Newbie trying to configure xfi with virtual

hi,i'm trying to configure my soundcard with virtual dj so that i can monitor through the headphones one track whilst another is playing thru the speakers. I'm not sure how to do this - have selected Asio in 'soundcard' on virtual dj - am then able to select between running master thru channels and 2, with phones thru 3 and 4 or vice versa.How do i effect this in the console launcher please?Am in audio creation mode but having no luck!?thnaksBArry

anyone? technical support is ringing out.thanks

Similar Messages

HT1937 i have just downloaded a new version of Iphone software on my iphone 3 . but i'm facing problem in configuring it . also tried to configure it with itunes but it always says that there's no sim card in your phone and previously i was using same sim

i have just downloaded a new version of Iphone software on my iphone 3 . but i'm facing problem in configuring it . also tried to configure it with itunes but it always says that there's no sim card in your phone and previously i was using same sim without any problem . need solution . kindly help .

Hello ashharuddin,
Thank you for using Apple Support Communities.
For more information, take a look at:
iPhone: Troubleshooting No SIM
http://support.apple.com/kb/ts4148
Toggle Airplane mode On and Off.
Try turning iPhone off and then on again.
Check for a carrier settings update. Tap Settings > General > About. If an update is available, a prompt will appear.
Remove the SIM Card and verify that it is a valid, carrier-manufactured SIM. Also verify that it is not damaged, worn, or modified. Then reinsert it.
Restore the iPhone.
Have a nice day,
Mario

I have internet optic fiber connection and I'm trying to configure it with my Airport Express but doesn't works, appears that I have IP and DNS, as I'm a computers dummy , who could help me to configuration it, please?

I have internet optic fiber connection and I'm trying to configure it with my Airport Express but doesn't works, appears that I have IP and DNS, as I'm a computers dummy , who could help me to configuration it, please?

You're welcome.
Voicemail is left at your carrier's server. That will continue to work unless you report your iPhone as lost or stolen with your carrier.
You may never find it again and you can't if the iPhone remains offline or out of service which means the iPhone is powered off or doesn't have cellular reception.

Help configuring Audition with Virtual Audio Cable and Skype

I'm using the latest version of Audition, along with Virtual Audio Cable and Skype for my PC (Windows 7). While I'm able to properly configure my own microphone (Edirol UA-25), to be captured by Audition on track 1, I can't seem to get track 2 configured properly to capture and record.
I seem to be missing a step.
Is there anyone that can help me properly configure or offer an alternative that will allow me to record my microphone and the Skype call on two separate tracks?
Thanks in advance for your expertise!

Others may have made it work but I've never persuaded Audition to record a mic in one channel and line out (Skype) in the other. Since Audition it designed to work with a single ASIO audio interface, this makes sense.
My solution is to use a little utility called the iFree Skype recorder: Record Skype Calls with iFree Skype Recorder - Your FREE Skype call recorder software
It works well for me, keeping the outgoing part of the call and the incoming separate for easy editing later. It works fine with an external audio interface and good mic as long as Skype is set up to work that way.
The only drawback is that it records in MP3 not wave but, given the quality of most Skype calls, this isn't really a deal breaker.

Configuring webclient with Virtual Host

i configure portal with a virtual host.
Portal it is ok. i can navigate and login with the virtual host server. But the collaboration portlets (Message portlet, calendar portlet) link to the original server.
what can i do to work also with virtual host?
my original server is the internal host name.
the virtual host is the public server name.
thanks in advance
Regards
giorgio

no problem from flex side.. need to escape crossdomain.xml
file in htacess for codeigniter i.e RewriteCond $1
!^(index\.php|images|application|uploads|robots\.txt|crossdomain\.xml)
in htaccess file.

