NEWBIE-Using Mighty Mouse scroll wheel to control Color's SMH wheels

Hi, new here & new to Color, working thru Ripples iTunes Color tutorials right now. Loving Color so far. I hope to be back with less rudimentary questions one day but here's the 1st:
Lacking a dedicated hardware interface, I'd hoped the Might Mouse scroll wheel would drive the shadow midtone and hilight wheels. I've tried various permutations in system prefs but no dice. Have I missed something? Thank you.

nadsta, I've found using a ShuttlePRO2 unit very handy. It's cheap, and I can map whatever shortcut I want, and then I use a Wacom tablet for the color wheel adjustments.
I've mapped the ShuttlePRO to jump between grade 1-4, and the different rooms I use the most (primary in/out, secondaries, color fx), turning grade on/off, set/delete keyframes and adjust keyframe type, two buttons for ALT/OPT and SHIFT modifiers which comes in very handy for selecting and adding to a color selection (in secondaries for instance) or holding ALT while click-and-drag in the color wheels and different parameters around the interface.
It's not perfect, but I can at least do some things in less time than I would using the keyboard.

Similar Messages

  • Can I use the mouse scroll wheel for zooming the timeline?

    Howdy...
    As a recent convert from Vegas, one of the best features that I miss is using the mouse scroll wheel to zoom into and out of the timeline..
    Anyone know a way I can set this up in FCP6?
    Thanks...
    -Ben

    Yes.
    (I know I'm gonna get flamed by the pros here who will advise NEVER to use third party plug-ins, but... I've been a heavy user of FCP for years and NEVER had any problem with this, so here goes:)
    Install USB Overdrive, and program your mouse with:
    - wheel_up to cmd+plus (=zoom in) and
    - wheel_down to cmd+minus (=zoom out).
    I actually use clickedwheelup and clickedwheeldown for this zooming in and out, keeping the plain vanilla wheel_up and wheel_down for, well, up and down (or clip_left and clip_right on the timeline).
    Nice thing is, it then works in the Viewer and Canvas to zoom in and out, too.
    HTH.

  • I updated to the latest version and now I do not have the page controls at the right hand side and bottom and can only move the page up and down using the mouse scroll wheel. I also cannot see the whole page I am trying to view.

    When I open the web browser I cannot see the whole page and I cannot move the image sideways and must use the mouse scroll to move up and down.

    Try the following:
    1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
         User/Home/Library/ Preferences folder.
    2 - delete the contents the following folder:
    User/Library/Containers/com.apple.iPhoto
    3 - reboot, launch iPhoto and try again.
    NOTE: For Mavericks, 10.9,  go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
    where you can check the Show Library Folder checkbox.

  • Use of mouse scroll wheel in Forms 6i runtime

    Is there any way to make the mouse scroll wheel work in Forms 6i runtime? Does it work in some areas and not in others? Ultimately, the user would like to use the scroll wheel to navigate through rows in a block instead of dragging the scrollbar. We also have data in a particular row and column that has scroll bar. I'm hearing that in some instances it works, don't know if I believe, not sure if it's workstation dependent. Client workstations are generally XP.
    cheryl

    I think (can't ckeck at the moment) that an animated gif will only run when deployed on the web (you need the JVM)
    As I said, I think this is the case but can't confirm it at the moment.
    Regards
    Grant Ronald
    forms Product Management

  • Vista64 Bluetooth Mighty Mouse scroll wheel SOLVED

    I don't know if this has been answered elsewhere, but I spent a great deal of time trying to figure out why my scroll wheel wasn't working in Vista64. If you're running a "Pro" model, use your system restore disc 1 and look for the boot camp installer for 64. No problems, no "KeyAgent" or "MacHAL" installation problems at all. Hope this helps and isn't redundant.

    Could it be that your mouse has dirt inside affecting the ball to scroll? I had a mighty mouse for just over a year when it stopped scrolling down. They are very difficult to take apart and clean. It would also void its warranty. If it's still within its warranty I would take it back and ask for a replacement. I'm not very impressed with the mighty mouse.

