Newbie question about Policy Server

Just installed Adobe's Creative Suite 2 Premium, which has LiveCycle. (It was one of those moments of "What's this?" then "Wow!" this is some program.
Does the software to install LiveCycle's Policy Server come with CS2 Premium? Or is there something else to buy?
My web sites are on a virtual server with an unique IP address. The OS is Linux with MySQL. Will this work?
Are there any good books on setting up a Policy Server?

Policy Server doesn't come with CS2 - there's some more information on it on our website here (including system requirements):
http://www.adobe.com/products/server/policy/overview.html
Probably the best thing to do would be to talk to one of our sales folk if you're interested in really getting into it - there's a "Contact a sales rep" link at the top right side of the page.
If you're using LiveCycle Designer, pop by the Designer forum here - there's quite a lot of activity lately.
SteveX
Adobe Systems

Similar Messages

  • Questions about application server architecture

    Hello guys,
    I have few questions about application server architecture�
    I have a task to build a server application which will do the following: Clients (special java clients) will connect to it and send some data for further processing on server side. Chunks of data will be relatively small but they will take a lot of time for processing (it is ok that it will be quite slow).
    Also server will run some sort of �database� where all clients� working data will be stored. So, in case a client loses its data he/she is always able to download it from the server.
    For me it seems, like server will consist of the following components:
    1. �Reception�. This part will be responsible for all client-communication procedures.
    2. �Data storage�. This part will simply store all clients� data and provide some API interface for clients through �reception� to manage it (add/get/delete and so on).
    3. �Processor�. Some sort of dummy-sophisticated module. It will take some input data from �data storage� when it receives order for this and process it. �Processor� will have two states: �busy� which means �processor� processing some data and �available� which means �processor� ready to process new data.
    4. �Manager�. This part will always check �data storage� for new data and �processor� for availability. When �processor� and new data are available �manager� will make an order for �processor� to take new data from �data storage� and process it.
    So, my question is the following: Which technology and approaches I should use to realize my plan?
    I think that I can make �reception� as a Session Bean, but I don�t know yet, what are the best for the rest, for example �manager� and �processor�. I was thinking about writing my own application server (and I can do it), but I would like to learn j2ee technologies, so I think it is a perfect chance for me (I read a lot about j2ee before I wrote this post, but all examples have only �account�-�bill�-�money transfer� I think it is quite far away from reality or I am doing something wrong ;-)!
    p.s. I am thinking about using JBoss as an Application Server. I tested it and wrote some tests. They work and run fast enough, so I like it. Moreover it has module architecture.
    Please, give me some advises and tips!
    Thank you in advance!

    1. �Reception�. This part will be responsible for all
    client-communication procedures.Session bean with remote interface.
    2. �Data storage�. This part will simply store all
    clients� data and provide some API interface for
    clients through �reception� to manage it
    (add/get/delete and so on).Session bean that will use entity beans or hibernate to work with persistant data.
    3. �Processor�. Some sort of dummy-sophisticated
    module.Use a message driven bean. Make Reception to enqueue a message when new data is available for processing. Processor will process the data and store the resut in database using Data Storage session bean.
    4. �Manager�. This part will always check �data
    storage� for new data and �processor� for
    availability. When �processor� and new data are
    available �manager� will make an order for
    �processor� to take new data from �data storage� and
    process it.It's redundand component, because application server will manage messages and processors.

  • 2 newbies question about diskgroups

    Hi gurus,
    I have 2 newbies question:
    Im working in a RAC Database (11.2.0.3) on Redhat 5.3 with some disk groups. One of this groups have 6 disks on it with different space (134, 236G, 236G, 185G, 185G and 185G).
    My questions are:
    1) What would be happend when the lower space disk will be full?
    2) At this moment the diskgroups are at 45% so i was thinking to change their spaces to have all with the same space (around 193G each), it would create any problem? i should restart database or can do it with database up?
    Thanks

    if a disk is filled, what would happen? could i resize the disks with same size without stop database and without affecting the data stored within each disc?
    By the word 'disk' I assume you mean LUN . When a LUN in a disk group is filled, ASM will use the remaining LUNs to store the data. You should always use LUNs of uniform size to avoid uneven I/O .
    could i resize the disks with same size without stop database and without affecting the data stored within each disc
    You can get the Unix/Storage team to allocate more LUNs for this Server. Once these LUNs are added , check if the following pre-reqs are met for the LUN which is yet to be added to the disk group
    v$asm_disk.HEADER_STATUS = 'CANDIDATE'
    v$asm_disk.PATH = /dev/rdsk/youLUNname
    v$asm_disk.NAME will be NULL
    Now you can add the LUNs using
    alter diskgroup DATA_DG01 add disk '/dev/rdsk/youLUNname' rebalance power 4 ; wait for rebalance to finish (check status in V$ASM_OPERATION)
    Yes. The above can be done without stopping the DB. It won't affect the stored data either.

