[NEWBIE] NWDI Missing Domain Issue in Login

Hi Experts,
I would like to ask why when I login to NWDS I had the following error below.
Build Server http://p77ix100:50000 is unreachable.
DTR Server http://p77ix100:50000/dtr is unreachable.
The error is that the domain it should have is missing.
It should have for example ".na.sap.com" to be "http://p77ix100.na.sap.com:50000/dtr".
But I didn't configure anything for p77ix100 in the NWDS.
However the only thing I configured is the Development Configuration Pool for example:
"http://pb8ix100.na.sap.com:50000"
Can you please help me how for the DTR Server be automatically get the domain it should have?
Thank you very much,
Jemaru
Edited by: jemaru on Mar 9, 2010 5:09 PM

Hi everyone!
Thank you for your help and suggestions it all help me learn!
Now i can connect to DTR in Netweaver Developer Studio.
However I only solved problem by editing the hosts file.
C:\WINDOWS\system32\drivers\etc\hosts
Now it contains something like this:
127.0.0.1       localhost
111.111.111.111       p77ix100.na.sap.com
111.111.111.111        p77ix100
Note:
111.111.111.111 represents the IP address of your DTR server.
You should get the IP addresss from your Basis.
This was confusing to solve because it needs to do manual configuration while I thought this should be done by the NWDS itself during installation or atleast the configuration should be done in NWDS.
I hope this helps other people also.
Thank you very much,
jemaru

Similar Messages

OS X 10.6.4 & AD Domain Issues

I have a Macbook Pro with OS X 10.6.4 that is joined to an AD domain. However, I cannot login to the domain on this Macbook. At the login screen, the status light is green, but I still cannot login.
With my previous experiences with Macs, our network uses OD on our xserve to communicate with our AD domain. However, this new Macbook hardware is already joined to the domain, but cannot login any AD accounts.
Where should I start?
The AD domain that I am trying to bind the Macbook to is not a FQDN. It is a .local domain name and I fear that may be my issue with 10.6.4
Any and all help would be appreciated. I have looked at this article:
http://support.apple.com/kb/TS2250?viewlocale=en_US
and I am uncertain if this could be the issue as well.
Thanks,
Andy H

Thanks for the info. I've just trashed Safari and reinstalled it, fixed permissions and rebooted and I'm having the same problem.
The problem also exists still in Quicktime so I reinstalled iTunes and no diff.
I then tried creating a new user account and logging in but the problem persists...
I also checked to see if the file / command is located @ /Applications/Safari.app/Contents/MacOS/Safari
Expected in: /System/Library/Frameworks/CoreLocation.framework/Versions/A/CoreLocation and it seems to be there, so not sure why it can't be referenced...
Any other ideas?

How do I fix Mountain Lion issue after login where Keychain Access attempts to open, hanging up with "application not responding" message?

How do I fix Mountain Lion issue after login where Keychain Access attempts to open, hanging up with "application not responding" message?

You could try booting into Safe Mode to see if that will help. And "Repair Permissions" in Disk Utility.
Have you got Keychain set to open on Login or is it attempting to open on it's own.

Safari Auto Fill Issue - Same domain with multiple logins

Hello Group,
I am working with Safari's Auto Fill feature for user names and passwords on website pages that I log into and it is not doing what I would like it to do. For some reason I am unable to save more than one login per domain and is not seeing the entire url path. If save my user name and password for say this url path of ************* it will save the user name and password but when you look in safari->preferences->autofill, its only showing the top level of the domain and not the entire path.
And if there is a different page on the site located at a completely different url path such as *********** that I need to log into and I try to save a user name and password for this different url path, it asks me if i want to update the current user name and password, and I don't want to do that, I want to save a new different user name and password for this second login screen.
Is there anyway to get this to see the entire url and remember separate logins for each different page on the same domain? Thanks.
Doug
<Edited by Host, URL's removed>

To the moderator. Thank you for approving my post, but how am I suppose to show what I am talking about if you go and remove the url examples I put in my post? The links were not bad, spam or etc, they were just examples paths I made up.
Doug

Windows 8.1 Pro join to domain issues....

