Newbie Needs Template Help
Ok I am a complete newbie to flash. I have read most of the guides provided and searched the forums but I honestly can't find an answer to my question.
I have decided to use one of the templates provided with my flash pro cs5. It is the advanced album.
My question: how do I use it?
I know it gives me generalized instructions when it opens but for the life of me I cannot figure out where or how to put my photos in.
I am using the template because when I try to make an album from scratch I also cant seem to get it to work right (the images just fly through on the preview)
thanks in advance for the help!
Hello wiccanluvr1988,
To make photos show up in the 'Advanced Photo Template' you have to do the following steps...
1.Store your project .fla file inside a folder.
2.Put all your photos inside that folder that you want in the Photo Template.
3.Now you have to go inside the actions frame of the template and change line 11 with this code below by adding your own photo directory.
Line 11:
var hardcodedXML:String="<photos><image title='Your Photo'>images/yourphoto.png</image><image title='Your Photo 2'>folder/yourphoto2.png</image></photos>";
Simple Explained Form:
var hardcodedXML:String="<photos><image title='Image title here...'>Put image directory here</image>
/*Repeat this line of code with new photo directories to display more photos*/ <image title='Image title for 2nd photo...'>Image directory here for 2nd photo</image>
</photos>";
I hope this helped...
Similar Messages
-
I have 4800 jpg files in my librarie, and i want to put each
in a keyframe on scene; the idea is to make a simple movie.
Importing a .mov movie, the quality decrease, and i just notice,
with the jpg file the swf movie has a better quality.
There´s some code to to this fast and easy?
Please help me.
sayeg5. ( very newbie flash user). By the way, i´m using
flash cs3. Trying to learn.Quote from: barkingdogg on 10-February-07, 05:57:05
sorry if i had to ask again. but when you mean during install does that mean during installation of windows?
thank you very much for your quick response.
yes, in a begging of XP installation press "F6".
hit "F6" here few times.
then at next screen put diskette which contain RAID drivers into floppy and load them with pressing "S" key.
load 1st one, and config. them hit "S" key again and load second one as well. you need to load it both: -
It is the little things in life I was always told and all I
am trying to do is to pretty much duplicate the form validation
demo. However I am not even sure where to begin. I have created
many forms and have had them submit and returned in an emial
successfully but I am not quite sure how the Spry widgets work or
how to apply them to an existing form or even a new one for that
matter.
Does the page have to be dynamic in order to use the Spry
validation widget? Hopefully iy can be used on a static page. Are
there any tutorials out there for creating a form in DW CS3 using
the Spry validation widget?
Thanks,
HoustonHi,
First of all, the Spry widgets works on static pages, so you
don't necessary need to have a dynamic page.
It is not to hard to make the demo from site, and I'll
explain you the basic steps you should do to have these widgets
working on your page. The css part, you can customize as you wish,
the demo from site is just a customization.
As I saw, you use Dreamweaver for creating this demo, so I'll
give you the explanations for how to do it on DW.
In a html page, add a form. Inside form add: a Spry Textfiled
validation input (from the Spry tag), a Spry Select input and a
Spry Textarea input.
If you go in design view and select an widget, a blue border
will appear and on the Property Inspector will appear all the
properties you need to customize.
To see exactly what does every property, please check the
Dreamweaver help.
This is the start to create you own form containing Spry
widgets.
Hope this help,
Diana -
Another Newbie Needs Your Help!
I'm going to try to make this quick, but there is an
important backstory to my problem.
I grew up living in Fullerton, California, until about 10
months ago. I still call Fullerton my home and take pride in it.
About 4 years ago, I started playing guitar; about 2 years
ago, I started lusting over a Fender Stratocaster. Fender Musical
Instruments was started by Leo Fender, a radio repairman who
created the first mass-produced electric guitar in his workshop in
Fullerton (coincidentally I went to the same high school he did as
well).
Health problems made him sell Fender to CBS; when he got
better, he got with some friends and started the Music Man company.
