Newbie question on function pool

Hi Abap Gurus,
I could not locate function pool after searching in se80.
Could you advise how function pools are found?
Thanks in advance
M.M

Hi,
  Function Pool is nothing but a Function Group. So in se80 select Function group and search for the one you are looking for.
Regards,
Sesh

Similar Messages

  • Newbie Question: Rules: Functions: How to compare String based type?

    I have some XML facts in my rules dictionary defined by the following schema (fragments shown)
    <xs:simpleType name="VarType">
       <xs:restriction base="xs:string">
          <xs:enumeration value="Foo"/>
          <xs:enumeration value="Bar"/>
          <xs:enumeration value="Baz"/>
          <xs:enumeration value="Qux"/>
       </xs:restriction>
    </xs:simpleType>
    <xs:complexType name="ProgType">
       <xs:sequence>
          <xs:element name="ID" type="xs:string"/>
          <xs:element name="var" type="VarType" maxOccurs="unbounded"/>
       </xs:sequence>
    </xs:complexType>
    Which means that a Prog of ProgType has an ID and a "list" of "var" strings restricted to bounds specified by VarType.
    The issue comes when I try to create a Rules Function operating on these types.
    Function-> boolean containsVar(ProgType prog,VarType var) (built using the Functions tab of the Rules editor)
    for (String v : prog.var ){
       if (v == var){
          return true
    return false
    The problem we run into here is typing. If v is declared a String, as here, then v == var is invalid because types don't match. But I can't declare v a VarType due to
    RUL-05583: a primitive type or fact type is expected, but neither can be found.
    This problem may stem from the fact the Java's String is declared final and can't be subclassed, so the JAXB translation to Java may have to wrap it, futzing ==/equals() in the process.
    SO... How do I create this method and compare these values?
    TIA
    Edited by: wylderbeast on Mar 10, 2011 9:15 AM - typos
    Edited by: wylderbeast on Mar 10, 2011 9:18 AM

    And here's the answer.
    var.value() seems to return the String value of the type
    so the comparison becomes
    (v == var.value())
    Live and learn....

  • New Function Pool Program Question?

    I am new to these processes.......If I copy a Function Pool Include to a new one, and create a new Function Group to link it to, thus I assume a new Function Pool SAPLZXXX program will will be automatically created, I am trying to determine how, or where config?, is done to link it (the new Function Pool/SAPLZXXX) to its process? 
                    Any input will help.....Thank-You.

    Hi,
    When you create a Function group under a Function pool, then inside of that Function group main program there will be some includes
    ·        LfgrpTOP. This contains the FUNCTION-POOL statement (equivalent for a function group of the REPORT or PROGRAMstatement) and global data declarations for the entire function group.
    ·        LfgrpUXX. This contains further INCLUDEstatements for the include programs LfgrpU01, LfgrpU02,... These includes contain the actual function modules.
    ·        The include programs LfgrpF01, LfgrpF02,... can contain the coding of subroutines that can be called with internal subroutine calls from all function modules of the group.
    Regards
    Sudheer

  • Newbie question - XML version, searching by artist

    Probably quite a common problems - apologies for newbie questions.
    I've changed the URL of my MP3s in my XML to a new location and refreshed my feed. Is there a way of seeing what version of the XML iTunes is using? (it takes around 24 housr to refresh, right?)
    Also, when I'm searching for my podcast by author it's not coming up (<channel><itunes:author>) - is there a reason for this or a way to get it to show up when people search for the artist, other than doubling it in the title? (This works by the way, but I'd prefer not to!)
    Thanks.

    you can do it in just one loop, going through all the image
    tags in index_content and for each tag fill the values of all four
    arrays
    for (i...) {
    get the appropriate child of index_content
    first_array[ i ] = value of first tag
    second_array[ i ] = value of second tag
    no need for multiple loops.
    flash has functionality for xml files, but it helps to write
    a little wrapper around it, to simplify programming, especially if
    you work with xml a lot.. I wrote my for work, so I can't show it
    to you, but it's not very complicated to do

  • BDC and Function Pool

    Hi,
    Had some questions, would appreciate if somebody could help answer.
    1) If I want to do a BDC on TCode T1 and if BDC is successful on T1 then do a BDC on Tcode T2 (all in the same program), Can we do a BDC using session method on multiple transactions in one session?
    2) Can you call a screen from a function pool?
    Thanks in advance.
    Mick

