Newbie - Please Be Gentle!
Hi, iTunes recently accepted my vodcasts for listing. I got an url that takes me to it, but I cannot find it under the appropriate category. Is this because iTunes has too much stuff to possible list it all and should I just use the url to let potential viewers know it exists?
Thanks.
Did you add the itunes:category and itunes:keywords tags to your feed?
Similar Messages
-
Help !! - Cant install OS - Newb, please be gentle...
Hey all, I've just bought my first Mac - a nice shiny grey G4..(ok its not new.. but it'll do for the moment :-))
anyway, unpacked it, plugged it in, slipped in my new OSX CD (10.4 Tiger) and tried to install the OS (The machine shipped with a 10GB "cleaned" HDD)
I'm unsure about any of the conditions of the internals - at this stage I canot even troubleshoot them ....
BUT, I usually get as far as the install section of the CD menu, but if i go to change the HDD options (ie, mark it for deletion) it freezes ....
if I let it continue without changing the HDD parameters it usually gets to the "preparing for installation" section then freezes...
If i do a custom istall, it usually freezes after deselecting the printers and languages ....
any pointers ?
I can replace the HDD (but need to know the reccomended Jumper settings... nothing I do seems to work)
I WILL Zap the PRAM on the next try
am having some extra PC100/133 RAM delivered in the next few days . . .
Help ?
JThe RAM that you need should be as follows:
PC133 CL3 3-2-2/PC100 CL2 2-2-2 168 Pin SDRAM DIMM
Also, read this:
http://docs.info.apple.com/article.html?artnum=58426
Note that PC133 RAM is backwards compatible.
I believe the ECC is "error correcting" for PC machines.
With regard to the hard drives- the Seagate iV ata drives should be okay- Are they formatted, and how? If not formatted, before running set up on the install disk, go to the menu bar, pull options, and select Disk Utility. Disk utility will start up and you should find and be able to format (HFS+/Journaled).
Also, are you connecting them (Seagates) over the 10 gb drive,(as a slave) or, in replacement of (as a master)?
Please see this:
http://docs.info.apple.com/article.html?artnum=31292
Make sure the end ribbon connector is plugged to the master drive, middle is for slave (second drive).
How are the jumpers set? Check this:
http://www.seagate.com/ww/v/index.jsp?locale=en-US&name=ATAJumperSettings&vgnextoid=cbc974850ce0e010VgnVCM100000dd04090aRCRD
One more note- Please do things one at a time. First get drive recognition, second get OS installed, then try replacing RAM, etc. Don't want problems masked by other problems.
Let me know-
Chris
G4 AGP(450)Sawtooth Mac OS X (10.4.8) 2ghzPPC,1.62gbSDRAM, ATI9000, DVR-110D,(IntHD)120&160,LaCie160,23"Cinema Display -
I'm a newbie, please be gentle with me...
My wife and I have been designing websites for almost 10
years. As fate would have it, we learned on Frontpage, and have
always used it as the 'base' foundation to build sites with. We
currently host/maintain approx. 10 sites, and now realize it may be
of greater benefit to swith to Dreamweaver. A friend gave us a
computer loaded with amazing software, and now we are faced with
the challenge of re-learning. This machine has Dreamweaver CS3
(along with the entire Adobe Design Premium CS3)
Questios: 1. Do I need to 'convert' the sites in order for
them to work properly once I edit them with DW?
2. Will I need to completely re-organize the site, or will
DW take care of that?
If anyone has done this, or can offer advice, it would be
greatly appreciated... and thanks in advance!Are you *SURE* you are not using shared borders, or FP
navigation elements,
or FP form processing, or FP guestbooks?
If you are, then you can just begin using DW on your site.
Before doing anything else, take a couple of weeks to
gothrough the DW
tutorials, and also to study HTML and CSS. The more you know
about those,
the easier your transition will be. DW expects alot more from
you than FP
did, and as a result, you may find it much more frustrating
to have the raw
reality of web development staring you in the face rather
than the wizards
of FP.
> Is there a way to convert a Frontpage site into a
> Dreamweaver site
1. I'd define a Dreamweaver site that points to a location on
your hard
drive for the local site's root, and to the current FP site
on the web as
the remote site
2. I'd use Dreamweaver (if your host supports FTP
connections) to download
the remote site to the root of the site you just defined on
the hard drive.
This will pick up all the pages *after* webbot action so that
shared borders
and all are already present in the page HTML. This will also
pick up all of
the server scripting. Note - in the event that you are not
able to connect
using FTP since some FP hosts block that protocol, you will
have to use a
third party 'site copier' like Black Widow, QuadSucker, or
WebCopier, (or
even the DW extension called SiteAssist from WebAssist) to
connect and
download using http protocols. Doing it this way will *not*
retrieve any of
your server-script code, if any (unless you have used the
WebAssist
extension).
3. I'd create a DW template for the pages, that captures the
"shared
border"
effect you had in FP.