A falling-out with said friends resulted in him dissolving ties
with the company. But then he got together with his long-time
friend and descendent of the founders of his hometown, George
Fullerton, and started G&L (George & Leo) Guitars. G&L
still builds guitars in Fender's own factory, the original factory
of Fender guitars, in Fullerton, even though Leo passed away in
1991.
A couple months ago I heard about G&L and, looking at the
website, I realized that these were the exact guitars I'd been
looking for--sooo much more than a normal Fender guitar (CBS has
since taken Fender in different directions than Leo would have,
even moving production to Corona, California) and still made in my
hometown. The website, unfortunately, lacked pictures of the exact
color and model of guitar I wanted, a similar problem I experienced
on Fender's website. Having built upon my 12 years of experience
and know-how with photoshop, I had taken a high-resolution photo of
a Fender Stratocaster and had made custom shapes out of every piece
of the guitar so that I could customize and colorize the thing to
my heart's desire. But the shapes changed to G&L shapes once I
heard of G&L.
Well, after a little tinkering, I had my dream guitar, and
posted pictures in the forum of G&L. Two days later the CEO of
G&L contacted me with the offer of swapping a guitar for some
webwork. I'm ecstatic! A $2000 guitar just for something I do as a
hobby? Plus *******' resume material...
Anyway, the Photoshop work is easy; but I don't want static
pictures of my artwork on any website. Optimally, I wanted to
figure out how to build a guitar customizer using Flash, and Mr.
CEO is more than happy to follow my train of thought. Problem is,
I've taken one college-level beginning Flash class but still feel I
know nothing aside from being able to animate something, which I do
using a USB pen-and-tablet to make mini-cartoons.
So I've been google-searching macromedia flash tutorials
looking for someone that can help me build a customizer.
I know of a couple examples:
DUBMODDER: VW Customizer
MINIUSA: Build your own MINI Cooper
Now I'm not afraid to work hard, and I have a great sense of
an artistic, streamlined, and web-friendly style, as I've done web
work with photoshop before. I also catch on with any computer
program very quick; I took an 8-week college class in 3DS Max and
completed it with the highest grade in the class and left my
instructor with no doubt that I was one of the very few who didn't
need to take the course over to pick up anything better.
These are the two examples I have on Photobucket of my
guitars; they're the same model, the only difference is body and
headstock color. These are the two options I'm considering, though
of late I've leaned towards the green:
Translucent
greenburst with matching headstock
Translucent
orange with black headstock
Every individual component of the guitars is its own custom
shape; so styling and coloring is a breeze, plus getting them up on
the screen individually is a breeze as well. I just need to know
how to get it so that through a series of menu bars, radio buttons,
and checkboxes, I can include all the options available to someone
who would be purchasing a guitar and have a realtime, interactive
picture of the guitar displayed either below or to the right of the
options bar.
Oh, and another note: each of my pictures above is scaled to
25% original size but uncompressed. Being vector graphics, everyone
here knows how high they can be scaled without loss of detail.
Thanks in advance, and if I get significant help, mention
will not be forgotten to this forum and the significant
helpers.Welcome,
but if you want help, you really must avoid the thesis-style
posts - not too many here have time to
read a life biography as interesting as it may be - and after
reading most of it I am still not sure
what your question is - there's nothing specific in your post
other than what brought you to this
point in your career/hobby.
I would suggest keeping your question very direct and to the
point and in as few words as possible -
many of us have clients and deadlines and not a lot of time
to devote to answering questions. Take
this as constructive critism only please - i read your post
and still don't know what answer(s) you
are looking for.
(also helps to provide a descriptive subject sso when we scan
the posts we can see the topic
involved and know ahead of time if we can answer them -
subjects that are general and vague like
"Nebie needs help" tend to get skipped over by the majority).
hope this helps.
-c
--> **Adobe Certified Expert**
--> www.mudbubble.com
--> www.keyframer.com
DNC2112 wrote:
> I'm going to try to make this quick, but there is an
important backstory to my
> problem.
> I grew up living in Fullerton, California, until about
10 months ago. I still
> call Fullerton my home and take pride in it.
