Newbie Question? Audio Record

Have created Aggregate Device. Input = Firewire Audio, Output = Built In Audio
Audio 1 = Input 1. I see the level bar moving on both the Audio track and also the Mixer.
However I have no indication that Audio is being recorded - playback is quiet. Metronome is audible
This setup works with Garage Band,
1: How to setup Logic to record Audio (to Audio 1)
2: How to confirm that Audio is being recorded
3: How to setup Logic to playback Audio thru computer's audio out jack
Thanks

Why aren't you using the audio output of your Firewire device?
Have you checked the Audio/Midi Control Panel?
The Audio Tab is where you set your inputs and outputs.
With your Firewire device plugged in, you should see it as one
of the options in the Input-Output fields.
It may not want to have the input and output on different devices.

Similar Messages

Newb question - audio interfaces - advice pls

Hey all, new to making music in the uk and have got myself a tutorial guide to logic and just getting started...cant wait to start making music, it seems awesome...
have got myself a macbook pro and logic pro 8.
I have discovered i'll need a midi audio interface asap to play a midi keyboard into logic, could anyone give me advice, if theres any that aren't compatible with macs or any that are particularly good for my price range/beginner model?
I am not likely to record more than 2 instruments at a time for a long while, probably just a keyboard for the foreseeable future, as i will probably just dabble in hiphop/trip hop beats to begin with
(have tried to search the forum but get a bit bogged down with the terminology as am new to this!)
any advice would be welcome...I dont mind paying between 150-200 for this..
thx very much!!

I'm proud to say that i only regretted the purchase of my first guitar : ) every other piece of equipment has served its purpose wonderfully...
if you are going to buy something that only does one thing, make sure it does it well...for example, make sure that the guitar your using is comfortable and crafted well...
if you are going to buy something for various uses (i.e. audio interface) make sure that the features it possesses are applicable to your cause. Dont spend all that money on a audio interface with preamps if you can't sing, dont want to sing, and never ever will sing...much in the same sense that one wouldn't buy an iPhone if they already had a good phone, a good ipod, a good computer...the money pays for convenience sometimes...
in this particular situation concerning audio interfaces, the money you're paying only goes so far for features (preamps, inputs/outputs) the majority of the money after those features really goes for the sound quality. I bought my firepod on ebay for half price and it works like a charm...just know what you want to contribute to your songs by purchasing one
Message was edited by: dinkydkmgshred

New mover question re: Audio recording

First impressions of this move to a Mac are very good indeed.
The question: I wish to be able to record analog audio to my Mac, edit and clean the recordings and burn to CD. could any one reccomend any software that I can use to achieve my aims.
Thanks in advance.

Zylog
Audacity is OpenSource and a very capable audio recorder/editor.
http://audacity.sourceforge.net/
Don't forget to set your Line In options using the Sound Preference Pane.
Regards
TD

Hello! Newbie with PROBLEMS! Audio recording majorly DELAYED?!?!?!?? help?

Hello there! I LOVED Logic 7, was very happy to get Logic 8. Then I installed Leopard. Now Logic is F'ed up. At first I had the Coremidiserver not responding issue. I deleted those MIDI drivers as well as Reason and my Melodyne rewire and bridge plugins. But when I want to do an Audio recording, Logic freezes, I get the rainbow death wheel for 60 seconds, and THEN it starts recording. It is really bad for creativity to have to wait to get the audio track to record. Does anyone know what could be going on or how I can fix it? I am using an Mbox2. I have the Line6 Toneport, but that is not working although it works for my boyfriend who has the same computer, logic 8 and leopard. I'm confused!!! what should i do? Can genius bar help me? Sorry for sounding neurotic, I'm just really anxious to make music an d not have all these technical issues! Thank you VERY VERY much for any advice.

Are you recording to a macBook Pro internal hard drive? or to an external drive?
How much memory do you have?. The delay of 60 sec before recording is not normal. Your computer is checking something else, or is forced to do another task before executing the command of recording
logic 8 need a lot of memory the absolute minimum is 1 GB of Ram but 2 GB or more is highly recommended.
best of luck
Eric D

Audio Recording Time Question.

I've set the Audio recording time to 20 minutes and then recorded a stereo audio track (Guitar FX) simultaneously with three MIDI input channels. We stopped after about 15 minutes of recording only to find the audio had been truncated after just 7 minutes! The 'de-mixed by channel' MIDI tracks were complete though. This happened every time we did a take and there was no warning audio recording had stopped!
I'm confused. Do you have to divide by two and minus some from the Recording Time setting just because you record in stereo? Or do I have a vital page missing from my manual?
I'm using Logic 7.2.1.

Make sure that your Projects End position is longer than 201(top right in the Arrange,drag the end position),but normally that won't be the case as Logic auto adjust it when you finish your recording.
try to see if this is it
You can also type in the bar number,to where you want your project to end in the transport bar(cmd+7),under Bpm,double click.