4. I'd copy and paste content from each FP pages to a new
template child
page and then save the new child page with an easily
identifiable
nomenclature that is distinct from what was used on the FP
site (since you
are saving the new child pages into the same local site as
the FP pages).
5. When the basic site is completed, I'd upload the new DW
pages to some
staging area/webspace, and by using the browser, I'd verify
that the site
(as it now exists remotely) is complete.
6. Then I'd create a *new* DW site in a new location on the
hard drive, and
connect to and download all the files from the staging site.
7. You can now delete the original FP site from your local
system if you
want.
You now have a complete site (minus any of the FP extension
server-side
code) that has no FP footprint.
If you have used any FP server extension functions on the
original FP site
(form processing, guestbooks, tables of contents, etc.), you
will have to
recreate those functions in DW using 3rd party scripts, or
scripts that you
write yourself.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"masterstar" <[email protected]> wrote in
message
news:[email protected]...
>I think the only reason the FP extensions have been
necessary is so we can
> upload files to the site (rather than using FTP) which
is becoming a
> problem.
> So, I had this curious thought: Is it possible to work
on an active site
> with
> both FP and DW?
> -
!! Please be gentle...
I'm only a newborn programmer !! Please be gentle with me !
What I really want to know is this : Is there any reason at all that it would be benificial to use C++ rather than Java? There must be a reason why C++ is still so popular..I'm only a newborn programmer !! Please be gentle
with me !
What I really want to know is this : Is there any
reason at all that it would be benificial to use C++
rather than Java? There must be a reason why C++ is
still so popular..COBOL is still pretty popular; so is FORTRAN. C hasn't disappeared.
If that's your criterion, better stay away from Java.
The right tool for the job is a great answer.
I can think of one reason why you might prefer Java to C++: last time I looked, C++ didn't have the extensive library support that Java does. I had to buy RogueWave for database connectivity, etc. JDBC comes right in the Java box.
I will admit that I haven't kept up with the open source support for C++. It might match Java's, but I can't imagine that it exceeds what's available for Java.
% -
Editing Help for a newbie.....Please be gentle..
I am new to Photoshop CS3, in fact, new to photoshop entirely. I have been using MS Digital Image Pro and up until now it has worked for me.
Here is my problem. I take a lot of pictures of coins. Sometimes I have to tilt the coin slightly to get a good rendition of the color. So at time the image is slightly oval.
I can not figure out how to use a tool to outline the coin, cut it (or copy) and paste to another project. The part that I can't figure out is adjusting the circle marquee tool to the perimeter of the coin.
Thank you for any help.OK, then...so my suggestion about scanning the coins is so worthless to you that it's not even worth commenting about?
If so, so be it. I don't necessarily live and die by having my suggestions validated. Acknowledgment is kind of nice to see, though.
If you insist on your current workflow, maybe you'd like to know this little trick:
As you click-and-drag out an elliptical marquee, you're going to try to be pretty close to properly surrounding your coin, right? Well, before you let up on your mouse button to commit to the elliptical "marching ants" selection area, press and hold your space bar. This will allow you to drag your current marquee around the document window. Move it so it's closer to accurately surrounding your coin, then let up on the space barKEEPING YOUR MOUSE BUTTON DEPRESSEDand you can continue to resize the marquee. If you get close, but not exact (maybe your hand gets tired; I know mine does occasionally when doing this), go ahead and commit to the selection. Then you can use the Transform Selection function to fine tune it.
Now, having said that, and knowing that you've remarked that you'll be doing a lot of this type of photography, it would seem to me that your efforts would be better served by figuring out a way to properly shoot the coins so that the circular distortion you have to correct for is eliminated. Since you say the reason you have to tilt the coins is to get a better capture of the color, my guess is that you need to focus your efforts on a better lighting scheme. Get the light correct, and you'll be able to shoot the coins straight-on, eliminating the circular distortion, and a whole lot of repetitive, finicky work in Photoshop.
Invest the time, effort and experimentation up front, for dividends that will pay off later with every coin image you do. -
Hi,,,im a newbie so be gentle with me...lol
hi,,, im a newbie,,,be gentle with me...lol
okay.. welcome to the forum
this is a good example of why ....
a) the forum should be a place where posters of questions and problems are answered by " paid " adobe employees...
Not necessarily with the understanding that the solutions or answers by the paid employees of adobe in the forum will be definitive and absolute, but that every effort is made to help the poster. It ( the forum ) would rise up from the level of " users helping users " to " users being helped by those who have passed the certification requirements to represent " forum " helpers... employed by adobe.
That changes the whole social and technical aspect of the ' users helping users' forum as we now know it...
why ?
Because , those who post on the forum must have a serial number and version number of their software BEFORE they can post a question in the forums. That information ( version number and serial number ) gives the forum the info they need to focus on the problem posted.
If the poster ( with serial number and version number a requisite of posting ) asks 3 really stupid questions or makes some really stupid post they automatically lose their ability to post any more on the forum. Then ( after they lose that right , they have to call the telephone numbers where people ask them questions to support them via India and so on ).