We bought some Windows 8.1 laptops and purchased the upgrade to the Pro version. When I attempt to join the laptops to the domain, it prompts me for domain credentials, I enter them, and I get an error....
Changing the Primary Domain DNS name of this computer to "mydomain.com" failed.
The name will remain "mydomain.com". The error was:
The specified domain either does not exist or could not be contacted.
Of course, the domain DOES exist and we have plenty of Windows 7 workstations signed into it just fine. I hit OK then login to the laptop using a domain account. At this point, I get an error telling me that no logon servers are available to authenticate.
This is a Windows 2008 domain controlled environment. Everything works fine otherwise for the Windows 7 systems, only these Windows 8.1 systems are having any issues. The new laptops are even showing up in DNS on the domain controller.
Any ideas what I might be missing? Is there something special about joining Windows 8.1 Pro systems to a domain?

OK; took a couple of more days than planned to get back on site. We're continuing to do testing, but here's the IPConfig /ALL that was requested. 10.0.0.1 is the gateway, 10.0.0.10 is the DC. The laptop is "Me-L" and the domain is "mydomain.com".
The below was pulled after getting IP information assigned via DHCP. The laptop is not joined to the domain at the moment and login is a local account.
Windows IP Configuration
Host Name . . . . . . . . . . . . : Me-L
Primary Dns Suffix . . . . . . . : mydomain.com
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : mydomain.com
Wireless LAN adapter Local Area Connection* 3:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Wi-Fi Direct Virtual Adapter
Physical Address. . . . . . . . . : A0-88-69-46-A4-CF
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Ethernet adapter Bluetooth Network Connection:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Bluetooth Device (Personal Area Network)
Physical Address. . . . . . . . . : A0-88-69-46-A4-D2
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Ethernet adapter Ethernet:
Connection-specific DNS Suffix . : mydomain.com
Description . . . . . . . . . . . : Realtek PCIe FE Family Controller
Physical Address. . . . . . . . . : EC-F4-BB-9C-36-56
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IPv4 Address. . . . . . . . . . . : 10.0.0.108(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Thursday, August 21, 2014 11:29:52 AM
Lease Expires . . . . . . . . . . : Wednesday, August 27, 2014 11:29:50 AM
Default Gateway . . . . . . . . . : 10.0.0.1
DHCP Server . . . . . . . . . . . : 10.0.0.10
DNS Servers . . . . . . . . . . . : 10.0.0.10
10.0.0.10
NetBIOS over Tcpip. . . . . . . . : Enabled
Wireless LAN adapter Wi-Fi:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) Dual Band Wireless-AC 3160
Physical Address. . . . . . . . . : A0-88-69-46-A4-CE
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Partner application configuration is missing error on SSO login page

We have APEX 3.1.2 setup as a partner application and an application within APEX setup to use SSO for authentication. Following a link to the APEX application redirects to the Single Sign-On page, as it should, but it also shows "Error: The partner application configuration is missing or expired." I type in my password and username, click the Login button, and (if I entered my username and password correctly, of course!) then the APEX application is shown. So, I cannot figure out why we're getting the no_papp_err error and I have not found any solutions to that issue on Metalink or anywhere else on the Internet. Any ideas? I'm concerned that we have a misconfiguration somewhere that is causing this error and will affect any other partner application we setup in the future.
We're on Oracle Portal 10.1.4, SSO 10.1.2, and SSL is setup on both infra and mid tiers.

Did you try checking the partner application entries on the SSO-login server page?
please login as orcladmin or some other user with membership in, i beleive, iasadmins group. verify that for this partner application, what you see here corresponds to the application URL. it looks like your login page call may have issues. so check for login url too.
also check the ORASSO.WWSSO_LS_CONFIGURATION_INFO$ for entries corresponding to Apex application.

Iweb missing font issue

When I open iweb I get a pop up window which tells me that there's a missing font CourierNewPSMT
Could someone tell me how to get rid of it, and it only happens in Freestyle template
I couldn't find CourierNewPSMT font anywhere

