Newbie question: How to share large QT movie files exported from FCP X?

Well, I've navigated through FCP X for the first time and I now have 16 QuickTime movie files I have exported from FCP X. Each file is a song from a live band performance. The files are:
- Apple ProRes 422
- 1920 x 1080
- 24-bit
- Frame rate 29.97 fps
Now I need to share these files with the band members. They will use them for two purposes:
- Watch, as feedback on their performance. In this case, I'd like to preserve the quality as much as possible
- Put some of the movies on YouTube, where quality will be lost, of course. They may post only short clips from the songs.
These 16 .mov files total 115GB. The smallest is 6.5GB, the largest is 13.9GB.
The quality of the movies is fantastic, both video and audio. I cringe to think about degrading the quality............but I have the practical problem of how to get the files to five different band members.
I normally distribute audio files I've mixed in Pro Tools via DVD-R discs, but the files are much smaller.
What are my options for sharing the files?
Do I need to use an application like Compressor to compress the files (ugh) to get them onto multiple DVD-R's?
I would assume this is a common problem that all FCP X users deal with.

I strongly recommend you to use Compressor. It is easy to use and there a lot of presets.

Similar Messages

Cannot open .mov files exported from FCP X 10.0.9

I am trying to export an H.264 version of a 422 file for use on Vimeo. When I go to my desktop and click on the exported file to check it I get a message that says the file type is unsupported.
Neither my old nor new Quicktime programs will open the file. I've also failed at directly uploading the clip to Vimeo.
I need help!
My operating system is 10.7.5, would this cause the error?
Thanks,
Tyson

Exporting from 10.0.9
I used the Share button and tried both "Master File" and "Export File" to save an H.264 version to my desktop.

How do i send an html file exported from muse as email blast with images and live links?

My question it:
How do i send an html file exported from muse as email blast with images and live links?
I have designed a "website" in adobe muse and exported it as an html file. I am not sure how to send my .html file in an email!
Best,
Nicole

Unfortunately, the answer is, you don't. The requirements for HTML displayed in an e-mail reader are very different than those for HTML displayed in a browser. The output of Muse won't work as an HTML e-mail. You could upload the Muse site as a website and provide a link to it in an e-mail, but the HTML generated by Muse is not suitable for direct display by an e-mail program.

Why won't .MOV files export from Lightroom?

Why won't .MOV files export from Lightroom?

The will.
Or at least they can, and do, sometimes, if you have good MOV karma..
Why not supply a little more info, like:
* Which OS
* Which version of Lightroom
* History of MOV files.
* Export format.
* Do other video types export OK
* How many different MOV files have you tried - all with the same history?
and of course:
* What, exactly, happens, when you try?
Rob.

Aspect ratio issues in iDVD with mov files exported from FCE

Please help. I believe this is an iDVD bug. I have found some relevant discussion of it on online forums - but have not found a solution that works for me. I am looking for a workaround.
http://discussions.apple.com/thread.jspa?threadID=1356500&tstart=31
PROBLEM STATEMENT:
My 4:3 movies, exported from FCE in QT-with-conversion formats (any 4:3 format) - appear in iDVD with gray side-pillars (as expected for 4:3) AND with a black line (letter-boxing) at top and bottom - as would be for 16:9. It appears the aspect ratio is also distorted i.e. 16:9. (The iDVD project is set to 4:3.)
1- A 4:3 mov file exported from FCE using Quicktime Movie format (no conversion) does not have the problem, but I cannot de-interlace the video using this export mode.
2) A 4:3 mov file exported using QT-with-conversion mode (any 4:3 format) DOES have the problem. I need to use this mode in order to get de-interlace.
(Exception: 640x480 VGA mode does not have the black lines, and it displays correctly in dvd player on my computer screen - but on the TV screen, it crops content from the top and bottom of the movie, so this is not an option.)
3) In Finder, if you click on mov file exported QT-only (no conversion), it opens in the FCE viewer. If you click on mov file exported in any other 4:3 mode, it opens in Quicktime viewer (i.e. there is absolutely something different in the header/ID of these files.)
4) All mov files, regardless of export mode, show correctly in Quicktime viewer - no black line, no distortion. The problem does not occur outside of iDvd.
5) I tried passing the QT-with-conversion mov files through an Inverse-Anamorphicizer (per suggestion on forum - this apparently fixed the problem for some people) but the resulting output mov (i.e. the inverted product) still had the same problem.
I am, so far, left with this trade-off: Give up the de-interlacing, or live with the letter-boxing/ distortion. Neither is acceptable.
I am looking for a workaround:
1) A way to export de-interlaced 4:3 mov from FCE that shows in correct ratio in iDVD
2) A way to "convert" / re-head mov file after exported so that it displays corrrectly (inverse-anamorphicize) so that iDVD reads it correctly
3) Can the mov be de-interlaced after the fact (so I could use QT export without conversion)?
4) Something besides iDVD to put this together - that doesn't have this problem? (I like and want to use the iDVD menu/theme.)
5) Other?????
I also notice that all the QT-with-conversion mov files are 1/3 to 1/2 the size of the QT-only mov file, which is valuable and preferable to me. (I don't see any quality difference in the display...)

