Newbie to Flash Please Help!
Link here:
http://www.moldex.com/mask.htm
I have 19 frames PNG created....I imported PNG into
flash......as 19 frames. I want to just be able to mouseover each
text and then a different mask image appears on mouseover. All my
19 frames look exact but with different mask image. Also how do I
underline text in flash?
Hi whiskey3 from your msg, I assume you would want to change
the image on mouseover of each link. To explain all steps might be
a bit long here. However, basically you can achieve this by using
'Buttons'. Try some of the tutorials in Flash. It will help you a
lot. By the way, what you want to achieve sounds easier to be done
in dreamweaver with javascript.
Similar Messages
-
My app store is not working after installing mavericks. When I open app store it repeatedly asking me to login with apple ID and to provide User name and Password for proxy authentication in a loop.I am a newbie to mac,Please help me.
Hmmmm... would appear that you need to be actually logged in to enable the additional menu features.
Have you tried deletting the plists for MAS?
This page might help you out...
http://www.macobserver.com/tmo/answers/how_to_identify_and_fix_problems_with_the _mac_app_store
Failing that, I will have to throw this back to the forum to see if anyone else can advise further.
Let me know how you get on?
Thanks. -
Text editable in images in flash Please help
Hello
Dear All Friends
I want to make text editable in images in flash to get copy from text
can i Make this
and other question please
can i convert text in image in flash to normal string ?
please help
Thank youImages do not store text data in any isolateable manner, it is comprised of just pixels like anything else in the image. You would need to develop some form of complicated text recognition program to be able to extract text from an image, and I don't believe anyone has.
-
Actiontec GT701C DSL light keeps flashing please help
I use to have the WIFI router from verizon but the wifi range was not strong enough for certain items in my home... in addition the items could not even find the network on wifi. i replaced it with a Actiontec GT701C so i could use my old wireless router that was strong enough to support my whole home .. But know when i connect my DSL line to the New modem the GT701c i can not access the internet .. i Could get to the configure screen but other than that the DSL Light keeps flashing any suggestions.. i have rebooted the modem and tryed diffrent phone line and phone jacks in my home please help !!!
Does your older modem connect still? If so, could you tell us which modem it is so that we could help you obtain the Transceiver Statistics from it? It's possible the ActionTec could either be defective or it could be sensitive to noise on the line if the signal isn't the greatest.
========
The first to bring me 1Gbps Fiber for $30/m wins! -
HTML into Flash please help!
I want to put a HTML webpage into a certain field that is
scrollable and when a link is clicked that box will change to give
the content from the new page in that field ... please help, and
also can javascript hover-off links from a webpage be put into
flash?1. Flash contains a TextField component which has
limited
html support, not enough to support the usual html required of
an active web page.
Supported
html tags for Flash Player 8
2. You can use usual html
anchor
tag in a Flash TextField.
3. You need to turn on html for a Flash TextField. This can
be done in the
IDE
or in
Actionscript.
4. You can also use
CSS
formatting in a Flash TextField.
5. For rollovers of specific parts of a Flash TextField, you
will need to use Actionscript and generate TextFields for each part
of the addressable text such as every word or every phrase goes
into a separate TextField and then the TextFields are aligned to
appear as one larger TextField.
Flash requires a different design mentality than do
HTML/CSS/JavaScript pages. So there are more creative approaches to
present the information you have using Flash that are not easy or
even possible in HTML/CSS/JavaScript. -
BB NEWBIE!! Please help me get pictures into my phone from my Computer!
I have been trying to get pictures of my 3 wonderful kids into my phone off of my computer. I also have them on a USB flash drive that I have all of my pictures on that I have also tried to move them off of. I have the newest version of BB Desktop Manager that I downloaded last night. I than click on the media manager and it opens up a window Media Manager. On the top I have some pictures that I have choosen to downloaded to my phone listed under My Media. On the bottom part of the screen I can not get it to list me phone in there under My Devices. My USB Flash Drive will but not my phone. I have check the connection to my phone on the desk manager and it says that it is connected.
Please help me as I am getting Frustrated....
Thanks In Advanced!!
Aliciahave you tried a different usb port for the bb? it should show up automatically. if that does not work, an easy way too is to email them to your bb then save them to the bb itself or the memory card on the phone if one is available, hope this helps
-
Another person who has a problem with Flash - Please Help!!
