Newbie:Problems with SCSI root disk
Hello
I have periodic problems with no matter what disk I put in my root partition. My Sun has several disks, so I can take another disk not being used and configure it as my new root disk, installing Solaris root on it.
But when, this way, I replace the disk by another "fresh" disk and reinstall Solaris all goes Ok during some time (days or months) until suddenly I get I/O Errors allways in that disk.
I use a E250 with Solaris8. The problem also arises with Solaris7.
If I do a probe-scsi-all at ok prompt I frequently see hardware errors in that disk. All those errors where not present previously when my disk wan't the root.
What is corrupting my disks a I use them?
Am I missing something when I put a new disk? Should I change the ID of my previous SCSI disk?
If so, how?
Thanks
Are you using the disks in the same slot? It may be the controller....
Similar Messages
-
I had a problem with the hard disk on a 13" 2010 macbook pro. Replaced the hard disk with an Hitachi 1TB disk but when I tried to erase and format, it fails with input/output error and at other times saying unable to allocate memory. Any help much appreciated!
Zap the PRAM and Reset the SMC, then try again.
-
Problem with external Lacie disk
Hi!
I have some serious problems with my Lacie 250GB Porche disk.
The disk shows up on my desktop but it does not allow me to read and write to it. Apple's disk tool does not manage to fix the disk. I have tried running Diskwarrior, but it gives me an error saying that the disk could not be rebuilt due to a disk malfunction. I am now using Techtool Pro 4.0.4. I have not used Techtool before, only DW. Im running a process called "Recover Files Using Directory Data"...is this the one I should be using? The manual was'nt all that clear about this...Please please help me as I have 44GB of client projects on this disk.
Thanks in advance,
Tom - NorwayHi Richard!
Thanks for your response!
I have now bought Data Rescue II from ProSoft:
http://www.prosofteng.com/products/datarescueinfo.php
It seems that the problem is my external harddrive and not the machine. I get read errors when I try to open projects in Photoshop / Indesign etc.
There are of course companies that can retrieve my data, but thats like my last solution cause they cost loads of money
Hoping that Data Rescue can clone my data to this new hd. The process seems to be taking days... 165.2 hours left and it has been working for two days now
Tom - Norway -
MDS Customization Problem with multiple root components
Hello,
Oracle JDeveloper 11.1.1.5.0 and WebLogic Server Version: 10.3.5.0
I am using Oracle MDS Customization class with the following classes:
oracle.adf.view.rich.change.MDSDocumentChangeManager
org.apache.myfaces.trinidad.change.ChangeManager
org.apache.myfaces.trinidad.change.MoveChildComponentChange
Based on these classes I am moving UI components
<af:panelStretchLayout>
<f:facet name="center">
<af:region />
</f:facet>
</af:panelStretchLayout>
into another component thanks to the MDS.
Once I do the movement and persist, I receive the following waning message:
*<RegionRenderer> <encodeAll> The region component with id: pt1:r1:0:pt2:r1:0:r1 has detected a page fragment with multiple root components. Fragments with more than one root component may not display correctly in a region and may have a negative impact on performance. It is recommended that you restructure the page fragment to have a single root component.*
When I run the application in Oracle JDeveloper 11.1.1.5.0, it work fine, but when I deploy it on WebLogic Server Version: 10.3.5.0 it is not working.
I receive the same warning message on the server and in JDeveloper.
I think that MDS makes a copy of the components that I move because of that it says me that "a page fragment with multiple root components"
The problem is not because of duplication any of the tags <af:document> <f:view><f:form> <html> <head> <body>
After the movement and persistence, I also call the FacesContext to reset its view root with the following code:
FacesContext context =FacesContext.getCurrentInstance();
String currentView = context.getViewRoot().getViewId();
ViewHandler vh = context.getApplication().getViewHandler();
UIViewRoot x = vh.createView(context, currentView);
x.setViewId(currentView);
context.setViewRoot(x);
The idea is that the entire JSF tree to be rebuild on entering page with aim to clear previously drag and drop settings.
Do you know how I can overcome the problem on the server WebLogic Server Version: 10.3.5.0?