Meantime, those idiots who spend their time 'helping others ' for nothing over the years finally get a break and make about $ 2. 00 per hour aggravate for the time and skill and talent and intelligence they contribute to the " forums".. as proved by their MVP status etc.
how cool is THAT idea ? it becomes " users helping users " but the helpers are rewarded ( maybe less money for Jim Simon due to his prolific involvement ? - he will answer almost anything just to have something to say ) and the posters get weeded out as needed depending on their sincerity and need .??? -
I am newbie, please advise.
Hi All,
I am a newbie and wish to learn oracle thick and past. I joined the oracle training and wish to make early inroads in this era , I also like to tell you that I am not as great in computing word and also not good in oracle. Now please advise me, how should I approch ? I would rank your help as million dollor help to me.
Cheers
AmitI often feel "thick and past" these days...
I also like to tell you that I am not as great in computing word and also not good in oracle. So what is it that draws you to learn Oracle?
The first thing you should read is this blog posting from top notch Oracle expert Tom Kyte. This will explain the mind-set you need in order to make progress. Then start with the downloading of Oracle and reading the documentation as my colleagues have advised.
Another good source for beginners is Lisa Dobson's Oracle Newbies Blog (skip the latest posting and check out some of the earlier stuff).
Cheers, APC -
NEWBIES Please Read. Update Information.
Hi all,
There's links shoved all over this site regarding files that will hopefully help others get their systems in working order.
I thought I would eliminated the leg work for newbies and those too lazy to search and post links to many important/vital files that may aid users in making the most out of their MSI experience, even if the BIOS is a pain in the arse. :D
875P BIOS Files
http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=434
865P/PE BIOS Files
http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=433
Intel Chipset inf Installation Utility 5.02
http://downloadfinder.intel.com/scripts-df/filter_results.asp?strOSs=44&strTypes=DRV%2CARC&ProductID=816&OSFullName=Windows*+XP+Professional&submit=Go%21
Intel IAA RAID Edition 3.5
http://downloadfinder.intel.com/scripts-df/filter_results.asp?strOSs=44&strTypes=DRV%
2CUTL&ProductID=961&OSFullName=Windows*+XP+Professional&submit=Go%21
ATi Radeon Catalyst 3.6 Drivers
http://www.atitech.com/support/drivers/winxp/radeonwdm-xp.html?type=xp&prodType=graphic&prod=productsXPdriver&submit.x=6&submit.y=1
Nvidia Detonator Drivers 45.23
http://www.nvidia.com/object/winxp-2k_45.23
Blaster Worm Patch
http://www.microsoft.com/downloads/details.aspx?FamilyId=2354406C-C5B6-44AC-9532-3DE40F69C074&displaylang=en
Windows XP SP1a REDIST (Entire)
https://www.microsoft.com/windowsxp/pro/downloads/servicepacks/sp1/sp1lang.asp
DirectX 9.0a REDIST (Entire)
http://www.microsoft.com/downloads/details.aspx?FamilyId=A6DEE0DB-DCCE-43EA-87BB-7C7E1FD1EAA2&displaylang=en
On-Board Network Drivers
http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_list.php?part=1&kind=2&CHIP=2&ID=1
On-Board Sound Drivers
http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_list.php?part=1&kind=3&CHIP=3&ID=1
On-Board IDE Drivers
http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_list.php?part=1&kind=4&CHIP=4&ID=1
Best of Luck,
MR BREEZE
P4 3.0G 800FSB @ 3.45 G/230(924)FSB
MSI 875P Neo FIS2R Bios v1.74b
Kingston HyperX3500 1GB Dual DDR433
ATi Radeon 9800 Pro 128MB @ 441/371
WD1200JB Primary Drive
Pioneer DVR-105 (unlocked firmware 1.33b)
2xWD2000JB on IDE in RAID-0
Antec TrueControl 550
Sandra MAX3! CPU: 11696
Sandra MAX3! Mem: 5565
Sandra MAX3! HDD: 49500
HDTach 2.61: 64MB/sec Avg. 80MB/sec Max. 36MB/sec Min.
3dMark2001SE: 20995
3dMark2003: 6848
Maesus : I edit this post with other users' great inputs.
Below is by Petej61
System Information / Benchmarking links:-
AIDA32
http://www.aida32.hu/aida32.php
ClockGen
http://www.cpuid.com/clockgen.php
CPU-Z
http://www.cpuid.com/cpuz.php
Sisoft SANDRA
http://www.sisoftware.net/
Other usefully progys (All links have Free downloadable versions):-
Adobe Acrobat reader (Needed to read PDF files)
http://www.adobe.com/products/acrobat/readstep2.html
AD-Aware (Removes tracking cookies/spyware)
http://www.lavasoft.nu/
AVG Anti-Virus
http://www.grisoft.com/us/us_dwnl_free.php
DAP (Download accelerator/resumer)
http://speedbit.com/DAPDL.asp?