    Hi Venkat,
    I do not have a real life scenario, but this question came to mind when I was trying something.
    But hypothetically consider a scenario where I create Purchase Orders using BDC and then if the BDC is successful then immediately do another BDC for Goods Receipt. This could also be part of some cleanup exercise where I want to do BDC's on 2 TCodes, the 2nd one only if the 1st one is successful.
    Regards,
    Mick

  • SG200-08 Newbie Questions

    I have recently purchased the SG200-08 Smart Switch, but I have a few "newbie questions" about it as I get started using it.
    The on board firmware shows 1.0.1.0. Is that the latest firmware to the switch?
    Do I need to enable IPv6 Auto Configuration and DCHPv6 in my switch settings to be ready for IPv6 as my ISP rolls it out down the road?
    How do I go about changing the switch's username? I was able to easily change the password, but having issues getting the username to change.
    Do I need to do anything about the LLDP-MED settings? What exactly is that?
    How do I confugure the System Time Settings so the switch functions in my time zone (USA Central Time)?
    Thanks a bunch for any assistance!

    Hi Nathan,
    My guess is that NAT is already on - you have one public IP address from your ISP. Your router will use NAT (network address translation) to allow multiple clients (and either dynamically assign them private IPs via dhcp or you set them statically) to connect to the internet using the one public IP. It also sounds like your RV042G is assigning both ipv6 and ipv4 addresses, and theres nothing wrong with that. Unless you have specific information re: ipv6 from your isp, however, I would suggest not worrying about it until you hear from them. Are your macs connected to the router via the SG200 switch? If so, it looks like its passing ipv6 just fine.  UPnP is something completely different - thats with opening ports like you mentioned - its a way that your devices can communicate with the router to automatically enable the proper port forwarding for the device/application.
    Regarding the username, create a new user account. I don't think you can edit the cisco user, but try deleting it after creating and testing a new user account..
    I'm not familiar with the Polycom system, but I would leave the settings as default unless you are using true IP phones (rather than an ATA adapter). From a quick google of the polycom device, I don't think you will gain anything from LLDP/CDP as the handsets use regular cordless phone freqs. With my setup, we use cisco IP desk phones and cordless wifi phones, CDP makes life easy as the cisco access point, wifi phones, cisco switch, and cisco desk phones (connected via ethernet) see each other and know what they're dealing with automatically.
    I don't see the SNTP setting for unicast / broadcast that you're looking at. For the switch to get the time from a sntp server, under administration -> time -> sntp settings, add a server, and then back on time-> system time, enable sntp server as the main clock source. What are you using as your sntp source? Do you have an internal sntp server? You don't need to enable dhcp on the sntp server.
    May I also point you to the two manuals, I think they may be helpful:  RV042G  & SG200
    Hope thats helpful.
    Best,
    David
    Please rate any helpful posts.

  • Deleting function pool

    hello experts,
    i want to delete function pool from my developement client as it is not assigned to any function  group.
    how to do it..??
    thnax in advance..

    Hi suchitra B. dange,
    questions like this come from people that still use whatever transaction instead of SE80 ABAP workbench.
    Start SE80, select function group, give name. In the tree, right click on object, delete.
    Regards,
    Clemens

  • RV042G Newbie Questions

    I have the new Cisco RV042G router, and I have just a few "newbie questions" about it as I get started using it:
    The firmware on board is v4.2.1.02. Since this is a brand new router, is that the latest firmware?
    Under Time>DST Dates, what do I need to configure in there? I'm in the US, Central Time.
    I want to use Back to My Mac from iCloud (formerly MobileMe). Under the iCloud preferances pane on my Mac, it's saying: "Back to My Mac may be slow because NAT Port Mapping (NAT-PMP) or Universal Plug and Play (UPnP) is turned off on your router. Turn on NAT-PMP or UPnP." What should I enable on my router in order for Back to My Mac to better function?
    I'm using a VOIP phone on the network (only 1 device with a couple phones). Are there any QoS settings I should tweak for better performance of my VOIP phone? I did change the port the VOIP phone is connected to to High (instead of Normal) under Port Settings. Will this help boost performance?
    I also want to setup a VLAN on a port for guests to access the Internet, but not have any access to my personal network. Here's the steps I've done so far. Is this sufficient or is there anything else I need to do?
    I went to Setup>Network, enabled Multiple Subnets.
    I added 192.168.254.1/255.255.255.0 as a subnet.
    I went to Port Management>Port Setup, set the port I wanted to use (Port 4) to VLAN2.
    I went to Firewall>Access Rules, added two rules:
    Deny All Traffic from 192.168.254.0 to 192.168.1.0.
    Deny All Traffic from 192.168.1.0 to 192.168.1.0.
    Thanks everyone for your help!