In the Preview window > top frame > middle button
do you have correct for pixel aspect ratio checked or not?
!http://i533.photobucket.com/albums/ee340/gogiangigo/Picture1-4.png!

How do I use m2ts movie file format from my old pc with FCP on my mac?

I have recently moved from a PC to a iMac. I have a large number of Sony AVCHD movie files, which were imported to my PC and are in the m2ts file format on my PC. The original files on my Sony camera were deleted so these files are now all I have. Also, for each movie clip on my PC there are 3 files....a very large m2ts file along..... with two very small file....one is a .modd file and the other a .moff file.
I now want to use these m2ts files (and if needed possibly these other two smaller files) on my Mac make movies with either iMovie or Final Cut Pro. and don't know how to import them or convert them for use on my Mac. Can anyone help?
One final question. Can FCP author DVD's or is separate software required. Apple has discontinued iDVD for iMovie (which I find rediculous) and so I'm worried they don't support making DVD's with FCP.
Thanks

Although I don't use Toast I know lots of people who do and like it for a variety of purposes; for example, many people author in DVDSP and burn disks using Toast. But there are a lot of versions and they have differing features and capability. Do a search in these (or iDVD) forums you'll find plenty of info. Don't know about the other app. Again, if you ask Apple, they may come through with iDVD…they have for others.
Clipwrap quality limitations? Try the trial and test the results for yourself. As far as I know the trial is fully freatured but there is a one minute clip limitation (which doesn't apply to the paid version).
Good luck.
Russ

How to sync sound with movie when exporting from iMovie

i have problems with sound synchronization with movie. mostly is movie delayed few seconds behind sound. also sound is repeatedly missing - under certain frequency. videos are prepared in iMac iMovie and exported in to the file and stored on synology. how to fix this trouble before exporting from iMovie?
playing movie on imac works without problem

I have a collection of Apple Support documents about passwords, some of which might be of help ...
iOS: Forgot Passcode or Device Disabled
http://support.apple.com/kb/ht1212
iOS Passcodes
http://support.apple.com/kb/ht4113
Find My iPhone, iPad, iPod a Touch or Mac
https://www.apple.com/support/icloud/find-my-device/
Find My iPhone Activation Lock
http://support.apple.com/kb/HT5818
Find My iPhone Activation Lock: Removing a Device from a Previous Owner's Account
http://support.apple.com/kb/ts4515
Apple release Tool to check the Activation Lock Status of iOS Devices
http://www.idownloadblog.com/2014/10/01/activation-lock-status-check/

How do i upload a movie file mp4 from my computer to my ipad

I have movie files from a dvd which i converted to MP4, i have been trying to upload the movie file from my PC to my Ipad. I tried doing this in video and photo, but nothing happens. I am currently running the latest Itunes and OS, please help
Thank You

iOS and iPod: Syncing photos using iTunes
http://support.apple.com/kb/HT4236
Another way. You can use a USB flash drive & the camera connection kit.
Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import. (You can not export using the camera connection kit.)
Secrets of the iPad Camera Connection Kit
http://howto.cnet.com/8301-11310_39-57401068-285/secrets-of-the-ipad-camera-conn ection-kit/
 Cheers, Tom

No Video/Only Audio On .mov files exported from Final Cut

I've exported some .mov files from Final Cut on another computer, moved them to this one, and only the audio will play when I try to play them in any program. QuickTime, VLC, MPEG Streamclip, Real Player--nothing will play the video. I either get a black screen or a white screen. I even tried converting a portion of the video to a different file type to see if that could work.
Anyone know what I could do?

Yes, you are correct--it does play fine on the computer I originally had the file on. But I just checked and I do have perian already.
I'm wondering--I exported the file in Final Cut Pro 6, and on my computer I only have Final Cut Pro 5. Could that possibly have any effect on why it might not be working?

Problem with .mov files exported from Quicktime working with iMovie

Since iMovie won't input .mpg files, it has been my practice to use Quicktime Pro to convert the .mpg to a .mov file and then import the .mov file into iMovie. With Quicktime 10 (no longer a Pro version), when I follow this procedure I get a .mov file that iMovie refuses to import. Why is this?

