Newbie question: How do I cange text on the buttons from a template?

I don't mind when it takes a while to figure out stuff that's really complicated, but it kills me when I can't get something that should be (and I'm sure is) easy. I have my first downtime since getting my Final Cuts bundle and am trying to figure out DVDSP using a menu template to start. I've managed to import all my assets, manage the navigation, change the title, add a slideshow, do looping and linking, and everything plays fine in the simulator. What I can't do is change the names from "Button 1" etc to appropriate names, ie "contact". I'm sure it's something really simple, but I'm not finding it. Any help out there?
G5 Quad Mac OS X (10.4.5)

Oh, inspector - text. OK, second time I've posted a question here after working forever on it then found it as soon as I posted.
G5 Quad Mac OS X (10.4.5)

Similar Messages

Newbie question: How to share large QT movie files exported from FCP X?

Well, I've navigated through FCP X for the first time and I now have 16 QuickTime movie files I have exported from FCP X. Each file is a song from a live band performance. The files are:
- Apple ProRes 422
- 1920 x 1080
- 24-bit
- Frame rate 29.97 fps
Now I need to share these files with the band members. They will use them for two purposes:
- Watch, as feedback on their performance. In this case, I'd like to preserve the quality as much as possible
- Put some of the movies on YouTube, where quality will be lost, of course. They may post only short clips from the songs.
These 16 .mov files total 115GB. The smallest is 6.5GB, the largest is 13.9GB.
The quality of the movies is fantastic, both video and audio. I cringe to think about degrading the quality............but I have the practical problem of how to get the files to five different band members.
I normally distribute audio files I've mixed in Pro Tools via DVD-R discs, but the files are much smaller.
What are my options for sharing the files?
Do I need to use an application like Compressor to compress the files (ugh) to get them onto multiple DVD-R's?
I would assume this is a common problem that all FCP X users deal with.

I strongly recommend you to use Compressor. It is easy to use and there a lot of presets.

How? Down load text to the itouch from the computer

Hello
On my old ipod when I connect it the computer it mounts on the desk top and I can copy text from my word processor to the ipod.
I have not been successful doing this on the itouch. The itouch does not mount on the desk top. How do you transfer or copy text from the computer?
Thank You
Dcik

Phi Guy wrote:
Not true. I found that if I look under the Mail app, not at my inbox but further down there is a Notes section, and there are all of the notes I have on my PC at work! So I can put any text I want in a note (not using the Notes app that comes with the upgrade) and after syncing it will be there!
Are you syncing to Exchange (or something) using MobileMe? Is that Notes folder just a folder you have in your work email? Along those same lines, but without having you use MobileMe, you could create a Notes folder in any mail account and put your notes in there (via emails). My regular mail account doesn't have a "Notes" folder, so I have to guess that this is because of your own mail account and how you manage it.
I still don't think there is a true app that will sync notes (without using email). BUT it would be hugely useful, so if someone knows how to do it, that would be great

How do I justify text at the end of a column

How do I justify text at the end of a column In Pages?
Also, is there any way to sort a document (alphabetically by the first word of each paragraph) that is not in a table?

RTPLaw writes:
How do I justify text at
the end of a column In
P    a    g    e    s     ?
Also, is there any way
to   sort a document
(alphabetically by the
first   word   of   each
paragraph) that is not
in         a         table?
No. Like Peter and Walt, I wonder why you'd want to, considering the appearance of such manipulation, illustrated above. Is this a requirement for some specific type of document?
Regarding your second question, there's no way to do this using Pages as it comes out-of-the-box (or in the downloaded edition). But you can sort the paragraphs of a document alphabetically using WordService, freeware from Devon Technologies. The link will take you to their download page. Scroll down to the Freeware section and the download link for WordService.
Regards,
Barry

How Do I Wrap Text Like the iOS Camera App?

Hello. I am in yearbook, and I have been challenged with designing the cover of the yearbook, and I have been having a few problems along the way. One of these problems is to wrap text. Specifically, I'm stuck on how I would wrap text like the iOS camera app on the bottom of the screen. The words seem like they are wrap around a 3D object to give it that effect, but I can't really tell. If anyone can help me, it would be greatly appreciated.

