[newbie question]: IDE's used in industry?

Hello, I'm learning Java at home (using Kawa IDE - student edition), and would like to know from professional Java developers which IDE's are used in the software industry. Thanks very much for your time,
Sanjay.

Hi,
Did you try using the "search" instead of the "new thread" button?
There were many discussions about IDEs so you can read lots of opinions.
Mike

Similar Messages

Newbie Question: Benefits of Using Book Document?

I have a novel in MS Word. I've seen that I can get greatly improved typography if I import it to InDesign.
I notice that InDesign has a Book document. I can put each chapter of my novel into individual .indd files, and then include each of these files in the Book document. So far so good.
My novel is only 266 pages long, including front and back matter. Would it be easier to just use one single .indd file?
In other words, what are the benefits of using the Book document?
Thanks very much in advance to all for any info.

Arïel's advice is spot-on. I am adding some comments only for the benefit of the people who might find this thread in the future.
It's occasionally to my advantage to share out chapter files of a long doc in a Book file to a number of InDesign operators, so we can complete a large project collaboratively in a very short amount of time. Each time I look at myself in the mirror and say, "Would I rather use a Book file, or pull an all-nighter and do the whole thing myself?" I feel I've been pretty lucky, in that only once has a team-effort Book file project blown up in my face and required the all-nighter anyways - I spent the night rebuilding the Book file over and over again, trying to get it to paginate correctly.
To avoid any potential sluggishness, though, my only recommendation
would be to make sure that each chapter is in it's own story. Try to
avoid having the entire book threaded as a single, long, 200-page story
and you'll be alright. In fact, on my current computer (i5 with 8 GB
RAM) even that is no longer an issue.
This is absolutely true of your book, Vik. I've handled a variety of handbooks, manuals, and other kinds of document that had complicated formatting (tables and charts and dozens of text frames with variables and xrefs and No Break and etc.) at the end of the book - in those cases it was to my advantage to keep that complicated stuff in a separate story so that when I was re-ragging chapter 1, the stuff in Appendix B wasn't constantly re-flowing and bogging down my machine. But a novel? Any decent machine with specs like Ariel's could handle a longer story than that.
Oh, and I don't recall ever having an InDesign file go bad on me. Maybe I'm just lucky
Yup, you're lucky. OTOH, I bet that you don't have very many clients who revise their books 4x per year, who have been using the same file since PageMaker 5.0.

Newbie question: Should I use iDVD o iMovie?

I use a Sony camcorder with the mini-DV tapes. I have about 20 old tapes I'd like to turn into DVDs. This is my first time using iDVD or iMovie.
I'd like to keep things simple: Download the movies to my iMac, make a handful of chapter points and burn to DVD.
Not interested in adding soundtracks, trimming the clips, etc etc. Just keep it simple.
Each 1 hour tape typically has about 8-12 individual clips of a few minutes each (all video is my little kids). I want to be able to access each clip via an upfront menu selection (like a normal movie DVD).
Should I use iDVD to do this or iMovie??
If iDVD, what are some starter tips for me. Thanks!!

I am trying to download imovie06 but can only find updates? How do I find the actual program
More info here.
http://www.macworld.com/article/138476/goodbye_imovie6.html
http://arstechnica.com/apple/news/2009/01/imovie-hd-fading-into-the-ether-as-app le-removes-download.ars

How can we configure or use SAP industry solution in ECC IDES

Hi
Hope all are fine and having a nice time. i have read almost all posts relating to above topic, i want to ask from you people, is there any way to use multiple industry solutions in IDES system? because IDES is a learning solution not production and it should open all learning areas. I have seen mant posts but transaction "SFW5" doesn't fullfill our requirements.

Thanks a lot Bill for your kind answer
i would like to know that how can we active desire IS during IDES installation? because while we install ECC IDES, there is no option to active desired IS. by default it set to FI/CX.
Thanks
Usman Tufail

Newbie Question: How much computer do I need?

