Newer version of the zen xt

In a older thread someone said something about a newer version of the zen xtra with a fixed headphone jack and I was just wondering when the "newer version" of the zen xtra came out.

I can't remember the exact date, but it seemed to coincide with a change in packaging. From the box to the plastic blister type package, with a case that has a cut-out for the window. No guarantee that one in this package has the reinforced headphone jack though.

Similar Messages

What was the last firmware version for the Zen Micro before M

I would like to know what was the last firmware version for the Zen Micro before the MTP firmware?
Please make sure you are 00% on this.
Thankyou.

I think it does, but I'm not sure; since I wanted MTP, I only used .x firmware long enough to save the original Creative test files (with MediaSource, not ZMME) before upgrading to 2.x. And yes, I had to li've with 2..02's shorter battery life until 2.20.05 came out.
May I ask why you want to go back to .x firmware? The only thing that will get you is the ability to use it with Win98SE/2000/Me--but only if you can install Creative drivers on every PC you use it with. MTP requires WinXP SP or 2 and WMP 0, but doesn't need any Creative software at all to work. (Microsoft has made an MTP driver for Win98SE/2000/Me, but it requires customization and may not be supported by other software. I'm tinkering a bit with the customization part right now.)
There are other pitfalls in changing Micro firmware families, in either direction--you'll lose all the files on your Micro, you'll have to install a different ZMME (and I've heard non-MTP ZMME isn't quite as full-featured as MTP ZMME), and you'll need a new plug-in for MediaSource to work.

Now I can not Intal Creative Center again because there is new version of the program

Hello
I have zen 100 mp3 player
Install all and made 4 playlist......OK
Update all .....Ok
One day Creative Center stop functions (no contact with music files in the program )
I uinstall the Creative Center in frustration :-(
But to install the program again stops and the install tell that there is a new version of the program a I have to stop install
Link : http://www.mediafire.com?j3xjtiofsmem5xs
(rtf printscreen only to tell it stops install)
How do I INSTALL IT AGAIN ????
PC Vin7
JUAN
:smileyindifferent:

Hi,
You probably need to make sure that all Creative related software applications are removed before you attempt a reinstallation. Please write to support if you need further assistance with this.

When the message arrives, the message tone sound that many times. How this problem can be solved? I installed the new version, but the problem is not resolved, the future is to be taken into account in the new version of this?

When the message arrives, the message tone sound that many times. How this problem can be solved? I installed the new version, but the problem is not resolved, the future is to be taken into account in the new version of this?

I'm not sure I understand the question, is the message tone going more then once?
Turn off repeat message alert here:
settings > notifications > messages > repeat alert > never
Some people have found this does not stop the repeat miessage tone,
if you are one of those then I suggest you contact Apple:
http://www.apple.com/feedback/iphone.html
They may not respond, but hopefully will fix in uodate if enough people complain.

Cisco AnyConnect VPN won't install, says There is a newer version of the AnyConnect client already installed

I had an issue with my Cisco Anyconnect VPN not working, so uninstalled it. I've tried a new install and now I get the message "There is a newer version of the AnyConnect client installed" and it won't tell me install it at all. I've gone through various recommendations on the site included this :-
Go to "Regedit" and search for "Deterministic Networks" and delete it.
HKEY_LOCAL_MACHINE \SOFTWARE\Deterministic Networks
Search with the following keywords in the registry, under "Uninstall" or "Components" folders and delete any related entries.
Vpnapi
Vpngui
Cisco
CVPND
CVPNDRA
Ipsecdialer
Source: https://supportforums.cisco.com/message/3728011#3728011
But I've still got the same problem, and just cant find anything to help !

