Newbie photographer, question about in-camera settings and RAW

I have a Nikon D200, and I can make a wealth of in-camera settings that would greatly mitigate the amount of post-production processing that I would have to do. Nikon's own RAW Capture NX software reads these settings. I'm assuming that Aperture doesn't read (most) of them (with, perhaps, the exception of White Balance, and maybe Hue). Is there a reference somewhere of what in-camera settings are preserved by Aperture on a RAW import?
Thanks in advance,
Mark Taber

It's a pretty safe assumption that no raw editor except the OEM version will remember the in-camera settings, aside from white balance.
Why's that? Because those settings don't really do anything anyway - they are just advance instructions for the converter.

Similar Messages

Green Screen Camera Settings and other questions...

Hoping you guys can help me out :-)
I have a Sony AX2000 HD camera and am a wanna-be pro. I've been trying to perfect my green screen operation. I think I have the lighting down and can play around with PE8 green screen or chroma key effect to my satisfaction. My problem is that I am very dissatisfied with the video quality. I'm shooting at full HD 1920x1080 resolution, and although the AVCHD video that my camera creates is awesome, when I create my final product, the video is awful.
This project is for online viewing mostly, although I need to provide DVD's too. I do not need HD, but assumed shooting in HD and reducing it down MUST be better than shooting in standard DV mode. I guess I assumed wrong? (Just been reading this - http://forums.adobe.com/thread/593946?tstart=0)
I'm also wondering about my camera settings. I had everything on auto, but I read somewhere using the manual focus, and turning down the gain helps - especially with the first problem I had which was noise. Actually, I improved this some with lighting, but blacks in particular seemed "noiser" than I found acceptable...
The other problem I have is fast movement. If my subject is throwing their arms around at any decent pace, even creating a high definition MPEG give me some terrible motion blur... then I realized even just creating a HD MPEG of the original video without the chromakey effect gives me sub standard quality, compared to the original AVCHD file. After searching this forum, I think I might have found the problem. I need to check my project settings to make sure they match the source files... I'll post again once I've tried this and let you guys know if it works...
Any other tips/thoughts out there?

OK - I discovered today that I was in fact using the wrong presets in Premier Elements. Rectifying that little detail gave me MUCH improved ouput - both for the MPEGS and even the standard DVD (although it still has the "home made" look to it rather than the TV clarity I would expect, it's a million times better than what I had).
Now I understand the basics of presets, I also discovered I wasn't using the best my camera had to offer either. I had it set to HD 1080 60i HQ – I found out the HQ translates to approx 9mbps (when this can be increased to 24mbps by using the FX option) - also the HQ was also giving me 1440x1080 resolution (when the FX could take me up to 1920x1080). So, I'm hoping for even better results tomorrow.
So, here are todays questions:
1.) The 60i part of the preset. Presumably the higher the frame rate the better, but how about the progressive v. interlacing - ie. is one better than the other for chroma key? Or does the fact that I'm going to be using this for web viewing (F4V format) and DVD's affect this decision?
2.) I took Steve's advice and downloaded Premier Pro. Immediately I came up against a problem. It seems like I don't have a suitable preset to choose. Further, when I tried to import my files directly from the camera's memory stick, it said they weren't supported. Adobe say the trial version is without limits, so any idea what the problem is here?

HT201263 What will i do?screenshot There is a problem with your iPhone. Please visit the Service Answer Center to find answers to all your questions about service options, warranty and other processes in your country. To find your nearest Apple Store, cli

What will i do? ITune screenshot is as follows >
There is a problem with your iPhone. Please visit the Service Answer Center to find answers to all your questions about service options, warranty and other processes in your country. To find your nearest Apple Store, click here.

Do what it said to do.
"Please visit the Service Answer Center to find answers to all your questions about service options, warranty and other processes in your country. "

TS1814 There is a problem with your iPhone. Please visit the Service Answer Center to find answers to all your questions about service options, warranty and other processes in your country. To find your nearest Apple Store, click here.

There is a problem with your iPhone.
Please visit the Service Answer Center to find answers to all your questions about service options, warranty and other processes in your country.
To find your nearest Apple Store, click here.
Please help me i can aktivate my phone imei 012423006333181.

