(newbie) Null Time Pointer exception while creating connection Pool
I am trying to create an Oracle connection pool using the admin
console in Weblogic 7.0.
Attached is the text of the error message I get when I attempt to deploy this to
the target server.
I specify the following properties in the configuration tab:
URL = jdbc:oracle:thin:@techdev1:1522:slsd
Driver Classname = oracle.jdbc.driver.OracleDriver
Any help would be great
Thanks
Naveen
[pool_error.txt]
Hi Naveen,
Could you post the full definition of the pool?
Regards,
Slava Imeshev
"Naveen" <[email protected]> wrote in message
news:3d177814$[email protected]..
>
I am trying to create an Oracle connection pool using the admin
console in Weblogic 7.0.
Attached is the text of the error message I get when I attempt to deploythis to
the target server.
I specify the following properties in the configuration tab:
URL = jdbc:oracle:thin:@techdev1:1522:slsd
Driver Classname = oracle.jdbc.driver.OracleDriver
Any help would be great
Thanks
Naveen
Similar Messages
-
Hi,
I am using ant tasks wlserver and wlconfig to configure my weblogic server. while creating a connection pool as shown below
<target name="jdbcinfo">
<wlconfig password="weblogic"
username="weblogic"
url="${url}"
<query domain="mydomain" type="Server"
name="myserver" property="serverbean"
/>
<create type="JDBCConnectionPool"
name="jdbcpoolA"
property="jdbcPoolProp">
<set value="false"
attribute="ShrinkingEnabled"
<set value
attribute="
<set value="${serverbean}"
attribute="Targets"/>
The JDBCConnectionPool is created as long as I don't specified the attribute "Targets"
Once I add the target I get the following error
<JDBC> <BEA-001129> <Received exception while creating connection for pool "poolname" invalid arguments in call>
Please any help will be greatly appreciated.
ThanksIn your applicaion module configurations check if you are using 'JDBC URL' or 'JDBC DataSource'. You should use JDBC DataSource. Then make sure that your deployment descriptor (menu 'Application->Application Properties->Deployment) has the 'Auto Generate ...' checkbox set.
Timo -
Error Message while creating connection pool
Hi all,
I got the following error message while creating connection pool for the
SQL Server thru the Application Server Admin Console.
The message is,
An error has occured.
Operation 'create.Jdbc.ConnectionPool' failed in 'resources' Config Mbean. Target exception message :
JdbcConnectionPool Already Exists: cannot add duplicate.
But the connection pool for the SQL Server was not there in the list.
What may be the possible reason for this error.
i was trying to deploy a BMP entiy bean using the Sun Application Server.
Prior deploying i just tried to create connection pool and test the connection using the Admin Console
Please help me by providing a solution.Kriti Sundar Mazumder wrote:
Hi
I am getting an following error message, while creating database connection pool
in weblogic 7.
"<Jun 18, 2004 4:52:36 AM CDT> <Error> <JDBC> <001060> <Cannot startup connection
pool "MyJDBCConnectionPool" java.sql.SQLException: [IBM][JDBC Driver] CLI0647E
Error allocating DB2 environment handle, rc=-1.>"
Can anyone help me out in this regard
Regards
KritiHi. I am no expert, but it sounds like a problem with the privileges the user
has... The best thing is to step back to a simpler environment. Can you try
connecting to DB2 with a simple program like utils.dbping? Please look at our
driver docs for the DB2 driver, because there are several variations in connect
properties depending on the type of DB2 you are connecting to...
Joe -
Issue while creating connection pool in weblogic using SERVICE NAME
Found two issues while creating connection pool in weblogic using SERVICE NAME
1. While running apps from jdeveloper using xxx-jdbc.xml
weblogic.common.ResourceException: Could not create pool connection. The DBMS driver exception was: Io exception: The Network Adapter could not establish the connection
at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(ConnectionEnvFactory.java:253)
at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1109)
at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1033)
at weblogic.common.resourcepool.ResourcePoolImpl.start(ResourcePoolImpl.java:214)
at weblogic.jdbc.common.internal.ConnectionPool.doStart(ConnectionPool.java:1051)
2. Configuriing the jndi in Weblogic server
weblogic.common.ResourceException: Could not create pool connection. The DBMS driver exception was: Listener refused the connection with the following error:
ORA-12505, TNS:listener does not currently know of SID given in connect descriptor
The Connection descriptor used by the client was:
localhost:1521:SERVICENAME
at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(ConnectionEnvFactory.java:253)
at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1109)
at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1033)
Problem
database url is generated based on SID
eg: jdbc:oracle:thin:@localhost:1521:SID
Solution
(generate seperate url for SERVICE NAME)
jdbc:oracle:thin:@localhost:1521/SERVICENAME
------------------------It is so clear: host not found error for network connection and the other SID servcie name not found means your oracle instance name is not up. check with srvctl status for given servcie name or node, else check CRS_Stat -t if you are using RAC.
