Cream Sandwich) it's 96.7MB's released 2012/05/08' is that the right one i need? There is also a list of 3 O.S updates, released in 2014/09/05, 391.5MB's, 394.3MB's, and 391.5MB's large, what are those updates, I clicked the model and followed the directions that the acer website asks, and i ended with a list of update released in 2014/09/05, and a Document update released in 2014/12/17, 112.7KB's large, list of updates reased in 2014/.... and in the Android 4.0 culumn, there is an update that says O.S update released in 2014/09/05, 434.2MB's large, and a Patch Update, that was released in 2013/03/21, what are these updates? listedin the aver website... http://www.acer.ca/ac/en/CA/content/drivers

Newbie needs help trying to update iMac from OS X v10.6.8

Newbie trying to update iMac as far as it will go without having to purchase a new one yet. Can I update from OS X v10.6.8 to OS X 10.7 with the following specs: Intel Core 2 Duo; Processor Speed 2.66 GHz; Processors: 1; Cores: 2; L2 Cache: 6 MB; Memory: 2 GB; Macintosh HD: 63 items with 228.18 GB available?

Upgrading to Lion
If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.
Upgrading to Yosemite
You can upgrade to Yosemite from Lion or directly from Snow Leopard. Yosemite can be downloaded from the Mac App Store for FREE.
Upgrading to Yosemite
To upgrade to Yosemite you must have Snow Leopard 10.6.8 or Lion installed. Download Yosemite from the App Store. Sign in using your Apple ID. Yosemite is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
    OS X Mavericks/Yosemite - System Requirements
    Macs that can be upgraded to OS X Yosemite
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.

I need help updating the graphic drivers for my laptop.

Recently purchasd a new game and I am having some issues with the graphics. Every post I have read suggests it is an issue between HP and amd. I keep trying and seem to be going backwards. I would love to actually talk to someone from hp but they haven their number very well. I have tried every combination between hp and amd and I am obviously missing something. I dont have much hair left to pull out.

Hi there , Thank you for visiting the HP Support Forums and Welcome! This is a great site to get answers and ask questions. I read your post on the HP Support Forums and you had mentioned that you are looking for help Updating the Graphics Drivers on your HP Pavilion dv7t-6c00 CTO Notebook PC. I have the actual drivers page for your specific HP Pavilion dv7t-6c00 CTO. It has the AMD Graphic Driver on this page. You could also update the drivers a couple other ways. 1. Using the HP Support Assistant2. Going into the Device Manager, Right click on the AMD Graphic and doing an update. You had also mentioned that you wanted to actually talk to someone from HP. Please use the following link to create yourself a case number, then call and it may help speed up the call process:
Step 1. Open link: www.hp.com/contacthp/Step 2. Enter Product number or select to auto detect
Step 3. Scroll down to "Still need help? Complete the form to select your contact options"
Step 4. Scroll down and click on: HP contact options - click on Get phone number
Case number and phone number appear.
They will be happy to assist you immediately. Let me know how everything goes. Have a great day!

Need help updating OS 10.2.1

I need to update my system software to 10.2.8. I have dial-up which is extremely slow, so I thought I'd update in parts rather than using the combo update. I had no trouble getting from 10.2.0 to 10.2.1. I've downloaded the 10.2.2 update three times. It seems to be working fine until I open the update icon. It says "The operation could not be completed. An unexpected error occurred (error code 1000)". I can't find anywhere what kind of error this is. I have an old imac. I didn't think that would matter since I'm already in 10.2.1. Any help would be greatly appreciated.

Hi JEL,
first of all: WELCOME TO THE DISCUSSIONS!
The 10.2.8 Combo Update is 97 MB, the sum of all interim updates is more than 136 MB. Furthermore I saw, that the 10.2.5 Update is not online anymore. Use a download utility such as SpeedDownload or iGetter to download the 10.2.8 Combo update. With these you can interrupt, pause and resume any download.
Also, do not forget to Repair permissions before and after an update!

I Need help updating itunes to 11

I Can't update itunes because i can't. Could you guys please help me with that? Thanks
Need to update on my windows 7 xp. Thanks

See the further information area of Troubleshooting issues with iTunes for Windows updates and the tips on downloading the current version either with a different browser or using the direct links.
tt2

Need help updating an old driv

I need to update my sound driver for a Dell desktop that's a couple years old. When I tried to check into the correct download I was directed to a page that said there weren't any updates for my driver. I know this is not correct.
I currently have SB Li've 5. version 5.2..24, and the date on it is 8/30/2002. Creative Labs suggested I should have 5.2..203 and if I didn't that I should follow the support link SBL5DL_DRVPack_LBSBL5DL_PCPatch_LB.exe.
and then click "Download Now" button.
When I did that is when I got the "no update" message rather than the correct download.
I know there must be an update. Could anyone tell me which one I need and where exactly I can find it's Your help would be greatly appreciated.
Thanks,
-Jim