  • Newbie Question about FM 8 and Acrobat Pro 9

    Hello:
    I have some dcouments that I've written in FM v8.0p277. I print them to PDF so that I can have a copy to include on a CD and I also print some hard copies.
    My newbie question is whether there is a way to create a  PDF for hard copy where I mainitain the colors in photos and figures but that the text that is hyperlinked doesn't appear as blue. I want to keep the links live within the soft copy. Is there something I can change within Frame or with Acrobat?
    TIA,
    Kimberly

    Kimberly,
    How comes the text is blue in the first place? I guess the cross-reference formats use some character format which makes them blue? There are many options:
    Temporarily change the color definition for the color used in the cross-reference format to black.
    Temporarily change the character format to not use that color.
    Temporarily change the cross-reference definition to not used that character format.
    Whichever method you choose, I would create a separate document with the changed format setting and import those format into your book, create the PDF and then import the same format from the official template.
    - Michael

  • Newbie question about loading servlets on tomcat

    I have what is probably a very basic question about loading simple servlets on to tomcat to test its installation. I have followed instructions from numerous tutorials to the letter but still I can't get it to work.
    I have installed tomcat on win2k in c:\tomcat. I set up the jdk, environment vars (JAVA_HOME, CATALINA_HOME, TOMCAT_HOME) which all point at the correct dirs. I can compile a servlet without errors. I can also place a test jsp and html file into the root directory and they both work fine.
    However, now I am trying a test servlet and no matter what I do it gives me a 404. I have a servlet class file called "HelloServlet.class" which I placed into the %install_dir%\webapps\ROOT\WEB-INF\classes directory. I try to reference it using this url:
    http://localhost/servlet/HelloServlet
    Tomcat is configured to use port 80 and has been restarted after adding the servlet class file. Does anyone have a clue why this is not working for me?
    Many thanks
    Marc

    You have to add in the web.xml file that it is in the WEB-INF dir, the information about your servlet. An example:
    <web-app>
    <servlet>
    <servlet-name>HelloServlet</servlet-name>
    <servlet-class>HelloServlet</servlet-class>
    </servlet>
    <servlet-mapping>
    <servlet-name>HelloServlet</servlet-name>
    <url-pattern>/HelloServlet</url-pattern>
    </servlet-mapping>
    </web-app>

  • Newbie question about saving files

    Hi all,
    A newbie question here, and maybe it is a dumb question, but I can't get my head around this and sofar found no answer in the forums here.
    When I save a file on my macbook, I can only save it to "top" folders.
    What I mean is I try to save a file for instance to documents/worddocs/lyrics just to say something, then I have to save the file first to documents, and the move it to the lyrics folder via finder or move it to :worddocs folder and then move it again to the lyrics folder. Hope you still get my drift here
    Is there a way to just save it to the subfolders without going through all this moving around?
    Thanks in advance for any advice
    Peter

    When you click File>Save As, you will see the Save As window pop up. At the top, you will see a box entitled Save As, which has a space for your to enter the file name. To the right of this box is an arrow pointing down. Click it. The full file hierarchy will be seen. Then you can save directly to the file you want.
    Hope this helps.
    Don

  • A question about VI server

    Dear all,
    I have some confusion about VI server. Suppose I
    have two computers, computer A will be used as a client
    and computer B will be used as server. A wants to get
    access to a VI (test.vi) on computer B. What
    requirements should computer B meet?
    1). Run LabVIEW?
    2). Run test.vi?
    3). Run test.vi by open VI reference?
    Does computer B should meet all the requirements?
    Thanks a lot for your help!
    Regards,
    Tao Song
    Mechanical Engineering Dept.
    Univ. of Maryland, Baltimore County