There is a problem with your iPhone.
Please visit the Service Answer Center to find answers to all your questions about service options, warranty and other processes in your country.
To find your nearest Apple Store
no imei also

Questions about JVC GZ HD7 and Final Cut

i'm planning to buy a JVC GZ HD7, but i have some questions about it...
My imac configuration is
Imac 20" late 2006
1 Gb Ram
Leopard 10.5.2
Final Cut Studio 2
Ok
So my questions are:
1- When shooting the best setting for me is the 1440cbr, or 1920x1080
is better? i would like to have progressive instead of interlaced
moviefiles, but for what i have read the JVC HD7 only shoots interlaced...is possible to turn them into progressive after working in final cut?
2- In Final Cut Pro what are the sequence settings and the video
settings for a video shoot from this camera?
I would like to know the best settings possible for me,
regarding that i would like to edit in real time, no rendering needed,
and to have the best image quality that this camera can offer...

FCE is designed to work with DV/HDV files. It cannot work natively with MPEG2 files. You will need something like MPEG Streamclip to convert your files to a format that FCE understands
Streamclip is free but you need to buy Apple's MPEG Playback Component to make it work

Camera Settings and Printing -off topic

Hi Everyone;
My teenage cousin is going on a trip to Europe for a few weeks and she will be taking alot of digital pictures with her Canon point & shoot camera ( 5 MP SD30), but will not be able to unload her images from the SD card. She already has Three Cards totaling 1.5 GBs and does not want to buy more.
So in order to increase the number images the card will hold, do you recommend lowering the resolution OR lowering the image quality by increasing the JPEG compression in the camera settings, for the purposes of printing ? ( obviously not all her images, but she may want to have some for her school yearbook, friends etc ).
This is a question I have asked myself with my own digital cameras, over the years, if i have to shoot JPEG i usually have the settings to MAX resolution and Lowest compression, in case i want to print some.
Also what would you recommend as the lowest resolution setting (in general, with any camera) if you want to print the following sizes?
4 X 6
5 X 7
8 X 10 or US Letter
Thanks in advance, and i realize this is a little off topic.
Robert
Powermac G5 Dual 2.7Ghz, 4GB, X800, WD "Raptor" 74 GB 10K boot, 3.5 TB FW 800 Mac OS X (10.4.5) My first Computer was an Apple IIc !!

You could purchase an iPod along with the iPod Photo Connector to download the images for storage.
http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/70203/wo/oG40TPj AzNzm2xaoa3A25wLSBVg/2.SLID?mco=55EFC253&nplm=M9861G%2FA
Epson also makes two such a devices.
http://www.epson.com/cgi-bin/Store/consumer/consDetail.jsp?BV_UseBVCookie=yes&oi d=49164278
http://www.epson.com/cgi-bin/Store/consumer/consDetail.jsp?BV_UseBVCookie=yes&oi d=61555441
PowerMac G5 Quad 2.5Ghz Mac OS X (10.4.5) 4.5GB RAM, Nvidia 7800 GT, 600GB RAID

Techie Question about iWeb, outbound links, and Google Analytics

Hi,
I have a kind of pretty technical question about using Google Analytics (GA) with iWeb sites to measure clicks on outbound links. Here's the setup:
1) My website's online, and GA is working properly.
2) I don't sell stuff directly, but I do have a "Purchase" page which contains a link to a specific Amazon page.
3) I'm pretty sure I can measure how many people go to the Purchase page using GA, but how do I measure whether visitors click on the Amazon link? It would be interesting to me to be able to gauge what the conversion rate is; that is, how many people actually proceed to purchase the product at Amazon.
I've checked the GA instructions and there's a page about manually tracking clicks on outbound links but it requires some code inputting. I know zero about coding, but I'm pretty sure that in iWeb you can't get access to the source code to input the required code.
Am I wrong about this? And if I am, then does anyone here know how to measure the clickthrough rate?
Anyway, hope you can help. Thanks in advance.

