Newbie website needs help

brand new iPad, synced to iTunes, updated to ios5 was working fine. this morning only original programs will open. please help, I'm a total newbe

If none of your downloaded apps are working but the Apple built-in ones are ok, then try downloading any free app from the store (as that appears to reset something) and then re-try them - the free app can then be deleted.

Similar Messages

Two computers for the same website, need help!

Hello everybody, I really need some help here!
I am working on a website at the office and to save some
time, I've send by email all the files related to it to my pc at
home. When I tried to open the pages at home, I've found problems
with visualizing the pictures, there are squares instead! The
pictures are at the same position where I've put it, but there no
images, just those squares with a draw of a tore picture inside. I
want to know if this is trivial when the files are transfered to
other computer.
help me please

"Murray *ACE*" <[email protected]> wrote
in message
news:ebdgtt$cta$[email protected]..
> Computer A, and Computer B.
>
> Locate the site's root folder on Computer A's hard drive
using Windows
> Explorer/Finder. Zip that folder and all its contents.
Email that zip
> file to computer B (so to speak). Unzip it in the same
location it was on
> computer A. Start DW on Computer B. Create a new site
pointing to the
> root folder you just unzipped.
>
> Alternatively, you could also export the site definition
from Computer A
> and add it to the zip file. In that case you would just
IMPORT that site
> definition into Computer B's DW after unzipping the file
and you're ready
> to go.
>
> --
> Murray --- ICQ 71997575
> Adobe Community Expert
> (If you *MUST* email me, don't LAUGH when you do so!)
> ==================
>
http://www.dreamweavermx-templates.com
- Template Triage!
>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
> ==================
>
>
> "brunoak" <[email protected]> wrote in
message
> news:ebdg32$c1v$[email protected]..
>> Thanks Murray, but could you be more specific?? I'm
still learning and I
>> am not familiarized with some concepts! please??
thanks again
>
>
Even better although not to easy to setup would be to have an
FTP server
running on your home PC.
With the FTP server allow access to the folder on your home
PC where the
Office PC website is to be mirrored.
(Choose a good username and password to maintain the security
of your home
PC).
Then back on your office PC you would simply enter your home
PC's FTP
address, username and password in the site preferences
'Remote Info'.
Then you simply use Dreamweaver's Synchronise function to
maintain and
syncronise files between PCs.
Martin.

NEWBIE THATS NEEDS HELP ( wiped blueberry)

Firstly may i say hi to every one and now to my problem
ok your all going to think im a complete wazzuk
im new to the blackberry (not a clue) i was given an 8800 which didnt come with any disks
but was told i can dl them on this website , which i did..the latest desktop application
anyways....it told me i need to update my phone and like an **bleep** i pressed next
about half way thru the eraseing and downloading my pc came up with an ERROR
and now im left with just a white screen with a small box in the middle and a cross going thru it
can some 1 please tell me i can fix this and how or have i just broken the thing for ever
ive looked on the pc to see if it had backuped up the device(which i dont think it had)
so there must be a way i can download a new os on the blackberry
please can any 1 help
many thanks in advance
Solved!
Go to Solution.

Is your exact model the 8800?
The installation of the Operating system is in the link below along with good instructions.
http://www.blackberryforums.com/general-8800-series-discussion/183426-latest-os-8800-4-5-0-203-4-5-0...
Follow those directions to the point.
If you have a problem connecting to the BlackBerry:
You will need to use JL_Cmder to wipe the device and subsequently load the OS to the device. Follow the instructions here:
http://www.blackberryfaq.com/index.php/How_do_I_wipe_the_BlackBerry_using_Jl_Cmder%3F
If JL_Cmder does not work, follow this instructional:
http://www.blackberryfaq.com/index.php/What_to_do_next_if_Jl_Cmder_will_not_connect_and_wipe
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Newb here, need help! just check out what i have, make reccomendations please!!