-
Error while creating connection pool "FATAL: database "null" does not exist
Hi,
Iam trying to create a XA connection pool using postgres driver (postgresql-8.3-603.jdbc3.jar) on Weblogic 8.1.6.0 from the Admin Console.
I have provided the following info in the JDBC config
Driver Class Name: org.postgresql.xa.PGXADataSource.
JDBC URL: jdbc:postgresql://192.168.192.112:5432/sample1
UserName: postgres
Password: Postgres
When i click Test Driver Configuration. Iam getting the following error
"FATAL: database "null" does not exist"
if i change the Driver Class Name to "org.postgresql.Driver", it is working fine. But as iam trying to create XA datasource i need to use the XA Driver class name.
Can someone tell me how to resolve this issue ?
The postgres version iam using is 8.3.1Hi Joe,
The driver is in the classpath.
Please find the stack trace.
org.postgresql.util.PSQLException: FATAL: database "null" does not exist
at org.postgresql.core.v3.ConnectionFactoryImpl.readStartupMessages(Conn
ectionFactoryImpl.java:444)
at org.postgresql.core.v3.ConnectionFactoryImpl.openConnectionImpl(Conne
ctionFactoryImpl.java:99)
at org.postgresql.core.ConnectionFactory.openConnection(ConnectionFactor
y.java:66)
at org.postgresql.jdbc2.AbstractJdbc2Connection.<init>(AbstractJdbc2Conn
ection.java:124)
at org.postgresql.jdbc3.AbstractJdbc3Connection.<init>(AbstractJdbc3Conn
ection.java:30)
at org.postgresql.jdbc3.Jdbc3Connection.<init>(Jdbc3Connection.java:24)
at org.postgresql.Driver.makeConnection(Driver.java:386)
at org.postgresql.Driver.connect(Driver.java:260)
at java.sql.DriverManager.getConnection(DriverManager.java:512)
at java.sql.DriverManager.getConnection(DriverManager.java:171)
at org.postgresql.ds.common.BaseDataSource.getConnection(BaseDataSource.
java:83)
at org.postgresql.xa.PGXADataSource.getXAConnection(PGXADataSource.java:
47)
at org.postgresql.xa.PGXADataSource.getXAConnection(PGXADataSource.java:
32)
at weblogic.management.console.utils.JDBC.testConnection(JDBC.java:185)
at weblogic.management.console.actions.mbean.JDBCConnectionPoolTestActio
n.prePerform(JDBCConnectionPoolTestAction.java:114)
at weblogic.management.console.actions.mbean.DoMBeanWizardAction.perform
(DoMBeanWizardAction.java:215)
at weblogic.management.console.actions.internal.ActionServlet.doAction(A
ctionServlet.java:182)
at weblogic.management.console.actions.internal.ActionServlet.doPost(Act
ionServlet.java:86)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run
(ServletStubImpl.java:1077)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
pl.java:465)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
pl.java:348)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationActio
n.run(WebAppServletContext.java:7047)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(Authenticate
dSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:
121)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppSe
rvletContext.java:3902)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestIm
pl.java:2773)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:224)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:183) -
'timezone region not found' while updating connection pool
Hi Experts,
We have upgraded our weblogic server from 10.3.3.0(11.1.1.3.0) to 10.3.6.0(11.1.1.6.0)
All the data sources and connection pools were created in the previous version(11.1.1.3.0) and it worked fine.
After the upgrade has done, we tried to run a BPEL web service which is using a database connection to get some data.
Then the below error has thrown out in EM.
*<part name="summary">*
*<summary>Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'Validate_Invoice' failed due to: Could not create/access the TopLink Session. This session is used to connect to the datastore. Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.3.1.v20111018-r10243): org.eclipse.persistence.exceptions.ValidationException Exception Description: Cannot acquire data source [jdbc/EBSAPPS]. Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.EBSAPPS'. Resolved 'jdbc'; remaining name 'EBSAPPS'. You may need to configure the connection settings in the deployment descriptor (i.e. DbAdapter.rar#META-INF/weblogic-ra.xml) and restart the server. This exception is considered not retriable, likely due to a modelling mistake. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. </summary>*
*</part>*
*<part name="detail">*
*<detail> Exception Description: Cannot acquire data source [jdbc/EBSAPPS]. Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.EBSAPPS'. Resolved 'jdbc'; remaining name 'EBSAPPS'</detail>*
*</part>*
Then I tried to recreate the data source and jndi name.