    Dear Mike,
    Thanks a lot for your help! I think I understand it
    now. Unlike the datasocket which has a separate server
    program, for VI server LabVIEW itself works as a
    server so it has to be runnig to listen to a port. Am I right?
    But I still have doubt that if test.vi has to be loaded
    into memory on computer B. If I use property and
    method node on computer A, such as FP Open and Run VI,
    can I remotely control computer B to load test.vi into memeory
    and run it?
    Thanks a lot! I really appreciate your help!
    Best regards,
    Tao
    "mikeporter" wrote in message
    news:[email protected]..
    > Computer B has to be running LV or LV runtime and test.vi has to be
    > loaded into memory and be ex
    ecutable (i.e. not broken).
    >
    > From Computer A you first open a reference to the copy of LV running
    > on Computer B. This means you have to know the name or IP address of
    > Computer B, and the port number that LV is listening to for
    > connections (which is configurable through the Options dialog box, or
    > by editing Computer B's *.ini file directly).
    >
    > Once you have the reference to the copy of LV, you open a reference to
    > the remote VI (test.vi) by name with a type specifier defining the
    > structure of test.vi's connector pane.
    >
    > Connect this VI reference to a Call by Reference Node and you can run
    > the remote VI.
    >
    > Be sure to close all the references when you are done with them as
    > this can cause a major memory leak...
    >
    > Mike...

  • Newbie question about Oracle 11G performance

    I have a situation where a newer better faster server running Oracle 11gR1 is running considerably slower than an older slower server running Oracle 10gR2.
    Both of these servers have the same web applications and same dumpfiles loaded into them.
    I personally installed the Oracle 11g on the new server, however, I didn't install the 10gR2 on the older server, some one else did...
    I have checked what I think are the basics: the tables are not missing constraints, the automatic memory management is enabled.
    I know this is a really broad question.
    Newer server:
    Quad-Core AMD Opteron Processor 2352 2.10 GHz (2 processors)
    16 GB memory
    Windows Server 2008, 64 bit
    Raid 5
    Older Server:
    Intel Xeon 1.8 GHz (2 processors)
    4 GB memory
    Windows Server 2003, 32 bit
    Raid 5

    Hi Derik,
    I know this is a really broad question. No, it happens all the time! Here is a similar issue:
    http://blog.tuningknife.com/2008/09/26/oracle-11g-performance-issue/
    +"In the end, nothing I tried could dissuade 11g from emitting the “PARSING IN CURSOR #d+” message for each insert statement. I filed a service request with Oracle Support on this issue and they ultimately referred the issue to development as a bug. Note that Support couldn’t reproduce the slowness I was seeing, but their trace files did reflect the parsing messages I observed."+
    I would:
    1 - Start by examining historical SQL execution plans (stats$sql_plan or dba_hist_sql_plan). Try to isolate the exact nature of the decreased performance.
    Are different indexes being used? Are you geting more full-table scans?
    2 - Migrate-in your old 10g CBO statistics
    3 - Confirm that all init.ora parms are identical
    4 - Drill into each SQL with a different execution plan . . .
    Raid 5 Don't believe that crap that all RAID-5 is evil. . . .
    http://www.dba-oracle.com/t_raid5_acceptable_oracle.htm
    But at the same time, consider using the Oracle standard, RAID-10 . . .
    Hope this helps . . .
    Donald K. Burleson
    Oracle Press author
    Author of "Oracle Tuning: The Definitive Reference"
    http://www.rampant-books.com/t_oracle_tuning_book.htm
    "Time flies like an arrow; Fruit flies like a banana".

  • Two (too much?) newbies questions about KT3 Ultra 2

    Goodmorning all.
    I've bought a KT3 Ultra2 (MS-6380E) motherboard and i've two questions about it.
    First of all I need to buy the optional S-Bracket to use my SPDif sound sistem... where can i buy it in Italy or in Internet?
    In second i've to know the highest processor my MB support becouse i have to upgrade my PC.
    Can U help me?
    Tha a lot and sorry for disturb.
    Hallo.