OIM is not able to Restart the Domain when I am trying to configure it with the Config.sh

Hi,
I am a newbee here. Below is the complete details about my problem:
I have installed WLS1211 (64-Bit) on OEL 6.3 OS & also installed the OIM 11.1.1.7 (64-Bit) on the same machine.
When I am trying to configure the OIM (using config.sh file), system fails to restart the domain & in turn fails the configuration. I navigated to the domain created for OIM and verified that log file displays following error:
####<Sep 6, 2013 7:41:16 PM IST> <Info> <Server> <blr2211427> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1378476676195> <BEA-002609> <Channel Service initialized.>
####<Sep 6, 2013 7:41:16 PM IST> <Info> <Socket> <blr2211427> <AdminServer> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1378476676216> <BEA-000415> <System has file descriptor limits of soft: 65,536, hard: 65,536>
####<Sep 6, 2013 7:41:16 PM IST> <Info> <Socket> <blr2211427> <AdminServer> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1378476676218> <BEA-000416> <Using effective file descriptor limit of: 65,536 open sockets and files.>
####<Sep 6, 2013 7:41:16 PM IST> <Info> <Socket> <blr2211427> <AdminServer> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1378476676218> <BEA-000406> <PosixSocketMuxer was built on Apr 24 2007 16:05:00>
####<Sep 6, 2013 7:41:16 PM IST> <Info> <Socket> <blr2211427> <AdminServer> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1378476676238> <BEA-000436> <Allocating 3 reader threads.>
####<Sep 6, 2013 7:41:16 PM IST> <Info> <Socket> <blr2211427> <AdminServer> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1378476676238> <BEA-000446> <Native I/O enabled.>
####<Sep 6, 2013 7:41:16 PM IST> <Info> <IIOP> <blr2211427> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1378476676483> <BEA-002014> <IIOP subsystem enabled.>
####<Sep 6, 2013 7:41:20 PM IST> <Error> <Security> <blr2211427> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1378476680681> <BEA-090892> <The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: JPS-06514: Opening of file based keystore failed.>
####<Sep 6, 2013 7:41:20 PM IST> <Critical> <WebLogicServer> <blr2211427> <AdminServer> <main> <<WLS Kernel>> <> <> <1378476680682> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: JPS-06514: Opening of file based keystore failed.
weblogic.security.SecurityInitializationException: The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: JPS-06514: Opening of file based keystore failed.
    at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1402)
    at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1022)
    at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
    at weblogic.security.SecurityService.start(SecurityService.java:148)
    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Caused By: oracle.security.jps.JpsRuntimeException: JPS-06514: Opening of file based keystore failed.
    at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:170)
    at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:383)
    at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
    at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:57)
    at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:45)
    at java.lang.reflect.Constructor.newInstance(Constructor.java:526)
    at java.lang.Class.newInstance(Class.java:374)
    at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1343)
    at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1022)
    at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
    at weblogic.security.SecurityService.start(SecurityService.java:148)
    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Caused By: oracle.security.jps.JpsException: JPS-06514: Opening of file based keystore failed.
    at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPDPService(PolicyUtil.java:2984)
    at oracle.security.jps.internal.policystore.PolicyUtil.getPDPService(PolicyUtil.java:3226)
    at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:167)
    at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:383)
    at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
    at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:57)
    at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:45)
    at java.lang.reflect.Constructor.newInstance(Constructor.java:526)
    at java.lang.Class.newInstance(Class.java:374)
    at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1343)
    at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1022)
    at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
    at weblogic.security.SecurityService.start(SecurityService.java:148)
    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Caused By: oracle.security.jps.service.keystore.KeyStoreServiceException: JPS-06514: Opening of file based keystore failed.
    at oracle.security.jps.internal.keystore.file.FileKeyStoreManager.openKeyStore(FileKeyStoreManager.java:406)
    at oracle.security.jps.internal.keystore.file.FileKeyStoreManager.openKeyStore(FileKeyStoreManager.java:352)
    at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.doInit(FileKeyStoreServiceImpl.java:122)
    at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.<init>(FileKeyStoreServiceImpl.java:88)
    at oracle.security.jps.internal.keystore.KeyStoreProvider.getInstance(KeyStoreProvider.java:164)
    at oracle.security.jps.internal.keystore.KeyStoreProvider.getInstance(KeyStoreProvider.java:91)
    at oracle.security.jps.internal.keystore.KeyStoreProvider.getInstance(KeyStoreProvider.java:68)
    at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.findServiceInstance(ContextFactoryImpl.java:139)
    at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.getContext(ContextFactoryImpl.java:170)
    at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.getContext(ContextFactoryImpl.java:191)
    at oracle.security.jps.internal.core.runtime.JpsContextFactoryImpl.getContext(JpsContextFactoryImpl.java:132)
    at oracle.security.jps.internal.core.runtime.JpsContextFactoryImpl.getContext(JpsContextFactoryImpl.java:127)
    at oracle.security.jps.internal.policystore.PolicyUtil$3.run(PolicyUtil.java:2956)
    at oracle.security.jps.internal.policystore.PolicyUtil$3.run(PolicyUtil.java:2950)
    at java.security.AccessController.doPrivileged(Native Method)
    at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPDPService(PolicyUtil.java:2950)
    at oracle.security.jps.internal.policystore.PolicyUtil.getPDPService(PolicyUtil.java:3226)
    at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:167)
    at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:383)
    at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
    at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:57)
    at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:45)
    at java.lang.reflect.Constructor.newInstance(Constructor.java:526)
    at java.lang.Class.newInstance(Class.java:374)
    at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1343)
    at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1022)
    at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
    at weblogic.security.SecurityService.start(SecurityService.java:148)
    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
>
####<Sep 6, 2013 7:41:20 PM IST> <Notice> <WebLogicServer> <blr2211427> <AdminServer> <main> <<WLS Kernel>> <> <> <1378476680728> <BEA-000365> <Server state changed to FAILED.>
####<Sep 6, 2013 7:41:20 PM IST> <Error> <WebLogicServer> <blr2211427> <AdminServer> <main> <<WLS Kernel>> <> <> <1378476680728> <BEA-000383> <A critical service failed. The server will shut itself down.>
####<Sep 6, 2013 7:41:20 PM IST> <Notice> <WebLogicServer> <blr2211427> <AdminServer> <main> <<WLS Kernel>> <> <> <1378476680735> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN.>
####<Sep 6, 2013 7:41:20 PM IST> <Info> <WebLogicServer> <blr2211427> <AdminServer> <main> <<WLS Kernel>> <> <> <1378476680754> <BEA-000236> <Stopping execute threads.>
When I tried to google it to find some information I found that I need to provide full access (0777) to the cwallet.sso file available under the MW_HOME\user_projects\domains\domain_name\config\fmwconfig\bootstrap\ location. I did this but was not able to succeed.
I followed following link: http://www.techpaste.com/2012/04/jpsruntimeexception-jps-06514-opening-file-based-keystore-failed/
Also tried other solutions mentioned there but non worked.
Please help.