I don't know about the link tracking but you could have the link take you to a redirect page which automatically sends them to Amazon.com after a preset time, 0 seconds to whatever you'd like. You can put a counter on that redirect page, like StatCounter. StatCounter can tell you how many, from where they came, i.e country and area, repeat visits, etc.
Tutorials #12 & #13 describe how to put a visible counter on a page but with a redirect page you wouldn't have to bother since it wouldn't be seen. You can get all of your information from your account on the StatCounter site.
The redirect page would be a simple plain text page titled redirect.html and would look like this:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
"http://www.w3.org/TR/html4/loose.dtd">
<html>
<head>
<meta http-equiv="refresh"
content="0; Destination URL">
<title>Redirecting or whatever you'd like to appear at the top of the browser</title>
</head>
<body>
</body>
</html>
0 Is the number of seconds to wait before redirecting the visitor. If set to zero the visitor would not know they were being redirected. Replace Destination URL with the Amazon URL you want them to go to.
OT

Question about Movie Rental Times and AirPlay

Just wondering. I have been sitting with my Apple TV2 since I got it this morning with it saying to download an hd movie. 1920 minutes remaining.I can get a faster download off my computer so that comes to my second question. Can I rent it on my computer and airplay it to my Apple TV?
Oh and my network speed is 3mbs. Not alot I know... But is that ok?

Are either of you using a DNS server / name server other than the one provided by your Internet service provider? OpenDNS or Google's DNS service, for instance? (If you don't know what I'm talking about, probably not.) There have been a number of reports suggesting that this can result in slow media downloads due to the way the movie servers try to optimize delivery based on your location, though it's unclear to me how accurate this really is.
Also, be aware that by default, the new Apple TVs provide "hi-def" rentals from the iTunes store (this is not applicable to Netflix), which means a larger and therefore longer download. To rent standard definition, you have to go into Settings and switch rentals to standard definition.

Some questions about Unity 4.0 and IPC

I have a couple of questions and I was looking for "real world" answers, not specific answers from the design guide.
1.What is this bandwidth requirement between Exchange and Unity and what is it used for?
2. What sort of issues would we experience if we placed the Unity UM Server at the Colo and placed the Exchange server at the customer premise; with a single T1 between the sites?
3.What else is involved with a Unity UM install vs. a Unity VM install?
4.Does the Unity UM and Exchange servers have to be running AD?
5. Can Unity or the Exchange box be the Domain Controller? Or does it need to be a separate server?
6. Where does a vm message get streamed from? The Unity server or the Exchange server?

No you do not pay for FaceTime. It uses your WiFi network, so if you have access to WiFi it is free.
There is no server required for FaceTime, it will use a direct device to device protocol.
I can't answer the question about using phones in different countries as that will depend on if you buy a phone that is locked to a carrier.
If you buy a phone in Germany and it is locked to a German phone network then it will most likely not work with a SIM from Turkey. You would need to buy an unlocked phone which are very expensive as they do not have any carrier subsidy applied to the price.

Newbie Flex Question about ComboBox in DataGrid

Heya!
Just downloaded Flex today and pleasantly surprised at how
cool it is. Can any of you fine gents and girls help me out? Why
doesn't this give me an editable column in my data grid?

It's a pretty safe assumption that no raw editor except the OEM version will remember the in-camera settings, aside from white balance.
Why's that? Because those settings don't really do anything anyway - they are just advance instructions for the converter.

Question about using 10g/11g and APEX ...

Hi,
I just recently learned of Oracle's APEX and have a few questions about using it.
Can I use APEX with express, standard, and enterprise editions of 10g and 11g?
Are all of these free to use?

You might want to read about APEX rather than jumping into questions that are reasonably well documented. Info at http://www.oracle.com/technology/products/database/application_express/index.html
Your specific questions:
1) Apex is a package that can be installed into any properly licensed database.
2) The price for the production license of the database varies by edition.
The price for Express Edition is $0 for use in production. Part of the cost for that edition is 'no Oracle Support based support, no patches, data volume limitation, etc.'

I just have questions about the AirPort Express and how it works.

My household Wi-Fi is not the strongest in my room and I found out about the AirPort Express and I read the overvie, but I still have some questions on how it works, how its setup and other questions as well.

The AirPort Express will not wirelessly extend the signal from another router unless that router is also an Apple product.
Not sure what other questions you might have, but we'll try to answer if you want to ask.