Then I got below error while creating connection pool,
An error occured during activation of changes. Please see the log for details.
Weblogic.Application.ModuleExeption
ORA-00604: Error occurred at recursive sql level 1ORA 1882:timezone region not found.
Database OS level timezone is - SLT
Weblogic server OS level timezone is - IST
As i remember above are the timezones there earlier also....
What can do??
Thanks in advance....Hi Joe,
Thanks for the reply...
But it seems answers are given related to 'Application Express Listener'.
The thing is we got this issue once we upgrade the middleware tier. We cannot do anything on database side. (Remote database)
The solution should be in middleware, Weblogic server side.
Our live environment still in the 10.3.3.0 version. It works fine..
any suggestions ???
Thanks.... -
Oracle 10g JDev IDE 9.0.5.2 Null Pointer Exception while debugging
Hi,
In windows XP m/c, I am facing following Null Pointer
Exception while debugging basic Java application through
10g JDev 9.0.5.2, and it failed in debugging that application...
May I know, How to get it out of this problem..., am
suspecting Is it related to any of my windows XP configuration?
Here's the stack trace shown in the 10g JDev console while
debugging simple java application..,
java.lang.NullPointerException
at javax.swing.border.EmptyBorder.<init>(EmptyBorder.java:54)
at com.sun.java.swing.plaf.windows.WindowsTableHeaderUI$XPDefaultRendere
r.getTableCellRendererComponent(WindowsTableHeaderUI.java:63)
at oracle.jdevimpl.runner.debug.ThreadsPanel$3.getTableCellRendererCompo
nent(ThreadsPanel.java:306)
at javax.swing.plaf.basic.BasicTableHeaderUI.getHeaderRenderer(BasicTabl
eHeaderUI.java:394)
at javax.swing.plaf.basic.BasicTableHeaderUI.getHeaderHeight(BasicTableH
eaderUI.java:428)
at javax.swing.plaf.basic.BasicTableHeaderUI.createHeaderSize(BasicTable
HeaderUI.java:454)
at javax.swing.plaf.basic.BasicTableHeaderUI.getPreferredSize(BasicTable
HeaderUI.java:485)
at javax.swing.JComponent.getPreferredSize(JComponent.java:1275)
at oracle.jdevimpl.runner.debug.ThreadsPanel.threadsPanelSettingsChanged
(ThreadsPanel.java:538)
at oracle.jdevimpl.runner.debug.ThreadsWindow$AllThreadsPanel.threadsWin
dowSettingsChanged(ThreadsWindow.java:408)
at oracle.jdevimpl.runner.debug.ThreadsWindow.threadsWindowSettingsChang
ed(ThreadsWindow.java:138)
at oracle.jdevimpl.runner.debug.ThreadsWindow.<init>(ThreadsWindow.java:
112)
at oracle.jdevimpl.runner.debug.JDebugger.getThreadsWindow(JDebugger.jav
a:3048)
at oracle.jdevimpl.runner.debug.DebuggingProcess.selected(DebuggingProce
ss.java:565)
at oracle.ideimpl.runner.RunManager.viewSelectionChanged(RunManager.java
:467)
at oracle.ide.addin.AbstractView.fireViewSelectionChanged(AbstractView.j
ava:484)
at oracle.ideri.navigator.DefaultNavigatorWindow.fireViewSelectionChange
d(DefaultNavigatorWindow.java:791)
at oracle.ideri.navigator.DefaultNavigatorWindow$3.viewSelectionChanged(
DefaultNavigatorWindow.java:1218)
at oracle.ide.addin.AbstractView.fireViewSelectionChanged(AbstractView.j
ava:484)
at oracle.ideimpl.explorer.BaseTreeExplorer.actionPerformed(BaseTreeExpl
orer.java:2077)
at javax.swing.Timer.fireActionPerformed(Timer.java:271)
at javax.swing.Timer$DoPostEvent.run(Timer.java:201)
at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:178)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:454)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThJohn,
You mentioned "I closed the IDE so that the TopLink project would pick up the changes..."
1. We need to find out why you needed to close the IDE? Was TopLink mapping editor not picking up your changes?
2. I am sure you did not modified .java outside of Jdev, but in case if you did, let me know.
3. After removing a superclass attribute, did you save all changes?
4. We tried various combinations, but were unable to reproduce the project reopen issue that you mentioned was fixed by changing the ClassDescriptor.xml. It would be extremely helpful if you could either send us (anuj dot k dot jain at oracle dot com) a project that can reproduce this issue, or outline the exact steps. -
Exception while creating JCo client connection Failed to create
Hello all -
I am trying to create JCo metadata connections and I am getting the below error trace.