SIMPLE QUESTION, BROWNIE POINTS FOR ANSWERERS: changing the file path used for an audio recording

After changing the name of an audio recording in the .band Media folder, the .band file continues to use the previous file name to try to find the audio file. I want to update the file path so that it uses the same file but with the new name. I thought I might be able to change the file path by editing projectData, but it appears to be encoded.
This is a common, crucial feature present in virtually all DAWs. Surely there must be a feasible way to do this in GarageBand?

you can't change the names of GB's assets behind its back
if you want to change the name of the region that GB displays: double click the region within GB to open the track editor, then double click the name of the region (in the track editor) to change its name

External Hard Drive and Audio Recording Application

Hi, hope everyone is doing well today. I'm new to this forum but I have been occasionally browsing it from time to time and find it very useful. So I figured I would post a couple questions that I have.
First of all I would like to tell you all excatly what I want to do with my computer. Currently I am trying to optimize my computer for the Audio Recording Application I have *Cubase SX 3* I recently just upgraded my RAM from 512 KB to 1.5 GB. My next purchased is most definitaly going to be an external hard drive, which leads me to my first question.
1. If someone could recomend me an external hard drive that is abosolutly amazing for audio recording and such around $150. I would ONLY be using the drive to save my audio files. Definitaly needs to be firewire also.
2. Next question is. I've heard of people booting from their external hard drives which has nothing but there OS and there audio recording application. That way when they boot it up they don't have processes running "Behind the scenes" and taking up some processor power. Is this true? If so, how would you going about doing this and what would I need?
3. If anybody else that is reading this is like me and does alot of audio editing on their iMac G5 computer if you could give me some tips in optimizing the performance of the computer in order to get the most out of it.
Any help would be greatly appreciated.
Thanks ahead of time everyone.
Bard
iMac G5 w/o iSight Mac OS X (10.4.4) 20" screen 2.0 Ghz, 1.5 RAM, 250GB Hard Drive

1. If someone could recomend me an external hard
drive that is abosolutly amazing for audio recording
and such around $150. I would ONLY be using the
drive to save my audio files. Definitaly needs to be
firewire also.
Hard drives are pretty much the same. 7200 rpm are obviously a bit faster than 5400rpm. Why Firewire? USB 2 is about the same speed as standard Firewire 400, but the drives are cheaper.
2. Next question is. I've heard of people booting
from their external hard drives which has nothing but
there OS and there audio recording application. That
way when they boot it up they don't have processes
running "Behind the scenes" and taking up some
processor power. Is this true? If so, how would you
going about doing this and what would I need?
OS processes are going to be running in the background regardless of which disk the OS is on, that's what an OS does! If you don't want more processes simply make sure you don't have any other apps open. I don't know Cubase, but a G5 will handle video editing along with background tasks no problem, and video editing generally involves far more data manipulation than just sound, even if you're doing multiple tracks.
You can easily install the OS on an external hard drive using your original system install disk. Simply connect the drive and choose that as the destination in the installer. To boot from that you would choose it in System preferences/Startup Disk. You could minimise that system by deleting other applications from that drive's Applications folder, turning off internet connections, disabling all widgets etc, but as long as you only have Cubase open it shouldn't make too much difference.
3. If anybody else that is reading this is like me
and does alot of audio editing on their iMac G5
computer if you could give me some tips in optimizing
the performance of the computer in order to get the
most out of it.
There's not really much else to optimise. Modern Macs are not like computers of old, and OS X is a very modern system, not requiring the type of disk optimisation etc that there used to be.
See: http://docs.info.apple.com/article.html?artnum=25668

Is Logic Pro the Best Audio Recording Software for Mac?

Couple questions. I do a lot of audio production and work currently. I use a gateway with Cubase, and its not bad, but I feel like I need something mroe high end.
I'm looking at the 17 inch Imac. Does anyone record using this computer? How's it sound? Is there any way to put in a new soundcard or something if i don't like the current one?
Secondly, is logic pro the most advanced and best audio recording software for the mac? Are there others as well?
I know about Pro Tools, but it seems like there isn't anything high end enough that is TOO high end.
Does the Pro version have superior mixing capabilties. I am primarily going to be micing a guitar amp and having a mixer run into a firewire port, and also using a preamp for my guitar direct into the computers USB.
Lastly, how are the mixing features on Logic Pro vs. Logic Express? I do a lot of post production mixing as well, and use VST plugins. Speaking of that, will it accomodate using a drum program like BFD through VST or Midi like Cubase will?
Thanks for your time guys.