Question about suitability of iPhone and specific comparisons

I like the Verizon network (for which I'm considering upgrading to the Omnia II) but am thinking about biting the bullet and going to AT&T for the iPhone. I use Macs at home and at work. My main uses will be phonecalls (with reliable voice dialing from my car - bluetooth stereo and earpiece), mail (Exchange server access for calendar, mail, and addressbook), internet through the cellphone network (not wifi) - browsing, SFTP, VNC, etc., watching videos, photos, and listening to music, calendar reminders (as well as periodic sound reminders for missed calls, voicemails, etc.), opening PDF and Word documents, GPS (ideally with spoken driving directions),and Skype. Given these uses, can anyone advise me if there's anything here that is a problem for the iPhone?
thanks,
Mike

"VNC"
There are pretty nice VNC clients for the platform, the best being Jaadu VNC. (See my just-published "Everything you will ever want to know about the remote desktop controllers on the iPhone" for more info if interested; it's been cross-posted to several iPhone forums. Not this one - yet - as I still don't have Level 1.)
watching videos
The 3G S (but not the 3G!) is far better than current for example Windows Mobile or Symbian phones in that it can play back MPEG-4 / H.264 videos without excessive power consumption. That is, if all your videos are in this format, the 3G S is the way to go.
Nevertheless, if your videos are in DivX, XviD or - even worse - WMV, you won't be able to natively play them back - you'll need to transcode them first.
This, unfortunately, also means WMV streaming TV stations are far harder to watch than on, say, Windows Mobile. The only AppStore app ("Streamer") supporting them is really bad and delivers dismal performance, even on the 3G S.

(newbie) Question about replacing .class files and web.xml file

I'm new to servlets and I have two quick questions...
Do I absolutely need a web.xml file to define all my servlets, or can I simply place .class files into the WEB-INF directory and expect them to run?
If my application server (for example Tomcat) is running and I replace a servlet .class file, do I need to restart the server for the new .class file to take effect?
...or are both of these questions specific to the application server I'm using?

Hi,
From an article I read:
With Tomcat 3.x, by default servlet container was set up to allow invoking a servet through a common mapping under the /servlet/ directory.
A servlet could be accessed by simply using an url like this one:
http://[domain]:[port]/[context]/servlet/[servlet full qualified name].
The mapping was set inside the web application descriptor (web.xml), located under $TOMCAT_HOME/conf.
With Tomcat 4.x the Jakarta developers have decided to stop allowing this by default. The <servlet-mapping> tag that sets this mapping up, has been commented inside the default web application descriptor (web.xml), located under $CATALINA_HOME/conf:


A developer can simply map all the servlet inside the web application descriptor of its own web application (that is highly suggested), or simply uncomment that mapping (that is highly discouraged).
It is important to notice that the /servlet/ isn't part of Servlet 2.3 specifications so there are no guarantee that the container will support that. So, if the developer decides to uncomment that mapping, the application will loose portabiliy.
And declangallagher, I will use caution in future :-)

Newbie question about Oracle Parallel Server and Real Application Cluster

I am trying to find out what kind of storage system is supported by the 9i Real Applicaton cluster. I have looked at the 8i Oracle Parallel Server which requires raw partitions and therefore NAS (network attached storage) that provides an interface at the file level will not work. Does anyone know if the 9i Real Application cluster has a similar requirement for raw partitions? any suggestions of whether SAN or other technology will be suitable? pointers to more information is appreciated.
Robert

Hi Derik,
I know this is a really broad question. No, it happens all the time! Here is a similar issue:
http://blog.tuningknife.com/2008/09/26/oracle-11g-performance-issue/
+"In the end, nothing I tried could dissuade 11g from emitting the “PARSING IN CURSOR #d+” message for each insert statement. I filed a service request with Oracle Support on this issue and they ultimately referred the issue to development as a bug. Note that Support couldn’t reproduce the slowness I was seeing, but their trace files did reflect the parsing messages I observed."+
I would:
1 - Start by examining historical SQL execution plans (stats$sql_plan or dba_hist_sql_plan). Try to isolate the exact nature of the decreased performance.
Are different indexes being used? Are you geting more full-table scans?
2 - Migrate-in your old 10g CBO statistics
3 - Confirm that all init.ora parms are identical
4 - Drill into each SQL with a different execution plan . . .
Raid 5 Don't believe that crap that all RAID-5 is evil. . . .
http://www.dba-oracle.com/t_raid5_acceptable_oracle.htm
But at the same time, consider using the Oracle standard, RAID-10 . . .
Hope this helps . . .
Donald K. Burleson
Oracle Press author
Author of "Oracle Tuning: The Definitive Reference"
http://www.rampant-books.com/t_oracle_tuning_book.htm
"Time flies like an arrow; Fruit flies like a banana".

Newbie photographer, question about in-camera settings and RAW

Similar Messages

Maybe you are looking for