Exception while creating JCo client connection Failed to create new JCO client connection SAP_R3_HumanResources_Metadata: com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to change password for key SAP_R3_HumanResources_Metadata in secure storage at com.sap.tc.webdynpro.serverimpl.wdc.sl.SecureStorageWrapper.changePassword(SecureStorageWrapper.java:149) at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.createJCOClientConnection(SystemLandscapeFactory.java:299) at com.sap.tc.webdynpro.services.sal.sl.api.WDSystemLandscape.createJCOClientConnection(WDSystemLandscape.java:107) at com.sap.tc.webdynpro.tools.sld.ButtonBar.onActionFinish(ButtonBar.java:265) at com.sap.tc.webdynpro.tools.sld.wdp.InternalButtonBar.wdInvokeEventHandler(InternalButtonBar.java:265) at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87) at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67) at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420) at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132) at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335) at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143) at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321) at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713) at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666) at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250) at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53) at javax.servlet.http.HttpServlet.service(HttpServlet.java:760) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364) at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039) at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265) at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95) at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176) Caused by: com.sap.security.core.server.securestorage.exception.ObjectStorageException at com.sap.security.core.server.securestorage.remote.RemoteSecureStorageClientContextImpl.storeObject(RemoteSecureStorageClientContextImpl.java:600) at com.sap.tc.webdynpro.serverimpl.wdc.sl.SecureStorageWrapper.changePassword(SecureStorageWrapper.java:137) ... 33 more
Could anybody please suggest what is wrong with this creation?
Thanks much!!Hi Maria,
Please update the host and sevice file first then check the SLD test and SLD Data supplier in visual admin.
Also check and verify the data using in the Jco destination creation.
Hope it will helps
Regards
Arun Jaiswal -
Thread was being aborted Exception while creating large number of Sites in SharePoint 2013
Hi All,
I am getting threading exception while creating a large extent of sites in SharePoint 2013. I am reading data from an excel file and then looping each row. The sites are creating for first two rows then i am getting exception. This code working fine in dev
server but not in UAT server. I tried with changing maxRequestLength in web.config but not working. And also followed the below link.
http://support.microsoft.com/kb/928756
My code as follows-
private void CreateSites(DataRow dr)
try
using (SPSite site = new SPSite(OtherSiteCollection)) // I am creating sites in another site collection
using (SPWeb web = site.OpenWeb())
SPWeb newWeb = null;
SPWebTemplateCollection templates = site.RootWeb.GetAvailableWebTemplates(1033);
SPWebTemplate template = (from SPWebTemplate m in
templates
where m.Title == "SiteTemplate"
select m).FirstOrDefault(); //Here i am using custom template
string siteName = dr["Site Name"].ToString();
newWeb = web.Webs.Add(siteTitle, siteTitle, siteDescription, 1033, template, true, false); //Getting exception here.
newWeb.Update();
newWeb.Dispose();
catch (Exception ex)
lblMsg.Text = "Exception in create sites : " + ex.Message + ";" + ex.StackTrace + ";" + ex.ToString()
I am getting error as-
Exception in create sites: Thread was being aborted.; at Microsoft.SharePoint.Library.SPRequestInternalClass.ApplyWebTemplate(String bstrUrl, String bstrWebTemplateContent, Int32 fWebTemplateContentFromSubweb, Int32 fDeleteGlobalListsWithWebTemplateContent,
String& bstrWebTemplate, Int32& plWebTemplateId)
at Microsoft.SharePoint.Library.SPRequest.ApplyWebTemplate(String bstrUrl, String bstrWebTemplateContent, Int32 fWebTemplateContentFromSubweb, Int32 fDeleteGlobalListsWithWebTemplateContent, String& bstrWebTemplate, Int32& plWebTemplateId)
at Microsoft.SharePoint.SPWeb.ProvisionWebTemplate(SPWebTemplate webTemplate, String webTemplateToUse, SPFeatureWebTemplate featureWebTemplate)
at Microsoft.SharePoint.SPWeb.ApplyWebTemplate(SPWebTemplate webTemplate)
at Microsoft.SharePoint.SPWeb.CreateWeb(String strWebUrl, String strTitle, String strDescription, UInt32 nLCID, String strWebTemplate, Boolean bCreateUniqueSubweb, Boolean bConvertIfThere, Guid appInstanceId)
at Microsoft.SharePoint.SPWeb.SPWebCollectionProvider.CreateWeb(String strWebUrl, String strTitle, String strDescription, UInt32 nLCID, String strWebTemplate, Boolean bCreateUniqueSubweb, Boolean bConvertIfThere, Guid appInstanceId)
at Microsoft.SharePoint.SPWebCollection.Add(String strWebUrl, String strTitle, String strDescription, UInt32 nLCID, String strWebTemplate, Boolean useUniquePermissions, Boolean bConvertIfThere, Guid appInstanceId)
at Microsoft.SharePoint.SPWebCollection.Add(String strWebUrl, String strTitle, String strDescription, UInt32 nLCID, SPWebTemplate WebTemplate, Boolean useUniquePermissions, Boolean bConvertIfThere)
System.Threading.ThreadAbortException: Thread was being aborted.
