Newby question. Trying to fill a section but using fill and/or stroke only changes line colour

Hi,
Been trying to work this out for hours now so if anyone can help I will be forever thankful!
Basically, I traced an image earlier, expanded it then wanted to change the line colour. For some reason I couldn't get this to work even though I've done it in the past. So, I used the magic wand to select the line then dragged it into my new document and changed the line colour.
Now, I want to change the fill on certain sections, however when I change the stroke it changes the colour of the line and when I change the fill it changes the colour of the line.
I'm not sure if that makes sense or if anyone can help based on that but I can post pictures or something if that would help?
I also understand that the magic want thing might be where I've went wrong at the very start maybe?
Thanks for any help at all!

I don't know if that helps you understand at all?
For example I want to fill the inside of the square but when I'm hitting the fill and stroke buttons they're just changing the colour of the line.
I think I might just start from scratch again! Don't know where I've went wrong.

Similar Messages

  • I can't get some song on my iphone they work off of the computer but they wont show up on my phone they are in the "on my iphone" section but they gray and have a gray dotted circle next to them i have tried every thing I just want them on my phone HELP!

    I can't get some song on my iphone they work off of the computer but they wont show up on my phone they are in the "on my iphone" section but they gray and have a gray dotted circle next to them i have tried every thing I just want them on my phone HELP!!!

    You have posted to the iTunes Match forum, which your question does not seem to be related to. Is your question concerning iTunes Match or syncing with iTunes via USB?

  • Question re switching data off abroad but using Wi-Fi

    I bought an 8900, as it had wi-fi, and I had assumed when I switched data off when roaming, I would be able to use wi-fi to connect to the internet.
    Just tried an experiment at home, and switched data off under mobile network options, connected to my home network via wi-fi, and tried to use my browser. I then got an error message saying couldn't connect to the internet.
    Is there anyway to accomplish what I am trying to do? I use Gmail for mail, so had assumed I'd be able to switch off my data package while roaming, and just connect to Gmail via the web using wi-fi when abroad.
    TIA

    yes... absolutely yess... it will work i tried it and it works... switched off my Mobile Network(GSM) and tried to connect on a wifi hotspot voila! i can send & received email use all BB Application such as BB Mesenger and Yahoo messenger,
    Now the question is "switching data off abroad but using Wi-Fi" yes it should work and it is documented Accessing BlackBerry Data Services Using Wi-Fi Networks
    All you need is an internet connection thru WIFI
    1. A Wi-Fi connection profile must be added for each hotspot or home Wi-Fi network.
    Wi-Fi connection profiles can easily be configured via the Set Up Wi-Fi wizard. The
    correct service set identifier (SSID), security type, security key or credentials are
    necessary for this configuration. Additionally, hotspot users may need to have
    additional credentials or agree to the hotspot provider’s terms and conditions for use.
    These can be entered when using the Set Up Wi-Fi wizard.
    2. In most cases, no other additional configuration will be necessary. Once connected,
    authenticated, and authorized to use the hotspot or home Wi-Fi network, all
    provisioned BlackBerry data services should be available. This is accomplished by
    establishing an SSL connection via port 443 to the BlackBerry Infrastructure
    but one thing im not sure if the data plan or packages are consumed also or does it affect my BIS data plan
    For hotspot or home Wi-Fi network users

  • I've tried everything suggested on forums, but my iMessage and FaceTime are still not working. Any suggestions?

    I've tried everything suggested on forums, but my iMessage and FaceTime are still not working. Any suggestions?

    Hi katz2010!
    I have an article for you here that may help you find those apps again:
    Downloading past purchases from the iTunes Store, App Store, and iBooks Store
    http://support.apple.com/kb/ht2519
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • Trying to update my apps but the Apple ID is wrong. Changed it in settings and rebooted. Still didn't work.

    Trying to update my apps but the Apple ID is wrong. Changed it in settings and rebooted. Still didn't work.

    You need to delete them and then download them from the correct Apple ID. This may require repurchasing paid applications.
    (94094)

  • HT201210 My phone keeps turning itself off and I have to hold down the buttons to reset it today I tried to do the same but no luck and it just froze with the apple sign or the battery power sign what can I do?

    My phone keeps turning itself off and I have to hold down the buttons to reset it today I tried to do the same but no luck and it just froze with the apple sign or the battery power sign what can I do?

    See this article how to go about restoring your device from recovery mode:
    http://support.apple.com/kb/HT1808
    Good luck!

  • HT201318 I'm trying to purchase a plan on my phone and it will only let me choose the $100. upgrade

    I'm trying to purchase a plan on my phone and it will only let me choose the $100. plan which i dont need

    Yes, but if you delete the iCloud account and start again, don't you have to wait 90 days for everything to start syncing??  I've been having this problem for months and no one seems to be able to figure it out.  I used to have one Apple ID (which was not an email address) and then when iOS came along....and iCloud, they force you to use your email address as ID ....which actually sets up a SECOND Apple ID.  I have a Mac, iPad, iPod touch and iPhone.  the Apple techs tried to delete the iCloud accounts so that they all said the same thing (email address ID) but then I had to wait 90 days.  the 90 days just passed and nothing is automatically syncing yet.  I still think there are 2 accounts but if I delete all again.....it's going to be another 90 days (for security reasons, I was told).  This is a real pain in the butt.