Windows xp 32-bit,
4 gigs ram,
dual sli 7200 nvidia cards,
60gb internal hardrive, 1.5 terabyte external hard drive (brand new, very empty)
Recorded 24p and 60i on a Canon XL-2 (miniDV)
IEEE 1394 firewire connected from pc to uploading device. Unfortunatly i borrowed the xl-2 from school, and am trying to capture from a panasonic pv-gs36 i borrowed from a friend (only friend with a device that records with a miniDV cam).
I have been working fine on premier, very smooth when i import files, but when i tried to capture, as soon as i hit capture it freezes my whole set up, i have to manually restart my pc. I need to capture and export these clips to quicktime so i can edit in final cut at school (as requested by my instructer) the project is due in exactly one week, and the edit bays are always full which is why i opted for capturing at home with premier cs4.
Im in panic mode now though, cause of this freeze issue. I'll have access to an xl-2 for the remainder of the week if the panasonic cam is the problem, but if not, please let me know!! ill go out and buy a new graphics card if that really is the issue... but i cant afford the quadro....which is why i opted for adobe premier instead of avid.
im thinking its freezing because i recorded on an xl-2 and am trying to capture on this panasonic cam... could this be why?
i installed premier on the 60 gig internal hard drive...should i uninstall it and install it on the external 1.5 tb one? should my settings be a certain way when i start a new project? Please help out a stressed out student during finals week! I will be super grateful to any info anyone can provide. thanks again for all your time and effort =)

I'm unsure if the external drive is eSATA. I did buy it a few days ago 1.5 tb for 129.99 at fry's...good deal. What are the advantages of having an eSATA? The drive i have is a seagate Free agent-Desk external drive, model number st315005fda2e1-rk
<img src="http://www.thinkdigit.com/uploads/seagate_freeagent_desk.jpg">
Again, total noob here...
the external is USB 2.0, and yea, i only have 1 firewire port. Also, something i failed to mention is...I actually run my computer off my 42 inch samsung hd tv (720p native). When i was installing the whole production suite it asked me to get a moniter with higher resolution, but the click top continue installing anyway button was there so i went for it. Could this be the problem?
I'm fairly sure i recorded in standard play with 2 channel audio with the canon, so im starting suspect it is this dinky panasonic dv cam thats causing me all this headache.
also....please dont insult me too much...but:
whats a panny?
Whats scenalyzer?
annnnd finally, no input on the cards? I was thinking that was going to be the problem for sure. The cards are great for gaming but im not really sure what kind of cards are (at least decent) for editing and capturing.
I appreciate your help, ive been looking at the boards all night and this morning, i noticed you are kind of a superstar around here Millaard, so i really appreciate the effort =)

Newbie here needs help with features.

I hope I'm doing this right.
Problem #1
With my storm when I make a call the key pad for the phone goes away. This is problematic especially when I'm checking voice mail. It is prompting me to enter my access code and i'm trying to get the key pad to display itself. what do I do? Can I lock the key pad to display while making calls?
Problem #2
When entering a contact or a message that has several strings of number how do I get the Number pad to stay displayed so it does not toggle back to the alpha key pad?
Problem #3
Removing unused applications.How do I do it?
Problem#4
I am on an enterprise server how can I remove email accounts? I get two displays of the same emails comming in. They all come into a application marked messages then I get a second display with just messages for the email address showing on the application box. It is confusing and a duplication.
Thanks to anyone that can help me resolve these problems!

Greetings, and welcome to the BlackBerry.com Support Forums.
It is always helpful to receive help, to include your exact BlackBerry device model # and carrier name, so that when you have a question, that information won't need to be asked up front. Also, stating your device Operating System version is normally another common question, found on your BlackBerry at Options > About, third line down, looks like "v4.x.x.xxx"
1. When on the call, yo'll see at the lower left a keypad symbol. Press it to bring up the keypad.
If that doesn't appear or work, answer those above. There was one OS release way back that had a glitch of not allowing the keypad to show at all when calling.
2. Message.. as in email? Press and hold the lower left numeric symbol on the keypad a full second the numeric keypad will lock in. Press the Alpha character at the lower left again to revert back.
3. Most can be removed simple at Options > Advanced > Applications. Scroll to the application name and press Menu > Delete. Later OS releases will be at Options > Applications.
4. Answer my questions above about the model and OS. The Storm1 and 2, according to the OS release vary on this.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Newbie who needs help!