have you tried taking the backup of keystore.xml and cwallet.sso file, delete them and then restart admin server?

Error while trying to configure DirectAccess with OTP

hi you all
I have a working environment of DirectAccess 2012 R2 for Win8.1 clients (One DA Server)
I have both Vasco and Azure MFA for OTP authentication and I wanted to add any of them to my DA topology
I installed a new dedicated Enterprise-CA and added the OTP templates , added a new DAProbe user to my radius server and followed the rest of the documentation as described on TechNet.
I know there's a bug in the DA UI wizard for OTP so I just enabled Two-Factor authentication and then from PowerShell I ran the command
Enable-DAOtpAuthentication -CertificateTemplateName 'DirectAccessOTPLogon' -SigningCertificateTemplateName 'DirectAccessOTPRegistrationAuthority' -CAServer 'testdomain.com\CA' -RadiusServer MFA.testdomain.com -SharedSecret Aa123456
and I get the following error:
Enable-DAOtpAuthentication : The specified CA servers are either not valid enterprise CAs or specified incorrectly.
Rerun the cmdlet with a valid CAServer parameter in the correct format (FQDN\CAServerName).
At line:1 char:1
+ Enable-DAOtpAuthentication -CertificateTemplateName 'DirectAccessOTPLogon' -Sign ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (CAServer:root/Microsoft/...pAuthentication) [Enable-DAOtpAuthentication],
CimException
+ FullyQualifiedErrorId : HRESULT 80092004,Enable-DAOtpAuthentication
My radius server is domain joined
the PowerShell runs as Administrator
firewalls are disabled on my DC, CA and my radius server and I can ping the CA without any issues
The CA is Enterprise CA for sure and not Standalone
I can issue certificates from the CA without any issues
I tried to input the CA Server like this @{'domain.fqdn'}, 'domain.fqdn', domain.fqdn - all result the same
I even tried to create another CA from scratch just to be sure the problem is not on my server...
in anyway, I'm stuck. seems like no one else on the web ran into this error...
I'd love to get some help on ways to troubleshoot the problem
thanks
Tamir Levy