This worked on Oracle JDeveloper 11.1.1.3.0 and now the problem is with Oracle JDeveloper 11.1.1.5.0.
Regards,
NikiHi,
what the error means is that you have more than one node under the jsp:root node of the fragment. Say the content of your fragment is
<af:panelGroupLayout id="pgl1">
</af:PanelGrouPLayout>
Then this is okay
if you have
<af:panelGroupLayout id="pgl1">
</af:PanelGrouPLayout>
<af:panelGroupLayout id="pgl2">
</af:PanelGrouPLayout>
or
<af:panelGroupLayout id="pgl1">
</af:PanelGrouPLayout>
<af:commandButton id="cb1"/>
Then these mean duplicated root components. The JDeveloper IDE flags this as Warnings (Structure Window) when selecting the page fragment
Frank -
Basic problem with connecting to disk via Airport Extreme - No Disks Found
I've a Lacie BigDisk (500GB) which connects fine via USB or firewire directly to my Macs (HFS). When I plug it into the AirPort Extreme, the Airport Utility shows the disk as connected, and I've ticked File Sharing, with "Secure Shared Disks" set to "With base station password".
The AirPort Disk Utility is set to Automatically Discover AirPort disks and to Show AirPort Disks in the menu bar. It sees the Airport Extreme, and the action is set to "Connect with Password".
When I close the AirPort Disk Utility I can see the disk icon in the top menu bar, and clicking on this provides a menu with (greyed out) "No Disks Found", and the option to "Open Airport Disk Utility..."
Any ideas - it's driving me mad!
Thanks
AndrewI am having the same problem with a Lacie 320 GB HD as well with my AEBS. I can't get it to stay recognized in Leopard. I have gotten it to work but only for 10 minutes then I have to unplug and start over. I know that it works fine in Tiger but I am having troubles with my drive "disappearing" with Leopard. From what I can tell others have had this problem but I am not finding a solution. Some have said going back to 7.1.1 works however my AEBS is 2 months old and the oldest firmware it has in the airport utility is 7.2. I have also found old versions on the apple website most look for an intel chipset which I do not have I am running a powerbook G4, also my friend on a new MacbookPro couldn't get them to work at all. Air disk is an amazing concept when am I going to be able to use it?
-
Aperture 2.1.1 Vault problem with external usb disk
I have just updated to 2.1.1 and now Aperture freezes every time I connect my usb external disk and try to create or update a vault. I have to force quit Aperture and remove the disk before I can use Aperture again. The only way I can create a vault is to create it on my internal disk then manually copy to the external usb. Another topic here suggested the problem is with network disks but I have a very similar problem with a local usb disk. I have tried two different disks with the same results. All my software and os is up to date.
Does anyone else have this problem?I have a similar problem, and have a not totally satisfactory fix for my issue.
I have my photos stored on an external FW drive.
Originally I also stored my vault on the same drive.
When I started Aperture with this config then Aperture would not pass the loading screen. I would have to kill the process to quit.
If I started Aperture with the FW drive disconnected then it would launch, but I would then attach eth FW drive and have to Manage referenced files.
What has worked for me:
I have removed the vault from the FW drive and Aperture now boots quickly as 2.1 did.
I have to create the vault on the internal HD and copy to the external. -
Hi,
i have a big problem with the context root in jdeveloper 10 g, for this i can´t found a file using "getClass().getResourceAsStream", i don't know why?, i think that is the context root,
the project uses a class WebParametersServlet extends HttpServlet, "WebParameters.SITE_ROOT" read it of a xml.
Please help me.same app, but with two diff context root ?
A web app packaged in WAR can have only one context root. Package a web app in two different WARs for two different context roots.
weabpp1.war web.xml
<?xml version='1.0' encoding='UTF-8'?>
<weblogic-web-app>
<context-root>context-1</context-root>
</weblogic-web-app>
weabpp2.war web.xml
<?xml version='1.0' encoding='UTF-8'?>
<weblogic-web-app>
<context-root>context-2</context-root>
</weblogic-web-app> -
RESOLVED - K8N Neo2 Platinum problem with large Seagate disk
Hi All,
I've been running this system for 4 years and I'm very happy with it. But I've run into a problem:
I'm trying to exchange my 120 GB Seagate Barracuda systemdisk with a 500 GB Barracuda and I can't install XP with SP2.