> About 4 years ago, I started playing guitar; about 2
years ago, I started
> lusting over a Fender Stratocaster. Fender Musical
Instruments was started by
> Leo Fender, a radio repairman who created the first
mass-produced electric
> guitar in his workshop in Fullerton (coincidentally I
went to the same high
> school he did as well).
> Health problems made him sell Fender to CBS; when he got
better, he got with
> some friends and started the Music Man company. A
falling-out with said
> friends resulted in him dissolving ties with the
company. But then he got
> together with his long-time friend and descendent of the
founders of his
> hometown, George Fullerton, and started G&L (George
& Leo) Guitars. G&L still
> builds guitars in Fender's own factory, the original
factory of Fender guitars,
> in Fullerton, even though Leo passed away in 1991.
> A couple months ago I heard about G&L and, looking
at the website, I realized
> that these were the exact guitars I'd been looking
for--sooo much more than a
> normal Fender guitar (CBS has since taken Fender in
different directions than
> Leo would have, even moving production to Corona,
California) and still made in
> my hometown. The website, unfortunately, lacked pictures
of the exact color
> and model of guitar I wanted, a similar problem I
experienced on Fender's
> website. Having built upon my 12 years of experience and
know-how with
> photoshop, I had taken a high-resolution photo of a
Fender Stratocaster and had
> made custom shapes out of every piece of the guitar so
that I could customize
> and colorize the thing to my heart's desire. But the
shapes changed to G&L
> shapes once I heard of G&L.
> Well, after a little tinkering, I had my dream guitar,
and posted pictures in
> the forum of G&L. Two days later the CEO of G&L
contacted me with the offer of
> swapping a guitar for some webwork. I'm ecstatic! A
$2000 guitar just for
> something I do as a hobby? Plus *******' resume
material...
> Anyway, the Photoshop work is easy; but I don't want
static pictures of my
> artwork on any website. Optimally, I wanted to figure
out how to build a
> guitar customizer using Flash, and Mr. CEO is more than
happy to follow my
> train of thought. Problem is, I've taken one
college-level beginning Flash
> class but still feel I know nothing aside from being
able to animate something,
> which I do using a USB pen-and-tablet to make
mini-cartoons.
> So I've been google-searching macromedia flash tutorials
looking for someone
> that can help me build a customizer.
> I know of a couple examples:
>
http://dubmodder.com
>
http://miniusa.com
> Now I'm not afraid to work hard, and I have a great
sense of an artistic,
> streamlined, and web-friendly style, as I've done web
work with photoshop
> before. I also catch on with any computer program very
quick; I took an 8-week
> college class in 3DS Max and completed it with the
highest grade in the class
> and left my instructor with no doubt that I was one of
the very few who didn't
> need to take the course over to pick up anything better.
> These are the two examples I have on Photobucket of my
guitars; they're the
> same model, the only difference is body and headstock
color. These are the two
> options I'm considering, though of late I've leaned
towards the green:
>
http://i61.photobucket.com/albums/h41/dnc2112/InvaderPlusGreenburst.jpg
>
http://i61.photobucket.com/albums/h41/dnc2112/InvaderPlusOrange.jpg
> Every individual component of the guitars is its own
custom shape; so styling
> and coloring is a breeze, plus getting them up on the
screen individually is a
> breeze as well. I just need to know how to get it so
that through a series of
> menu bars, radio buttons, and checkboxes, I can include
all the options
> available to someone who would be purchasing a guitar
and have a realtime,
> interactive picture of the guitar displayed either below
or to the right of the
> options bar.
> Oh, and another note: each of my pictures above is
scaled to 25% original size
> but uncompressed. Being vector graphics, everyone here
knows how high they can
> be scaled without loss of detail.
> Thanks in advance, and if I get significant help,
mention will not be
> forgotten to this forum and the significant helpers.
> -
the JNI tutorial speaks about creating a "shared directory" where a "dll" file is created and stored.