Hi,
Microsoft recently published a fix for OTP activation problem with Windows Server 2012 R2 Remote Access Management Console :
https://support.microsoft.com/en-us/kb/3047733/. Your error code remind me a Windows Server 2012 problem. Is subject name encoded in your IPHTTPS certificate is encoded in
UTF-8 Format (https://support.microsoft.com/en-us/kb/2796394/)?
BenoitS - Simple by Design http://danstoncloud.com/blogs/simplebydesign/default.aspx

Trying to configure mail with icould

I need assists with trying to set up my mail account on my desk top with the new Icould. I use to have moble me and have transfered everything but my mail on my desktop will not link up. Ipad and Iphone both work but not getting anything through my computer.

Hi,
what exactly do you need?

Newbie trying to configure mail sevice on osx server 10.3.9

Hello,
I have read all posts which appear to deal with the issues I'm having and have tried several of the suggestions, but I am still unable to receive mail on my Mac OSX 10.3.9 server. Here is my postconf -n:
postconf -n
always_bcc =
command_directory = /usr/sbin
config_directory = /etc/postfix
daemon_directory = /usr/libexec/postfix
debugpeerlevel = 2
enableserveroptions = yes
inet_interfaces = all
luser_relay =
mail_owner = postfix
mailbox_transport = cyrus
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
mapsrbldomains = dun.dnsrbl.net
messagesizelimit = 5242880
mydestination = $myhostname,localhost.$mydomain,mail.patrickwgill.com,patrickwgill.com,smtp.pat rickwgill.com
mydomain_fallback = localhost
myhostname = www.patrickwgill.com
mynetworks = 127.0.0.1/32,192.168.0.103/32,$myhostname,localhost.$mydomain,localhost
mynetworks_style = host
newaliases_path = /usr/bin/newaliases
queue_directory = /private/var/spool/postfix
readme_directory = /usr/share/doc/postfix
relayhost =
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = postdrop
smtpdclientrestrictions = rejectmapsrbl
smtpdenforcetls = no
smtpdpw_server_securityoptions = login
smtpdrecipientrestrictions = permitsasl_authenticated,permit_mynetworks,reject_unauthdestination,permit
smtpdsasl_authenable = yes
smtpdtlsloglevel = 0
smtpduse_pwserver = yes
smtpdusetls = no
unknownlocal_recipient_rejectcode = 450
I am also unable to send mail. Here is my telnet reply per one of the posts I read:
telnet mail.patrickwgill.com smtp
Trying 24.59.104.187...
Connected to mail.patrickwgill.com.
Escape character is '^]'.
220 www.patrickwgill.com ESMTP Postfix
I need help with this because I'm afraid that mail bouncing back is causing major problems for me with clients and vendors. Thank you for any assistance...
17'' Powerbook Mac OS X (10.3.9)

Hello again,
I have tried sending messages from my webmail account in another domain and get the following reply:
This is the Postfix program at host www.patrickwgill.com.
I'm sorry to have to inform you that the message returned
below could not be delivered to one or more destinations.
For further assistance, please send mail to <postmaster>
If you do so, please include this problem report. You can
delete your own text from the message returned below.
The Postfix program
<[email protected]>: Command time limit exceeded:
"/usr/bin/cyrus/bin/deliver"
Reporting-MTA: dns; www.patrickwgill.com
Arrival-Date: Sun, 8 Jan 2006 14:05:25 -0500 (EST)
Final-Recipient: rfc822; [email protected]
Action: failed
Status: 5.0.0
Diagnostic-Code: X-Postfix; Command time limit exceeded:
"/usr/bin/cyrus/bin/deliver"
So, it appears to be just hanging for some reason and timing out. Any ideas? I really appreciate your help.