First I tried to clone the old HD with Norton Ghost and Acronis True Image. The cloning looked fine but after taking the old HD out and moving the new one to P-ATA 1 as Primary Master I get an "error - no operating system found". I also tried a fresh install from CD. After the CD reboots the system I get the same error.
The HD is present in BIOS with the right parameters and all is looking well - but still no go.
I've fiddled around in BIOS (vers. 1.3) with the different settings (LBA, Large, Auto, Csh.) The last 2 options gives the "no operating system" error and the first 2 gives a "disk error" although Seagate says that I should change settings to "LBA".
I only have the new HD in the machine. I also tried fixboot and fixmbr. I can see all the installed files when I put it in as a slave.
So my question is:
Does the K8N Neo2 Platinum have a problem with large hd's as system disk?
Or is this a Seagate or Windows problem ?
Any help is much appreciated!
MadsActually that was the first thing I did just to see if the drive worked :-) - except that I had it as master on the second ide cable. It formats like it should and all partitions report "healthy". The only difference is that the new drives c-partition is set as active (can't find a way to change it back) - while the old one is set as system. Could this make a difference ?
Since neither cloning nor a fresh install works I think the problem is something else. Maybe I should try Seatools and see if that makes any difference.
Thank's all for help so far! - Other suggestions ? -
[Solved][Hal and Partitions] Newbie problem with hal policy
Hello everybody,
As a new user of archlinux for less than a week I have experienced a great distribution after having been for 1 year on Linux.
After installation I was able to solve most of my problems with the wiki and the forums but there is one problem I cannot resolve.
I have installed Kde 4.2 on my computer and I can mount Usb drives, or CDs with hal (It is in the daemons section of my rc.conf) but strangely I cannot access my other partitions such as my Ubuntu partition (ext3), or the family's Windows partition (Nfts). I have installed nfts-3g for the nfts partition hal refuses to let me access it, I will give you what Dolphin says when I try to access the Nfts:
org.freedesktop.Hal.Device.PermissionDeniedByPolicy: hal-storage-mount-fixed-extra-options no <-- (actions,result)
And for the ext3
org.freedesktop.Hal.Device.PermissionDeniedByPolicy: hal-storage-mount-fixedauth_admin_keep_always <-- (actions,result)
I don't really understand what It means but normally I am allowed to mount partitions.
My /etc/PolycyKit/PolicyKit.conf: http://pastebin.com/m57e94025
And my /etc/dbus-1/system.d/hal.conf: http://pastebin.com/m62861179
I've already tried to configure these two with the wiki and the forums but nothing yet.
If you need more information ask me.
Thanks in advance.
Last edited by auratux (2009-02-23 21:24:29)You might want to reread the Hal wiki re: Permission Denied with automounter. Your /etc/PolicyKit/PolicyKit.conf seems to be missing the lines mentioned in the wiki.
Edit: Or maybe it is similair to: http://bbs.archlinux.org/viewtopic.php?id=66008
Last edited by bgc1954 (2009-02-22 14:07:10) -
I have an iMac OS X 10.6.8 and have problems with the backup drive to Time Machine ejecting itself and so does not automatically backup the way it is meant to do. It is connected with an USB cable to my iMac. What could cause this - malfuntioning drive?
The "iLife" apps are not part of any Mac operating system install and are a separate purchase.
Once you get past 10.6.6 you can purchase and download iPhoto, GarageBand and iMovie. iWeb and iDVD have been discontinued.
Snow Leopard 10.6.6 and higher include the App Store application which is what you use to purchase Lion. -
MBP Retina problem with SSD 512 disk on Mountain Lion
Hi, I'm using the latest (10.8.2) on my MBP Retina, with a 512 ssd.
Once a week, if I check the disk with the utility disk, it says I must fix it, restarting with cmd+r. I do it, run the utility disk and fix everything.