Hi,
I suddenly started getting messages in iWeb that said the Font "ArialMT" is substituted for the missing font "Arial".. But it was only happening on new pages I had created.. Can't say what had changed much on my system for this to occur.. But had me baffled because FontBook HAD Arial and NO ArialMT..
Anyway to cut a long story short.. I didn't want Arial as the font anyway as we're changing over to Verdana.. It didn't matter if I selected all on the webpage and changed it all to Verdana, i'd still get the error message regarding ArialMT and Arial..
So my fix was to navigate to: ~/Library/Application Support/iWeb/
1. Copy the file "Domain" somewhere else as a backup (desktop is good)
2. Right click on the "Domain" file inside ~/Library/Application Support/iWeb/ and Show Package Contents
Now this is where many people say open index.xml.gz and look for the problem fonts.. Well in my experience index.xml doesn't have any code regarding fonts.. SO another folder caught my attention inside "Domain" called "domain-0B29016B-4545-4DC4-9DDB-74AA1E25AJ34.. If you have this folder it will probably have a different string of letters and numbers to mine..
3. Go into your "domain-xxx etc" folder and navigate down to the first compressed xml file you can fint.. I had like 30 because I have almost 30 blog type pages in my site (just the way its designed I guess).. Anyway if you uncompress the .xml.gz file you've found and open that in text edit you'll probably be able to find font information in there.
As I had many to have to find and replace on I found it easier, to select all the .gz files and open them all together which mass uncompressed them in their relative locations.. Then I had to go through and delete the original .gz files otherwise iWeb won't save and publish the code changes you make. In otherwords, you need to have ONLY .xml files left over and iWeb will recompress them when you save in iWeb next.. I also used dreamweaver to mass find and replace the code, but textedit can do it one by one.
Hope this helps anyone having this issue..
I know if I went and made a brand new page in iWeb it will get this font issue again on the new page.. So my next task is to find the original template files and change the font instances in it so new pages don't cause headaches..

Create new domain but cannot login

I'm using Directory Server 5.2, Messaging Server 5.2, IDA 45
I installed Messaging Server and I'm using domain itc.my, then I created several accounts under the new domain and it worked fine..I can login, sent and receive emails..then I decided to create a new domain, stud.itc.my using the command imadmin domain create...
imadmin domain create -D serviceadmin -d stud.itc.my -H mailhost.itc.my -n itc.my -w xxxx
I managed to create the domain....then I add several new user accounts under the new domain using the IDA...when I try to login Messaging Server using the new accounts, it's give error message
Invalid username or password
What steps did I miss to create a new domain?

for any domains other than the "default domain", your login must include the domain:
userid@domain
instead of
userid

IChat domain issue

I am having an issue with iChat where I can't clients to login with (username)@(domain name) when the user name is a Open Directory user account. It works fine if local account. I can get Open Dir user to login if I use a fqdn (ichat.domain name.org). I do have the domain name listed in the Host Domain's list via Server Admin tool. DNS is hosted internally off the server and Externally by a hosting provider. Seeing that the local account works just fine externally and internally, I wondering if there is something other than DNS that is causing the issue. The only error I is: ODKVerifyClientRequestFixed: Unable to authenticate.
I have search the forum and not been able to find anyone having this kind of issue. Does anyone have any ideas what could cause this issue?

Hi,
The problem is DNS related. You need to log in with a FQDN.
[This |http://discussions.apple.com/thread.jspa?threadID=2298811&tstart=-1] is probably the most extensive thread that talks about the problem.
If you still need help after reading that - please post real details from *sudo serveradmin settings jabber*, and *sudo changeip -checkhostname*
Tim

Tuxedo domain issue

There is a very strange case here in my application. The GWTDOMAIN always terminated
abnormally and restarted again. I checked the core dump file it generated and
it showed me that it happened in '_tmrunserver()'. I do not know why.

Folks,
Hello. I am confusing !
There are 3 options ( sysdba, sysoper and sysasm ) for the command SQLPLUS.
Let me explain the commands one by one as below:
First, the command $./sqlplus AccessId/myPwd cannot connect with SQL> and then we cannot start up Database Instance HRCS90 !
Second, I run sysdba option in the following order:
$./sqlplus AccessId/myPwd as sysdba
SQL>startup
SQL>@/opt/PT8.53/scripts/rel853.sql
SQL> select OPERPSDWSALT from AccessId.PSOPRDEFN;
Its output: OPERPSWDSALT: invalid identifier. I have checked the field is not created into table PSOPRDEFN.
Third, I run sysoper option in the following order:
SQL>shutdown immediate;
SQL>exit
$./sqlplus AccessId/myPwd as sysoper
SQL>startup
SQL>@/opt/PT8.53/scripts/rel853.sql
When run rel853.sql, I saw many insufficient priviledges regarding Create Tables.
SQL> select OPERPSWDSALT from AccessId.PSOPRDEFN;
Its output: OPERPSWDSALT : invalid identifier. This error is the same with option sysdba.
Fourth, I run sysasm option as below:
SQL>shutdown immediate;
SQL>exit
$./sqlplus AccessId/myPwd as sysasm
It returns: Logon denied.
As we see above, I have tried 3 options(sysdba, sysoper, sysasm) to run the command sqlplus AccessId/myPwd but the result of script rel853.sql is not right.
My question is:
Can any folk tell me the correct order and commands to run the script rel853.sql ?
Thanks.
Folks,
Hello. All of the above 3 options are wrong. I have done below:
$./sqlplus / as sysdba
SQL>show user;
USER is "SYS"
SQL>startup
SQL>connect AccessId/myPwd
SQL>show USER;
USER is "AccessId"
SQL>@/opt/PT8.53/scripts/rel853.sql
Script completed.
Application Designer login into Database HRCS90 successfully now.
Tuxedo Application Server boot domain HRCS90 with 8 processes started.
The issue is solved. Thank you all very much.