SUN JAVA (Needed to run some web-based programs)
http://www.java.com/en/index.jsp
ZoneAlarm (Firewall)
http://www.zonelabs.com/store/content/home.jsp
by KingFisher
Hi,
I hope the following may help. :]
ATI CATALYST 3.7 (Windows XP):
http://www.ati.com/support/drivers/winxp/radeonwdm-xp.html?type=xp&prodType=graphic&prod=productsXPdriver&submit.x=2&submit.y=6
CD Speed 2000 (contain softwares that can test your CD-ROM and DVD-ROM):
http://www.cdspeed2000.com/
Futuremark (included products like 3DMark®03 Pro and 3DMark2001 SE Pro):
http://www.futuremark.com/products/
Intel® Processor Frequency ID Utility:
http://support.intel.com/support/processors/tools/frequencyid/
Winzip:
http://www.winzip.com/ddchomea.htm
Thank you for your attention.i posted this in another new thread https://forum-en.msi.com/index.php?threadid=34871&sid= but might as well ask here too....
Okie dokie, I'm new here, and I've been pouring through threads for the past 2-3 hours and doing searches, so please excuse these questions if they seem to have already been answered, but I would like to just ask a few (hopefully susinct) questions to get the quickest and most direct answers possible...
I just bought the 865pe-LS board, p-4 2.6ghz 800FSB HT CPU, and value-select Corsair PC3200 512MB dual-channel kit, and it has become apparent that there is or has been a HUGE problem with this board accepting corsiar memory. ARGH or should is say DOH for not checking into all of this BEFOREHAND!
But it seems that several bios versions have come out since the majority of those threads I have been reading about back in august. Sooo, can anyone tell me if the current version, 1.9 bios, has fixed these incompatibilities with the corsairs memory sticks? I realize that most people are going the LL version routes for the memory, and I have opted for the value-select versions...but it still seems to be a possible dilemma. I am wondering if it is worth it to try to pay the 15% restock fee or sell it on ebay (hopefully for about what I paid) and go get the same stuff in kingston memory instead, since these seem to be much more compatible? Or has this problem been fixed with newer bios versions?
Another important factor to consider, I think, is that I may not be THAT interested in overclocking much of anything, but perhaps just wishing to use the fast or turbo modes, probably not ultra-turbo since i would need the XMS or hyper-X versions to even try this. If the bios is now accepting corsair, I am trying to figure out, short of "experimenting" since i have not gotten all of my components in yet, if its even possible or recommended to overclock or use the fast/turbo mode with the cas-3 value select dual-channel setup I will be using...any clues?
Lastly, which may have been already answered by now, is it best to use the PAT or DOT settings or opt for manual setting for any sort of higher-performance setup, considering my specs for my soon-to-be new computer? Or does it really make THAT much difference? Im not into squeezing out every nano-second of speed, but if a little tweaking would make a BIG difference and wouldnt require me spending MANY hours or days to do so, then I'm all for it. I'm practically a noob at this stuff, only really educating myself in any depth about all this stuff tonight (going off of what outhers have recommended in making these purchases)...thanks for the understanding and the help in advance!
*looking for any help*
is how i feel, haha...*sigh* -
Questions from a Newbie - Please Help by Responding
Okay, I just received a new iPod (30GB, black) as a gift and have a few questions.
I apologize in advance for any repeat in them (with respect to being answered in other posts), but I am confused and have a headache from trying to read all of the links provided in responses, etc. I just want to understand procedures is all. I know the questions may seem trivial, but I am a complete newbie at this iPod thing.
(1.) Could someone please explain the entire authorization/deauthorization details to me with respect to iTunes and various computers.
Specifically, if I download a song from the iTunes store on my desktop, how do I get that same file on my laptop and then authorize my laptop to play the song? From what I gathered in reading, I have to authorize my laptop to play the iTunes song downloaded on my desktop, but I do not understand how I transfer the song to the other computer's iTune software?
Do I burn files to a CD, disk, etc. and then transfer via that method and then authorize the songs in iTunes, so that the songs are in both places (desktop and laptop)? Could someone give me step-by-step instructions on this, or link to somewhere that does?
(2.) Could I have different songs on my desktop versus laptop, connect my iPod to one or the other, and send the songs to the iPod? From what I read, I believe the answer to this is yes (I believe I am permitted to connect my iPod to up to 5 different computers to load music from iTunes?).
Should I do this, do I need to authorize anything or just connect my iPod to the computer?
Thank you in advance for any response(s) offered.
Again, I apologize for reposting these questions, but I am having a hard time pulling everything together into a succinct answer I can follow.
Sincerely,
wkkunkle
Windows XP ProWelcome to Apple Discussions!
1) There are many options. Here are some of them...
iTunes: How to copy music between authorized computers
Once the file is on your laptop, just play it in iTunes. iTunes will ask you for your iTunes Music Store account information and then authorize your computer.
2) This is what you have to do...