Couple questions. I do a lot of audio production and
work currently. I use a gateway with Cubase, and its
not bad, but I feel like I need something mroe high
end.
Yes, you do indeed need sth more high end.
I'm looking at the 17 inch Imac. Does anyone record
using this computer? How's it sound? Is there any way
to put in a new soundcard or something if i don't
like the current one?
It's not an iMac, but a faithful PowerBook G4 that I am using. Apples Core Audio is awesome. Your sound, however, will depend on your interface.
Secondly, is logic pro the most advanced and best
audio recording software for the mac? Are there
others as well?
That's why we are here, and that's why you ended up in this forum as well
To me personally, Logic sounds warmer and bigger than any ProTools system I've ever heard. From what yopu described as the work you need to do, there is no comparable application. Logic also offers you many more features above and beyond what you currently need to do.
I know about Pro Tools, but it seems like there isn't
anything high end enough that is TOO high end.
Everybody is using PT, and you should maybe get a Light Edition version of it. However, as stated above, Logic offers by far more possibilities.
Does the Pro version have superior mixing
capabilties. I am primarily going to be micing a
guitar amp and having a mixer run into a firewire
port, and also using a preamp for my guitar direct
into the computers USB.
For your purpose, Logic does have superior mixing capabilities. In my humble opinion, only the popularity of PT made it become the choice of studios and engineers, but things are turning...
Lastly, how are the mixing features on Logic Pro vs.
Logic Express? I do a lot of post production mixing
as well, and use VST plugins. Speaking of that, will
it accomodate using a drum program like BFD through
VST or Midi like Cubase will?
If you do post production mixing, forget about Logic Express altogether and go for Logic Pro. LP will accomodate tons of plug-ins, and it comes with a bunch of great one's as well!
The format for the plug-ins is called A(udio) U(nit) and works flawlessly. Many VST plug-ins are also available in AU format and the development of those is moving fast forward.
In other words, yes, you will be able to use BFD in Logic by means of the AU format.
Thanks for your time guys.
You're welcome.

Other ways of adding audio recording to presentations Adobe Presenter 8?

Hi there,
I just realised that I asked a question in the wrong language! I have a quick question re. audio recording in AP8. Is there anyway to add audio to a presnetation other than with a traditional recording device? i.e. can audio be recorded via PC or telepohne and then be added to the presentation? if so, how?
Many thanks!
KH

You can use the Import Audio tool to import any MP3 or WAV audio file. Presenter doesn't care where the audio file comes from, so as long as you can record the audio as one of those two file types, or convert it to one of those file types, you should be able to bring it into Presenter.
To simplify the process, you may want to break up the audio files so there is one for each slide, but this can be done in the audio editor if needed.

How can I play the current slide only when there is an audio recording?

Hi,
I have a 10 slide presentation where I am recording audio one slide at a time. If I have the current slide selected and click play, Keynote plays from the beginning of the presentation.
Is there a way to have Keynote playback only the slide selected when audio is recorded?
Thanks,
humbucker

humbucker237 wrote:
Thanks! That really helped. Why does the audio recording cause so many issues when it's done using Keynote?
humbucker,
I don't really have an answer for that. It usually boils down to complications when all combinations of possible uses are considered. One scenario may seem a no-brainer taken by itself, but not when other options are in play.
I was responding to your specific question about Quicktime recording. You could also use Garage Band, Audacity and the like, of course. Quicktime is just so much easier than any other option that I'm aware of for making short, simple, recordings.
Jerry

Audio recording redirection in Windows 2008 R2

Hi, i try to setting up audio recording redirection with no success. I use Windows 2008 R2 with Remote Desktop Services role installed and Windows Seven as client computer. I edit local group policy on Windows 2008 R2. Computer settings - Administrative Templates - Windows Components - Remote Desktop Services - Remote Desktop Session Host - Device and resource redirection:
Allow audio and video playback redirection - Enabled.
Allow audio recording redirection - Enabled.
With this setting i can hear audio on my local computer, but no recording devices in sound properties. Anybody know how to troubleshooting this behavior?
Some screenshots from RDP Sessions.
http://img27.imageshack.us/i/soundplayback.png/
http://img24.imageshack.us/i/soundrecording.png/

Hello Pavel,
Thanks for your feedback.
Regarding the sound latency issue, I agree with TP on the suggestions to troubleshoot it via hardware/driver level. Based on your feedback, this issue doesn’t appear after rebooting the terminal server. Please let us know if it happens again.
Regarding your new question, I’d like to share the some assessment based on my experience.
After the Remote Desktop Services role is removed from the server, the remote desktop connection will start administrative sessions to access the server. In such a case, redirections audio recording redirection is not supported any more, but Audio Playback redirection is still supported. Therefore, you can still get the sound redirection provided it is configured so. therefore, it is a normal behavior.
Please feel free to let us know if you need any further assistance. Thanks.
Lionel Chen
TechNet Subscriber Support in forum
If you have any feedback on our support, please contact [email protected]

Why is my audio recording late?