Log onto domain issue

hello all
as i start my computer and get to login screen, it appears that my domain account isn't always available
i cannot login using domain\username as the only option i have is to type an email address.
rebooting the computer several times makes the login eventually appear, but it's painful and inconsistent.
did anyone come across this issue? any workaround or fixes?

Hi tiita79,
Apologize for the late reply.
What is your current situation?
The domain logon works at my side, Window 10 Technical Preview 9879, domain joined.
If you couldn't access the User Account list through the Back button on the logon screen, you may take a try to add a key under the following registry:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
Then right click on ProfileList, choose New, select key, name it to .DEFAULT.
After that, close the registry editor, and log off, this time you will see the
last logged on User account and the other user option.
Hope the above would be helpful.
One more thing, please take use of Windows Feedback Tool to submit what you have encountered.
Best regards
Michael Shao
TechNet Community Support

Joined to domain issues?

Has anyone else had this issue. I installed Windows 10 9926 as a hyper-v VM. Everything worked on it, the Start button and the cortana search bar. Once I joined it to the domain and rebooted the start menu doesn't work or the search bar next to the start
button. When I click the start button nothing happens, as well as on the search bar. Anybody else experience this. I also have the update installed.

Hi Anthony,
Please note the findings below:
1. I was checking the Lync Client configuration on one of the PC that is not joined to the domain, still on the domain network via site to site VPN connection. I noticed that the Connected Lync Server varies: sipinternal.domain.com, sipexternal.domain.com,
lync.domain.com (Pointing to the Edge Server IP).
2. Edge Server External Settings: Single IP address with the FQDN set to lync.domain.com for all 3 services and the following ports configured. Access Edge Service: 5061, Web Conferencing Edge Service: 444, A/V Edge Service: 443 with NAT enabled public
IPv4 address. I have checked the replication status between the Front End and Edge Server, it is up to date.
3. In regard to the https://lyncdiscover.domain.com, I don't have the lyncdiscover.domain.com published, but it is pointing to the NAT enabled public IPv4 address which is assigned for A/V Edge Services.
4. For the port forwarding, I am using the Cisco Meraki router.
Please advise if there are there is something that I am missing.
Thanks!