Disable Internet Connection Sharing (ICS) and then try You can disable ICS in two ways:
Per Adapter:
Click the Start button.
Click on Control Panel.
Click on View Network Status and Tasks
Click on Change adapter settings
Right-click the shared connection and choose Properties
Click the Sharing tab
Clear the Allow other network users to connect through this computer's Internet connection checkbox
Click OK
System Wide:
Click the Start button (Windows' orb)
Type: services.msc and press ENTER
Double-Click on Internet Connection Sharing (ICS)
Change Startup Type to Disabled
Reboot the computer
You can now try reinstalling the WiscVPN client again

How can i remove "A newer version of the app" pop up

I keep getting the following pop up message everytime i open iTunes or download a song.
"A newer version of the app "APP NAME SHOWN HERE" already exists in your iTunes Library. Are you sure you want to replace it with the one you are moving?"
Its really annoying to have to click on "Don't Replace" for every app I have. How can I stop this pop up message?

Download on another system, zip it, transfer to the PC's via a USB stick (or move it to an online service like Dropbox).
You may find that the PC has software that blocks it anyway, so it is safest to speak to your IT staff & ask them to install it.

How Can I update my app new version to the registered devices

Well, we have developed an in-house app using the Unity3d Game Engine. I'm using a Developer Enterprise account, and have already created the proper certificates, registered the devices (7 ipads) and generated the provisioning Profile. I have already clicked in the 'build an run', and the Unity Engine builds the app, that after is opened at the Xcode. I havel already fixed the bugs, and the app is working properly at the ipads.
The problem is, I will need to Update the app, and I need to Update them without have to get them and build them at my own Mac, since they do not stay with me. I've been strugling with that for a while. I have downloaded the provisioning profile and sent by e-mail to one of the ipads, the one I'm using to test, and instaled it, but the version of my app have not been updated.
I checked on my app icloud capabilities. The page about the Update of in-house apps is not very clear(http://help.apple.com/iosdeployment-apps/mac/1.1/#app43ad802c), and I'm new in the development for IOS.
How can update my app at this Ipads? Is there any step-by-step to follow, more eplanatory that the link above?

I didn't explained it correctly, I mean without getting the ipads, not the source code. I mean, at every time I need to launch a new version of the app, how can I update it through the internet, because I have installed my app running it at the ipads with the xcode, by usb. I'm using the enterprise program, so, as far as I know, the update is not through apple store.
The ipads are in use, and I'd like to update them without have to get them to install it myself. Hope I have explained it better this time. Thank you for your help.

How can I ensure newer versions of the same page are opened every time I visit

I am advised by my Uni IT screen to ensure that firefox is set to check for 'newer versions of the same page with every visit to the page'. This is to ensure proper functioning inside the University's internal tutorial program.

# Type '''about:config''' into the location bar and press enter
# Accept the warning message that appears, you will be taken to a list of preferences
# Locate the preference '''browser.cache.check_doc_frequency''', double-click on it and change its value to '''1'''
http://kb.mozillazine.org/Browser.cache.check_doc_frequency

HT1420 I have the new version of the macbook pro and I cannot find authorize this computer anywhere on itunes. I have read the directions multiple times and still cannot find it. Please help!

I have the newer version of the macbook pro and I have read the directions on how to authorize your computer to let you download previous song purchases from icloud onto your laptop, but I cannot find where it says "authorize this computer" at all. I have looked for it everywhere and still cannot find it. Please help!

Authorization and Deauthorization
Macs: iTunes Store- About authorization and deauthorization.
Windows: How to Authorize or Deauthorize iTunes | PCWorld.
In iTunes you use the Authorize This Computer or De-authorize This Computer option under the Store menu in iTunes' menubar. For Windows use the ALT-S keys to access it. Or turn on Windows 7 and 8 iTunes menus: iTunes- Turning on iTunes menus in Windows 8 and 7.
More On De-authorizing Computers (contributed by user John Galt)
You can de-authorize individual computers, but only by using those computers. The only other option is to "de-authorize all" from your iTunes account.
1. Open iTunes on a computer
2. From the Store menu, select "View my Account..."
3. Sign in with your Apple ID and password.
4. Under "Computer Authorizations" select "De-authorize All".
5. Authorize each computer you still have, as you may require.
You may only do this once per year.
After you "de-authorize all" your authorized computers, re-authorize each one as required.
If you have de-authorized all computers and need to do it again, but your year has not elapsed, then contact: Apple - Support - iTunes - Contact Us.