Then for few days it's fine until it says, againg, that the error is orphanaged blocks.
I'm using filevault and don't run anything particular, during the week.
How can I fix it once for all?
Thanks
Lucawent to the AS today and they are going to change it.
-
I was resetting my macbookpro 17 (early 2009) to factory settings but was indicating problems on the restore disk. I erased my macintosh hd drive so the hd is empty. What do I do next?
Get an external drive and make a clone of your internal, erase the internal, set it for 1 partition (OSX Journaled) and restore the clone.
-
Problem with E2E Root Cause analysis in EHP1
Hi All,
I'm facing a very strange problem with using the E2E RCA functionality in EHP1. The problem is when I select the systems that I want to analyse and click on a functionality such as change analysis, I get the following error message in SAP GUI:
Action canceled
Internet Explorer was unable to link to the Web page you requested. The page might be temporarily unavailable.
I'm fairly sure that this is a connectivity problem because it only happens on my client machines which are behind the firewall. If I connect to solution manager without going trough the firewall I can access the application. I have checked all firewall logs and it is not blocking anything. I also did a trace using wireshark but could not find anything suspicious.
Has anybody faced this problem? Any suggestions to resolve the problem?
Cheers,
MasoudHi,
If you have PI system in your landscape, I would strongly recommend to upgrade to SP15.
Trace monitoring for PI is to be available from SP17 (Not yet released)
Check [this Link.|http://service.sap.com/e2e].
Hope this solves your problem.
Feel free to revert back.
--Ragu -
Sun 7120 - problems with resetting root password?
We have just taken delivery of a Sun 7120 system, did the initial config today no problems, then came to log in to tweak it and it refused my root password. Logged on the serial console with the same password fine, logged out and now it won't let me back in, just says "login incorrect". Have reset the CLR PW jumper on the mainboard, and rebooted and it then comes up in the preboot system, but reports errors about the ILOM. After powering down and removing the jumper, the root password is still there!
Output on bootup attached below, can anyone help?
Cheers
Primary Bootstrap.
U-Boot 1.1.4
Custom AST2100 U-Boot 3.0 (Aug 17 2010 - 01:30:05) r58107
DRAM: 119 MB
Flash bank 0 at 10000000 has 32MB in 256 sectors (chipSize 1<<25, ratio 1, bufSz
1024).
Flash: 32 MB
VUART1 at port 0x03f8, SerIRQ[4] disabled
VUART2 at port 0x02f8, SerIRQ[3] disabled
Protecting U-Boot flash sectors; monitor_base=10040000.
board_findGpioNum(): ERROR, 'BIOS_TOP_BLOCK_LOCK' does not match any pin.
board_findGpioNum(): ERROR, 'SP_PECI_ENABLE' does not match any pin.
H/W: Lynxplus Service Processor; SOC: AST2100 Rev. 02 ('A3')
PWC_SP_Broken_OD = 0; ARM restart caused by: power-on
The host is OFF(S5) (hostWantsPwr=0, powerGood=0,
allowPwrOn=0|0, outOfReset=0, fatalError=0).
Reset straps=0x8c819180, def. H-PLL=264 MHz, CPU/AHB=2:1, boot CS0# normal spe
ed
PCI w/VGA noVBIOS; NOR 38ns/byte; DRAM clock is M-PLL: 264 MHz (DDR2-528)
DRAM: 128MB data - 8MB VGA, 32-bit noECC, 2 BA 10 CA, CL=4 BL=4 ap=1, 61440 us
refr
Board Revision - 8d
Date: 2011-01-19 (Wednesday) Time: 7:04:21
Reading FRUID...Valid CRC.