Newbie trying to optimize webcam with ffplay

I am playing with ffplay to view my webcam:
ffplay -f video4linux2 /dev/video0 -x 320 -y 240
According to v4l-info, this is my webcam's native resolution.
I noticed, however, that the display is very delayed, i.e. if I move my head it takes more than a second for my head to follow on the screen.
Which options are relevant in ffplay to experiment with, to make my webcam more responsive? Any pointers? I am completely new to the whole world of video, things like bitrate, pixel type, etc. throw up more questions than could be answered with google, so I want to slowly get the ball rolling by doing something more hands-on.
Any help greatly appreciated!
PS: I know there has to be a way to make this work as on windows the webcam is very smooth...

anyone? technical support is ringing out.thanks

How to configure sso with SSL step by step

Purpose
In this document, you can learn how to configure SSO with SSL. After user have certificate installed in browser, he can login without input username and password.
Overview
In this document we will demonstrate:
1.     How to configure OHS support SSL
2.     How to Register SSO with SSL
3.     Configure SSO for certificates
Prerequisites
Before start this document, you should have:
1.     Oracle AS 10g infrastructure installed (10.1.2)
2.     OCA installed
Note:
1.     “When you install Oracle infrastructure, please make sure you have select OCA.
2.     How Certificate-Enabled Authentication Works:
a.     The user tries to access a partner application.
b.     The partner application redirects the user to the single sign-on server for authentication. As part of this redirection, the browser sends the user's certificate to the login URL of the server (2a). If it is able to verify the certificate, the server returns the user to the requested application.
c.     The application delivers content. Users whose browsers are configured to prompt for a certificate-store password may only have to present this password once, depending upon how their browser is configured. If they log out and then attempt to access a partner application, the browser passes their certificate to the single sign-on server automatically. This means that they never really log out. To effectively log out, they must close the browser.
Enable SSL on the Single Sign-On Middle Tier
The following steps involve configuring the Oracle HTTP Server. Perform them on the single sign-on middle tier. In doing so, keep the following in mind:
l     You must configure SSL on the computer where the single sign-on middle tier is running.
l     You are configuring one-way SSL.
l     You may enable SSL for simple network encryption; PKI authentication is not required. Note though that you must use a valid wallet and server certificate. The default wallet location is ORACLE_HOME/Apache/Apache/conf/ssl.wlt/default.
1.     Back up the opmn.xml file, found at ORACLE_HOME/opmn/conf
2.     In opmn.xml, change the value for the start-mode parameter to ssl-enabled. This parameter appears in boldface in the xml tag immediately following.
<ias-component id="HTTP_Server">
<process-type id="HTTP_Server" module-id="OHS">
<module-data>
<category id="start-parameters">
<data id="start-mode" value="ssl-enabled"/>
</category>
</module-data>
<process-set id="HTTP_Server" numprocs="1"/>
</process-type>
</ias-component>
3.     Update the distributed cluster management database with the change: ORACLE_HOME/dcm/bin/dcmctl updateconfig -ct opmn
4.     Reload the modified opmn configuration file:
ORACLE_HOME/opmn/bin/opmnctl reload
5.     Keep a non-SSL port active. The External Applications portlet communicates with the single sign-on server over a non-SSL port. The HTTP port is enabled by default. If you have not disabled the port, this step requires no action.
6.     Apply the rule mod_rewrite to SSL configuration. This step involves modifying the ssl.conf file on the middle-tier computer. The file is at ORACLE_HOME/Apache/Apache/conf. Back up the file before editing it.
Because the Oracle HTTP Server has to be available over both HTTP and HTTPS, the SSL host must be configured as a virtual host. Add the lines that follow to the SSL Virtual Hosts section of ssl.conf if they are not already there. These lines ensure that the single sign-on login module in OC4J_SECURITY is invoked when a user logs in to the SSL host.
<VirtualHost ssl_host:port>
RewriteEngine on
RewriteOptions inherit
</VirtualHost>
Save and close the file.
7.     Update the distributed cluster management database with the changes:
ORACLE_HOME/dcm/bin/dcmctl updateconfig -ct ohs
8.     Restart the Oracle HTTP Server:
ORACLE_HOME/opmn/bin/opmnctl stopproc process-type=HTTP_Server
ORACLE_HOME/opmn/bin/opmnctl startproc process-type=HTTP_Server
9.     Verify that you have enabled the single sign-on middle tier for SSL by trying to access the OracleAS welcome page, using the format https://host:ssl_port.