  • Mighty Mouse scroll wheel support

    Is it possible to use a Mighty Mouse's scroll wheel to scroll in Shake as in any other OS X program? It's not responding for me (nothing scrolls, and I have to manually drag the scroll bar up and down). Is there a fix for that? (Even better, can I also use the scroll wheel for panning around the node view, timeline, etc. instead of middle-click+dragging? That gets tedious.)

    O~ho! I got it to work, actually. You can install SteerMouse (http://plentycom.jp/en/steermouse/) instead of Apple's driver, and you configure it so that, at least in Shake (it allows per-application configuration), the scroll wheel is set to "x scroll" instead of "acceleration scroll". Huzzah! Shake's interface is now a bit less awful!

  • Mighty Mouse scroll wheel in 10.3.9

    Hi,
    I just got my bluetooth mighty mouse yesterday, It works great even though
    I only have 10.3.9. All the buttons work, the only thing that is not working for me is the scroll wheel moving from right to left. Has anyone had this problem? Is there any software that will help with this? The only thing is, i don't what anything to happen to any of the other buttons, because everything else works great!
    Thanks
    Dave

    I believe the booklet that came with the mouse explains what features work with each version of Mac OS X (I can't remember the page - I don't have the booklet to hand at the moment); I would expect the scroll ball to work with 10.3.9...

  • Pages scroll extremely slowly when using my mouse scroll wheel, regardless of the settings I have for autoscrolling or smooth scrolling.

    It scrolls about 1 line for every 5 notches I turn the scroll wheel.
    I have to either use the scroll bar or the arrow keys. All other programs like Internet Explorer and Word, Photoshop, etc. scroll normally with the scroll wheel. Currently I am using the mouse on a Wacom Intuos 4, but the same issue occurs with the pen using the "pan" function and also with a run of the mill corded microsoft intelimouse.
    Also, I'm having this issue on 2 computers, one lenovo laptop, Win 7 professional 64 bit, and a Lenovo desktop with Windows 7 ultimate 64 bit.

    It scrolls about 1 line for every 5 notches I turn the scroll wheel.
    I have to either use the scroll bar or the arrow keys. All other programs like Internet Explorer and Word, Photoshop, etc. scroll normally with the scroll wheel. Currently I am using the mouse on a Wacom Intuos 4, but the same issue occurs with the pen using the "pan" function and also with a run of the mill corded microsoft intelimouse.
    Also, I'm having this issue on 2 computers, one lenovo laptop, Win 7 professional 64 bit, and a Lenovo desktop with Windows 7 ultimate 64 bit.

  • Mighty Mouse Scroll wheel disfunction

    Hello
    The scroll wheel on my mighty mouse does not function correct at the moment. When I scroll down, it works, although it skips a bit up and down. But when I try to scroll up, either nothing happens, or it scrolls down. This has happened before, where I've just turned it over onto a piece of paper and pushed around the scroll button a little, until it worked. But this time, that won't do the trick. It also makes a faint clicking noise.
    Any suggestions?
    Rune

    Hi, try a little rubbing alcohol on a piece of soft cloth (handkerchief) give the ball a good 360°
    on the cloth..up/down & roundNround..If the MM is under warranty or you have Applecare Apple will replace it for you..I believe your local store will exchange if you have your computer details & receipt etc....L

  • Mighty Mouse Scroll Wheel

    Hi Gang
    How's everyone doin?
    I suspect the tiny little button wheel in the middle of the mighty mouse is not working properly? I can get it to scroll upward, but not downward. And it does it's job as it goes from side to side. Just can't get it to scroll downward.
    Time for a new mouse with scroll wheel?
    BTW - went to system preferences everything's checked there correctly.
    Thanx guys
    Mike
    Trailer;
    http://vimeo.com/7340608 < Put new photos on the trailer page

    Hi-
    The scroll balls get gummed up with dirt and skin oil.
    There are a few ways to clean it, as this search reveals:
    Clean Mighty Mouse.
    Start with the paper strip tick, then move on to disassembly if necessary.

  • Help with Bootcamp (Speakers and mighty mouse scroll wheel not working)

    So I just loaded bootcamp onto my macbook but I'm having some problems.  First, my scroll bar on my mighty mouse doesn't work when in Windows.  The only help I've seen online has been for those who haven't yet loaded windows.  Can I still download a driver that will help me out?  My speakers also are not working and the Realtek driver that everyone said worked for them didn't work for me.  Advice?