  • My iPhone 5S is using 2.5GBs of storage for the camera roll.  I deleted all but 190 photos and this did not change.  My other devices cannot backup to iCloud due to the volume on my iPhone.  Any ideas?

    My iPhone 5S is using 2.5GBs of storage for the camera roll.  I deleted all but 190 photos and this did not change.  My other devices cannot backup to iCloud due to the volume on my iPhone.  Any ideas?

    Try turning off the Camera Roll option in Settings>iCloud>Backup & Storage>Manage Storage>Your device. Then turn it back on again.
    Cheers,
    GB

  • HT1386 my Ipod will not connect to my computer it worked yesterday but not today and it is only a new ipod touch, it will not even be recognised on my itunes but yet it can charge off my computer. need help!

    it worked yesterday but not today and it is only a new ipod touch, it will not even be recognised on my itunes but yet it can charge off my computer. need help!

    iOS: Device not recognized in iTunes for Mac OS X
    or
    iOS: Device not recognized in iTunes for Windows

  • I don't live in Italy anymore but in Switzerland and I can't change this information to do my payment

    I don't live in Italy anymore but in Switzerland and I can't change this information to do my payment. How can I do to change the country ?

    Change/Verify Account https://forums.adobe.com/thread/1465499 may help
    -Credit card https://helpx.adobe.com/x-productkb/policy-pricing/membership-subscription-troubleshooting -creative-cloud.html
    -or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html
    -email address https://forums.adobe.com/thread/1446019
    -http://helpx.adobe.com/x-productkb/global/didn-t-receive-expected-email.html
    -http://helpx.adobe.com/x-productkb/policy-pricing/change-country-associated-with-adobe-id. html

  • HT4993 Hi I got 32 gb iphone 5 sprint line from America but using Turkey and send sms problem

    Hi
    I got 32 gb iphone 5 sprint line from America but using Turkey and send sms problem

    Did you request that Sprint unlock the phone?
    If so, did they?  Did you follow the process to complete the unlock by restoring as new?
    Did you get the message indicating the iPhone is unlocked?

  • I'm trying to access my Army OWA using Firefox and a CAC reader but continue to get a blank page, how do I remedy this?

    I can access AKO, but can not get to the Army's OWA at https://rw3.army.mil/Exchange/

    Try:
    * [/questions/752709] Having problems configuring FireFox to use a CAC reader

  • My iphone calendar stopped syncing with outlook 7 thru the cloud. I clicked on tools, trust center, add ins. icloud add in had been disabled. I tried to re enable it but was told that this could only be done by administrator. I am the admin. Help????

    My iphone calendar stopped syncing with outlook 7 thru the cloud. I clicked on outlook tools, trust center, add ins. I noted that icloud add in had been disabled. I tried to re enable it but got a message that this change could only be done by administrator. I am the administrator. Help???? Any ideas?

    I do not believe this. I have been going nuts trying everything as in prior posts, and this has been a problem for users at least since 2010. I had this problem a long time ago and didn't pay too much attention to it because it was my iPad, and I depended on my BB a a base calander to feed Outlook. I became very concerned within the past week when I switched my BB to iPhone 5s, and was carrying both because I still needed to carry the BB for new calander enteries to sync up to Outlook 2007.
    I had followed http://support.apple.com/kb/HT1925 and delete the apple s/w and re-installed. But according to the previous post, it appears that the issue was in the data - which was not deleted during all these deinstalls nor overridden with the new installs.
    I am a XP user, so my files are in documents and settings/(username) both application data and \local settings\application data, but I also have safari and quicktime installed as well and didn't want to just blow entire high level folders if I didn't have to.
    So I followed http://support.apple.com/kb/HT1925 then purged several apple folders in my windows profile and this definitely blew apple computer\preferences away. What I did was a little clumbsy, and desperate, but it worked. I am finally back in business.
    However, I would like to see someone fine tune this and determine if it was just the preferences folder that needed to be deleted so that iTunes needed to rebuild it, or if there were other filoes that were apparently corrupted away, just to get this to the minimum number of steps to fix the issue.
    BUT THANKS - This has been the most HELPFUL thread to get me syncing agai!!!!