Reconfigure the Identity Management Infrastructure Database
Change all references of http in single sign-on URLs to https within the identity management infrastructure database. When you change single sign-on URLs in the database, you must also change these URLs in the targets.xml file on the single sign-on middle tier. targets.xml is the configuration file for the various "targets" that Oracle Enterprise Manager monitors. One of these targets is OracleAS Single Sign-On.
1.     Change Single Sign-On URLs
Run the ssocfg script, taking care to enter the command on the computer where the single sign-on middle tier is located. Use the following syntax:
UNIX:
$ORACLE_HOME/sso/bin/ssocfg.sh protocol host ssl_port
Windows:
%ORACLE_HOME%\sso\bin\ssocfg.bat protocol host ssl_port
In this case, protocol is https. (To change back to HTTP, use http.) The parameter host is the host name, or server name, of the Oracle HTTP listener for the single sign-on server.
Here is an example:
ssocfg.sh https login.acme.com 4443
2. Restart OC4J_SECURITY instance and verify the configuration
To determine the correct port number, examine the ssl.conf file. Port 4443 is the port number that the OracleAS installer assigns during installation.
If you run ssocfg successfully, the script returns a status 0. To confirm that you were successful, restart the OC4J_SECURITY instance:
ORACLE_HOME/opmn/bin/opmnctl restartproc process-type=OC4J_SECURITY
Then try logging in to the single sign-on server at its SSL address:
https://host:ssl_port/pls/orasso/
     3. Back up the file targets.xml:
cp ORACLE_HOME/sysman/emd/targets.xml ORACLE_HOME/sysman/emd/targets.xml.backup
4. Open the file and find the target type oracle_sso_server. Within this target type, locate and edit the three attributes that you passed to ssocfg:
·     HTTPMachine—the server host name
·     HTTPPort—the server port number
·     HTTPProtocol—the server protocol
If, for example, you run ssocfg like this:
ORACLE_HOME/sso/bin/ssocfg.sh http sso.mydomain.com:4443
Update the three attributes this way:
<Property NAME="HTTPMachine" VALUE="sso.mydomain.com"/>
<Property NAME="HTTPPort" VALUE="4443"/>
<Property NAME="HTTPProtocol" VALUE="HTTPS"/>
5.Save and close the file.
6.     Reload the OracleAS console:
     ORACLE_HOME/bin/emctl reload
7. Issue these two commands:
ORACLE_HOME/opmn/bin/opmnctl restartproc process-type=HTTP_Server
ORACLE_HOME/opmn/bin/opmnctl restartproc process-type=OC4J_SECURITY
Registering mod_osso
1.     This command sequence that follows shows a mod_osso instance being reregistered with the single sign-on server.
$ORACLE_HOME/sso/bin/ssoreg.sh
     -oracle_home_path $ORACLE_HOME
     -config_mod_osso TRUE
     -mod_osso_url https://myhost.mydomain.com:4443
2.     Restarting the Oracle HTTP Server
After running ssoreg, restart the Oracle HTTP Server:
ORACLE_HOME/opmn/bin/opmnctl restartproc process-type=HTTP_Server
Configuring the Single Sign-On System for Certificates
1.     Configure policy.properties with the Default Authentication Plugin
Update the DefaultAuthLevel section of the policy.properties file with the correct authentication level for certificate sign-on. This file is at ORACLE_HOME/sso/conf. Set the default authentication level to this value:
DefaultAuthLevel = MediumHighSecurity
Then, in the Authentication plugins section, pair this authentication level with the default authentication plugin:
MediumHighSecurity_AuthPlugin = oracle.security.sso.server.auth.SSOX509CertAuth
2.     Restart the Single Sign-On Middle Tier
After configuring the server, restart the middle tier:
ORACLE_HOME/opmn/bin/opmnctl restartproc process-type=HTTP_Server
ORACLE_HOME/opmn/bin/opmnctl restartproc process-type=OC4J_SECURITY
Bringing the SSO Users to OCA User Certificate Request URL
The OCA server reduces the administrative and maintenance cost of provisioning a user certificate. The OCA server achieves this by authenticating users by using OracleAS SSO server authentication. All users who have an Oracle AS SSO server account can directly get a certificate by using the OCA user interface. This reduces the time normoally requidred to provision a certificate by a certificate authority.
The URL for the SSO certificate Request is:
https://<Oracle_HTTP_host>:<oca_ssl_port>/oca/sso_oca_link
You can configure OCA to provide the user certificate request interface URL to SSO server for display whenever SSO is not using a sertificate to authenticate a user. After the OracleAS SSO server authenticates a user, it then display the OCA screen enabling that user to request a certificate.
To link the OCA server to OracleAS SSO server, use the following command:
ocactl linksso
opmnctl stoproc type=oc4j instancename=oca
opmnctl startproc type=oc4j instancename=oca
You also can use ocactl unlinksso to unlink the OCA to SSO.