    Hello,
    question 2, not sure about question 1,
    http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_cpu_support_detail.php?UID=341&kind=1
    You may need this BIOS update too.
    http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=341&kind=1

  • Newbie question about Oracle Parallel Server and Real Application Cluster

    I am trying to find out what kind of storage system is supported by the 9i Real Applicaton cluster. I have looked at the 8i Oracle Parallel Server which requires raw partitions and therefore NAS (network attached storage) that provides an interface at the file level will not work. Does anyone know if the 9i Real Application cluster has a similar requirement for raw partitions? any suggestions of whether SAN or other technology will be suitable? pointers to more information is appreciated.
    Robert

    Hi Derik,
    I know this is a really broad question. No, it happens all the time! Here is a similar issue:
    http://blog.tuningknife.com/2008/09/26/oracle-11g-performance-issue/
    +"In the end, nothing I tried could dissuade 11g from emitting the “PARSING IN CURSOR #d+” message for each insert statement. I filed a service request with Oracle Support on this issue and they ultimately referred the issue to development as a bug. Note that Support couldn’t reproduce the slowness I was seeing, but their trace files did reflect the parsing messages I observed."+
    I would:
    1 - Start by examining historical SQL execution plans (stats$sql_plan or dba_hist_sql_plan). Try to isolate the exact nature of the decreased performance.
    Are different indexes being used? Are you geting more full-table scans?
    2 - Migrate-in your old 10g CBO statistics
    3 - Confirm that all init.ora parms are identical
    4 - Drill into each SQL with a different execution plan . . .
    Raid 5 Don't believe that crap that all RAID-5 is evil. . . .
    http://www.dba-oracle.com/t_raid5_acceptable_oracle.htm
    But at the same time, consider using the Oracle standard, RAID-10 . . .
    Hope this helps . . .
    Donald K. Burleson
    Oracle Press author
    Author of "Oracle Tuning: The Definitive Reference"
    http://www.rampant-books.com/t_oracle_tuning_book.htm
    "Time flies like an arrow; Fruit flies like a banana".

  • [urgent] some  newbie questions about Sun application server

    thank you for reading my post
    1-what is equivalant folder in suna pplication server which act like Tomcat_home\webapps
    its name -i think- is autodeploy folder
    2-how i can mark a context as a "cross Context" cross context are acceable from outside web application context.

    Your first question:
    drop your file under s1as_home/domains/domain1/autodeploy.
    For cross-context, see you need to add the property in WEB-INF/sun-web.xml:
    http://docs.sun.com/source/819-0217/dgdesc.html#wp135273
    table Table A-120 sun-web-app Properties
    Hope that help.
    -- Jeanfrancois

  • Newbie question about livecycle data services es

    Hi all.
    i've downloaded the LiveCycle ES2 VMware virtual appliance, setup it up on a esxi server, workspace, content space, all are up and running, but here comes my question, how do i install livecycle data services in there?how do i set it up to start working with the rest?
    i've read the documentation on how to install, but i'm a bit confused.
    can anyone give me any pointers about this?
    help would be appreciated
    thanks in advance

    1) In Workbench ES2 create a process to create a new user. If you need to create a group there is also a service to create group. Create a short-lived process using the Avoka service > Create User operation. The Create User operation has the inputs depicted below.
    2) Create a process variable called 'newUserXml' of type 'xml' and declare the variable as input. Ideally, create a schema for the xml.
    3) The Create User operation has a single output, a string containing the user ID. Create a process variable called 'userID' of type 'string' and declare the variable as output.
    3) Save, check-in, and deploy the process.
    4) To test the process, invoke the process from the Workbench. For the input variable, plug data into an xml structure such as this...
    <NewUser>
    <Login/>
    <Password/>
    <CommonName/>
    <CanonicalName/>
    <Description/>
    <Email/>
    <Initials/>
    <OrgName/>
    <Address/>
    <Telephone/>
    </NewUser>
    5) If the test succeeds, you are ready to create the Flex application. If not, figure out why.
    6) Build a Flex app. Once you deployed the process, the remoting endpoint is automatically created and can be accessed by Flex. Here is a stub.
    <?xml version="1.0" encoding="utf-8"?>
    <mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" creationComplete="initChannelSet()">
    <mx:Script>
    <![CDATA[
    import mx.messaging.channels.AMFChannel;
    import mx.messaging.ChannelSet;
    import mx.rpc.events.ResultEvent;
    import mx.rpc.events.FaultEvent;
    private function initChannelSet():void {
    var cs:ChannelSet= new ChannelSet();
    cs.addChannel(new AMFChannel("my-amf","http://localhost:8080/remoting/messagebroker/amf"));
    ro.channelSet = cs;
    private function submitRequest():void {
    var newUser:XML = new XML(getXmlData());
    ro.setCredentials("administrator","password");
    ro.invoke({newUserXml:newUser});
    private function remotingResultHandler(event:ResultEvent):void {
    var userID:String = event.result.userID;
    private function remotingFaultHandler(event:FaultEvent):void {
    Alert.show(event.fault.faultDetail.toString());
    private function getXmlData():String {
    var xmlStr:String = "<NewUser>"
      + "<Login>" + login.text + "</Login>"
      + "<Password>" + password.text + "</Password>"
      + "<CommonName>" + commonName.text + "</CommonName>"
      + "</NewUser>>";
      return (xmlStr);
    ]]>
    </mx:Script>
    <mx:RemoteObject id="ro" destination="MyApplication/processes/CreateNewUser"
       result="remotingResultHandler(event)" fault="remotingFaultHandler(event)"/>
    <mx:VBox>
       UI goes here...
       <mx:Button label="Submit" click="submitRequest()"/>
    </mx:VBox>
    </mx:Application>
    Steve