  • Trying to Live Webcast on YouTube using AME and external mic on apple computer

    Hi. Im an ADOBE forum newbie Ive tried to flick through the forums to find a solution to this but cant. Basically i am trying to webcast on YouTube via my mac but using an external mic.
    I have a macbook AIR. And i recently bought a behringer 302USB mixer to input my audio from the microphone i have to the computer via the USP port.
    When i look in the system preferences/sounds, it recognises the USB mixer and it shows that sound is being input by the volume level indicator moving.
    However, the microphone isnt recognised as an audio input in adobe media encoder (im presuming this is the same as FLME .. i couldnt find a forum for flash live media encoder) ... it seems to automatically use INTERNAL MIC ...
    WHen i decide to try and see if the USB set up works in garage band, it records fine ... same for quickime .. so it seems to pick up sound and record to computer .. what i seem to be struggling to do is direct the sound to the media encoder for it to  record the sound from the USB mic .. as opposed to the internal mic ..
    I tried  a little trick by attempting to redirect via SOUNDFLOWER .. then into AME via soundflower ... it recognised soundflower .. but the audio came out silent ... so it once again didnt seem to recognise (or process the audio live ...
    I need to use an external mic as my internal mic picks up too much noise .. and the external mix is very directed in what sounds it picks up ...
    Does anyone know a fix?? .. this is driving me mad ...
    cheers
    Billy

    It's not only the files in the Programs folder which are installed by most Windows applications, but also the files in other folders (e.g. Programdata) as well as the Registry settings, which are required to run an application. Installing an application in a folder, coping it and running it from somewhere else was possible in the good old DOS times.
    André

  • Sectioning videos using iMovie and iDVD

    I did my first conversion of some video from Mini-DV to DVD using my new iMac yesterday. I read the "Getting Started" tutorials for iMovie and iDVD and successfully burned a DVD. It came out good in the end, but I'm not sure I did things the best way. I wanted to section the video so when I watch the DVD I can click on a "button" from the menu for whatever section I want. So, I transferred all the video from the camcorder to iMac. That was easy. Then, I went into iMovie and marked off the sections of the video I wanted as "favorites" and it put a green line above it, then I selected the option for it to only display the favorites. So, it was easy to edit out the bad parts. Then, I dragged it all from the Event Library to the Project Library. I went to Share-Media Browser and clicked on Publish. Then, I went into iDVD and was able to get the video into it. But, I couldn't get it into sections like I wanted.
    So, I went back into iMovie and did a File-Duplicate Project and named it with a "-1" at the end. Then, in the Event Library I selected the first section of the video (so it had the yellow boarder around it) then dragged it to the Project Library. Then, I did a Share-Media Brower and clicked on Publish. I went back to the original and did a File-Duplicate Project and named it with a "-2" at the end, and repeated the whole thing for the next section. I did this for each section, "-3", "-4", etc. Then, I went into iDVD and was able to get the video into sections like I wanted. I renamed the "-1", "-2" stuff to what I wanted and burned the DVD.
    Did I do this right or did I do this the hard way? I have iMovie '08 7.0 (471) and iDVD '08 7.0 (1068).
    Someone told me that the "sections" I'm referring to are called "chapters". I did a search for chapters and the only reference I can find is in the "iMovie '08 Getting Started" document where it says "Click Import. You can also import video from a project created in iMovie HD. … All chapter markers are also lost".

    I would consider the usage of iMHD6 plus a slightly different 'structure' of workflow and final DVD ...
    'problem' with Chapters, as they are implemented in iDVD, is, that they really functioning just as a bookmark... you jump directly to some specific position in timeline.. but then, the disk play 'til the end of a movie... (showing the next and the next and... chapters...)
    iDVD allows sub-menus, think of it as 'Folders' ... which also could keep Folders..
    create a movie, showing the whole program/dance...
    now, select (in iMHD6) the few clips which show 'Right Hand Pass'
    in the Export/Quicktime/Full Quality dialog of iMHD6, check the box 'selected clips only' ...
    now, you get a/many .movs on your harddrive, with all the individual segments ...
    due to lossless export, you can import that short clips into new iM projects and add content.. a slow-mo, a chart, some narration, recordings of other dancers doing the same 'move' etc ...
    in IDVD, switch to 'map view' .. illustrated how-to here:
    http://www.apple.com/ilife/tutorials/#idvd-create-67
    now, create a structure for YOUR how-to... on top should be a button for the movie which shows the whole dance; create a sub-menu containing other sub-menus for 'spins', 'turns', 'passes' (= I have NO idea of Square Dance ); inside each sub-menu item (which is a 'Folder'), you place the concerning clip(s) (drag'n drop/choose form Media) ...
    structured that way, you are allowed to add much more than just a chapter = a part of your movie; editing a 'standalone' clip of your section allows to 'process' that part, as mentioned above: you can repeat it, you can add slowmos, you can add stills/charts/paintings, explaining specificly that 'move', add a narrated and a no-audio version, whatever ... there's a nice plug-in from geethree.com for iMHD6, *Slick 6* (click here), called 'White Board', which allows drawings on videos..
    when the 'chapter', which is now a clip/movie on its own, is finished, the dvd will jump back to the menu/submenu... and the viewer is allowed to watch it again, choosing the next one, a different one, or jumping to 'top level' to choose a different section or watching the whole dance...
    only limitation: all movies added together should stay under 120min..

Maybe you are looking for