at Microsoft.SharePoint.Library.SPRequestInternalClass.ApplyWebTemplate(String bstrUrl, String bstrWebTemplateContent, Int32 fWebTemplateContentFromSubweb, Int32 fDeleteGlobalListsWithWebTemplateContent, String& bstrWebTemplate, Int32&
plWebTemplateId)
at Microsoft.SharePoint.Library.SPRequest.ApplyWebTemplate(String bstrUrl, String bstrWebTemplateContent, Int32 fWebTemplateContentFromSubweb, Int32 fDeleteGlobalListsWithWebTemplateContent, String& bstrWebTemplate, Int32& plWebTemplateId)
at Microsoft.SharePoint.SPWeb.ProvisionWebTemplate(SPWebTemplate webTemplate, String webTemplateToUse, SPFeatureWebTemplate featureWebTemplate)
at Microsoft.SharePoint.SPWeb.ApplyWebTemplate(SPWebTemplate webTemplate)
at Microsoft.SharePoint.SPWeb.CreateWeb(String strWebUrl, String strTitle, String strDescription, UInt32 nLCID, String strWebTemplate, Boolean bCreateUniqueSubweb, Boolean bConvertIfThere, Guid appInstanceId)
at Microsoft.SharePoint.SPWeb.SPWebCollectionProvider.CreateWeb(String strWebUrl, String strTitle, String strDescription, UInt32 nLCID, String strWebTemplate, Boolean bCreateUniqueSubweb, Boolean bConvertIfThere, Guid appInstanceId)
at Microsoft.SharePoint.SPWebCollection.Add(String strWebUrl, String strTitle, String strDescription, UInt32 nLCID, String strWebTemplate, Boolean useUniquePermissions, Boolean bConvertIfThere, Guid appInstanceId)
at Microsoft.SharePoint.SPWebCollection.Add(String strWebUrl, String strTitle, String strDescription, UInt32 nLCID, SPWebTemplate WebTemplate, Boolean useUniquePermissions, Boolean bConvertIfThere)
Thread was being aborted.; at System.Threading.ThreadAbortException: Thread was being aborted.
Can anyone please help. Thanks!
dineshIf you do this from a Console application, does it succeed?
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
Save Query - An error occurred while creating connection strings for the query
A workbook trying to edit and reload I get the following error "Save Query - An error occurred while creating connection strings for the query" No Power Pivot data model or anything.
I am getting the same error when editing a Power Query in an Excel spreadsheet. It happens when I change a Group By step to do a Sum instead of Count Rows.
-
Time Machine error while creating backup folder
Several times today I have gotten a popup message. "Time Machine error while creating backup folder". I click OK, and then the message appears again after a hour or so. I am using a WD My Book external drive as my backup media. I looked at the drive in Finder and the older (yesterday and beyond) backup folders are there.
always a pleasure doing business with you, dear sir
JGG
-
How dynamically create connection pool and Datasource
Hi
How I can dynamically create a connection pool and Data source in Oracle 10g Application server. In our J2EE application the user will be login with db user name, password and database name. I want to create connection pool and data source on the fly while login the user with database name. I our application we have access approximate 80 Databases. so my approach is given bellow
1) Planning to create 80 connection pools and 80 Data sources so when user logs in while selecting the db name i will call the appropriate data source and create the DB connection. Is there any limitation to create number of data sources in oracle app server?
2) Create DB connection with out using connection pool and data source. But i am not prefer this approach coz we need to handle some transaction in our application.
Kindly throw some light on managing connection pool programmatically or in application run time.
I would really appreciate if any one can provide any links or any inormation on this issue.
Thanks in advance.Kindly let me know is there any drawbacks to create 80 Data Sources to connect 80 database in Oracle 10G App server and each data sources should have one connection pool. so i need to create 80 connection pool. Please let me know is this right approach or any work around to create Data source on fly for each request for corresponding database.
-
Problem with creating Connection pool and JNDI, driver is not detected
Hi,
I have an issue with creating Connection Pool and JNDI.