I have read the SSO admin guide, and performed the steps for enabling SSL on the SSO, and followed the steps to configure mod_osso with virtual host on port 4443 as mentioned in the admin guide.
The case now is that when I call my form (which is developed by forms developer suite 10g and deployed on the forms server which is SSO enabled) , it calls the SSO module on port 7777 using http (the default behaviour).
on a URL that looks like this :
http://myhostname:7777/pls/orasso/orasso.wwsso_app_admin.ls_login?Site2pstoreToken=.......
and gives the error :
( Forbidden
You don't have permisission to access /sso/auth on this server at port 7777)
when I manually change the URL to :
https://myhostname:4443/pls/orasso/orasso.wwsso_app_admin.ls_login?Site2pstoreToken=.......
the SSO works correctly.
The question is :
How can I change this default behaviour and make it call SSO on port 4443 using https instead ?
Any ideas ?
Thanks in advance

Warning: Problems occurred during synchronization in Charm with virtual sys

Hi Team
I have configured charm with virtual system --(Dev>V01>V02>) as client specific STMS , Where V01 is Quality and V02 is production system; When I do consistency check from solar_project_admin tcode for project created, it shows no errors ;
but when i try to activate the charma and click on "refresh" button , it throws following error
"Warning: Problems occurred during synchronization" ;I have checked the logs in SLG1 for object "/TMWFLOW/CMSCV" ; but
there are no errors except warnings for BC Sets , Can you pl guide what might have gone wrong ?
All the RFC's are working fine and there is no authorization issue in solution manager.
Thanks
Swati

hi,
for the CTS activation you must do all the below,
1. SMSY --> landscape creation
2. RFC Creations
3. Client Specific TMS configuration
4. Prj --> CTS activation.
go through the below doc,
[https://websmp209.sap-ag.de/sapdownload/011000358700000657692007E/eCTS_ChaRM_SP12.pdf|https://websmp209.sap-ag.de/sapdownload/011000358700000657692007E/eCTS_ChaRM_SP12.pdf]
jansi

My Time Capsule has stopped working after I tried to configure an extended wifi network

My Time Capsule was working fine until I tried to configure it with an extended bridge. Now either the amber light is solid or the solid amber comes on for awhile and then goes completely out.
The AirPort Utility says that there is no internet connection, the DNS settings are wrong, and that the disk need to be repaired. Using Disk Utility, the Time Capsule does not even show up so that I can repair it.
I am running OSX 10.7.5, and besides the Time Capsule I have a Vonage Motorola (VT2442-VD) for VOIP, which of course is not working because it was connected behind the Time Capsule.
I'm in Italy and cannot call Apple directly since I now do not have phone service.
Any suggestions how I can check/repair the Time Capsule, and then configure it properly to my satellite broadband?
Thanks for you help.