How do i create this ".dll" file and store it into the shared directory ? ...Hi,
Creating dll is outside the realm of Java programming. You need to use some language like C/C++/VB etc. Any good C/C++ IDE has wizards to help you create a dll. Use them. There is a free one at www.bloodshed.org called Dev-C++.
cheers
Projyal -
Hi guys,
I need to create a function that returns as string, the path or location of the file it is in.
for example:
this function will be in a file called A.java
A.java has the path C/MyDocuments/Jenna/java/A.java
so when I run this function, it returns a string "C/MyDocuments/Jenna/java"
I would really appreciate if someone could write code to help me understand how i can do this
thanks
curious girl
xxxYou want the location of the source file (the .java file) from which the current class was compiled? You can't do that. (Unless you explicitly code it as a member variable of that class, which would be silly).
Or do you want the location of the .class file? That can't be done completely cleanly or reliably, but you can sort of get it by searching all the elements of that class' ClassLoader's classpath, which you can't necessarily get for all classloaders.
Whichever one it is, why do you think you need this? -
Hi all,
I recently inherited a flex project someone left for dead...
I am having a little trouble finding some things referenced in
http://livedocs.adobe.com/flash/9.0/ActionScriptLangRefV3/.
When in Flex builder 3, I cannot seem to import any fl.* packages.
How do I get to this package???
Also, I do not see any support for nested Data Grids... I
have a REAL need to be able to nest one grid within another. Is
there any way I can do this in Flex? I found some stuff about the
AdvancedDataGrid component, but, I don't know where to look for
information on its capabilities.
So, any help would be greatly appreciated. Thanks,
StanHi Stan,
Here's the link to the Flex 3 feature introductions on our
Adobe Labs site about Advanced DataGrid:
http://labs.adobe.com/wiki/index.php/Flex_3:Feature_Introductions#Advanced_DataGrid
thanks,
Sharon -
Newbie needs general help w/Java Updating
Hi,
I don't use Java (as far as I know) too often, but right now I've got Java 5_6 update on my computer. I've been told that's unstable and I should update to Java 6. I was also told I should remove 5_6 Update with add/remove programs before doing so. I was also told I should remove the three Java "objects" in the Downloaded Program Files Folder before doing so (which is an IE thing, right?). But I was also told to go and download Java 6 directly from the Sun site and install, but I'm not sure if that's necessary or the way I want to do it, because I have the option to check for updates in the Java Control Panel that comes up when I double click the Java icon in my Control Panel folder.
Questions:
1. The three java objects in the downloaded objects folder are in a folder that's part of IE, is that right? I don't use IE (except for Windows Updates), I use Firefox. So where are the objects kept for Firefox?
2. Do I really need to also remove these objects in addition to add/removing 5_6 Update? If so, for both IE and Firefox?
3. When I go to my Control Panel, there is an icon for JAVA. When I double-click this icon, a JAVA CONTROL PANEL opens up. If I remove 5_6 Update and those objects, will that also remove this control panel? The control panel was part of my system when I got my laptop.
4. If the Java Control Panel is retained, then why can't I just go to the second tab which is for Updates, choose "Update Now" and get the Java 6 update that way? (And this would be AFTER I remove 5_6 -- and any objects, IF that's necessary.)
It's my hope that I can just update to Java 6 (after removing the 5_6 update and objects, if necessary) by using the update feature in the Java Control Panel instead of downloading Java 6 from the Sun site. If this is not a good idea, I would like to understand why.
Any help is appreciated -- thanks!Thanks for the post. So J2SE Runtime Environment 5.0
Update 6 (which is apparently what I have now) is
stable
It's reasonably stable. There are bugs in it, of course. There are always bugs in software. Unless you're having problems with them, however, you don't automatically need to update.
The list of changes between that release of Java 5 and the latest (1.5.11 at the time of writing) is given here:
http://java.sun.com/j2se/1.5.0/ReleaseNotes.html
, and it's false that it has security
holes that can be exploitedThat's a completely different question. I can't promise you that there are no security flaws that have been fixed since that particular update. However, unless you're running a server or downloading applets or otherwise running in a security constrained environment there's not much point in worrying about it. Again, if there is a specific reason for you to worry check the bugs and enhancement lists here to see if your concerns are addressed:
http://java.sun.com/javase/6/webnotes/index.html
Either way you don't update just because someone says you should unless you have reason to believe they know what they're talking about. I suggest you ask your original source to explain why they think you should upgrade and to provide you with the evidence to back up their assertions. -
Newbie needs basic help-HELP!(configuration)
I've got Solaris installed on my amd box which has a Radeon vid card and a d-link nic (DFE-530TX+).