I have a Dell Dimension 4700 Intel (R) Pentium (R) - 4 CPU 2.80 GHz 2.79 GHz 504 MB of RAM
For a few years now I would have to restore the computer to an earlier time after an update was done in order to view youtube, etc. It seemed that when my computer did an automatic update it would mess up the flash player.
My husband just recently did another update and now the flash isn't working and the computer won't restore anymore.
I keep getting the following messages: adobe flash player active x set up failed to install 19166
program error: failed to register status installation complete
I have uninstalled and installed the flash several times
everytime i go to install flash it says: Adobe Flash Player 10: This application has been downloaded before. Reload?
Then I get: Your security settings do not allow websites to use ActiveX controls installed on your computer.
I don't want to take this somewhere because I have a feeling that will just wipe the computer clean and I have a feeling it is something stupid that I'm not doing.
Please Help.OK...Check, check...did all that. I am cutting and pasting a segment from the flash troubleshooting page because its exactly what is happening to me. There were no responses to help this person.
"I've tried installing flash player 9 but am not able to do so. It will begin installing but when it gets to 'items remaining: 4' the progress bar continues to move and underneath says searching but nothing happens. I tried leaving it on all night but same thing when I came back in the morning. When I close the installer it then says 'stopping now may result in an incomplete set of software' Also, when I tried uninstalling previous versions, the uninstaller does nothing. It says 'items uninstalled: 0' and 'processing', but same thing, the thing spins but nothing happens. i tried the other steps given to see if that helped but nothing seems to work."
Here is the page...
http://sdc.shockwave.com/cfusion/webforums/forum/messageview.cfm?forumid=44&cati d=184&threadid=1267248&enterthread=y#4577694
I tried some of the suggestions above the last two posts. But it looks like my problem is the same as those.
I even tried to post on there but from what I see it looks like I have to have flash to do it...I get the page with the blue lego brick.
I'm pulling my hair out. I didn't realize how much of the internet ran on flash. -
How to Export pictures from iPhoto to external hard disk? Newbie here! Please help!
Need your help guys. Just bought a new Macbook Pro. Loved using the iPhoto but after managing a lot of my photos, realised that I cannot export an edited photo from iphoto to my external hard disk. I am not sure what iphoto version I am running right now but my Mac is brand new and comes with the pre installed softwares. Whenever I try to export an event, folder or even a picture, I will get this message unable to create/Volumes/FreeAgentDrive/ after going thru the Export process in iphoto. Please help!!!
Your Mac can "read" data from an NTFS drive, but can't "write" files to it.
If you intend to use this drive only on Mac computers, then, use Disk Utility to erase it and format for Mac OS Extended (Journaled).
If you want to be able to write files to the external drive AND still use it with Microsoft Windows computers, then, format it as MS DOS. (Or, on a Microsoft Windows computer, format the drive as Fat32. However, if you use Windows XP, be aware that the largest size you can do this with is 32Gb. Vista and Windows 7 doesn't have this limit.)
Another option, do you have to use an external hard drive? What about a flash drive? -
Delete Flash, please help!
Hi, how to delete complet flash for reinstall again.
Full delete fron windows registry. Because, wen i delete from
add/remove programs, and reinstall, the problem persist.
I want that it takes me like a clean installation, as if
outside the first time that I install.
Please Help!!
Thank you very much!Hi. I had the same problem. You have to download the flash
un-installer from this web site. I forget how I found it, but if
you search for it under "Search" on this web site, you'll probably
find it. I think that is what I did. Once you have downloaded it,
you have to run it and it will uninstall flash. Carefull though.
Once you remove it, you cannot re-install it from this web site.
Check that you have "Flash.exe" on your computer. I found mine in:
C:\WINDOWS2\SYSTEM\MACROMED\FLASH.
The icon is a circle colored grey with a small " f " in it.
This will download Flash again for you. I don't know why it is not
shown in the Macromedia web site. I couldn't find it here myself.
Hope this helps. I'm running Windows98. -
MB Dead now after flashing, please help!@
Writing this on my old p1.
I just flashed my Neo 2 865PE to 1.4 and now it wont boot!
On my bracket on the back the top right one is red rest are green..
What now? Am I screwed? Nothing but problems with this MSI board I tell you....
Please help!Get 1.3 from the website if that's what your board came with originally. If it's not, get the one that came with your board. The reason I say that is that is, at least for me, the flashing program says there is a Bootblock Mismatch with all other bios' except what came with my motherboard. ?(
Make that backup disk and remane that bios file for your board to AMIBOOT.ROM. and have it in.