    Sorry, this is not possible in the current version of Firefox, but we have an open bug report where we are tracking this issue here:
    https://bugzilla.mozilla.org/show_bug.cgi?id=686228
    With luck it will be fixed in a future version.

  • Custom Right-Click Options with Mighty Mouse (scroll-wheel)

    Is there a way to add custom actions to the contextual right-click menu on the mighty mouse? Or a program that will allow me to do that? I am looking to add a script or other items to the right-click menu options.

    this has nothing to do with the kind of mouse you are using. you can add items to the right-click menu by creating a service. you can make your own using automator.
    also, some applications install services when you install the applications and there are a number of built in services available. you can check system preferences->keyboard->keyboard shortcuts->services and activate the ones you want.

  • Use mouse scroll wheel to change numeric control

    Does anyone know if and how I can use the mouse scroll wheel to change numeric control values?

    Another option would be to change the timeout.  This would avoid the timeout event every ms when the mouse has not "entered" the contol.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines
    Attachments:
    Mouse Scroll.vi ‏14 KB

  • How do I get the scroll bar back to the right side of the screen and how do I get the mouse scroll wheel to work again?

    Yesterday the scroll bar on Firefox was moved from the right to the left of the screen and the webpages do not scroll when using the mouse scroll wheel.

    Reset the pref <b>layout.scrollbar.side</b> to '0' or set to '2' to place the scroll bar at the default right side.
    See:
    * http://kb.mozillazine.org/layout.scrollbar.side
    * http://kb.mozillazine.org/about%3Aconfig
    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]
    * [[Troubleshooting plugins]]

  • Overlay an item over an activex control and/ or disabling the mouse scroll wheel

    There seems to be several references in the discussion forum to placing a picture control over an activex item to prevent the activex item being selected etc.
    The thing is, I can't seem to do it: the activex control is always on top, no matter what I do and no matter what control, or decoration I use.
    What am I doing wrong?
    Failing that, is there another way of stopping the user getting access to the activx control?
    Essentially what I want to do is stop them accidentally scrolling through the control's pages with the mouse scroll wheel. I've stopped them accessing the scroll bars, BUT it is still possible to use the scroll wheel unfortunately.
    Something else I tried was a tab control: placing the activex control on a page and then trying to make the page on top transparent. Needless to say that didn't work....
    Andy

    Important questions:
    What ActiveX control are you using?
    I'm using the PDF activex control to display a PDF on the front panel of my VI.
    What version of LabVIEW are you using?
     I'm using LabVIEW 7.1
    What "control pages" are you talking about?
    The pages of the PDF: it has several pages. If a mouse is held over it the user can scroll using the scroll wheel, or if they right click they can access the Adobe menu.
    It's these that I'd like to inhibit them doing.
    Thanks
    Andy
    Attachments:
    Display PDF 7.1.vi ‏98 KB

Maybe you are looking for

  • How do i unlock my ipod 4G because ive forgotten my passcode

    basically today i decided to change my passcode and now ive forgotten it sooooo connected it to itunes and because its locked itunes wont find it :/ so any ideas ? and if i hold down the power button and the home it just turns off so yeah plz help

  • Preview.app Glitch throws Display Back to First Page

    OS X Yosemite v10.10.2; Preview.app v8.0 I've discovered a very annoying glitch in Preview.app; in which when I select all pages after I showed thumbnails, and then mark all pages with [Command]+[A] and unmark a view pages by holding the Command Key

  • Can i use Fireworks created Nav Bar in iWeb?

    I am new to iweb and want to have a specific layout for my website. I don't want any of the templates, so I used fireworks to create a Navigation bar with buttons that have prelinked to the "standard" html, i.e. home.html, photos.html. can i use this

  • Why doesn't Search across files work in web dynpro perspective?

    Hello, I rely on the Files Tab of the Search popup a lot to search for occurence of text in files. So far, I've been doing all J2EE development and the Search functionality works great in the J2EE perspective. What I do is select the Development Comp

  • Table cells - Problem with merged cells

    Hi I was experiencing very weird behavior with my tables until I realized that it was caused by merged cells My script gives a dialog which allows the user to choose from which column to start and from which row. As the script iterates through the ce