So right now I only have 16-bit VGA which is hard to navigate and I don't have net connection. So on my windows box which has a network connection, I downloaded the patches I need for the vid/nic cards and saved them to floppy.
Could someone walk me through the steps/commands I need to use to mount my floppy and copy the appropriate files etc off of them, unzip, and install?
I'm trying to learn solaris but first just need to enable a decent gui with a net connection. Any help is greatly appreciated. Also, if you think it would be easier for me, on my Solaris/amd box, I'm also dual booting w/ win2k so maybe I could somehow mount the windows partition and avoid dealing w/ the floppy? Thanks in advance!Hi Nick,
once you have the vpn tunnel established, you 'should' be able to browse the other macs on the network as you would at work. This of course is dependent on the other systems annoucing themselves vs. you having to specificy an IP and /or name - but yes, once you have the vpn setup, you should be able to see the other machines with shared folders.
You could as you suggested just open ports on your work firewall that would allow apple file sharing, and then from home, connect the the firewall IP on the internet (using dyn dns if your work ip is not static), and map to the drives. This is less secure that the vpn as, once the ports are open at work, your mac passwords are the only thing protecting your folders and data. I don't use filemaker, but it all you need is folder access to the database then this is a cheaper alternative. Just setup your router to forward requests for port 548 (Apple file sharing) to the mac with the database folder. Just backwards from what your described you did previously. Just make sure you have good security setup on the 'server'. -
I have a txt file that contains the following:
5:2
1:2
3:3
4:3
2:1
5:3
1:2
2:3
3:2
2:1
I need to make a few calculations to the data above. I cannot change the format of the file. I need the sum of each column and I need to compare the integers in each row. When I compare the two ints I just need a true or false depending on whether row1>row2.
I think I can make these calculations by first splitting the data into two rows. I'm trying to read this data from a text file but when I get to the end of the file I get a NumberFormatException. I've looked over my code for hours but can't seem to find my mistake. This is a piece of my code, any advice?
while((line = inScrn.readLine())!=null) {
scores = line.split(":")
for(int index=0; index < scores.length; index++) {
int num = Integer.parseInt(scores[index]);} //This is where I get the error
System.out.println(num); }
I inserted the System.out.println just to see how much of the file my code reads. It reads all the data but errors at the end of the file. I tried adding empty spaces to the end of my file but that didnt make a difference.
The exact error at the bottom of my compiler is:
NumberFormatException:
for input String: "" (in java.lang.NumberFormatException)I have a txt file that contains the following:
5:2
1:2
3:3
4:3
2:1
5:3
1:2
2:3
3:2
2:1
I need to make a few calculations to the data above.
I cannot change the format of the file. I need the
sum of each column and I need to compare the integers
in each row. When I compare the two ints I just need
a true or false depending on whether row1>row2.
I think I can make these calculations by first
splitting the data into two rows. I'm trying to read
this data from a text file but when I get to the end
of the file I get a NumberFormatException. I've
looked over my code for hours but can't seem to find
my mistake. This is a piece of my code, any advice?
while((line = inScrn.readLine())!=null) {
scores = line.split(":")
for(int index=0; index < scores.length; index++) {
int num = Integer.parseInt(scores[index]);}
ex]);} //This is where I get the error
System.out.println(num); }
I inserted the System.out.println just to see how
much of the file my code reads. It reads all the data
but errors at the end of the file. I tried adding
empty spaces to the end of my file but that didnt
make a difference.
The exact error at the bottom of my compiler is:
NumberFormatException:
for input String: "" (in
java.lang.NumberFormatException)Your Error indicates that java tried to convert "" to a Number
which of course gives NumberFormatException
So I'd guess from that, that your program reads in all the data and does what you require.