ethaddr=00:21:28:3D:BD:9A
eth1addr=00:21:28:3D:BD:9B
Net: MAC1 PHY not ready faradaynic#0, faradaynic#1
Enter Diagnostics Mode ['q'uick/'n'ormal(default)/e'x'tended(manufacturing mode)
] ..... 0
Diagnostics Mode - NORMAL
<DIAGS> Memory Data Bus Test ... PASSED
<DIAGS> Memory Address Bus Test ... PASSED
I2C Probe Test - Motherboard
Bus Device Address Result
=== ============================ ======= ======
2 Sys FRUID (U3003) 0xA0 PASSED
2 Power CPLD (U3301) 0x4E PASSED
2 CPU0 Fault LED's (U3001) 0x40 PASSED
2 CPU1 Fault LED's (U3002) 0x42 PASSED
2 PCA9555 (Misc) (U3005) 0x44 PASSED
2 DIMM IMAX (U3102) 0x12 PASSED
6 Bank Panel Led's (U2701) 0xC6 PASSED
6 DS1338(RTC) ( U803) 0xD0 PASSED
6 Temp Sensor1(LM75) (U3011) 0x90 PASSED
6 Temp Sensor2(LM75) (U3012) 0x92 PASSED
6 Temp Sensor3(LM75) (U3010) 0x94 PASSED
I2C Probe Test - Chassis(2U HYDE24)
PDB Board
Bus Device Address Result
=== ============================ ======= ======
1 PCA9548 Mux (U0202) 0xE0 PASSED
1 PDB FRUID (U0203) 0xAA PASSED
1 MAX7313 (U0201) 0x40 PASSED
1 MAX7315 (U1001) 0x46 PASSED
Power Supply 0
BUS Port DEVICE Address Result
=== ==== ==================== ======= ======
1 0 PS 0 FRUID ( - ) 0xAC PASSED
1 0 PS 0 CTRL ( - ) 0x7C PASSED
Power Supply 1
BUS Port DEVICE Address Result
=== ==== ==================== ======= ======
1 1 PS 1 FRUID ( - ) 0xAC PASSED
1 1 PS 1 CTRL ( - ) 0x7C PASSED
Unified Fan Module
BUS Port DEVICE Address Result
=== ==== ==================== ======= ======
1 2 FT 0 FRUID (U0203) 0xAC PASSED
1 2 FT 0 MAX7313 (U0201) 0x42 PASSED
1 2 FT 0 ADT7462 (U0202) 0xB8 PASSED
1 3 FT 1 MAX7313 (U0501) 0x42 PASSED
1 3 FT 1 ADT7462 (U0502) 0xB8 PASSED
24 Disk Backplane
BUS Port DEVICE Address Result
=== ==== ==================== ======= ======
1 4 BP MAX7313 ( U8) 0x44 PASSED
1 4 BP FRUID ( U6) 0xAC PASSED
LSI Daughter Card
BUS Port DEVICE Address Result
=== ==== ==================== ======= ======
1 4 EXP FRUID ( U07) 0xA0 PASSED
1 4 EXP Tmp Sens ( U04) 0x98 PASSED
1 4 EXP PCA9538 ( U10) 0xE6 PASSED
1 4 EXP EMP570 ( U05) 0x50 PASSED
Connector Board
BUS Port DEVICE Address Result
=== ==== ==================== ======= ======
1 4 CONN FRUID ( U05) 0xA2 PASSED
<DIAGS> PHY #0 R/W Test ... PASSED
<DIAGS> PHY #0 Link Status ... FAILED
MAC1 PHY not ready <DIAGS> ETHERNET PHY #0, Internal Loopback Test ... RX error
status = 0xB00905C0
FAILED
No data received
<DIAGS> USB 1.1 Test ... PASSED
<DIAGS>Access to BIOS Flash ... PASSED
<DIAGS> Testing PowerCPLD version ... PASSED
checking for abnormal reboots: 0:0.
abnormal reboot found -- too long, ignore
Booting linux in 3 seconds...
Un-Protect Flash Bank # 1
flctrl: Recovery U-Boot (r58107) at 0x10040000 is valid (min. r51654).
flctrl: Current U-Boot is not the main one.
bootpkg: Not safe to boot ILOM (stat=1). Check Preboot "vers" command,
then reload ILOM ("net flash") as needed.
ILOM Pre-boot Menu
Type "h" and [Enter] for a list of commands, or "?" [Enter] for
command-line key bindings. Type "h cmd" for summary of 'cmd' command.