I require someone who has a lot of patience as I am a complete dimwit when it comes to computers and I am about to thorw mine out the window. Unfortunately when I brought my mp3 a friend set it all up and i didn't take any notice. I am now trying to download more songs and for some reason nothing is transferring. I have also managed to delete all the previous songs off my player but they are still in the Creative Media Playlist but not on my actual mp3. HELP!!!!!!!!!!!!!!!!!!!!!!!!!!

To start the thread, you might want to let others know which MP3 player do you have and the current player firmware version.
Jason

Newbie really needs help

Hey. i just bought an iMac, and i`m having some trouble. I still don`t understand much of Macs, `cause i just came from windows. So i`m humbly asking for some help.
I wanted to copy my dvds, i have some stuff of my own recorded, with menus and intros, and i wanted to copy from dvd to dvd. How the heck can i do that?! I tried creating an image in .dmg, but it gets too big to record in a simple dvd with 4,7GB. I tried using MacTheRipper, but i could understand nothing about it! It recorded my dvd files in a VOB extension! What the heck is VOB?!
I would really apreciate if someone could explain me from scratch how to do these things...
thanx

Popcorn is only for copying video DVDs. It doesn't do CDs. After rebate, Toast 7 is only about $20 more than Popcorn (or $40 before rebate). The only reason I would purchase Popcorn today is if my Mac didn't meet the system requirements for Toast 7 and I had to have an application that can compress ripped dual-layer video DVDs to burn on single-layer discs. Go to Roxio's site and read the description of Toast 7's features and you'll see that the extra $20-40 is well invested.

NEWBIE BUILDER NEEDS HELP

I'm having a problem with my newly built P.C. that I hope someone can help me with. When I turn the power on, the P.C. powers up for about 5 seconds and then there is one beep sound and then the power goes out on it. What is causing this problem and how and what do I check?
My System info;
ASPIRE X-Plorer case,
MSI 945G Platinum mobo,
Intel Pentium 4 630 Prescott 800MHz FSB 2MB L2 Cache LGA 775,
GeIL DDR 2 Series 1GB 240-Pin DDR2 SDRAM Unbuffered DDR2 533 (1 Stick),
COOLER MASTER eXtreme Power RS-430-PMSR/P ATX12V Max: 400W, Peak,
DVD Burner NEC ND-3540 A,
Western Digital WD 200 Caviar SE Serial ATA Hard drive,
Your cooperation and assistance is highly appreciated, thank you for reading.

Thanks to all that responded. I think I found out what the problem was. It was probably those little wires for the reset switch and power on etc... I think I had the negative and positive backwards, I disconnected them and used a magnify glass to make sure that I can see what I was doing this time and bingo. The P.C. powered up and stayed on.
However I have another dillema now with my X-FI Sound card (Extreme music) When I install it in the 1ST pci slot the computer didn't detect new hardware installed. I tried all 3 of the slots and nothing. I even tried to install the software but that also stated something like it couldn't find such hardware on my P.C. My XFX Geforce 6600 PCI-e card works fine however. I don't know what to do here so I hope someone on this forum can help get this thing running on my newly built P.C. By the way, this card does work because I installed it in a Dell Dimension 4500 that I also own and no problems at all. This is really driving me nuts. Thanks again for reading.

Newbie really needing help

I am learning to use flash and the first project I choose was
a fireworks display. I am doing ok except one area that I keep
getting stuck in. Using the paint bucket fill tool. I am trying to
fill an area that I made with the line tool with a gradient fill. I
Have made sure there were no gaps in the drawing and have followed
the books instructions but I can't get it to fill. The project had
another area that was to be filled with a solid white, and couldn't
get it to work there either. Could someone please tell me where I
am going wrong? It can't be that hard. Ir maybe it can. Any help
would be appreciated. Thank you

Hi Akersrus,
Dont worry when we are here to help you. If you are very sure
that there are no gaps in the shape you created then maybe your
process of creating and adding the gradient was wrong. Lets see a
small tutorial to do so -
Open Flash (I use Flash CS3 and AS2.0 here - doesnt really
matter for illustration though)
1. Take the pencil tool and draw a closed shape. See that the
shape is closed by simply filling a solid color in it, and then
remove the color. Good idea for beginners.
2. The 'Fill Color' palette should be selected, now press
SHIFT+F9 , or goto Window -> Color.
3. A Color tool window pops where you can edit gradients and
do every possible gradient effects or styles. Select the 'Linear'
dropdown, and change the default colors to something you like in
the color selection pallete in the same tool window down below.
4. Once the effects are all set in the color window, select
the paint bucket tool, drag on the object you had drawn, you will
see a line forming which indicates the direction of the gradient,
let go, and you will see the gradient formed. You can edit the
existing style in the COLOR window anytime and then drag again on
the object.
Hope this small and humble tutorial helps you. And see that
you don't have any serious gaps in your illustration!
Enjoy Flash!