But Then it reads in an empty line i.e. ""
You'll want to handle this in some way like:
if( ! line.length() == 0 ) //Don't try and Interpret a Blank Line at all
scores = line.split(".");
//.......... and etc
}and also think about something like
int num =0;
try
num = Integer.parseInt(scores[index]);
catch( NumberFormatException e )
System.out.println( "Could Not Parse: " + scores[index] );
}As for the procedure to do what you want, well, I'm sure you'll get that.
Ah Yeh, much as it catches me too:-
null and empty String "" are not the same...... -
Hello everybody, maybe someone will find five minutes to help me...
I've got this class that parses an XML file (here's the source):
package bicocca.util;
import java.io.FileReader;
import org.xml.sax.XMLReader;
import org.xml.sax.InputSource;
import org.xml.sax.helpers.XMLReaderFactory;
import org.xml.sax.helpers.DefaultHandler;
import org.xml.sax.Attributes;
public class Configurator extends DefaultHandler {
public String dbAddress = new String();
public String serverAddress = new String();
public String appHome = new String();
private boolean intoDB = false;
private boolean intoServer = false;
private boolean intoHome = false;
private boolean intoIp = false;
private boolean intoPath = false;
public Configurator() {
super();
public void setUp() throws Exception {
XMLReader xr = XMLReaderFactory.createXMLReader();
Configurator handler = new Configurator();
xr.setContentHandler(handler);
xr.setErrorHandler(handler);
FileReader r = new FileReader("c:\\tomcat4.0.\\webapps\\bicocca\\WEB-INF\\bicocca-conf.xml");
xr.parse(new InputSource(r));
public void startElement (String uri, String name, String qName, Attributes atts) {
System.out.println("startElement(): " + name);
if(name == "dbAddress"){
intoDB = true;
if(name == "serverAddress"){
intoServer=true;
if(name == "appHome"){
intoHome=true;
if(name == "ip"){
intoIp=true;
if(name == "path"){
intoPath=true;
public void endElement (String uri, String name, String qName) {
System.out.println("endElement()" + name);
if(name == "dbAddress"){
intoDB = false;
if(name == "serverAddress"){
intoServer=false;
if(name == "appHome"){
intoHome=false;
if(name == "ip"){
intoIp=false;
if(name == "path"){
intoPath=false;
public void characters (char ch[], int start, int length) {
System.out.println("characters()");
if ((intoDB) && (intoIp)){
for (int i=start; i<start+length; i++){
dbAddress += ch;
System.out.print("DB: " + dbAddress + "\n");
if ((intoServer)&&(intoIp)){
for (int i=start; i<start+length; i++){
serverAddress += ch[i];
System.out.print("Server: " + serverAddress + "\n");
if ((intoHome)&&(intoPath)){
for (int i=start; i<start+length; i++){
appHome += ch[i];
System.out.print("Home: " + appHome + "\n");
public String getDBAddress(){
try {
setUp();
catch(Exception e){
e.getMessage();
System.out.print("===========> DB: " + dbAddress + "\n");
return dbAddress;
public String getServerAddress(){
try {
setUp();
catch(Exception e){
e.getMessage();
return serverAddress;
public String getAppHome(){
try {
setUp();
catch(Exception e){
e.getMessage();
return appHome;
As you see, there are three methods that should return one of this three Strings:
public String dbAddress = new String();
public String serverAddress = new String();
public String appHome = new String();
Instead, when I run the class (istanziated in a jsp), on the Tomcat console I obtain this result:
startElement(): configuration
characters()
characters()
startElement(): dbAddress
characters()
startElement(): ip
characters()
DB: 127.0.0.1
endElement()ip
characters()
startElement(): port
characters()
endElement()port
characters()
endElement()dbAddress
characters()
characters()
startElement(): serverAddress
characters()
startElement(): ip
characters()
Server: 127.0.0.1
endElement()ip
characters()
startElement(): port
characters()
endElement()port
characters()
characters()
endElement()serverAddress
characters()
characters()
startElement(): appHome
characters()
startElement(): path
characters()
Home: c:\tomcat4.0.3\webapps\bicocca
endElement()path
characters()
endElement()appHome
characters()
endElement()configuration
===========> DB:
What I understood is that after parsing the XML file, the class clears all variables... What I'm doing wrong?