Creation of domain issues - migration from weblogic 10.3.0 to 10.3.5 versio

Hello,
i would like to kindly ask for a help with following issue:
Basically we are migrating from the 10.3.0 to the 10.3.5 version. We are building the domain using the template in "silent mode". And when i try to create the domain with new weblogic 10.3.5 im getting some errors.
The command to run the creation of the domain is following:
${WL_HOME}/common/bin/config.sh -mode=silent -silent_script=${SILENT_SCRIPT} -log=${WLLOGFILE} >> ${LOGFILE} 2>&1
returnCode=$?
SILENT_SCRIPT contains following commands:
read template from "/local/wg372/BM/appl/config/NEW_DOMAIN_CONFIGURED.jar";
write domain to "/local/wg372/BM/appl/BmDomain";
set OverwriteDomain "true";
close template;
When i setup new env(solaris) with weblogic 10.3.5 im getting following error when the silent_script command (*write domain to "/local/wg372/BM/appl/BmDomain";*) is executed:
2011-07-18 16:53:00,427 INFO [runScript] com.oracle.cie.domain.script.ScriptExecutor - succeed: read template from "/local/wg372/BM/appl/config/NEW_DOMAIN_CONFIGURED.jar"
2011-07-18 16:53:00,427 INFO [runScript] com.oracle.cie.domain.script.ScriptExecutor - write Domain to "/local/wg372/BM/appl/BmDomain"
2011-07-18 16:53:00,505 ERROR [runScript] com.oracle.cie.wizard.domain.silent.tasks.RunScriptTask - There was an error executing the script: /local/wg372/BM/appl/installer/silent_script
java.lang.NullPointerException
     at com.oracle.cie.domain.security.SecurityGenerateLDIFT.buildSecurityInfo(SecurityGenerateLDIFT.java:460)
     at com.oracle.cie.domain.security.SecurityGenerateLDIFT.<init>(SecurityGenerateLDIFT.java:119)
     at com.oracle.cie.domain.script.ScriptExecutor.writeDomain(ScriptExecutor.java:718)
     at com.oracle.cie.domain.script.ScriptParserClassic$StateMachine.processWrite(ScriptParserClassic.java:573)
     at com.oracle.cie.domain.script.ScriptParserClassic$StateMachine.execute(ScriptParserClassic.java:429)
     at com.oracle.cie.domain.script.ScriptParserClassic.parseAndRun(ScriptParserClassic.java:148)
     at com.oracle.cie.domain.script.ScriptParserClassic.doExecute(ScriptParserClassic.java:110)
     at com.oracle.cie.domain.script.ScriptParser.execute(ScriptParser.java:72)
     at com.oracle.cie.domain.script.ScriptParser.execute(ScriptParser.java:35)
     at com.oracle.cie.wizard.domain.helpers.Executor.runSilentScript(Executor.java:68)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.oracle.cie.wizard.domain.silent.tasks.RunScriptTask.runScriptWithExecutor(RunScriptTask.java:551)
     at com.oracle.cie.wizard.domain.silent.tasks.RunScriptTask.execute(RunScriptTask.java:335)
     at com.oracle.cie.wizard.silent.tasks.AbstractSilentTask.run(AbstractSilentTask.java:28)
     at java.lang.Thread.run(Thread.java:662)
In Windows env im getting following error:
create.domain:
[exec] -mode="silent" -silent_script=J:/_dev/build/installer/silent_script
[exec] << read template from "J:/_dev/build/config/NEW_DOMAIN_CONFIGURED.jar"
[exec] >> succeed: read template from "J:/_dev/build/config/NEW_DOMAIN_CONFIGURED.jar"
[exec] << write Domain to "J:/_dev/build/BmDomain"
[exec] CFGFWK-60550: Script execution aborted. The script may contain an error.
[exec] null
CFGFWK-60550: - doc says
CFGFWK-60550: Script execution aborted. The script may contain an error.
Cause:
Action:
Level: 1
Type: ERROR
Impact: Configuration
I tried to google for this issue, look into the weblogic documentation but with no luck.
So i would like to kindly ask, if anyone of you perhaps could give me a hint/advise with this problem.
Thanks in advance.

Hi,
thanks for the reply but im not sure if we are talking about the same thing. What i need is to upgrade the weblogic "DOMAIN" not the weblogic installation itself.
Anyway,
after some googling and testing im again stucked with another issue:
1. First i have created the old doman (10.3.0)
2. Then i have tested the domain with the new weblogic version 10.3.5 - as it should be (and is) compatible within those 2 versions
---> worked fine
3. Then via offline WLST(of weblogic 10.3.5) i have managed to create new template with command writeTemplate(nameOfTemplate.jar)
4. But when i try to create the new domain with the new template via WLST(of weblogic 10.3.5) im again stucked (im able to read the template in wlst but not able to writeDomain ) - error:
wls:/offline> readTemplate('/home/wg372/tmp/new_template.jar')
wls:/offline/BmDomain>writeDomain('/home/wg372/tmp/new_domain')
Error: writeDomain() failed. Do dumpStack() to see details.
wls:/offline/BmDomain>dumpStack()
com.oracle.cie.domain.script.jython.WLSTException: com.oracle.cie.domain.script.ScriptException: The application location must have write permission.
at com.oracle.cie.domain.script.jython.CommandExceptionHandler.handleException(CommandExceptionHandler.java:51)
at com.oracle.cie.domain.script.jython.WLScriptContext.handleException(WLScriptContext.java:1538)
at com.oracle.cie.domain.script.jython.WLScriptContext.writeDomain(WLScriptContext.java:803)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.python.core.PyReflectedFunction.__call__(Unknown Source)
at org.python.core.PyMethod.__call__(Unknown Source)
at org.python.core.PyObject.__call__(Unknown Source)
at org.python.core.PyInstance.invoke(Unknown Source)
at org.python.pycode._pyx3.writeDomain$15(/var/tmp/WLSTOfflineIni6651397525640719781.py:71)
at org.python.pycode._pyx3.call_function(/var/tmp/WLSTOfflineIni6651397525640719781.py)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyFunction.__call__(Unknown Source)
at org.python.pycode._pyx24.f$0(<console>:1)
at org.python.pycode._pyx24.call_function(<console>)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyCode.call(Unknown Source)
at org.python.core.Py.runCode(Unknown Source)
at org.python.core.Py.exec(Unknown Source)
at org.python.util.PythonInterpreter.exec(Unknown Source)
at org.python.util.InteractiveInterpreter.runcode(Unknown Source)
at org.python.util.InteractiveInterpreter.runsource(Unknown Source)
at org.python.util.InteractiveInterpreter.runsource(Unknown Source)
at weblogic.management.scripting.WLST.main(WLST.java:173)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at weblogic.WLST.main(WLST.java:29)
Caused by: com.oracle.cie.domain.script.ScriptException: The application location must have write permission.
at com.oracle.cie.domain.script.ScriptExecutor.writeDomain(ScriptExecutor.java:757)
at com.oracle.cie.domain.script.jython.WLScriptContext.writeDomain(WLScriptContext.java:795)
... 29 more
I tried to have a look around for the "The application location must have write permission." problem but again with no luck.
Furthemore when i try to do the same with old domain template, with old version of WLST (of weblogic 10.3.0), i have no problems with creating of the domain.
Any ideas?
Ill keep you updated :-)