Using iPod with multiple computers
Authorizing is really only for the music store and purchased songs, not for iPods and which computers they connect to.
btabz -
Newbie, Please help, How do I add CDATA to exsting xml flash asset
Hi, I am a front end web designer/developer and
analyst...struggling with putting an accordian flash xml menu
together. I have it done except I need to add a simple trademark
symbol circle with r. I am struggling with how to do this since I
am not savvy in actioncript. I assume the best way is to add it is
with a CDATA child node, but do not know how or whatever is the
best way to get this done since am on a tight deadline. I need
someone to explain step by step what I have to do to get this
simple addition resolved. Attached are the links to home page and
code for the xml file. The left navigation is the asset that I need
to add the trademark symbol under about, about ADHERE. Thanks so
much in advance!!!!!!
[URL=http://www.nodcreative.com/natrecor_sliced/natrecor_index.html]index
page with flash xml menu asset[/URL]
xml code:
<?xml version="1.0" encoding="UTF-8"?>
<accodion>
<item name="HOME">
</item>
<item name="ABOUT">
<item name= "ABOUT
ADHERE<![CDATA[write]]>"></item>
<item name="Medical Information" url="
http://www.jnj.com?ref=Random">
</item>
<item name="About SCIOS" url="
http://www.jnj.com?ref=Random">
</item>
</item>
<item name="INTERACTIVE DOSING INFORMATION">
<item name="Indications and Usage" url="
http://www.jnj.com?ref=Random"></item>
<item name="Contraindications" url="
http://www.jnj.com?ref=Random"></item>
<item name="Warnings" url="
http://www.jnj.com?ref=Random"></item>
<item name="Dosage and Administration" url="
http://www.jnj.com?ref=Random"></item>
</item>
<item name="RESOURCES AND TOOLS">
<item name="NATRECOR PI" url="
http://www.jnj.com?ref=Random"></item>
<item name="About Heart Failure" url="
http://www.jnj.com?ref=Random"></item>
<item name="Stages of Heart Failure" url="
http://www.jnj.com?ref=Random"></item>
<item name="NATRECOR Dosing Information" url="
http://www.jnj.com?ref=Random"></item>
<item name="Patient Management Resources" url="
http://www.jnj.com?ref=Random"></item>
</item>
<item name="US PRESCRIBING INFORMATION">
</item>
<item name="IMPORTANT SAFETY INFORMATION
ref=http://www.jnj.com">
</item>
<item name="REGISTRATION ref=http://www.jnj.com">
</item>
</accodion>
FLASH actionscript is as follows:
// The accordion
var accordion = this
// The item list
var itemList = []
// SETTINGS
//-------------PROPERTIES----------------
// Separation between the buttons
var separation = 1.5
// Tabulation between the buttons and the margin
var tabulation = 10
// if true, it cant be more than one items opened at the same
time (only for the first buttons, POWERFUL, MENU ,ACCORDION, ets).
var autoClose = true
// if true, it cant be more than one subItems opened at the
same time.
var subItemAutoClose = true
// if true, open and close all the subItems at the same time.
var openAll = false
// The height of the button
var itemHeight = 21
// The width of the button
var itemWidth = 230
// If true, show the light over the button
var light = true
// The ease of the menu opening
var openEase = 2.5
// The ease of the menu closing
var closeEase = 2.5
// The rollOut color fade speed
var rollOutFade = 8
//-------------COLORS----------------
// The color of the button
var buttonColor = 0xa
// The roll over color
var rollOverColor = 0xCCCCCC
// The arrow color
var arrowColor = 0xCCCCCC
// The arrow color on roll over
var rollOverArrowColor = 0x000000
// The text color
var TextColor = 0xFFFFFF
// The text color on roll over
var rollOverText = 0x000000
// LOADING XML
// The xml data
var xmlSource:XML = new XML
// Loading the xml
xmlSource.onLoad = function(success:Boolean):Void {
// When the load finishs...