The first step in Upgrading... is to Snow Leopard = OS X 10.6.x
It is Not available as a download... It is a Paid Upgrade.
Do this first...
Check that your Mac meets the System Requirements for Snow Leopard...
Snow Leopard Tech Specs
http://support.apple.com/kb/SP575
If so... Purchase a Snow Leopard Install Disc...
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Other countries...
http://support.apple.com/kb/HE57
After the Successful Install, run Software Update to get the latest updates for Snow Leopard and iTunes.
Next... MAVERICKS...
Check here to see if your Mac is compatible...
http://www.apple.com/osx/how-to-upgrade/

I need help updating LR4 so I can import Nikon Df images. When I try to update, a message says, no new updates. How do I get new updates for LR4?

I need to update LR4 so I can import Nikon Df images. When I try to update a message says there are no new updates. Please help?

Adobe - Lightroom : For Macintosh
Adobe - Lightroom : For Windows
The latest update for LR 4 is version 4.4.1, you can download the appropriate install package from the links above.
Unfortunately support for the Nikon Df was only included with LR 5.3, so the options are.
1. Upgrade to LR 5.
2. Utilize the free Adobe DNG Converter (the latest version is 8.8) to convert the nef files to DNG format and import the dng files into Lightroon 4. Good idea to retain your original raw files and do appropriate investigation into the uses of the DNG format.

HI..need help update WRT54GC Compact Wireless -G

Hi guys,need help about update my WRT54GC..i bought it for about a year ago..but i decide to update it cuz been having some lag in game..and some player told me to update my router. btw i use wired not wireless
My current firmware version is 1.00.7 but i what is the lastest version that i can update too..
and i found some version but is in .jpg format .. don't know why is that so >.<
hope someone can guide me in this =P

You do not have to remove any thing from the firmware file.
Follow this link to upgrade the firmware.

Need help updating Camera Raw for d600.

I have PSE 11 and have turned off my firewalls and still cannot get a Camera Raw update newer than 7.1. I have a d600 and it wont work through that. I know it can be done since I wasnt having this problem before I had to restore my computer and reload my software. I have searched Adobe up and down and everything says to us Help>updates...but its not giving me the option to update. Can anyone help...or send me the file.
Thanks, Katy

Officially, you are not suppose to update your PSE11 and that is why Adobe is not allowing you to update the product by going to Help >> Updates.
However, this does not mean you can't. You can always update your product manually provided you have the basic knowledge of Windows file folders and how to rename, browse and delete old files. Having said this, to update your PSE11 to the latest version of Camera Raw 8.3.0.141, you can do this:
1) Download the update file from this link:
<http://swupdl.adobe.com/updates/oobe/aam20/win/PhotoshopCameraRaw8-8.0/8.3.52/setup.zip>
2) Unzip the downloaded file to your desktop
3) Browse the unzipped folder and double-click on the file called: "AdobePatchInstaller.exe". You might get a prompt to close PSE11 if it is open, so close it and press "Continue" button.
4) Wait for about a minute until PSE11 is updated.
5) now launch PSE11 and from Photo Editor, go to Help >> About Plug In >> Camera Raw
6) you should see something like in this picture:
Good luck but post back if your system did not update automatically. Windows XP, and Windows Vista does not update automatically using this method so there is another method you need to try. Post back anyway to let us know.

Newbie needs help with browser compatibility

Ok, so I'm new at this, so this may be something really
simple, but browser compatibility? I made a site in DW;html and it
shows up perfect in safari but internet explorer and firefox not so
much. I did a browser compatibility test in DW and it says nothing
is wrong with my pages, but obviously something must be!!
On my home page, the image of a house that I have next to the
company name shows up fine in safari but not any other browsers.
And my page layout, everything is moved over funny in other
browsers. Also there are link boxes around the table I created with
different brands of products. On safari the boxes do not show, but
all the other browsers it does!! I'm new at this and frustrated!!!
Need help!!
The link is holmeshifi.com and I posted code from the home
page!

OK thanks Ned sorry to soo dumb I'm on a learning curve here! what
I'm trying to do is go to the URLs of web galleries of images from my
main site
so I would presumably have to rename them on my server? i.e. does that
mean adding the code ", "_blank");
to the files on the server?
At the moment I have to use the back button on my browser window which
takes me back to the main site which then has to reload (tediously!)

Newbie needs help updating site

Similar Messages

Maybe you are looking for