JJMack wrote:
There is a big difference between being a casual user than real work or development. I own a iPod its a great MP3 player and a device I can display my pictures on out of my pocket. I'll even Facetime my kids at time to see my grand kids or help fix something. My wife has a mini iPad for quick internet access and quire music and uses her iPod to entertain our two year old grandson with games. She uses a Canon 1D mark 4 and I a Cannon 1D mark II. The only use the iPad and iPod cameras get is Facetime. No iOS apps are use to work on images they have no value when you have Photoshop. The iPod is better for displaying image then the iPad mini it has a 3:2 aspect ratio display and travels better the the mini iPad which has a 4:3 aspect ratio display. I also crop image for display on wall mounted HDTV. The iPad is better for casual internet access then the iPod. All our kids have iPhones and they all use computers either Mac or PC for work and internet access. When you have a Unix or Windows why would you want to touch an iOS device for work or serious internet access. Apple mobile devices are convenient for casual use and grand kids don't get that dirty finger painting on them as they do using real paint. Nothing of real value is maintained on an iOS device.
Well...there's Photoshop Touch and Photoshop Mix as well as Lightroom Mobile. It could be argued that they're don't exactly mirror their desktop cousins, yes, but they weren't meant to be. They were meant as extensions to the desktop experience. (e.g., Lightroom Mobile lets one work with the RAW images they have in their Lightroom desktop collections.)
The more powerful Windows tablets can run Photoshop desktop (like Photoshop CC) too.
@bluebocat: Are you looking for text with a perspective? Like it has a vanishing point? As if it was turned in a certain direction in 3D space?

In popup step how do I get the "text on the button" in the report rather than button index?

(1)
How do I configure the POPUP step in "SEQ MAIN.seq" to execute the second
step (IS OUT PUT IS 20?) in "SEQ 1.seq" when "IS OUT PUT IS 20?" button
hit and execute the third step (IS OUT PUT IS 30?) in "SEQ 1.seq" when "IS
OUT PUT IS 30?" button hit.
(2)
In popup step how do I get the "text on the button" in the report rather than button index?
File attached
Attachments:
test_stand.zip ‏32 KB

The handle to the Step.Button1Label gets you the data, but there are several ways to get it into the actual report.
The easiest is to use the reporttext.
In a post expression, you can use something like
Step.Result.ReportText = Evaluate("Step.Button" + Str(Step.Result.ButtonHit) +"Label")
and then the default report generation will include it in the report. Otherwise, you need to get the text into the Resultlist by various means (check the user manual, or the TestStand II customisation course) and handle the report generation yourself inside of the appropriate sequence in the process model.
Just my 2cents
S.
// it takes almost no time to rate an answer
Attachments:
IncludeButtonTextInReport2_0.seq ‏18 KB

How to rotate a text in the adobe reader for mobile ios ?

how to rotate a text in the adobe reader for mobile ios ?

There's no rotate command to rotate the document. Instead, rotate the iPad. If it doesn't rotate, turn off the Rotation Lock switch on the side of your iPad.

How to attach a text in the center of the Ellipse using JXML ?

How to attach a text in the center of the Ellipse using JXML ? Can we use labelFor="$topEllipse" ?
<StackPane fx:controller="myfxml.ArchiveLogsController" id="Login" xmlns:fx="http://javafx.com/fxml">
<children>
<AnchorPane>

<maxWidth><Double fx:value="-Infinity"/></maxWidth>
<maxHeight><Double fx:value="-Infinity"/></maxHeight>
<children>
<Ellipse fx:id="topEllipse" centerX="100" centerY="100" radiusX="50" radiusY="10" strokeWidth="2" stroke="#FF0000" style="-fx-fill: linear-gradient(to right, white 0%, red 100%);"/>
*<Label fx:id="ArchLogs_lb" text="My Ellipse Label" />*
</children>
<properties>
<backgroundColor>
<Color blue="1.0" green="1.0" red="1.0" />
</backgroundColor>
<elementLockSel>
<Boolean fx:value="true" />
</elementLockSel>
</properties>
</AnchorPane>
</children>
</StackPane>

I'd suggest putting the Ellipse and the Label in a StackPane.
I wonder why so many people call it JXML?
It is so strange - I guess the JXML name just seems more natural to some people, though I don't know why.
I think Greg is right and that labelFor is not what you want:
http://docs.oracle.com/javafx/2.0/api/javafx/scene/control/Label.html
"Labels also are useful in that they can have mnemonics which, if used, will send focus to the Control listed as the target of the labelFor property . . . A Label can act as a label for a different Control or Node. This is used for Mnemonics and Accelerator parsing. This allows setting of the target Node."

How do i put text in the picture

how do i put text in the picture ?

In addition to the apps already mentioned here are some that can add text to a photo:
Some Image Editors That Support layers:
Photoshop Elements 11 for Mac - $79
GraphicConverter - $40
Rainbow Painter - $30
Imagerie - $38
Acorn - $50
Pixelmator - $60
Seashore - Free
GIMP for Mac - Free
Xee 2.1 - free

How can i highlight text in the Adobe Difital Editions?

How can i highlight text in the Adobe Difital Editions?