if (success) {
// The first node of the xml
xmlRoot = xmlSource.firstChild
// The item nodes
xmlItems = xmlRoot.childNodes
// The total of items
total = xmlItems.length
// Creating the buttons
for (i=0; i<total; i++){
// Attaching the buttons
accordion.attachMovie("item", "item" + i, i)
// The button reference
itemList
= accordion["item"+i]
// The first node of the item node
itemList.xmlRoot = xmlItems
// The separation between subitems
itemList.separation = separation
// Tabulation between the subitems and the margin
itemList
.tabulation = tabulation
// subItems auto close
itemList.subItemAutoClose = subItemAutoClose
// The subitems height
itemList
.itemHeight = itemHeight
// The subitems width
itemList.itemWidth = itemWidth
// shows/hides the subitems light
itemList
.light = light
// The subitems color
itemList.buttonColor = buttonColor
// The roll over color
itemList
.rollOverColor = rollOverColor
// The arrow color
itemList.arrowColor = arrowColor
// the arrow color on roll over
itemList
.rollOverArrowColor = rollOverArrowColor
// The text color
itemList.TextColor = TextColor
// The roll over text color
itemList
.rollOverText = rollOverText
// the opening easing
itemList.openEase = openEase
// The closing easing
itemList
.closeEase = closeEase
// The roll over fade speed
itemList.rollOutFade = rollOutFade
// open all
itemList
.openAll = openAll
// ignore white
xmlSource.ignoreWhite = true;
// Loads the .xml file
xmlSource.load("accordion.xml");
// Aligning the items each one below the other
this.onEnterFrame=function(){
// Does the align to ALL the items
for (i=1; i<total; i++){
// Aligning the items
itemList._y = itemList[i-1]._y +
itemList[i-1].mask._height + itemList[i-1].button._height +
separation
// The cursor position
cursor._x = _xmouse
cursor._y = _ymouse
// Opens the items
onMouseDown = function (){
// Does this to all the buttons
for (i=0; i<total; i++){
// If is clicked
if (itemList
.button.hitTest(cursor)){
// Shows the current item
showCurrent(itemList)
// Shows the button clicked
showCurrent=function(current){
// Does this to all the buttons
for (i=0; i<total; i++){
// Does this to all the buttons exept the clicked
if (itemList
!=current){
// Close the other items if autoclose = true
if (autoClose){
// Close the other items
itemList.openBox=false
// fades the roll over effect of the other items
itemList
.over = false
//Does this to the clcked item only
} else {
// If it has sub items
if (total>0){
//Hides them if its open
if (itemList.openBox){
itemList
.openBox=false
//Shows them if its closed
} else {
itemList.openBox=true
// If it has no subitems goes to the link
} else {
getURL(xmlRoot.attributes.url, _self)Please don't cross-post in multiple forums. I have answered
this in your other thread. -
I have some old cd's I have burned onto itunes. Howcan I copy them to my iphone without using the cloud? I donot want to mess with my cloud settings because I am a technophobe. Please be gentle
Willy, the procdedure you describe works perfectly for AppleTV G1. In fact, I frequently play DTS music discs ripped to my iTunes library as Apple Lossless (ALAC) and synched to the ATV. What happens is that, as far as iTunes and the ATV are concerned, a conventional stereo 16/44 audio file is being played; however my reciever detects the DTS data stream, and instead of outputting static, it decodes the 5.1 channels correctly. This process parallels the way DTS discs were designed to be played back: a conventional CD player is connceted, via digital out, to a DTS-aware reciever/pre-amp and the two channels of static are recognized as 6 channels of DTS-encoded audio.
However this process will only work if the player (CD, ATV, PC, etc.) sends a "bit-perfect" 16 bit/44.1 khz data stream to the decoding device. In the case of ATV G2 and G3, as has been discussed elsewhere, the unit resmaples all audio - including 16/44 PCM (Redbook CD) - to 16/48. While this is not a big deal for conventional audio CDs, MP3s, and AAC files, it mangles the fragile DTS datastream and renders it undecodable. The resulting static that you hear is just like the static you would hear if you played a DTS CD on a non-DTS capable system.
Sadly, I'm not aware of any easy way around this. You could use a program like Foobar (and the DTS plugin) to convert your DTS CDs to 6-ch .wav or .flac file. From there you could transcode the file to AC-3 and then mux it into a video container that ATV supports. You may need add a dummy video track, for iTunes/AppleTV to be ok with the file, though I'm not sure. This may be a lot of work.
Sorry for the bad news. I wish that the iTunes/ATV ecosystem had better multi-channel audio support.
Steven -
I keep getting this message. Can someone please help me out. I am totally clueless!!
*ERROR MESSAGE:*
_"You can't use this version of the application Mail with this version of Mac OS X.You have Mail 3.6."_It works now!
Here is what I did...
In spotlight I typed "mail", I opened up a "message", and it opened. I looked on my desktop and there was an "iMail" icon that was not there before. I was then able to access the mail normally as i would with Leopard. I deleted the old shortcut on my desktop and placed the new icon in the lower toolbar.
Worked as good as new.. -
Urgent help for extremely new newbie - please.
I have been asked to set up a Labview program to graph and log
thermocouple temperature measurements from two Keithley 2001 Multimeters
and a DC voltage from HP 34420A nano Volt/Micro Ohm Meter. All three are
instruments are IEEE interfaced to a Windows 98 machine running Labview
(version 5.0 I think.) I have a couple of weeks to get the job done.
The problem is that I have never used Labview. I am an experienced C,
Fortran, BASIC programmer but this graphical system is completely new.
My situation is complicated because I am told the experienced person who
was originally going to set this up left under bad circumstances and
took many of the manuals. I would greatly appreciate any and all help I
can get.
Please feel free to send responses directly to me.
[email protected]
Thanks,
Stan ThomasIn article
<[email protected]>,
Stan Thomas
wrote:
> I have been asked to set up a Labview program
to graph and log
> thermocouple temperature measurements from two
Keithley 2001 Multimeters
> and a DC voltage from HP 34420A nano Volt/Micro
Ohm Meter. All three are
> instruments are IEEE interfaced to a Windows 98
machine running Labview
> (version 5.0 I think.) I have a couple of
weeks to get the job done.