    Easy.  just goto the DHCP field and fill in the Static DHCP fields.
    Assigning static IP addresses by adding devices from a list
    Click Show unknown MAC addresses. The IP & MAC binding list appears. If the web browser displays a message about the pop-up window, allow the blocked content.
    The devices are listed by the IP address and the MAC address. (Typically the MAC address appears on a label on the bottom panel or back panel of a device.) If needed, you can clickRefresh to update the data.To select a device, first enter a descriptive Name. Then check the Enable box. Alternatively, select all devices in the list by clicking the check box at the top of the Enable column.
    Click OK to add the devices to the Static IP list, or click Close to close the pop-up window without adding the selected devices. After you click OK, a message appears. The message includes important information. Read it before clicking OK. Keep the browser open and wait until the selected MAC addresses appear in the Static IP list.
    Modify or remove list entries, as needed:
    To modify the settings: Click a device in the list. The information appears in the text fields. Make the changes, and then click Update. If you do not need to make changes, you can click Add New to de-select the entry and clear the text fields.
    To delete an entry from the list: Click the entry that you want to delete, and then clickDelete. To select a block of entries, click the first entry, hold down the Shift key, and then click the final entry in the block. To select individual entries, press the Ctrl key while clicking each entry. To de-select an entry, press the Ctrl key while clicking the entry.
    Assigning static IP addresses by entering devices manuallyIn the Static IP Address section, add or edit entries as needed. Remember that the settings are not saved until you click the Save button.
    To add a new device to the list: Enter the following information, and then click Add to list.
    Static IP Address: Enter the static IP address. You can enter 0.0.0.0 if you want the router to assign a static IP address to the device.
    MAC Address: Enter the MAC address of the device. (Typically the MAC address appears on a label on the bottom panel or the back panel of a device.) Enter the address without punctuation.
    Name: Enter a descriptive name for the device.
    Enable: Check this box to assign the static IP address to this device.
    To add another new entry: Enter the information, and then click Add to list.
    To modify the settings: Click a device in the list. The information appears in the text fields. Make the changes, and then click Update. If you do not need to make changes, you can clickAdd New to de-select the entry and clear the text fields.
    To delete an entry from the list: Click the entry that you want to delete, and then click Delete. To select a block of entries, click the first entry, hold down the Shift key, and then click the final entry in the block. To select individual entries, press the Ctrl key while clicking each entry. To de-select an entry, press the Ctrl key while clicking the entry.
    Using the Static IP List to Block Devices
    You can use the Static IP list to control access to your network. You can block access by devices that are not on the list or do not have the correct IP address.
    Add devices to the Static IP list as described in Static IP Addresses.
    Enable or disable the following features:
    Block MAC address on the list with wrong IP address: Check this box to prevent a computer from accessing your network if its IP address has been changed. For example, if you previously assigned a static IP address of 192.168.1.100 and someone configures the device to use 192.168.149, the device will not be allowed to connect to your network. This feature discourages users from changing their device IP addresses without your permission. Uncheck the box to allow access regardless of the current IP address assignment.
    Block MAC address not on the list: Check this box to block access from devices that are not included in the Static IP list. This feature prevents unknown devices from accessing your network. Uncheck the box to allow access by any connected device that is configured with an IP address in the correct range.
    Hope that helps.
    Regards Simon
    http://www.linksysinfo.org

  • Newb question - ufsdump

    Hey guyz,
    Quick newb question:
    What is the function of the n modifier in "ufsdump 4uf /dev/rmt/0n /export/home"?
    Thanks.