I am having the same issue. Just purchased QT7 Pro. Converted .3GP format to .mov and cannot open in iMovie. Have you found an answer?

Newbie question: How do I cange text on the buttons from a template?

I don't mind when it takes a while to figure out stuff that's really complicated, but it kills me when I can't get something that should be (and I'm sure is) easy. I have my first downtime since getting my Final Cuts bundle and am trying to figure out DVDSP using a menu template to start. I've managed to import all my assets, manage the navigation, change the title, add a slideshow, do looping and linking, and everything plays fine in the simulator. What I can't do is change the names from "Button 1" etc to appropriate names, ie "contact". I'm sure it's something really simple, but I'm not finding it. Any help out there?
G5 Quad Mac OS X (10.4.5)

Oh, inspector - text. OK, second time I've posted a question here after working forever on it then found it as soon as I posted.
G5 Quad Mac OS X (10.4.5)

How do I get QuickTime .mov files transferred from my Mac onto my PC to play?

I recently transferred a bunch of QuickTime videos from my Mac to my PC using an external hard drive. When I tried to open to files on my PC, the files were recognized as QuickTime files but they would not play. It said the files were of a type that quicktime does not understand. Do I need some sort of Mac to PC file converter?

Maybe this article will help.

How to load a huge data file (export from mysql) to an oracle table?

I have a data file which contains 1.3G bytes table data from mysql. It's format is csv.
How can i load these data to an oracle table in java way?
I thought about using sqlldr. But it requires a oracle client which may not be permitted in my environment.
If i generate "insert " statement and use batch update the batch update will stop if it comes across an exception when executing the insert one by one. I find no "insert ingore" statement in oracle like mysql.
Is there anyone can give me a solution with high performance? It's urgent and Thanks!

hsy541 wrote:
I have a data file which contains 1.3G bytes table data from mysql. It's format is csv.
How can i load these data to an oracle table in java way?
Why must it be a Java way? The point is just to move the data.
I thought about using sqlldr. But it requires a oracle client which may not be permitted in my environment.
Why not just import the .csv file into Oracle? I'm sure there's a script or utility that will do it.
If i generate "insert " statement and use batch update the batch update will stop if it comes across an exception when executing the insert one by one. I find no "insert ingore" statement in oracle like mysql.
You want to turn off transactions? I'm not an Oracle expert, but I'd be shocked if there was something you could do in MySQL that didn't have an analog in Oracle. Find a better resource, like somebody that actually knows Oracle. Who set up that database for you? Consult with them.
Is there anyone can give me a solution with high performance? It's urgent and Thanks!Urgent to you....
%

Trouble importing .mov files coming from FCP/Mac

Hello,
My friend works on Final Cut Pro on Mac. He gave me rushs from vidéos he imported (and the exported) on FCP.
An example of these files is here :
https://docs.google.com/leaf?id=0B9S9yK830UrNM2QyZTBhYWEtYjM2NC00NWNiLThiZTktOWQwZGNjNzY1O GMz&hl=fr
There are several file sizes 1280 / 720 and others.
Codecs are : Codec : MPEG-1/2 Video (xdva)
Codec : PCM S16 LE (sowt)
I can read the files with VLC on my computer.
When I import the files on Premier Pro CS5... it crashes the program.
I went through the forums... tried to download more codecs via Klite Codec Pack. I also installed Calibrated(Q) XP Options... but i'm not sure i used it right.
In the end, I am unable to do anything... and I am extremely frustrated, and MAD at Apple and it's never-compatible formats.
Anyone can help ?
Thanks.

Hi,
I downloaded your file and I can also confirm that it freezes both PremierePro CS5 and CS5.5. It just freezes when trying to create peak file.
I also have Calibrated(Q) XP Options.
Quicktime Pro tells that it is XDCAM-EX 720p50 1280x720
With Quicktime Pro you can export it to other format, I tried Avid DNxHD 720p/50 and Premiere opened it nicely.
But 300 files...
pena

Color shift when converting .mov file exported from Macromedia Flash

I'm trying to convert quicktime file exported from Flash into any other format using Quicktime Pro 7.0.4 and I get substantial color shift. Here's the picture:
http://img525.imageshack.us/img525/1518/screen3ov.jpg
On the the left is the initial file, and on the right is what I get. I've tried all codecs setting (targa, jpeg2000, animation) but no luck. Please help!

I am in the midst of trying to figure out the opposite : Flash to After Effects. I am betting that this is an issue of 'color profile' attached to the images and the gamma settings in that profile. RGBA is only part of the story - color profile is all the rest of it. Eye Dropper doesn't tell you the color profile attached to the image.

Newbie question: How to share large QT movie files exported from FCP X?

Similar Messages

Maybe you are looking for