How old is the TC?? The LED should never go solid amber.. that indicates disk failure.
Or completely out.. that indicates power supply failure.
As a note you cannot extend wireless to a non apple wireless router... you can only plug in by ethernet and use the TC to create a wireless network.. this can have the same name as the main router,, same SSID in other words and same security but set to different channel..

Using Logic with virtual guitarist

I'm trying to use logic with virtual guitarist. Do you use this as an instrument or midi? When I use it as an instrument virtual guitarist does not follow logic tempo. And when I use it as a midi track I can not play it since virtual guitarist is not a hardware. Any sugestions?

VG is a virtual instrument. If you want to use it within Logic, you need to convert the .vst into an AU (Audio Unit) so Logic can see and use it as .vst isn't supported anymore in OS X.
The .vst to AU conversion is best done via the VST-AU Wrapper application, available from the http://www.fxpansion.com website or your local dealer. No, I don't work for them, but I use the wrapper extensively for older .vst instruments in Logic.
If you need more detail information about this (and Virtual Guitarist in particular), you may want to check the VG forum here : http://bornemark.se/forum/viewforum.php?f=4&sid=a4bd0b1112e9d381261c09d8160fc1f7

Error while configuring jsf with ajax using rich faces.

hi all
i am trying to configure jsf with ajax. i am using rich faces for it.
but when to trying to configure some simple program i am unable to start the application i am getting the following error.
SEVERE: Parse Error at line 5 column 17: Document root element "faces-config", must match DOCTYPE ro
ot "null".
org.xml.sax.SAXParseException: Document root element "faces-config", must match DOCTYPE root "null".
and
SEVERE: Can't instantiate class: 'org.ajax4jsf.application.AjaxStateManager'.:org.ajax4jsf.applicati
on.AjaxStateManager:exception:null
Apr 29, 2008 11:48:15 AM org.apache.catalina.core.StandardContext start
SEVERE: Error listenerStart
my sample code is
<h:inputText value="#{Page1.zip}">
                      <a4j:support event="onkeyup" reRender="zip"/>
</h:inputText>
<h:outputText id="zip" value="#{Page1.zip}"/>
java code is page bean is
private String zip = null;
    public String getZip() { return zip; }
    public void setZip(String zip)
       this.zip = zip;
    }the jar i am using is richfaces-api-3.2.0.SR1.jar, richfaces-impl-3.2.0.SR1.jar, richfaces-impl-3.2.0.SR1.jar
in web.xml i have included following code.
<filter>
<display-name>RichFaces Filter</display-name>
<filter-name>richfaces</filter-name>
<filter-class>org.ajax4jsf.Filter</filter-class>
</filter>
<filter-mapping>
<filter-name>richfaces</filter-name>
<servlet-name>Faces Servlet</servlet-name>
<dispatcher>REQUEST</dispatcher>
<dispatcher>FORWARD</dispatcher>
<dispatcher>INCLUDE</dispatcher>
</filter-mapping>

Sounds like a problem with faces-config.xml (something to do with the faces-config element). Here's an example that works:
<?xml version='1.0' encoding='UTF-8'?>

<faces-config version="1.2"
              xmlns="http://java.sun.com/xml/ns/javaee"
              xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
              xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-facesconfig_1_2.xsd">
<application>
    <locale-config>
      <default-locale>en_GB</default-locale>
      <supported-locale>en_GB</supported-locale>
    </locale-config>
</application>
<managed-bean>
    <managed-bean-name>bean</managed-bean-name>
    <managed-bean-class>com.test.Bean</managed-bean-class>
    <managed-bean-scope>session</managed-bean-scope>
</managed-bean>
</faces-config>

Newbie trying to configure xfi with virtual

Similar Messages

Maybe you are looking for