Issue with login page

Hi,
Can anyone help me with the following issue: When I try logging into the login page using the URL_*(http://hostname.domainname)*_ the page is re-directed to the same URL but with https:_ in front of the URL but the login page is not displayed/shown.
But when i remove the 's' from https:_ and press enter i get the login page.Once i Login with the credentials also it is again re-directed to the https:hostname.domainame_.
Again only if i remove the 's' from (https:hostname.domainame) and press Enter do i get the responsibility page.This is happening each and every time when i click on responsibility its re-directed to https: link and i need to remove the 's' from https and press Enter to get the responsibility displayed.
Can anyone help me out with this issue.
Apps version :11.5.10.2

Do you have SSL implemented? If not, please review the application context file for any referenced to https and change it to http then run AutoConfig and bounce the services.
Also, check if any of the profile options is set to https and change it to http -- How to Search all of the Profile Options for a Specific Value [ID 282382.1]
Thanks,
Hussein

Newbie request.getParameter(String) issue

I'm having an issue setting a boolean value in a bean based off a string from request.getParameter(). I've created a small example to illustrate what I want to happen:
testForm.jsp:
<html>
<head>
    <meta http-equiv="Content-Type" content="text/html; charset=windows-1252"/>
    <title>testForm</title>
</head>
<body><form method="POST" action="testWork.jsp">
      <input type="hidden" name="hiddenTest" value="1"/>
      <input type="submit" name="submitTest" value="Submit"/>
    </form></body>
</html>testWork.jsp:
<jsp:useBean id="test" scope="session"
             class="thistestapp.testClass"/>
<html>
<head>
    <meta http-equiv="Content-Type" content="text/html; charset=windows-1252"/>
    <title>testWork</title>
</head>
<body>
<%
out.print("<p>" + request.getParameter("hiddenTest") + "</p>" );
// Great it's sending "1"
test.setTestB(request.getParameter("hiddenTest"));
//So when I set this in the bean I should get true
out.print("<p>" + test.getTestB() + "</p>" );
//False? Not nice!!
test.setTestB("1");
//Alright there must be an issue with my code in the bean, so hardcode a
//"1" in. I should still get false.
out.print("<p>" + test.getTestB() + "</p>" );
//True?? I hate you.
%>
</body>
</html>testClass.java:
package thistestapp;
public class testClass {
    private Boolean testB;
    public void setTestB(String testB) {
        if ( testB == "1"){
           this.testB = true;
        else{
           this.testB = false;
    public Boolean getTestB() {
        return testB;
}So, I want when the bean is sent a "1" from the form to set the bean value to true. I however can't get that to happen. I'm sure there's something I'm missing.
TIA.
Joe

? if ( testB == "1"){
Standard beginner's error. If you want to test if two strings contain the same text, use the equals() method. Like this:if ( testB.equals("1")){Your code tests whether the two sides of the == operator refer to the same object. It's possible and likely for two different strings to contain the same value, which is what you are really interested in.

[NEWBIE] NWDI Missing Domain Issue in Login

Similar Messages

Maybe you are looking for