    The tape device /dev/rmt/0 can be accessed through a number of "names". The exact name used indicates a exactly how the hardware should access the device.
    /dev/rmt/0n is the no rewind version. If you don't add the n then the tape will be automatically rewound on close.
    You have to use that version if you want to dump multiple things onto the tape one after the other.

  • Total Newbie Question ... Sorry :-(

    I know it's a windows thing, and I am now converted to Mac but I gotta know this because it's doing my head in. It's a complete stupid green gilled newbie question.
    When installing new programs on a Mac can you create shortcuts to the programs on the Dock? I did what I THOUGHT it would be, i.e I made an Alias and stuck it in the dock, but on rebooting my Mac later on, in place of the shortcuts where 3 question marks which when clicked on did absolutely nothing???
    Help?
    A.L.I
    Windows XP Pro Desktop, Macbook Pro, 60GB iPod Video   Mac OS X (10.4.5)   OS X

    You aren't installing something from a dmg file are you? The dmg is a disk image – kind of a virtual CD. So when you double click the dmg and then get the little disk/hardrive/custom icon on your desktop that is the same as if you had mounted a CD. You then need to drag the application off of that "CD" into your application folder. Then it is truly installed.
    You can then "eject" the icon your your desktop. This is what happens when you shutdown and without remounting the image your dock shortcut can't find the original.
    Just a thought.

  • Newbie Question. just installed IE7.. how do I set up a local host to preview sites?

    Sorry for the newbie question... but it's been a long time since I have done this
    Thanks!

    Just define your site in DW as always.  For a static site, that's all you need to do.

  • Newbie Question about FM 8 and Acrobat Pro 9

    Hello:
    I have some dcouments that I've written in FM v8.0p277. I print them to PDF so that I can have a copy to include on a CD and I also print some hard copies.
    My newbie question is whether there is a way to create a  PDF for hard copy where I mainitain the colors in photos and figures but that the text that is hyperlinked doesn't appear as blue. I want to keep the links live within the soft copy. Is there something I can change within Frame or with Acrobat?
    TIA,
    Kimberly

    Kimberly,
    How comes the text is blue in the first place? I guess the cross-reference formats use some character format which makes them blue? There are many options:
    Temporarily change the color definition for the color used in the cross-reference format to black.
    Temporarily change the character format to not use that color.
    Temporarily change the cross-reference definition to not used that character format.
    Whichever method you choose, I would create a separate document with the changed format setting and import those format into your book, create the PDF and then import the same format from the official template.
    - Michael

  • The function pool 'SAPLRSDRC' is not available

    Hello Expert,
    To define the virtual cube with function, 'SAPLRSDRC' is required.
    However, in my system, this function pool is not existed.
    Do anybody know why?
    Thanks
    XY

    liel_noy wrote:
    and how i do it?
    You might find this helpful for general knowledge regarding Macs.
    Mac 101

  • Domain name settings - Newbie question

    Sorry for a newbie question!
    I am already pointing a domain name to web hosting for email account. Now, I need an application server to run ERP software and Oracle, and installing Solaris and Oracle need a domain name.
    If I point my domain name to the server, how do I receive emails from web hosting???
    Install an email server to the application server instead? What can I do if I want the same domain name? Any option?

    Setting up a mailserver and making sure it doesn't suddenly turn into a spambox is not something you do with the use of a few commands. I suggest to dive into the Solaris admin guide on docs.sun.com and read up on e-mail and network services.
    If that is asking too much of your time you'll be better off getting your ISP to handle all this for you.

  • Domain Name settings in Solaris - Newbie question

    Sorry for a newbie question!
    I am already pointing a domain name to web hosting for email account. Now, I need an application server to run ERP software and Oracle, and installing Solaris and Oracle need a domain name.
    If I point my domain name to the server, how do I receive emails from web hosting???
    Install an email server to the application server instead? What can I do if I want the same domain name?

    Your questions are completely off-topic for the forum.
    These SunOS forums are for questions on <i>"how do I install my OS"</i>
    You particular question is in the <i>"how can I install Solaris while using the CD drive"</i> forum.
    So, if you had a question on how to edit the /etc/inet/hosts file to establish a FQDN on the computer, then it might be appropriate for the forum.
    Unfortunately, I don't have a clue on where to redirect you, except perhaps to the Sun Java Enterprise System suite of applications?

Maybe you are looking for