Unplug your power. Take out your RAM. Clear the Cmos via the jumper, I believe it's JBAT1. Put your RAM back in. Then power up. Maybe have someone turn on the power while you hold down the Ctrl + Home Key. You really have to be fast. When you get your floppy, the board will read from it and restore your bios - then beep 4 times. It will then reboot. If you're lucky, all will be ok and you can go in and reset your settings in the Cmos.
I want to make this suggestion to anyone who flashes their bios': Have that backup disk in while you flash. If the flash goes bad, when you hit the reset button, immediately the boot block will hunt for that AMIBOOT.ROM file. If you shut down your power with the power button, your system won't power back up. You will swear it's dead. You won't get it back until you unplug your power cord, clear your cmos, reset your RAM, power back on and IMMEDIATELY hold down the Ctrl + Home Key. I really don't know what is going wrong with these bios releases, but for some boards, they appear to kill the board. I'm convinced that I will never be able to use any other bios but 1.3. There is a glitch in the chip evidently. With the bios that came programmed on the chip, you can, seemingly, get your board back. At least, that's been true for me.
Just keep trying. I believe you can get your board back. The boards are really nice but really finicky.
Mark -
Bad BIOS Flashing - Please Help !
Hello,
I'm having a serious trouble because the BIOS UPDATE failed since I had a power outage while I was updating the BIOS.
Since that, I couldn't get any video output, it's only 8 beeps with the orange light, and then the blue light and nothing happens. Is there a way to prepare an USB KEY with the BIOS updates, initiating the CPU with the Windows+B keys pressed on?
I've tried to apply the BIOS UPDATE SP63535 who had the BIOS version ANP_704.bin
Please HELP ME, thanks a LOT !!!
KlausHello @klausbert,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how your desktop computer is not able to get any video output, and I would be happy to assist you in this matter!
To further diagnose this issue, I recommend following the steps in this document on Recovering the BIOS. This should help restore the BIOS back to factory defaults.
If the issue persists, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping! -
New at Flash, please help! Sound On/Off Button
I'm trying to create a button that when clicked once, it plays music, and when clicked again, it stops. I don't need the button image to change at all, I just need a simple start/stop.
I've been able to make the button start the music when clicked but I've not been successful in making it stop.
I am using CS4, and have no scripting experience.
This is for a graphic arts assignment so please help!drag your button to the stage and assign it an instance name (eg, btn). you can then use:
var sound:MP3=new MP3();
var sc:SoundChannel = sound.play();
btn.addEventListener(MouseEvent.CLICK,f);
function f(e:MouseEvent):void{
if(sc){
sc.stop();
sc=null;
} else {
sc=sound.play(); -
Hello again my fellow smarter than me mac lovers. OK, here is my problem. I used my ibook all night last night at work. Used it this morning just fine. My teenage daughter was using it and she stated that it froze on a screen she was looking at on possible you-tube. She proceeded to turn it off (not restart), and when she turned it back on it only responded with a grey screen. After a few minutes of the grey screen, a small blue folder will flash in the middle with the "finder" face/icon on it and a question mark flashing. It stays there a few minutes, but no cursor to click on the folder ect. After several minutes of that, the screen will go black and the computer will turn off. I have tried to reset the PRAM and PMU, but no go. Do not have discs, as this was a buy this past summer refurbished. I love my ibook and really hope it can be fixed. If there are any suggestions, please let me know. If not, I guess we will take a trip to the apple doctor. Thanks again for any help you might have.
ValHello Gengap,
This sounds like a failing harddrive issue....a computer starting up with a flashing question mark means that it is unable to find the software to load up the OS. Since you don't have the discs that should have come with the computer, you can try inserting a Tiger disc, or some other equivalent OS.
Start up from a disc, when the installer opens, open up Disk Utility. In Disk Utility, you should see a harddrive appear on the top left - but if it is failing (this just happened to me on an iBook G4), then it might not be there at all.
So if you close out Disk Utility, and you try to proceed with the installation, if the disc is not being recognized, then it will not be available to select a destination disc to try a re-install.
You might be SOL in recovering any data that is on the drive. A replacement HD should be in order if you are unable to re-install the OS.
Once the replacement HD is in, when you go to set it up again, you'll want to install a fresh clean copy of the OS by erasing the HD (incase it's formatted to work for Winblows) - you'll want to re-format it to work for Mac OS (Extended), and then re-install.
I'm not sure how comfortable you are with taking computers apart or not but since you bought it second hand anyways, you won't be voiding any warranty's of any kind. I just did this very same procedure on a 12" iBook G4 800MHz.