For some reason my audio is recording out of time.
I have to manually move it back in time. I use my ear to do this but it would be great if i can find out why its doing it and stop it happening in the future.
It might be because I'm recording into a session with lots of plugins etc but I'm still not sure why that would make the audio record late?
Anyone able to help with this one?

Devices does open by default when you select Prefs > Audio
However, I posted up a screenshot for you because under 10.1 the Audio > Devices dialog box is slightly different to previous versions.... They moved some stuff like... 24bit Recording... to the general tab... and I was trying to preempt the "Why do the audio prefs look different" type questions
Old version...
10.1 version
Cheers.
Nigel

Audio recording: MacBook VS MacBook Pro

So here I am.
Been reading a lot about the introduction of MacBook Pro/MacBook and I'm now really confused about which I should choose. I'm seeking for a notebook for live audio recording and the price gap between the MacBook and the MacBook Pro mystifies the hole thing.
MacBook is really tempting me since it's not that far by terms of caracteristics from the Pro. I don't really need a unique GPU since I don't really like playing games on computers. But I do use Photoshop and some graphic intensive applications and I would need room for eventual Photo/Video editing. Then, I was thinking of getting a MacBook 2 gHz (white) with 2 GB of RAM to allow some to the integrated chipset. Question 1 answered.
I've read a lot about the GLOSSY screen and I must say, I prefer the MATTE screen since it doesn't over-saturate and it isn't reflective. Though, I'm giving myself some time to hear feedback from people doing Photoshop work and having compared the results from what's on screen and what's actually printed (with a good quality printer). I'd also like to have feedback from people having worked with the MacBook outside or by a window with sunshine.
The whole issue is that the 2 gHz , 15 inch screen, 1 GB of RAM (1 dimm) MacBook Pro pro has a 227$ price difference with the MacBook 2 gHz (white) with 2 GB of RAM (CANADIAN PRICES). My budget is tight, so I want to be sure if paying that difference is worth it or I could be fully satisfied with a MacBook.
Thanks for the attention!

As long as graphic performance is not an issue (which shouldn't be for audio recording), you will be absolutely fine with the MacBook. There is no difference in spec between the 2GHz MB and the 2GHz MB Pro except for the graphics card (and hard drive speed). I use Logic Pro and Pro Tools LE extensively and have a MacBook on order. The only thing you may need is an external hard drive if you plan on running lots of tracks. You should be very happy with the MacBook unless you absolutely need the extra screen real estate or prefer the matte finish. I should be getting mine today and will report back on how I like the screen. Hope that helps!

Audio recording - prompts after every slide?

This question concerns the prompt box that appears after
recording audio for a slide. Basically, if the audio track is
longer than the slide length, you are prompted on how to handle
this after each slide. Is there a universal setting for this so
that we are not prompted after each slide? Or do you have to
increase the slide length before each audio recording to avoid this
issue? Either way, this is a time constraint. Thanks in advance for
any insight you may offer on these topics.

Hi stunamistyle
There is no setting I'm aware of for this. What you see is
what you get.
Cheers... Rick

Audio Recording - ports

Hi. I have a c2d MBP and I am going to use it for some audio recording. Don't know if I am going to use Logic, Pro Tools, Cubase, or just use Garageband yet. But in my search for an audio interface, I have a question. If my external hard drive is running through firewire 800 port, do I need to stick to just getting an audio interface that is usb? Or can I run external drive through 800 firewire and an audio interface through the firewire 400 port? Thank you.

don't forget though, that if you connect a FW400 audio interface to your machine, your entire FW bus will slow down to FW400 speed.. regardless of whether your drive is connected to the 800 port, and regardless of what order you chain your devices together. it can still work OK, but just be aware of it.
if you can't get enough speed this way, your alternatives are to either buy a PCexpress card that adds a separate FW800 bus to the machine, which you can dedicate to the drive, or you can get an eSATA card and connect a drive to it, leaving the built in firewire alone for your interface.

Quicktime audio recording...records the audio of QTmovie I am playing

I am triying to create a new audio recording (I am doing a translation). But I need to playback the quicktime movie I am trying to translate. (So, I will know what i am translating), but the new audio recording records the audio of the quicktime movie i am playing not my voice. ...help I am a rookie...XP

Hello, Brenden. Thanks for taking the time to look at my question.
What I mean is, whenever I plug my headphones into my computer, it's as if they're not there. I can still hear what I'm playing even though the headphones are plugged in.
I don't know if that clears up what you didn't understand about my question. I posted a video on Vimeo.com showing what my issue is. I hope watching it will make my question a bit less vague.
Here's the link to it:
https://vimeo.com/115614338
-"apple.asker"

Newbie Question? Audio Record

Similar Messages

Maybe you are looking for