Newbie Question:
I would like to use MainStage 3 in a live performance environment to play bars, parties, etc. I'm not looping, using it to playback recordings, processing outboard equipment or vocal processing. I want to stop carrying Rolands, Nords, Korgs, etc and get to a controller and a rack with a Mac Mini in it.
I tested a download of Mainstage 3 on my home Mac Mini (late 2012, 3.5 Ghz i5, 4GB RAM, 500GB drive) and it seemed to run fairly well. $30 well invested so I trekked forward... I purchased a Mac Mini (late 2009, 2.52GHz Core 2 Duo, 6GB RAM, 128GB SSD) for $200. I started to do more elaborate keyboard setups to see how the CPU would hold up. It typically runs from 30% to 50% of capacity (CPU and Memory) It actually boots and runs better than the i5. I hear the occasion gitch, but it actually seems to be getting better in time (or I'm rock and roll deaf.
I got a rack, an Airport Express, a Radial USB interface and a Nektar Panorama P6. It's starting to get expensive, but I'm emboldened by the actual quality for the sound and the flexibility of arranging for live performance. What used to take me two and three keyboards to play, I can now fit on one performance patch.
OK, now the question... am I at the limits of this little Core 2 Duo? Should I upgrade the i5 with more RAM and a bigger SSD and use that? Should I get a new(er) i7 and bite the $1,500 bullet for the additional RAM and SSD?
I see that most of you are running pretty nice Macbook Pros with i7 and lots of everything. My needs are modest; am I OK?
BTW, I want to run a Mac Mini in a box because I don't want to carry a laptop out in the open. If I was doing bigger shows I wouldn't care but I play some rowdy bars and constantly have folks hanging off me while I'm playing. It's fun, but hard on gear. If you can't drop it or dip it in beer, it won't last long where I work.
Matt Donnelly

Rule of thumb: newer and faster is better. But, depending the complexity of your needs you may be OK with an older Mac. Some glitches that happen in a live performance are due to loss of communication with USB or Firewire inputs, so make sure they're secure. I recently upgraded from a 2010 Mac Mini 2.6 dual core with 16 GB RAM, which was used live for nearly four years, to the latest Mac Mini 3.0 i7 with 16 GB RAM and a 500 GB SSD. I was getting an occasional stuck note with the older one. The new one is rock solid. Some of my patches may have up to a dozen channel strips mapped to three keyboards. The Mini is mounted in a rack next to a MOTU Ultralite Hybrid. It is a good idea to map a panic button on your keyboard to controller # 123(all notes off). Also, you might want to invest in a battery backup power supply(APC, Cyberpower, etc.-$40-$60) to protect your Mac against power loss, which can damage you hard drive.

Multiple version of JRE in company..How to manage? (newbie question)

Greetings..this is a newbie question
We have 48 versions of JRE running in on XP IE6 in our company.
Some version beat up other JAVA applications.
It's a mess.
How can anyone manage this many versions?
Can we consolidate down to a few versions?
I saw some posts on changing the JRE dynamically or perhaps using a wrapper with a product from "sourceforge".
Are these viable?
Thanks in advance

We have 48 versions of JRE running in on XP IE6 in
our company.
Some version beat up other JAVA applications.
It's a mess.can you elaborate on how some versions "beat up" other apps?
How can anyone manage this many versions?you don't, each computer should periodically upgrade (IMO) but you shouldn't care. if you do, tell your users to load the latest version
Can we consolidate down to a few versions?sure
I saw some posts on changing the JRE dynamically or
perhaps using a wrapper with a product from
"sourceforge".
Are these viable?i have no idea what this is, but I have doubts about your problem, if it exists at all

MailServer Newbie Question..

So my first time i setup a Mail Server with Mac OS X Server.
Everything works like a charme. I can send and receive emails internally. That means
i can send and receive emails from mac to pc and vice versa. Now my question.
How do I setup the Server to catch my external eMail adresses and send it to my internal account.
And how do I setup to send throw my server to the rest of the world without getting banned and
blacklisted
I how someone can write a small tutorial for me or can post a link for this newbie question.
Thanx in advance..
mike
P.S.: Sorry for my bad English. But I am from Germany

how to configure the server to accept mail for my own domain ?
Any domain you want to receive mail for goes into the Local Host Aliases pane (in Advanced-> Hosting tab). However, you said that you can already send and receive internally so presumably you have it set up for a domain already? If this is not the same domain as you want to use, just change whatever settings you are using to your real domain. You can then test sending and receiving internally for your own domain but without changing your external (public) mail provider. When you are ready to change your outside mail server for your own one, get the public MX record changed so that all external mail starts getting directed to your own server.
how to get the public DNS record (MX Record)
If you have a 'real' domain then someone is hosting your DNS for that domain. THis is probably whoever you bought the domain from. You need to get them to change your MX record (or the IP address for the host name record which the MX points to - see my first post).
Is it really impossible to catch the external email-accounts with the server via pop.
my idea behind that is to synchronize the external email accounts with the email accounts on the server..
I have never really looked into getting a mail server to use a pop download from another external mail server - it may be possible by manual configuration but it never made sense to me. Why have two mail servers in a 'chain'? Basically, the public will see only one server responsible for your mail (via MX record) - you have to decide whether you want to leave this with your external provider or take the responsibility yourself.
Your configuration for the incoming mail seems to me like you would change the
external email server completely to my internal server.. right ??
Correct. Once the public MX record is changed then all other mail servers will send to your server and not your current provider. You can always revert back by changing the MX record back to your existing provider (as long as your account is still open).
-david
Message was edited by: David_x