N.B. Previewing this message I see that there's something wrong displayng the index of "ch" in the for cicles in the characters() method, I wrote them right, is just a display bug!first Dr. Clap is correct.
What I understood is that after parsing the XML file
the class clears all variables...not at all! you simply don't realize than we you do new Configurator() you instanciate a new class.
the variables are set in this new class, not in the current one!!!
hence, the address is there: handler.dbAddress !!! -
Potential newbie need some help
If I want to buy a later version of Flash ...to save money ....how far back could I go without regretting this decion?
I'm a hobbyist and love to experiment, I can say I will do animating and action scripting about 50 - 50 till I figure what the contraints and limitations are.
Also where (besides E-Bay) can I feel say in making this purchase?
Does anybody know what CS4 may be selling for these days?
Also ...if you are a pro with this software ...is there much difference in the animating environment from CS4 to CS5.5?
Do I want to make sure I get a version with Action script 3.0 because it so much better than 2.0?
I know ...I know ...do the research ...I'm on it ...but any additional help would be appreciated.Papervision is free ...correct?
yes: http://code.google.com/p/papervision3d/
you should also check away3d.
Papervision is like a renderer ...correct?
it's a 3d engine.
Papervision is what they use to produce some of those animations that looks semi-3D ...corect? In otherwords its not plain 2D ...but not really 3D.
no, they look completely 3d. flash cs4 makes semi-3d animations
Don't care about advanced Text ....I think.
Don't think I want to create IOS either.
Just a real quick question ....with flash BUILDER ...even though is taylored to developers ...you can do everything with it that you do with Flash professional ...correct?
no. i don't think you have a stage in flash builder that you can draw on and i don't think you have timeline frames.
Finally .... how many computers does a single licenses allow you to install on?
i've never tried to install on more than 1 so i don't know that.
p.s. please mark helpful/correct answers, if there are any. -
Hi,
I have used Captivate for a while, but have no idea where to
begin to insert JavaScript into Captivate. Everyone talks about it,
but I can't find a very basic beginner explanation for this. I
don't even know WHERE to put the JavaScript.Dear Altruistic
Thanks for the link to the Netbeans quickstart webpage sadly it does not contain any visual cues as to what proceedures are neccessary to implement the instructions.
For someone like me ( learning disability) this can cause difficulties I learn in a slightly different way to those who are able to assimilate written instructions.
The text might as well have been ancient Greek ...
I really need a discriptive walk through lets give an exampleso you will understand my needs ... say I wanted to open a Microsoft word document on the desktop of a windows PC (ok not a good choice but there you are ) here is how I would begin to write the proceedure
1. look at the bottom left hand side of your screen
can you see a windows symbol with start displayed ?
yes ..
Hold your mouse over the start icon and left click .. then use the cascading menu feature to select office 2003 ...
Do you get the general idea about what I need here ....?
So have a look at the link on my original post that points to David Eck's website where he lists some Java source code and if possible give me the proceedure of how to run this from within the Netbeans environment.
Once I can do this I will be able to teach myself ....
I guess in a nutshell what I am saying is why on earth is their not just a simple feature on the GUI that allows you to import some code and for Netbeans to run in Demo mode ! I know their is sample projects included within the application but here again this does not solve my problem of notbeing able to find a way to run source code from the application.
I hope this makes sense ! -
CRVS2010 Beta - Newbie Needs Serious Help!!!!
I'm converting from VS2008 to VS2010 and downloaded/installed the Crystal Beta for VS2010 successfully. I'm able to access the Oracle database and create the report with no problem. The issue I'm having is within the VB language and errors on previously correct code. The following worked with VS2008 and the old Crystal, but is no giving the errors with the bold and underlined code.