Ifixit.com is a great place to find exactly what you are looking for with step-by-step troubleshooting guides to get your mac up and running again.
Please post back to let me know how it works.
<Edited by Moderator>
Jason -
I am trying to create a simple slideshow. Each time a new
photo comes up, I need the viewer to be able to click and go to a
separate html page for each photo. I know this is very simple, but
I keep getting code errors. The first photo works, but after that,
I get duplication errors. Any help would be greatly appreciated.
This is what the original code looks like. I thought all I
needed to do was copy and paste it with each keyframe and then just
change the html redirect page.
inv_btn.addEventListener(MouseEvent.CLICK,
buttonClickHandler);
function buttonClickHandler(event:MouseEvent):void {
navigateToURL(new URLRequest("
http://www.golfozarks.com/little_league/bk-auto/john-botson.htm"));
trace("");
The Flash is playing right now at
http://www.golfozarks.com/little_league/bk-auto/roster.htmWithout seeing what the errors are saying I am only guessing
that the duplication may be regarding the addEventListener
attachments. You may be able to get away with using:
inv_btn.removeEventListener(MouseEvent.CLICK,
buttonClickHandler);
ahead of each secondary (after the first frame) assignment of
adding the listener.
Another more efficient approach would be to have the
buttonClickHandler and event listener remain constant, but pull the
urlRequest out as a separate variable and only change its value for
each player's frame.
So you'd have a layer that spans all other layers that
contains the url variable declaration, event listener assignment,
and the buttonClickHandler function, and only in the first frame.
var url:URLRequest = new URLRequest();
inv_btn.addEventListener(MouseEvent.CLICK,
buttonClickHandler);
function buttonClickHandler(event:MouseEvent):void {
navigateToURL(url);
Where only the url value changes with each player frame:
url = "
http://www.golfozarks.com/little_league/bk-auto/...etc" -
Creating eLearning Content Using Flash - Please Help
I am tasked with creating eLearning training using Flash. I know how to create flash movies, tweens, etc. I am also pretty well versed with Dreamweaver, HTML, etc.
But how do you create the fixed header and a footer with navigation and the navigation between 30 to 40 "pages" or "movies"? I am assuming there is some automated method to create navigation...
We want a fixed header, fixed navigation in a footer, movie content in the center, and the ability to automatically move from "page" to page and also allow the student to click Next and Previous buttons to move from page to page.
I would greatly appreciate a link to a tutorial or any advice on getting started.
Thanks,
Jack LoganbillMiss_Angela wrote:
> I am trying to create a flash intro like this one....
>
>
http://www.mark-knopfler-news.co.uk/
>
> I am really new to flash and don't know much beyond
making menus. I have
> looked at different tutorials, but I don't see anything
about how to create an
> intro like this one.
Check in help under the Tutorial section for "Add motion
tweens"
Basically you need to import your images, convert them to
instances like
movie clips or graphics symbols then motion tween them to get
them move
and use color effect Alpha to get them to fade in.
Check the help first and tell me how far can you get from
there, whatever
problem you face, post back, will help you go ahead with it.
Best Regards
Urami
Beauty is in the eye of the beer holder...
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>
Maybe you are looking for
-
Error in using the Socket Adapter while deploying the composite
I am going through a Socket Adapter sample given in Oracle JCA Adapters for Sockets"Oracle Socket Adapter Hello World". This sample demonstrates inbound request/response and synchronous outbound request/response modes of communication using using Ora
-
"Print Settings" are not stored in the print preset
Hi everybody, It seems that, no matter how many times i save and update the profile, all the print setting (image size, sharpening, bit depth, color management, ...) are store within the preset, all but the Epson Driver settings, which have to be sel
-
Need information on an i series laptop
I recently acquired an IBM Thinkpad laptop with no documentation or power adapter. I am trying to find out where I can download a user's manual and buy an adapter. However, the part numbers on various internet sites do not relate to this unit. It say
-
Elantech-Y410P-Synaptics+elantech-tp-dkms-Random ClickFinger
I recently got a Lenovo IdeaPad Y410P and have it set up to dual-boot with Windows 8. (On Windows, the Elantech driver, while horrible to configure, works.) I'm using xf86-input-synaptics and elantech-tp-dkms. I'm configured with the default 50-synap
-
From my MAC, I can see the networked PC,s and all info on them. However, when I try to see the MAC from a PC, It asks for a username and password. I have entered every username on the MAC, and combinations of passwords, and it always comes back "inco