Hobby website needs help on menu look

Hello,
I created a joomla website for my girlfriend as amateur. I'm quite happy with the result besides some minor css mistakes and some ' if I knew that before I would haves'.
But the most annoying part is I’m trying to think of something to replace the plain text menu with.
So i was wondering if you guys could point me into some inspirational road!
The site is dutch though. It's an information page for dogs. Where you can eat, go on vacation or just health questions about your dog.
dogtails.nl
Best regards,
Pim

Where you can eat...
You eat dogs?
I think your menu is fine but dark purple on black is very hard to see. Another brighter color for the rollover might be a better choice. Kuler Colors is a good place to find color pallets.
https://kuler.adobe.com/
Since this is a Joomla! site, you should stick with Joomla! Extensions. Especially since your menu is most likely driven with PHP.
http://extensions.joomla.org/extensions/structure-a-navigation/menu-systems
Looks like a fun site. Good luck with your project!
Nancy O.

Problem posting comments to websites, need help

Hello. I am using Safari 5.1.7 and OSX 10.6.8 and everything appears up to date. When reading a story on ESPN.com for example and i scroll down to the comments i click on 'add comments' and there is nothing there to allow me to add comments Also when i click 'view all comments' again there is nothing there. Can anyone help? Maybe a java issue, although like i said, all appears up to date. Thanks. Oh, I tried it on my daughter's macbook pro with lion and it was fine.
i posted this in the snow leopard area as well...

hi again.. in January it was a facebook problem.. there were no lightroom updates.. same now.. so you can go to facebook and fill in that form That Paul Diming talks about in a previous post
I have reported this problem to Facebook using their own problem reporting mechanism.
It would help if everyone who is having this issue should do the same. Here is the process:
1. Click on the pull down on the far upper right of the screen.
2. Click "Report a Problem"
3. Click "Something Isn't Working"
4. Select Pages on the pull down.
5. Explain the problem.
6. Upload a screen image. I captured an image of trying to create a new published collection with the pull down showing no Page Albums listed.
It might help for Facebook to know that it isn't just me having the problem.

Newbie! Need Help wit choice! Lots of Questions! PLEASE HELP

Have been a PC user for ever and recently have seen the appeal and performance of macs.
I am shortly going to college and have been reading hundreds of reviews and discussions on the different portbales available.
I will be using the portable for
- word processing
- internet and email
- music
-DVD's
-light graphics work
- light video work
Currently on AMD anthlon XP 2700+ with 1 GB RAM
I ruled out the 12" ibook as no superdrive and 17" powerbook as too large.
The ibook seems nice, worried about processor speed, will it cope with graphics and video and fast enough for encoding etc? Also worried about the tightness of the resolution, is the screen good in comparisson to powerbook. Also thought about DVD;s not being in widescreen. Also is the availabe work space enough?
The powerbook 12" seems nice because of it's compactness. The screen depth seems more than !5" and is that a problem? Is the 12" powerbook which has superdrive got a large enough visible work space?
The 15" Powerbook seems great, it's got nice screen and same size as old windows laptop (though resolution much higher), have read a lot of problems about very hot powerbooks (how big a problem is this?), i have alsp read about latch issues,(bad?) and is there a serious issue with a gap between the display and keyboard? Also have read lots of issues about the logic board failing and is this really common, as being student don't want to have to fork out vast sums of money and applecare is steep.
What would you recommend? Could spend up to £2000, would rather not spend it all(sorry don't know wot that is in $'s)
Just loved the OS and was all set and now am a little anxious as seems quite recurrent problems exist. Please help and offer any ideas, tips, solutions, experiences and anything that helped you chose ur mac!