Imports CrystalDecisions.CrystalReports.Engine
Imports CrystalDecisionsecisions.Shared
Class JIFJudgeListing
Private Sub JIFJudgeListing_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Dim crLogOnInfo As New TableLogOnInfo()
crLogOnInfo.ConnectionInfo.ServerName = crServer
crLogOnInfo.ConnectionInfo.UserID = crUser
crLogOnInfo.ConnectionInfo.Password = crPwd
Dim JudgeListing As New JIFJudgeList
JudgeListing.Database.Tables.Item(0).ApplyLogOnInfo(crLogOnInfo) <----
CrystalReportViewer1.ReportSource = JudgeListing
CrystalReportViewer1.Visible = True
CrystalReportViewer1.Show()
End Sub
I'm having trouble finding any documentation on the beta version and the conversion from 2008. Any help would be greatly appreciated.
Larry
Edited by: Don Williams on Jul 5, 2010 7:37 AMUpdated subject line to follow the beta rules and click on this link for more info:
Crystal Reports for Visual Studio 2010 Beta - read before posting
DO NOT DISTRIBUTE to a production system. This is beta and distribution files will not be available until it's GA and release as a final product.
Thank you
Don -
Hi -
What I have is some artwork from a customer in a PDF format. I am taking that artwork, converting it to a JPEG, bringing it into my CAD software (solidworks/photoworks) as a decal, and overlaying the artwork onto the finished design. My problem is the imported artwork has a "white background" for lack of a better term, behind the colors. This background essentially hides all the stuff directly behind the decal.
The artwork has the outline of the part it is to be printed on, which I would also like to remove. In illustrator, the artwork and outline of the part come into the software as a single object (I hope that is the correct terminology)
Is there a way to remove the white background and the outline and have just the artwork left (colors) and the export to a JPEG? I'd post the artwork but I'm not sure my customer would approve even though its a released product.
Any help is greatly appreciated. Thanks
JoeYou might be able to bring a pdf into your CAD program and AI also
exports to dwg and dxf.
Can you take a screen shot of the file and post it here by using the
camera icon in the text input form when posting a response here?
The white background may not actually be there but if there is a shape
it can be selected the same as you would in A CAD program
with a selection tool.
The selection tool is a black arrow and the direct selection tool is
the white arrow it is used to select a single path that might be part
of a group of paths
most people use this more often then the black arrow.
You can also go tot he layers panel and expand the layer even if
everything is collected on one layer and click at the right side of
each path to select the path you look at the art on the canvas to see
which
path is selected it will be highlighted showing the path. when you
have the one you want to delete you hit delete or back key on the
keyboard. Then either save the file as a pdf or export as dwg dxf
ortiff or png or jprg or what you think looks best when you bring it
back into your program.
Select part of the art with the direct select tool with the path highlighted blue
The same file with the path deleted
Maybe you are looking for
-
I am looking to change my Apple Id (changing my internet profider), which is my e-mail, How do i do this? or, can i have two computer using the same gmail e-mail as a apple id ? thanks!
-
I can't buy or download anything. It keeps whining that the data is wrong, both on iPhone and iPad. It's the right info but it keeps whining about "payment method declined" or something? I dunno, some say it fixes itself after a few days. But it's be
-
How do keywords work in Bridge CS3
Hello everyone, I have a somewhat strange problem: I try to add keywords to non-Adobe files as to an Powerpoint file or an Openoffice file. Sometimes it works, sometimes I get an error message that Bridge is unable to save XMP-Data ... How does this
-
How can I get ACE demo license in cisco?
Hi everyone, I would like to get ACE demo license.. minimum 50VC and 16G bandwidth to demo on my customer site. But I can't find the demo license in cisco Now I use the cisco ACE demo, I can't open service request to get license , due to demo device,
-
How to move/transfer programs & data from Windows 7 laptop to new laptop with Windows 8.1
Purchased new laptop with Windows 8.1 (not my favorite OS) and need to transfer several programs and data from my old HP Laptop running Windows 7 Ultimate and 1 program from older HP Desktop running Windows Vista Ultimate. How can I do this?