How can i upgrade my iPhoto 7.1.5 to a newer version? the download 8.02 will not work as i need 8 and that isn't available on download on the site?

How can i upgrade my iPhoto 7.1.5 to a newer version? the download 8.02 will not work as i need 8 and that isn't available on download on the site?
Thanks x

You can upgrade to iPhoto '11 with OS X 10.8.5 by purchasing an iPhoto '11 DVD from Amazon, eBay or other source - or you can upgrade your OS to Mavericks for free if your system meets the requirements and then purchase the upgrade to iPhoto '11 version 9.5.x from the App store - in either case backup first in case of problems
LN

How to remove preinstalled files of adobe photoshop from my mac mini so that i can install a new version of the same software.The previous version was removed using the app cleaner software.Could not continue installation bcoz of earlier files

How to remove preinstalled files of adobe photoshop from my mac mini so that i can install a new version of the same software.The previous version was removed using the app cleaner software.Could not continue installation of the new version because of the existance of files from the previous version.plz help

What "app cleaner software" ? I ask because installing Photoshop over a previous version has never been a problem. Perhaps your difficulty stems from another source, eg. "cleaner software" ?
If you look in your hard drive, at the root level there is a Library. In there is a folder called Application Support, and in that you will find a folder called Adobe. Files from your previous version are there.
However, I urge you to call Adobe support to make sure you are not doing anything that would mess up other Adobe applications.
http://www.adobe.com/support/connect/connecthostedsupport.html

New version of the LabHSM Toolkit for Complex Event-Driven Development is Now Available!

A new version of the unique toolkit is now available for download. As announced earlier, LabHSM makes it possible to easily create and then maintain complex event-driven applications in LabVIEW as a collection of HSM-driven active object VIs using a higher level of abstraction and agile software development methodologies. These active object VIs are created based on a universal Hierarchical State Machine ( HSM or statechart ) template. Therefore, all your code looks similar regardless of its functionality!
So, what’s new in version 1.1?
• "No hands" block diagram modifications! Version 1.1 actually creates, renames, and removes actions on the block diagram as you define, rename, and remove them in the editor! (No, it can't fill in all the details for you, but it can do some, if you think ahead, by replicating similar actions.)
• Two new screens, Events Usage and Actions Usage, (available in licensed copies only) clearly show where (in which state(s)/transition(s)) and how (is it an entry action, exit action or event handling action?) a particular event or action is used. Moreover, if after selecting an instance on the list, the Go To button is pressed, it makes the main screen jump to respective location in the HSM structure. In the case of Actions Usage screen, the respective action is also displayed on the block diagram. Thus, these screens provide two more different cross-sections of the HSM data set and two additional ways to navigate it – now along the Actions and Events dimensions too instead of just the state tree in the first version.
• Version 1.1 can duplicate events or actions, which helps when you've got several that are similar. Changes in the events and actions lists are reflected immediately on the main screen and on the block diagram (which solves the previous problem of deleting a renamed event or action when it's still in use).
• The Events and Actions List Editors are no longer modal and neither are the Events and Actions Usage screens, so you can have all the panels and the block diagram visible and move freely among them as you build your HSM (a good argument for an even larger monitor).
• When you save an HSM file, version 1.1 automatically adds the .hsm extension if you leave it out and it remembers the last directory you used.
• The Loaded VIs utility now can open and close block diagrams (if they are not protected with a password) and display only VIs with modal front panels, if desired—useful for quickly finding and closing accidentally opened (e.g., from the hierarchy window) modal VIs. Make a modal version of this utility and keep it on the Desktop for this purpose.
• A new example of a simple hierarchical state machine and two more excellent tutorials from Paul F. Sullivan (SULLutions.com) are included into the package. The tutorials are also available online. The overview article has also been extended.
As before, the LabHSM toolkit is available for UNLIMITED PERIOD trial. Please visit http://www.labhsm.com for details and download. The site also contains references which you may want to check to learn more about hierarchical state machines and active object computing.
Stanislav Rumega
NI Certified LabVIEW Developer
H View Labs
http://www.labhsm.com
[email protected]
US Toll-Free Phone/Fax: 877-570-8684