I just bought my powerbook after a summer's worth of work, four weeks ago. Other than a few quibbles (mainly things I haven't figured out how to do on the mac, since i'm new to the OS) this 15" is awesome... It's fast, it's small, it has a widescreen, and... THE KEYBOARD LIGHTS UP (jaws drop left and right when the lights go out)...
It seems very capable, and hasn't failed me yet, knock on wood. The latch works fine and there is no issue with keys touching the screen.
I was worried about the heat issue too, so I thought ahead and bought a Vantec cooling pad. for $35 on Newegg.com, it has adjustable fan speeds, and a 4 port USB hub, which is VERY handy. It will get warm if i'm using it on my lap, but not enough for the computer's fans to turn on. Besides, I think the heat argument is a little weak. Sure, they may get hot, but we're talking about a high performance, VERY thin aluminum computer... Aluminum transfers heat very easily, so expect it to seem warmer than a PC laptop. Plastic doesn't transfer heat nearly as nicely, but even so, if you touch a pentium 4 based laptop that has been running for a while, it'll be just as warm. And, they're twice as thick, to accomodate the fans to cool that bugger!
As for the logic board, i think the main issue is memory being bumped out of place, or improperly installed... I'm sure that if some users just took out their memory stick, and carefully tried to reinstall it, they'd work fine... i'm not saying that the memory issue is a fluke, rather I think that some people may see that other people have had logic board failure in the past, and automatically assume that is there problem... Regardless, i've added my own 1gb stick from Crucial, and it works fine.
The powerbook 15" is an awesome choice... I'm still learning how to use the OS, which is a little scary at first (since i'm used to things being far more complicated (WINDOWS)), but it's very intuitive, a pleasure to use, and a great machine... Goodluck with your decision

Verizon Website Needs Help

No message other than this website is user-unfreindly

I know it would be a major undertaking but a switch to vBulletin 4.2.0 for the support forum would be a quantum leap IMO.
If a forum member gives an answer you like, please give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem. Thanks !!!
http://forums.verizon.com/t5/Verizon-net-Email/Fix-for-Missing-Inbox-sent-folders-etc-with-Internet-Explorer-11/m-p/647399

First WebSite - Need Help

Hit there i am wanting to create my first website and will be using Iweb - can you tell me if its easy to add flsh and java to websites via iweb?
Also can anyone offer any advice oh ho to write some first time java scripts?
thansk

rock03:
Welcome to the Apple Discussions. You'll have to add the flash and java code post-publishing. Check out this site for some tips: http://varkgirl.com/Varkgirl/Basic%20HTML%20Additions.html
Do you Twango?

Need Help with Outlook 2007

I am a newbie and need help on how do I set up my Blackberry 8330 Curve to work with the Intenet Explorer & Outlook 2007? Your help wpould be greatly appreciated.

Hi,
Email:
Set up a BIS account (you'll need to contact your provider to ensure that your paying for a BIS service!)
Email will arrive to the messages icon. This is a COPY of the ISP emails before they arrive to the Outlook. Or you can use Desktop Redirector and Outlook but you will need to leave your PC running all the time for this to work, so I dont see the point. Just use the BIS instead.
REMEMBER: Once you download the email to your Outlook, the BB handset cant delete them from the server - the Outlook is not the server - your ISP has the mail server.
Explorer:
Blackberry Browser/INternet Browser/WAP portal are different browsers that are available on the handsets. Rememebr that all mobile devices do NOT access the Internet as on your PC! They access a subset of the internet effectively called the Mobile Internet. Web pages need to be specially formatted to be viewed on the small screeened devices and as s cuh cannot be viewed correctluy. Modern webpages cannnot be viewed at all as they run java/javascript/flash programs on the browser to show ads/other efffects on the webpoages and so these will not work on the MBB.
Dont expect a Full laptop screen on a Tiny Monbile handset. That way you wont be dissapointed when your expectations are dashed(!)
Your carrier will be able to connect you to the Blackberrry Web browser service.
Hope that helps.
Checked out my Blackberry FAQ's and Links to Needed Articles here
http://darkeen.homelinux.com/index.php/Blackberryfaq

Newbie website needs help

Similar Messages

Maybe you are looking for