> The problem is that I have never used Labview.
I am an experienced C,
> Fortran, BASIC programmer but this graphical
system is completely new.
> My situation is complicated because I am told
the experienced person who
> was originally going to set this up left under
bad circumstances and
> took man
y of the manuals. I would greatly
appreciate any and all help I
> can get.
>
> Please feel free to send responses directly to
me.
>
> [email protected]
>
> Thanks,
>
> Stan Thomas
>
>
All manuals are available at
http://www.natinst.com/manuals/
They also have an example program database at
http://www.natinst.com/support/epd/
Sten Karlson
D/A Production AB
SWEDEN
Sent via Deja.com http://www.deja.com/
Share what you know. Learn what you don't. -
Is there a way in which I can run the following program from within an HTML web site.
The code is from
/* From http://java.sun.com/docs/books/tutorial/index.html */
However I have changed some of it and wish to run it from within a web-site I am building.
Is there a way to do this?
Thanks for any input. Remember I am new to java so forgive me in advance if this is the wrong forum.
import java.awt.*;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import javax.swing.*;
import java.applet.*;
public class troubleShooter extends JPanel {
JLabel label;
JFrame frame;
String simpleDialogDesc = "Options";
public troubleShooter(JFrame frame) {
this.frame = frame;
JLabel title;
// Create the components.
JPanel choicePanel = createSimpleDialogBox();
System.out.println("passed createSimpleDialogBox");
title = new JLabel("Click \"Submit\" When"
+ " you have selected a option.", JLabel.CENTER);
label = new JLabel("Messages will appear here!", JLabel.CENTER);
label.setBorder(BorderFactory.createEmptyBorder(10, 10, 10, 10));
choicePanel.setBorder(BorderFactory.createEmptyBorder(20, 20, 5, 20));
// Set the layout.
setLayout(new BorderLayout());
add(title, BorderLayout.NORTH);
add(label, BorderLayout.SOUTH);
add(choicePanel, BorderLayout.CENTER);
void setLabel(String newText) {
label.setText(newText);
private JPanel createSimpleDialogBox() {
final int numButtons = 4;
JRadioButton[] radioButtons = new JRadioButton[numButtons];
final ButtonGroup group = new ButtonGroup();
JButton submitButton = null;
final String defaultMessageCommand = "default";
final String yesNoCommand = "yesno";
final String yeahNahCommand = "yeahnah";
final String yncCommand = "ync";
radioButtons[0] = new JRadioButton( "<html>Software :</html>");
radioButtons[0].setActionCommand(defaultMessageCommand);
radioButtons[1] = new JRadioButton(
"<html>My printout quality is poor: </html>");
radioButtons[1].setActionCommand(yesNoCommand);
radioButtons[2] = new JRadioButton(
"<html>Candidate 3: <font color=blue>R.I.P. McDaniels</font></html>");
radioButtons[2].setActionCommand(yeahNahCommand);
radioButtons[3] = new JRadioButton(
"<html>Candidate 4: <font color=maroon>Duke the Java<font size=-2><sup>TM</sup></font size> Platform Mascot</font></html>");
radioButtons[3].setActionCommand(yncCommand);
for (int i = 0; i < numButtons; i++) {
group.add(radioButtons);
// Select the first button by default.
radioButtons[0].setSelected(true);
submitButton = new JButton("Submit");
submitButton.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent e) {
String command = group.getSelection().getActionCommand();
// ok dialog
if (command == defaultMessageCommand) {
JOptionPane.showMessageDialog(frame,
"This candidate is a dog. Invalid vote.");
// yes/no dialog
else if (command == yesNoCommand) {
int a = JOptionPane
.showConfirmDialog(frame,"Are you using the correct type of paper? \nTo specify paper type:\n1. Click Start-Control Panel-Printers & Hardware.\n2. Right-click the printer icon and then click Printing Preferences.\n3. Click the Paper/Quality tab.\n4. Select Paper type (ie Photo paper for photos)\n\nDoes this solve the problem?","Follow-up Question",JOptionPane.YES_NO_OPTION);
if (a == JOptionPane.YES_OPTION) {
setLabel("Happy printing!");
else if (a == JOptionPane.NO_OPTION) {
int b = JOptionPane.showConfirmDialog(frame,"Is your printer working correctly?\n1.Refer to printer documetation for maintenance procedures.\n2. Clean the print heads.\n3. Re-align the print heads.\n4. Check the colour range.\n5. Install new ink cartridges.\n\nDoes this solve the problem?","Follow-up Question",JOptionPane.YES_NO_OPTION);
if (b == JOptionPane.YES_OPTION) {
setLabel("Happy printing!");
if (b == JOptionPane.NO_OPTION) {
int c = JOptionPane.showConfirmDialog(frame,"Is your printer fucked?","Follow-up Question",JOptionPane.YES_NO_OPTION);
else {
setLabel("Please try another option.");