I'm using:
- JDK 1.6
- OS: Linux(ubuntu 8.10)
- Netbeans IDE 6.5.1
- Java EE 5.0
- Apache Tomcat 6.0.18 Its lib directory contains all necessary jar files for Oracle database driver
- Oracle 11g Enterprise
My problem is that the Oracle database driver is not detected when I want to create a pool (it works pretty well and is detected without any problem when I create ordinary connection by DriverManager)
Therefore after running:
InitialContext ic = new InitialContext();
Context context = (Context)ic.lookup("java:comp/env");
DataSource dataSource = (DataSource)context.lookup("jdbc/oracle11g");
Connection connection = dataSource.getConnection();and right after dataSource.getConnection() I have the following exception:
org.apache.tomcat.dbcp.dbcp.SQLNestedException: Cannot load JDBC driver class 'oracle.jdbc.OracleDriver'
at org.apache.tomcat.dbcp.dbcp.BasicDataSource.createDataSource(BasicDataSource.java:1136)
at org.apache.tomcat.dbcp.dbcp.BasicDataSource.getConnection(BasicDataSource.java:880)
at servlets.Servlet1.doPost(Servlet1.java:47)
at servlets.Servlet1.doGet(Servlet1.java:29)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:617)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:286)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:845)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:583)
at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:447)
at java.lang.Thread.run(Thread.java:619)
Caused by: java.lang.ClassNotFoundException: oracle.jdbc.OracleDriver
at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at sun.misc.Launcher$ExtClassLoader.findClass(Launcher.java:229)
at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
at java.lang.ClassLoader.loadClass(ClassLoader.java:252)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:320)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:169)
at org.apache.tomcat.dbcp.dbcp.BasicDataSource.createDataSource(BasicDataSource.java:1130)
... 17 more
My application context file (context.xml) is:
<?xml version="1.0" encoding="UTF-8"?>
<Context path="/WebApplication3">
<Resource auth="Container"
driverClassName="oracle.jdbc.OracleDriver"
maxActive="8"
maxIdle="4"
name="jdbc/oracle11g"
username="scott"
password="tiger"
type="javax.sql.DataSource"
url="jdbc:oracle:thin:@localhost:1521:database01" />
</Context>and my web.xml is:
<resource-ref>
<description>Oracle Datasource example</description>
<res-ref-name>jdbc/oracle11g</res-ref-name>
<res-type>javax.sql.DataSource</res-type>
<res-auth>Container</res-auth>
</resource-ref>
...I found similar threads in different forums including sun, such as
http://forums.sun.com/thread.jspa?threadID=567630&start=0&tstart=0
http://forums.sun.com/thread.jspa?threadID=639243&tstart=0
http://forums.sun.com/thread.jspa?threadID=5312178&tstart=0
, but no solution.
As many suggest, I also tried to put context directly in the server.xml (instead of my application context) and referencing it by <ResourceLink /> inside my application context but it didn't work and instead it gave me the following message:
org.apache.tomcat.dbcp.dbcp.SQLNestedException: Cannot create JDBC driver of class ' ' for connect URL 'null'
Has anyone succeeded in creating a connection pool with JNDI by using Tomcat 6 or higher ? If yes, could kindly explain about the applied method.
Regards,Hello again,
Finally I managed to run my application also with Tomcat 6.0.18. There was only two lines that had to be modified
in the context.xml file (the context of my application project and not server's)
Instead of writing
<Context antiJARLocking="true" path="/WebApplication2">
type="javax.sql.DataSource"
factory="org.apache.tomcat.dbcp.dbcp.BasicDataSourceFactory"
</Context>we had to write:
<Context antiJARLocking="true" path="/WebApplication2">
type="oracle.jdbc.pool.OracleDataSource"
factory="oracle.jdbc.pool.OracleDataSourceFactory"
</Context>- No modification was needed to be done at server level (niether server.xml nor server context.xml)
- I just added the ojdbc6.jar in $CATALINA_HOME/lib (I didn't even need to add it in WEB-INF/lib of my project)
- The servlet used to do the test was the same that I presented in my precedent post.