  • Questions about RH Server features

    Hi Adobe users,
    we're considering to recommend RoboHelp Server as a
    publishing solution to a client. They are already using RoboHelp
    and want to make the contents available online. Another issue is
    centralized management of their help content documents. I'd be very
    glad if someone could answer the following questions:
    Is it possible to integrate RH Server
    with a CRM system or another user management system for
    authentication? Can it be integrated in a single sign-on
    infrastructure?
    How does the access control mechanism
    work? Can I set permissions who is allowed to publish certain
    documents/projects?
    Does it support workflows
    (review/accept/reject)? Or is this done using the staging
    server?
    Does it support content versioning?
    Or do we need RH SourceControl for that additionally?
    Does it support locking (check-in,
    check-out) of documents to allow concurrent editing?
    In short - does the RoboHelp server act as a document
    management system, or do the authors have to store the contents on
    their local computers and publish only the final version? Another
    issue is translation management - can the authors publish one
    language version, which is translated by other people (in other
    countries) and published to the same server?
    Thanks a lot in advance for any help!
    Andreas Hartmann

    Wow, Andreas. Welcome to the Forums.
    That's quite a laundry list!
    The answers are pretty much, "yes", if I understand
    correctly. That said, I don't know that much about CRMs, so your
    mileage may vary.
    To start, you might want to take a look at my article on the
    Adobe Developer Network for an overall perspective.
    Adobe
    RoboHelp Server 6 improves the feedback loop
    I view RoboHelp and RoboHelp Server as a "content" management
    rather than a "document" management system though this is a bit a
    semantics. Using variables, conditional build tags and Single
    Source Layouts, you can manage the content of your output in a
    fairly granular way (including to some level, your translation
    issues).
    In other words a team of multiple authors can manage the
    content of a website in the way you describe with a combination of:
    1. The authoring client (RoboHelp's main application) to
    develop content and manage it.
    2. RoboSource Control (for the check in, check out and
    versioning you mentioned) where authoring content source material
    is stored on a central server for backup and access by the team.
    3. RoboHelp Server for managing the authentication of who has
    access to the web server for publishing, etc. RoboHelp Server is an
    Active Server Pages application running on IIS, typically with a MS
    SQL Server or Oracle DB as the back end. As such, it uses Windows
    Server straightforward authentication methods. When you set up the
    author's project to publish to the server it will ask you for the
    Username and Password. Once this is configured, it's seamless from
    there. That login name/password can be the same as whatever you
    call your single sign-on pair as long as it conforms to the Windows
    Server scheme mentioned earlier.
    The RoboHelp author who may be designated as the "admin(s)"
    of the team can create and assign permissions from the authoring
    client and otherwise manage the Server site remotely without having
    to pester the Web Administrator for maintenance of the site.
    The staging server scenario you mention is an option that is
    completely up to your team and the IT folks. RoboHelp Server
    doesn't care one way or another. It's just an application sitting
    on a IIS web server. That server could be the "development or
    staging" server or the so-called "production" or live server.
    The different languages you mention could be published to the
    same server and comingled into a single site (kind of messy) or you
    could have different language sites (as long as they are different
    domains/IP addresses) sitting on the same RoboHelp Server enabled
    machine.
    Regarding language, one important item to research is the
    RoboHelp version you are using and it's language support. The
    much-anticipated Adobe RoboHelp 7 (now in beta and expected "before
    the end of the year") will have full Unicode/double byte character
    support for 35 languages and a wonderful way of handling
    translation workflows.
    Well, that should get you started. Let me know what I've
    missed!
    Thanx,
    john