Idle time-out is disabled. Set 'bootretry' to enable it.
This is Recovery U-Boot. Use "vers all" to check flash images.
Preboot> vers all
Main ILOM image at 0x100a0000:
Service Processor Firmware
Version = 3.0.9.27, for SP type 52
Date ='Tue Aug 17 01:54:07 EDT 2010', Build ='r58107'
Name ='sysbios'
uboot @0a0000 OK, kernel @102000 OK, root @20d684 OK,
sysbios @c9b6c4 OK, pwrseq @d51aa2 OK, pbsw @d6096c OK
coredump @1500000 8192 KiB, persist @1d00000 2048 KiB, params @1f00000 1024
KiB
Recovery firmware and data:
Normal U-Boot at 0x100a0000:
Date ='Aug 17 2010', Build ='r58107'
uboot @0a0000 OK
Recovery U-Boot at 0x10040000:
Date ='Aug 17 2010', Build ='r58107'
uboot @040000 OK
Primary Bootstrap build: r52205
Permanent environment: not foundI don't think it is. The jumper you saw is likely the ILOM jumper. The ILOM is different than the BUI(OS) password so they can be reset/changed independently.
-
I have a 1 TB Macbook Pro running Mavericks.
My disk is a single-volume...
Here is the information on my disk:
And I'm trying to use boot camp assist to partition my disk, like this:
But when I do, I get this error message:
"The disk cannot be partitioned because some files cannot be moved. Back up the disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again."
It already is a single Mac OS Extended journaled volume. Right? Here is an image from Disk Utility:
Any ideas?Hey there!
It sounds like you are unable to install BootCamp due to an error that your some files cannot be moved, and to format your disk as a single volume, but you have confirmed that it already is. I would verify and repair your disk permissions with the following article next, if you have already restarted your computer and tried again:
Disk Utility 12.x: Repair disk permissions
http://support.apple.com/kb/ph5821
Choose Apple menu > Software Update to make sure you have the latest version of Mac OS X.Software updates sometimes change a file’s permissions to improve security, so updating your software can solve some permissions problems.
Open Disk Utility, in the Utilities folder in Launchpad.
Select the disk you want to check.You can verify or repair permissions only on a disk with Mac OS X v10.7 Lion installed.
Click First Aid.
Do one of the following:
Click Verify Disk Permissions to test permissions.
Click Repair Disk Permissions to test and repair permissions.
Disk Utility repairs the permissions for files installed by the Mac OS X Installer, Software Update, or an Apple software installer. It doesn’t repair permissions for your documents, your home folder, or third-party applications.
If that does not resolve the issue, I would next verify and repair the disk with this:
Disk Utility 12.x: Repair a disk
http://support.apple.com/kb/PH5836
Thank you for using Apple Support Communities.
Take care,
Sterling
Maybe you are looking for
-
How can I reduce the brightness of my screen?
I installed WIndows 7 on my MAC and after installing the boot camp drivers, the screen went really bright. I reduced the brightness to the lowest setting on my keyboard, but it is still bright. The problem is not so much on the graphics, its more on
-
Warning Messages On Deploy (APS 7.0.2/Weblogic 8.1.4)
I'm getting these warning upon deploying the edc-server.ear. Any ideas on what these mean?<br /><br />####<Mar 20, 2006 3:00:18 PM PST> <Warning> <EJB> <hqstwla02> <hqstwla02> <ExecuteThread: '2' for queue: 'weblogic.kernel.System'> <<WLS Kernel>> <
-
Adobe Illustrator classroom in a book CD
Does anybody have a copy of Adobe Illustrator Classroom in a book CD please? I have looked on ebay and they only sell copies with the books? If anyone can transfer the files over to me I can pay a couple of quid for their bother. Or if they know how
-
Disk Image for Firmware Update Utility for LaserJet p2055dn is corrupted
Yep. Not sure what happened with that one. I have submitted the issue to the software team. Hopefully I can get a copy that works out to you soon. Apologies for the inconvenience.
-
''dupe of https://support.mozilla.org/en-US/questions/916648'' .windows 7