[SOLVED] cool'n'quiet & modprobe newbie question

This is probably very newbie question, but I have no idea what to do.
I want to have cool'n'quiet working on my amd64. I turned it on in bios, and downloaded powernowd.
When I type:
> modprobe powernow-k8
> powernowd
it works. I added powernowd to demons in my /etc/rc.conf but after restarting computer it doesn't work - I have to type both commands above again.
How to make my system not forget loaded module after restart?
Last edited by senjin (2007-08-24 19:49:31)

Use either /etc/modprobe.conf or the MODULES= array in /etc/rc.conf. I would have thought powersaved provided a config file from where you could pick a module to load though... sure there isn't one in /etc/ ?
Personally i would opt for powersaved, since i think it's more full featured (it's more a _power_ than a _cpu_ manager), but then again you may not care for anything other than controlling the cpu stepping/speed.

Newbie Question about FM 8 and Acrobat Pro 9

Hello:
I have some dcouments that I've written in FM v8.0p277. I print them to PDF so that I can have a copy to include on a CD and I also print some hard copies.
My newbie question is whether there is a way to create a PDF for hard copy where I mainitain the colors in photos and figures but that the text that is hyperlinked doesn't appear as blue. I want to keep the links live within the soft copy. Is there something I can change within Frame or with Acrobat?
TIA,
Kimberly

Kimberly,
How comes the text is blue in the first place? I guess the cross-reference formats use some character format which makes them blue? There are many options:
Temporarily change the color definition for the color used in the cross-reference format to black.
Temporarily change the character format to not use that color.
Temporarily change the cross-reference definition to not used that character format.
Whichever method you choose, I would create a separate document with the changed format setting and import those format into your book, create the PDF and then import the same format from the official template.
- Michael

Domain name settings - Newbie question

Sorry for a newbie question!
I am already pointing a domain name to web hosting for email account. Now, I need an application server to run ERP software and Oracle, and installing Solaris and Oracle need a domain name.
If I point my domain name to the server, how do I receive emails from web hosting???
Install an email server to the application server instead? What can I do if I want the same domain name? Any option?

Setting up a mailserver and making sure it doesn't suddenly turn into a spambox is not something you do with the use of a few commands. I suggest to dive into the Solaris admin guide on docs.sun.com and read up on e-mail and network services.
If that is asking too much of your time you'll be better off getting your ISP to handle all this for you.

Domain Name settings in Solaris - Newbie question

Sorry for a newbie question!
I am already pointing a domain name to web hosting for email account. Now, I need an application server to run ERP software and Oracle, and installing Solaris and Oracle need a domain name.
If I point my domain name to the server, how do I receive emails from web hosting???
Install an email server to the application server instead? What can I do if I want the same domain name?

Your questions are completely off-topic for the forum.
These SunOS forums are for questions on "how do I install my OS"
You particular question is in the "how can I install Solaris while using the CD drive" forum.
So, if you had a question on how to edit the /etc/inet/hosts file to establish a FQDN on the computer, then it might be appropriate for the forum.
Unfortunately, I don't have a clue on where to redirect you, except perhaps to the Sun Java Enterprise System suite of applications?

Newbie question - XML version, searching by artist

Probably quite a common problems - apologies for newbie questions.
I've changed the URL of my MP3s in my XML to a new location and refreshed my feed. Is there a way of seeing what version of the XML iTunes is using? (it takes around 24 housr to refresh, right?)
Also, when I'm searching for my podcast by author it's not coming up (<channel><itunes:author>) - is there a reason for this or a way to get it to show up when people search for the artist, other than doubling it in the title? (This works by the way, but I'd prefer not to!)
Thanks.

you can do it in just one loop, going through all the image
tags in index_content and for each tag fill the values of all four
arrays
for (i...) {
get the appropriate child of index_content
first_array[ i ] = value of first tag
second_array[ i ] = value of second tag
no need for multiple loops.
flash has functionality for xml files, but it helps to write
a little wrapper around it, to simplify programming, especially if
you work with xml a lot.. I wrote my for work, so I can't show it
to you, but it's not very complicated to do