For those who have encountered my problem and are interested in the format of the web.xml and context.xml
with Tomcat 6.0, you can find them below:
Oracle server: Oracle 11g Enterprise
Tomcat server version: 6.0.18
Oracle driver: ojdbc.jar
IDE: Netbeans 6.5.1
The context.xml file of the web application
<?xml version="1.0" encoding="UTF-8"?>
<Context antiJARLocking="true" path="/WebApplication2">
<Resource name="jdbc/oracle11g"
type="oracle.jdbc.pool.OracleDataSource"
factory="oracle.jdbc.pool.OracleDataSourceFactory"
url="jdbc:oracle:thin:@localhost:1521:database01"
driverClassName="oracle.jdbc.OracleDriver"
userName="scott"
password="tiger"
auth="Container"
maxActive="100"
maxIdle="30"
maxWait="10000"
logAbandoned="true"
removeAbandoned="true"
removeAbandonedTimeout="60" />
</Context>The web.xml of my web application
<?xml version="1.0" encoding="UTF-8"?>
<web-app version="2.5" xmlns="http://java.sun.com/xml/ns/javaee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd">
<resource-ref>
<description>Oracle Database 11g DataSource</description>
<res-type>oracle.jdbc.pool.OracleDataSource</res-type>
<res-auth>Container</res-auth>
<res-ref-name>jdbc/oracle11g</res-ref-name>
</resource-ref>
<servlet>
<servlet-name>Servlet1</servlet-name>
<servlet-class>servlets.Servlet1</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>Servlet1</servlet-name>
<url-pattern>/Servlet1</url-pattern>
</servlet-mapping>
<session-config>
<session-timeout>
30
</session-timeout>
</session-config>
<welcome-file-list>
<welcome-file>index.jsp</welcome-file>
</welcome-file-list>
</web-app>Ok, now I'm happy as the original problem is completely solved
Regards -
Cant create connection Pool for MS SQL Server 2000 with Microsoft Driver
i am using bea weblogic server 6.1, i cant create connection pool while using MS
SQL Server 2000. i have installed JDBC Driver SAP1 from microsoft website. when
i give the following class name for JDBC driver and the connection url and click
apply while selecting the available server, a number of exception appears in default
server (that is the connection pool cannot be created..... cannot load the driver
class).
URL= jdbc:Microsoft:sqlserver://127.0.0.1:1433;DatabaseName=MyDB
Driver= com.microsoft.jdbc.sqlserver.SQLServerDriver
when i use the above setting in a JDBC simple application in Jbuilder
7.0 the application runs successfully and fetches the data deom MS SQL database
but in at Bea connection Pool is not created with these settings. i do give appropriate
username and password in properties field in connection pool. Thankx for any help!khabbab wrote:
That was the original code part from "startweblogic" :
:runWebLogic
echo on
set PATH=.\bin;%PATH%
set CLASSPATH=.;.\lib\weblogic_sp.jar;.\lib\weblogic.jar;
echo off
and i changed it to :
:runWebLogic
echo on
set PATH=.\bin;%PATH%
set CLASSPATH=.;.\lib\weblogic_sp.jar;.\lib\weblogic.jar;D:\Program Files\Microsoft
SQL Server 2000 Driver for JDBC\lib\msbase.jar;D:\Program Files\Microsoft SQL
Server 2000 Driver for JDBC\lib\msutil.jar;D:\Program Files\Microsoft SQL Server
2000 Driver for JDBC\lib\mssqlserver.jar;I suggest moving or copying the three ms driver jars to a directory that has no blanks
in it so the classpath doesn't have blanks in it. Ie:
go to the "D:\Program Files\Microsoft SQL Server 2000 Driver for JDBC\lib"
directory and do this:
mkdir D:\microsoft_jdbc_driver
cp *.jar D:\microsoft_jdbc_driver
Then make the classpath include D:\microsoft_jdbc_driver\msbase.jar etc.
Joe
>
>
echo off
when i save and run the bat file, server appears then disappears.
Joseph Weinstein <[email protected]_this> wrote:
khabbab wrote:
The class path which is echoed at server startup does not include thepaths to
driver jar files. when i edited the "startweblogic.bat" file and includedthe
driver class paths to jar files, now the server doesnot even run. tellme what
to do now???Show me what change you made to the startweblogic file.
Joe
Joseph Weinstein <[email protected]_this> wrote:
khabbab wrote:
kindly tell me how can i check that the class paths for driver jarfiles are included
in that string? thanks. also tell me can not i use the jdriver forsql server
2000?.The startup script will echo what it's doing, including printing out
the classpath
it will use. Yes you can use the jDriver for MS SQL2000. It is sufficient
for
basic JDBC, but the MS drivfer is preferable in some ways.
Joe
Joseph Weinstein <[email protected]_this> wrote:
khabbab wrote:
i am using bea weblogic server 6.1, i cant create connection
pool
while
using MS
SQL Server 2000. i have installed JDBC Driver SAP1 from microsoft
website.
when
i give the following class name for JDBC driver and the connectionurl and click
apply while selecting the available server, a number of exception
appears
in default
server (that is the connection pool cannot be created..... cannot
load
the driver
class).The server startup script creates a string that will become the
classpath
for the server.
This string is part of the java call to start the server with a-classpath
argument. You need to
make sure the MS driver jars are part of that classpath string.