  • Newbie question about Premiere Elements Organizer

    This is a pre-newbie – let’s say “virgin” question. If there is an answer already posted elsewhere, please send me a link.
    I’m about to install Premiere Elements 9 to do some clip editing and animation from still images.  This would be my first attempt to edit clip or do some animation from still images, besides using Windows Media Maker with my HS students. However, I have been a pretty serious photographer for 20+ years with 1,000’s of images which I now work on in PS CS5 Extended and Lightroom 3. I use Adobe Bridge and LR library to catalogue and organize my images. I’d like to continue to use AB / LR Library to organize my new clips and projects. From reading Bill’s posts, it seems I can use Adobe Bridge, copy my original file, resize in Photoshop, and save in a new folder to use for a Premiere project. This would seem to be most intuitive way for me to work. I already have keywords, metadata, actions in PS… etc. But I think Bill is using Premiere Pro, while I’ll be installing Premiere Elements, which comes bundled with Elements Organizer. Do I need to install or use Elements Organizer? What are the advantages/disadvantages or EO?  I guess I’m a little worried about installing the programs and having EO automatically acquire images using presets/defaults that I don’t want to use as well as issues with subfolders, etc. I'm running Windows 7.
    Thanks
    FYI- this is a great animation project
    http://www.thejohnnycashproject.com/#/explore/TopRated

    ziggycat4 wrote:
    I guess I’m a little worried about installing the programs and having EO automatically acquire images using presets/defaults that I don’t want to use as well as issues with subfolders,
    EO doesn't do much with the files themselves, just maintains links to the sources.
    For folders you are best to use the folder view in EO to move them as it doesn't keep track of folder locations when changed in Windows Explorer. From the File options in Bridge I think that is pretty much the same.
    ziggycat4 wrote:
    I would like to get as much input as possible on the advantages/disadvantages of using EO vs say Adobe Bride from others who use Elements Organizer.
    Any insights would be appreciated.
    Can anyone who has used both EO and AB comment on how EO handles missing (hidden) files, syncing issues, computer hanging up or crashing....etc?
    I've only messed around a little with Bridge. But to me it seems lightening fast by comparison to EO. The features Albums and Tags in EO seem much the same as Collections and Keywords in Bridge.
    EO has Face Recognition abilities - getting more sophisticated in each version. I've not seen this feature in Bridge.
    By default EO allows you to open a file in any of:
    Photoshop
    Photoshop Elements
    Premiere Elements
    A single used-defined application (I have mine set to ColorPilot).
    Bridge only seems to link to Photoshop.
    Missing files can be located manually or by allowing EO to search for them.
    Cheers,
    Neale
    Insanity is hereditary, you get it from your children

  • Question about Lion Server usage...

    Hi there!
    I'm new to Lion Server (at most, I had used the SL sharing preferences, but never the Server Admin or any of those tools...)
    I'm having some troubles understanding Lion Server. First of all... where are all the files stored?? I know the web server files are stored at /Library/Server/Web... but what about all mails, wikis, and those files?
    That is one question... the other one is... while fiddling with the wiki server I noticed that when I created a user, it's profile page is saved on the wiki and when I delete that user, the wiki document is still there! Wasn't it supposed to be deleted as I deleted the user itself?
    I can't seem to find a manual or something, only for SL Server not Lion.
    Can someone please help me out?
    Thanks!
    - Eduardo

    Eduardo
    At the moment there is very little for Lion Server. What little there is, is here:
    http://www.apple.com/uk/support/lionserver/
    and here:
    http://manuals.info.apple.com/en_US/lion_server_upgrading_migrating.pdf
    The administration manuals take some time to become available which is usually the case when Apple release a new version of the Server Version. However most of what's there does not change that much and generally the 10.6 Administration Manuals will contain most of what will eventually become the 10.7 Administration Manuals. Again this has always been the case going back to at least 10.3 Server. Technologies introduced in 10.5 Server such as CalDAV, Wiki and Blog etc did not change that much in 10.6. Apple also moved away from Cyrus as one of the Mail MDAs to Dovecot. But again the locations of where these were stored did not change. Going back to CalDAV and CardDAV these now appear to be amalgamated into one store.
    As ever with any version of the Server - regardless of platform or age - it's a good idea to have plenty of backups and to experiment first with a test/lab environment before rolling it out to a full production server.
    HTH?
    Tony

Maybe you are looking for