SG200-08 Newbie Questions

I have recently purchased the SG200-08 Smart Switch, but I have a few "newbie questions" about it as I get started using it.
The on board firmware shows 1.0.1.0. Is that the latest firmware to the switch?
Do I need to enable IPv6 Auto Configuration and DCHPv6 in my switch settings to be ready for IPv6 as my ISP rolls it out down the road?
How do I go about changing the switch's username? I was able to easily change the password, but having issues getting the username to change.
Do I need to do anything about the LLDP-MED settings? What exactly is that?
How do I confugure the System Time Settings so the switch functions in my time zone (USA Central Time)?
Thanks a bunch for any assistance!

Hi Nathan,
My guess is that NAT is already on - you have one public IP address from your ISP. Your router will use NAT (network address translation) to allow multiple clients (and either dynamically assign them private IPs via dhcp or you set them statically) to connect to the internet using the one public IP. It also sounds like your RV042G is assigning both ipv6 and ipv4 addresses, and theres nothing wrong with that. Unless you have specific information re: ipv6 from your isp, however, I would suggest not worrying about it until you hear from them. Are your macs connected to the router via the SG200 switch? If so, it looks like its passing ipv6 just fine. UPnP is something completely different - thats with opening ports like you mentioned - its a way that your devices can communicate with the router to automatically enable the proper port forwarding for the device/application.
Regarding the username, create a new user account. I don't think you can edit the cisco user, but try deleting it after creating and testing a new user account..
I'm not familiar with the Polycom system, but I would leave the settings as default unless you are using true IP phones (rather than an ATA adapter). From a quick google of the polycom device, I don't think you will gain anything from LLDP/CDP as the handsets use regular cordless phone freqs. With my setup, we use cisco IP desk phones and cordless wifi phones, CDP makes life easy as the cisco access point, wifi phones, cisco switch, and cisco desk phones (connected via ethernet) see each other and know what they're dealing with automatically.
I don't see the SNTP setting for unicast / broadcast that you're looking at. For the switch to get the time from a sntp server, under administration -> time -> sntp settings, add a server, and then back on time-> system time, enable sntp server as the main clock source. What are you using as your sntp source? Do you have an internal sntp server? You don't need to enable dhcp on the sntp server.
May I also point you to the two manuals, I think they may be helpful: RV042G & SG200
Hope thats helpful.
Best,
David
Please rate any helpful posts.

WebDynPro Newb question

Hey All,
I need to begin working with WebDynPro. I have a couple of Newb questions:
1) I need to jump right in fairly quickly, so can anyone suggest any good documentation that could help me get the basics down about working with WebDynPro?
2) I loaded a Sample WebDynPro project into NetWeaverDev Studio, but I am unable to export this to our instance of EP on our Development Server. For a .par file its easy to do exports, but I can't for the life of me find where i go in NetWeaverDev Studio to do an export of a WebDynPro project. When I goto export in the WebDynPro perspective, it appears to only want to allow me to export locally, but I need to push to a different server. Can anyone help me with this?
I appreciate any advice and suggestions. Thanks All!!
Take care,
-Kevin

Hey Rich,
I have the Engine setup, but I do not get prompted for the SDM password, do I need to configure that somewhere? I get the following error when trying to deploy:
Jul 15, 2005 10:13:17 AM /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] ERROR:
[004]Deployment aborted
Deployment exception : Cannot determine sdm host (is empty). Please configure your engine/sdm correctly !
Thanks,
-Kevin

Vector file - newb question

After reading the user manual, I still don't understand how this works. Let's say I use Adobe Illustrator to draw a picture of sayyyyyyyy.......a kitty. Is there any possible way to take my kitty picture, export it out of illustrator as a vector file and import it into Motion so that motion can scale that image more or less indefinitely and maintain the crystal clear image no matter what the size. Like, can I zoom in on kitty's eyeball in Motion and still have the image look good?
Sorry for the newbie question but I just have not worked with vector images much. Thanks for any help.

The answer is yes. All you do is save the file as .ai or .pdf, bring it into Motion, and turn off fixed resolution for the underlying media (import the file to the Canvas, select it in the Media tab of the Project Pane, select the Media tab of the Inspector, and uncheck Fixed Resolution). You can now scale it as large as you wish with no loss of resolution.

[newbie question]: IDE's used in industry?

Similar Messages

Maybe you are looking for