Joe
URL= jdbc:Microsoft:sqlserver://127.0.0.1:1433;DatabaseName=MyDB
Driver= com.microsoft.jdbc.sqlserver.SQLServerDriver
when i use the above setting in a JDBC simple applicationin Jbuilder
7.0 the application runs successfully and fetches the data deom
MS
SQL database
but in at Bea connection Pool is not created with these settings.
i
do give appropriate
username and password in properties field in connection pool.
Thankx
for any help!
khabbab wrote:
The class path which is echoed at server startup does not include thepaths to
driver jar files. when i edited the "startweblogic.bat" file and includedthe
driver class paths to jar files, now the server doesnot even run. tellme what
to do now???
Joseph Weinstein <[email protected]_this> wrote:
khabbab wrote:
kindly tell me how can i check that the class paths for driver jarfiles are included
in that string? thanks. also tell me can not i use the jdriver forsql server
2000?.The startup script will echo what it's doing, including printing out
the classpath
it will use. Yes you can use the jDriver for MS SQL2000. It is sufficient
for
basic JDBC, but the MS drivfer is preferable in some ways.
Joe
Joseph Weinstein <[email protected]_this> wrote:
khabbab wrote:
i am using bea weblogic server 6.1, i cant create connection
pool
while
using MS
SQL Server 2000. i have installed JDBC Driver SAP1 from microsoft
website.
when
i give the following class name for JDBC driver and the connectionurl and click
apply while selecting the available server, a number of exception
appears
in default
server (that is the connection pool cannot be created..... cannot
load
the driver
class).The server startup script creates a string that will become the
classpath
for the server.
This string is part of the java call to start the server with a-classpath
argument. You need to
make sure the MS driver jars are part of that classpath string.
Joe
URL= jdbc:Microsoft:sqlserver://127.0.0.1:1433;DatabaseName=MyDB
Driver= com.microsoft.jdbc.sqlserver.SQLServerDriver
when i use the above setting in a JDBC simple applicationin Jbuilder
7.0 the application runs successfully and fetches the data deom
MS
SQL database
but in at Bea connection Pool is not created with these settings.
i
do give appropriate
username and password in properties field in connection pool.
Thankx
for any help! -
Fatal error while filling connection pool
I was not getting a connection to an Oracle database and I was getting the following error in cms.log: "FATAL Connector - Unable to create connection pool for T_Orbis_Oracle: Fatal error while filling connection pool for jdbc:oracle:thin:@MESDB:1521:ASPENB21" where T_Orbis_Oracle is the xMII link name and the database ASPENB21 is on server MESDB. I changed the database username in the link to SYSTEM and I then got a connection and a Created Connection pool message in the log. I then changed back to the username which originally was giving the error and it now also gave me a successful connection. I am now worried that there is an issue in the background which is gradually building up and will begin to fail again as previously. Can anyone explain what is causing this problem and suggest how I can correct it? Thanks, John.
John,
Check you have installed the JDBC driver ojdbc14.jar (works for both 9 and 10).
Also check the server package:
MII 11.x--->ServerPackage com.lighthammer.Illuminator.connectors.IDBC
MII 12.x--->com.sap.xmii.Illuminator.connectors.IDBC
Carefull when you set up the string because some oracle databases have servicenames instead of SID, and the url was different if you use them instead of the SID.
For services names the url is jdbc:oracle:thin@host:port:SID
Also check your Network firewall between MII and DB and ports too.
Oracle9i installs with a number of default accounts.You must unlock all other accounts before using them. Oracle recommends changing all user passwords immediately after installation.
-Suresh
Edited by: Suresh Hiremath on Jul 29, 2009 8:20 AM
Maybe you are looking for
-
HT204053 Should a family share an apple id, or does each phone need its own apple id?
Should a family share an apple id, or does each phone need its own apple id?
-
How to find all exclamation marks/error photos in library
Hi, Thanks to the forums, I know how to get rid of the exclamation marks (rebuilding, etc). But first, I want to locate all the dead links. The only way I'll know right now if a thumbnail is dead is if I double click on it and see the exclamation mar
-
Mac air shuts down when i connect usb
everytime i connect a usb to the port my mac ***** down.. why is this happening and what can i do about it??? any help is apreciated cuz im not good with technology
-
Hi Iam having MTO scenario. I have created sales order and run MRP. It creates planned order and purchase requisitions for procured items. All procured items are individual. When planned order of header material is converted into production orders. W
-
How to create DataSource for FlatFile Source Systems
Hi, I am practicing BI7.I am familiar with BW 3.5 but while practicing BI7 i am facing some problems.I am trying to load master data of an infoobject (STUDENTID) STUDENTID ATTR. After creating Appl Comp and when i am trying to create transformations