You have to remember that Digital Editions was never designed to have 'text
editor' capabilities. BTW: Bluefire and Overdrive also have such
limitations. Put in another frame of reference, DE presents you with the
ebook, as you would be presented with a physical printed book.
==============

How I know my answer to the security question, How I know my answer to the security question

How I know my answer to the security question, How I know my answer to the security question

Click here for information. If you can't reset them through the method described in that article or by sending yourself a rescue email(the email may take a few hours to arrive), contact the iTunes Store staff via the link in the 'Additional Information' section.
It isn't possible to create a rescue email address without correctly answering two of the questions. Nobody on these boards can reset them for you.
(94895)

How does one put text on the spine?

I'm a little confused about the difference between the version I'm creating and the template I start with. I start with a template, then resize and mess with the arrangement of the pictures. I move text boxes. All seems okay.
I put a colored background on the front and back cover (by inserting a specially made pdf from Pages, a gradient color). The back spine remains white, and blank. How can I add text to the spine? And is there a way to have the color from the background bleed over the spine?
Ben

I certainly don't know how it was constructed, but I suppose the form was intended for people that use Word. If you were using Word, you would just select the "insert" key (or something - I forget) and type away. The text would type above the line. I thought maybe there was something like that in Pages. I find myself getting very frustrated using Pages and Numbers. They really aren't that easy to use. Word and Excel have them beat.

Question: How to assign number ranges to the Official Excise Document Numbe

Question: How to assign number ranges to the Official Excise Document Number
Field name is: EXNUM, table name: J_1IEXCHDR
SAP CIN
Dear expert,
I will briefly explain the scenario:
I have created return po.
Process MIGO w.r.t. return PO- Material document generated.
Process: J1IS - excise invoice other movement create.
--> Now I want to print the document --> I m trying with T-code J1IP --> entered all the required data --. Used out put type - J1I0
But I am not getting the list of document for printing and even print is not coming.
There is no print document getting for a printing.
When I checked in an above said table (mentioned in question), I found that for transaction type OTHR, there is no number ranges defined for official document no.
And because of this reason I m not getting any document in the print.
Can you Pl extend Ur help and Pl suggest me where (path or transaction) the number ranges can be maintained for the official excise document No.
Thanking you all n advance and expecting your earliest response.
Regards
om

Dear Friend,
J_1IEXCHDR this table stores the all the excise documents created while excise transactions are done ,
for that Goto j1i9 or SNRO in these transaction you maintiane the number ranges for the
J_1IPLA2     PLA part II number range object
J_1IRG1     RG1 Number range object
J_1IRG1_T     No. Range for RG1 - Excise group / Material
J_1IRG23A1     RG23A part 1 no. range object
J_1IRG23A2     RG23A part II number range object
J_1IRG23C1     RG23C part I number range object
J_1IRG23C2     RG23C part II number range object
J_1IRG23D     Folio Numbers for RG 23D
like these lot of objects are there for them u maintiane the no. ranges
Regards
Pramod

How to sending simple text in the mail body

Hi friends,
             How to send simple text in the mail body through ABAP code
   plz send me the related code and setting for that mail.
Thanks&Regards,
Srinivas