// yes/no (with customized wording)
else if (command == yeahNahCommand) {
Object[] options = { "Yes, please", "No, thanks" };
int n = JOptionPane
.showOptionDialog(
frame,
"This candidate is deceased. \nDo you still want to vote for him?",
"A Follow-up Question",
JOptionPane.YES_NO_OPTION,
JOptionPane.QUESTION_MESSAGE, null,
options, options[0]);
if (n == JOptionPane.YES_OPTION) {
setLabel("I hope you don't expect much from your candidate.");
} else if (n == JOptionPane.NO_OPTION) {
setLabel("Whew! Good choice.");
} else {
setLabel("Please try another option.");
// yes/no/cancel (with customized wording)
} else if (command == yncCommand) {
Object[] options = { "Yes!", "No, I'll pass",
"Well, if I must" };
int n = JOptionPane.showOptionDialog(frame,
"Duke is a cartoon mascot. \nDo you "
+ "still want to cast your vote?",
"A Follow-up Question",
JOptionPane.YES_NO_CANCEL_OPTION,
JOptionPane.QUESTION_MESSAGE, null, options,
options[2]);
if (n == JOptionPane.YES_OPTION) {
setLabel("Excellent choice.");
} else if (n == JOptionPane.NO_OPTION) {
setLabel("Whatever you say. It's your vote.");
} else if (n == JOptionPane.CANCEL_OPTION) {
setLabel("Well, I'm certainly not going to make you vote.");
} else {
setLabel("Please try another option.");
return;
System.out.println("calling createPane");
return createPane(simpleDialogDesc + ":", radioButtons, submitButton);
private JPanel createPane(String description, JRadioButton[] radioButtons,
JButton showButton) {
int numChoices = radioButtons.length;
JPanel box = new JPanel();
JLabel label = new JLabel(description);
box.setLayout(new BoxLayout(box, BoxLayout.Y_AXIS));
box.add(label);
for (int i = 0; i < numChoices; i++) {
box.add(radioButtons[i]);
JPanel pane = new JPanel();
pane.setLayout(new BorderLayout());
pane.add(box, BorderLayout.NORTH);
pane.add(showButton, BorderLayout.SOUTH);
System.out.println("returning pane");
return pane;
public static void main(String[] args) {
JFrame frame = new JFrame("Printer Troubleshooter");
Container contentPane = frame.getContentPane();
contentPane.setLayout(new GridLayout(1, 1));
contentPane.add(new troubleShooter(frame));
// Exit when the window is closed.
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
frame.pack();
frame.setVisible(true);Make it an applet.
-
Jsp newbie, please help about @include
I am new to JSP.
I have two jsp files, say , jsp1 and jsp2.
JSP2 is perfectly working. I want to display the result of jsp2 with the result of jsp1.
But I additionally want to supply a value from jsp1 to a variable in jsp2 before calling jsp2.
The result of jsp2 depends on the value supplied.
I couldn't figure out how to do this. A simple @include directive like
<%@ include file="jsp2.jsp" %> doesn't seem to be suitable here.
What options are available here? Please help.
Thank you.Thank you friends for the suggestion. I have yet to try your suggestions.
Before that I came across another problem. Would someone help please?
Why the jsp fails when I include the same JSP page twice in another jsp page?
Of the following two jsp files, the upper one is OK, but the lower one complains that it cannot compile (org.apache.jasper.JasperException).
test1.jsp:
<html><head><title></title></head>
<body>
<table>
<tr><td><%@ include file="single.jsp" %></td></tr>
</table>
</body>
</html>
test2.jsp:
<html><head><title></title></head>
<body>
<table>
<tr>
<td><%@ include file="single.jsp" %></td>
<td><%@ include file="single.jsp" %></td>
</tr>
</table>
</body>
</html>
I want to populate the cells of an HTML table with the results from the same jsp file, by supplying different values to a variable in the jsp file so that its results will be different for each cell. Am I being to foolish here?
Thanks.
Maybe you are looking for
-
How to I convert a Word document to a PDF document?
Please I have checked but did not find good free software tools to convert from word to pdf. Kindly suggest some good tools.
-
How to call Generic Page flow from jsp
Hi All, I have some links in my home page(jsp file).Based on user's selection, i need to show another JSP page using pageflow(JPF). thanks in advance vandana
-
Hi i need help one of my key on the keyboard dosen't work for some reason please help
hi i need help one of my key on the keyboard dosen't work for some reason please help
-
ICloud mail issues in Northern CA?
So I am finally part of the 1%! Any word on when the issues will be resolved?
-
Hi All We are currently working for a Fabrication industry , the scenario is like FG-1 - Some big structures like Pillars , Joints etc (UOM - KG) similar to this FG-2 , 3 RM-1 - Plates size like 2500X5000X8mm thick (UOM - KG) 500 Kg a