try this...
FORM send_file_as_email_attachment .
DATA: objtxt LIKE solisti1 OCCURS 10 WITH HEADER LINE.
DATA: objpack LIKE sopcklsti1 OCCURS 2 WITH HEADER LINE.
DATA: objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE.
DATA: reclist LIKE somlreci1 OCCURS 5 WITH HEADER LINE.
DATA: objbin LIKE solisti1 OCCURS 10 WITH HEADER LINE.
DATA : i_body TYPE soli_tab WITH HEADER LINE.
DATA: it_attach LIKE it_display1 OCCURS 0 WITH HEADER LINE.
DATA: doc_chng LIKE sodocchgi1.
DATA: tab_lines LIKE sy-tabix.
DATA: att_lines TYPE i.
DATA: lv_lines TYPE i.
DATA: file TYPE string.
data: g_datum like sy-datum.
data: g_datum1(10) type c.
DATA: len TYPE n.
LOOP AT it_email.
    CLEAR : objpack,
            objhead,
            objbin,
            objtxt,
            reclist.
    REFRESH: objpack,
             objhead,
             objbin,
             objtxt,
             reclist.
    g_datum =     sy-datum - 1.
    concatenate g_datum6(2) '.' g_datum4(2) '.' g_datum+0(4) into
    g_datum1.
doc_chng-obj_descr = 'Aged Stock more than 45 Days'.
    CONCATENATE 'Aged Stock more than 45 Days' '-' it_email-vkbur INTO
    doc_chng-obj_descr.
    CONCATENATE 'Please find enclosed Aged Stock Details ( >45days ) report as on'
    g_datum1
    INTO objtxt-line SEPARATED BY space.
    APPEND objtxt.
    objtxt-line = ' '.
    APPEND objtxt.
    objtxt-line = 'Regards'.
    APPEND objtxt.
    objtxt-line = 'LIS SAP Projects'.
    APPEND objtxt.
    objtxt-line =
    'PS: Pls send feedback for futher improvements to SAP office.'.
    APPEND objtxt.
    DESCRIBE TABLE objtxt LINES tab_lines.
    READ TABLE objtxt INDEX tab_lines.
    doc_chng-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objtxt ).
   CLEAR objpack-transf_bin.
    objpack-head_start = 1.
    objpack-head_num = 1.
    objpack-body_start = 1.
    objpack-body_num = tab_lines.
    objpack-doc_type = 'TXT'.
   objpack-obj_name = 'Run_prog'.
   objpack-obj_descr = 'Agestock.txt'.
   lv_lines = tab_lines.
    APPEND objpack.
*CONCATENATE 'Plant'   'Material Number' 'Qty(More than 45days)'
*'Amount' INTO
       it_display SEPARATED BY space.
       append objbin.
       clear: objbin.
    CLEAR:it_display2.
    REFRESH it_display2.
    it_display2-werks = 'Plant|'.
    it_display2-matnr = 'Material Number'.
    it_display2-qty = '|Qty > 45 days'.
    it_display2-amount = '      |Amount'.
    APPEND it_display2.
    it_display2-werks = ''.
    it_display2-matnr = ''.
    it_display2-qty = ''.
    it_display2-amount = ''.
    APPEND it_display2.
    CLEAR : it_display2.
    sort it_display1 by amount descending.
    LOOP AT it_display1 WHERE werks = it_email-vkbur.
     AT FIRST.
*CONCATENATE 'Plant    '   'Material Number' 'Qty(More than 45days)'
*'Amount' INTO
       objbin-line SEPARATED BY space.
       append objbin.
       clear: objbin.
     ENDAT.
      CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
        EXPORTING
          input = it_display1-matnr
        IMPORTING
          output = it_display1-matnr.
      it_display1-qty = TRUNC( it_display1-qty ).
      MOVE-CORRESPONDING it_display1 TO it_display2.
      APPEND it_display2.
      CLEAR:it_display1,it_display2,objbin.
      CLEAR:it_display1.
    ENDLOOP.
    objbin[] = it_display2[].
    DESCRIBE TABLE objbin LINES tab_lines.
    objhead = 'Suug'.
    APPEND objhead.
    objpack-transf_bin = 'X'.
    objpack-head_start = 3.
    objpack-head_num = 1.
    objpack-body_start = 1.
    objpack-body_num = tab_lines.
    objpack-doc_type = 'RAW'.
    objpack-obj_name = 'Run_prog'.
    objpack-obj_descr = 'Agestock.txt'.
    APPEND objpack.
    reclist-receiver = '[email protected]'.
    reclist-rec_type = 'U'.
    APPEND reclist.
=====================================================================
    CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
      EXPORTING
        document_data              = doc_chng
        commit_work                = 'X'
      TABLES
        packing_list               = objpack
        object_header              = objhead
        contents_bin               = objbin
        contents_txt               = objtxt
        receivers                  = reclist
      EXCEPTIONS
        too_many_receivers         = 1
        document_not_sent          = 2
        operation_no_authorization = 4
        OTHERS                     = 99.
    CLEAR : it_email.
ENDLOOP.
ENDFORM.                    "send_mail
Message was edited by:
        Sugumar Ganesan

How to Including custom text in the step "User Decision"

Hi All
Please help me in this regards I got problem
How to Including custom text in the step "User Decision"
Regards
Poonam
Edited by: Julius Bussche on Feb 2, 2009 1:59 PM
Please use the corect forum, meaningfull subject titles and use the search before asking questions

Hi Poonam,
If I understood your problem correctly...
When you create a user decision a screen will appear.
In the decision tab under Title you can give your custom text.
Even if you want to give some variable (value of which will be determined at runtime) you can give that as well.
Like you have created a container for BOR objects MAT_DETAIL, in that object there is a field MATERIAL.
You can define your custom text as below:
Title: Would you like to create new material or display material &
Parameter 1: &MAT_DETAIL.MATERIAL&;
In Title you can give as max. as 4 &(ampersand). And each & will be replaced by each Parameter at runtime in same sequence.
In parameters you use to select the container defined by you earlier.
Hope this will help.

Newbie question: How do I cange text on the buttons from a template?

Similar Messages

Maybe you are looking for