I am not really sure if Azure support this but its worth to make your configuration file to support .NET 4.0
$PShome\PowerShell_ISE.CONFIG and $PSHOME\PowerShell.exe.config will be not existing.
So you can make an entry in configuration to support .NET framework 4.0
like shown below
$config_text = @"
<?xml version="1.0"?>
<configuration>
<startup useLegacyV2RuntimeActivationPolicy="true">
<supportedRuntime version="v4.0.30319"/>
<supportedRuntime version="v2.0.50727"/>
</startup>
</configuration>
$config_text| Out-File $pshome\powershell.exe.config
$config_text| Out-File $pshome\powershell_ise.exe.config
Close PowerShell Console and open as administrator.
Try loading the modules back and let me know.
Regards Chen V [MCTS SharePoint 2010]

[svn] 1011: Change for supporting newer version of the concurrent library.

Revision: 1011
Author: [email protected]
Date: 2008-03-28 16:42:52 -0700 (Fri, 28 Mar 2008)
Log Message:
Change for supporting newer version of the concurrent library. When you remove, you need to
provide the return value from the schedule method, not the arg you passed in. The api is
a litte awkward in this regard in that the return value is not a Runnable but the remove
method expects a Runnable so this code is a little defensive to be sure no one is using
a version of the code where the return value is not a runnable.
Modified Paths:
blazeds/branches/3.0.x/modules/core/src/java/flex/messaging/util/TimeoutManager.java

...It was so bad my English?

IDLE event problem with newer versions of the flash player

Greetings,
I have an issue that seems to be related to newer versions of the flashplayer in how they handle IDLE events. I have an IDLE event handler that works as expected with flashplayer version 10.0.45.2. With flashplayer 10.2.153.1, the IDLE event does not fire when my flex application is not in focus (browser minized, different browser tab in focus,etc...). Or when it fires, it's usually after a longer lag than normal. Has anyone experienced this issue? Thanks

Thanks for the reply. Are there any fixes/workarounds for this issue? Say I have a need to create a timer that fires every 10 minutes regardless of whether the player is in focus or not, how do I implement such a timer? Same goes for the IDLE event, I want to be notified if the application has been idle for X minutes regardless of whether it's in focus or not.Prior to 10.2 (and per your reply, 10.1), this all worked fine in flex without needing to adjust for the player being in focus.

SSIS 2014 Custom Component: "The component metadata could not be upgraded to the newer version of the component."

I recently upgraded my set of custom data flow components to use the SQL 2014 SDK as we are upgrading to SQL Server 2014 RTM. The only change I made to my custom components was to change the references to the following DLLs from version 11.0 to version
12.0:
Microsoft.SqlServer.DTSPipelineWrap
Microsoft.SQLServer.DTSRuntimeWrap
Microsoft.SQLServer.ManagedDTS
Microsoft.SqlServer.PipelineHost
After rebuilding my assembly, adding it to the GAC, and placing it in the appropriate directory structure (the 120\DTS\PipelineComponents directory for both the x86 and x64 versions), my components no longer display in the SSIS toolbox in SSDT. In
addition, whether loading up my packages in SSDT or executing them via the SSIS catalog (in SQL 2014), I get the series of error messages below. I do have a PerformUpgrade method implemented in my packages that has worked successfully through previous
component upgrades. I also found this seemingly relevant thread (Custom
SSIS Connection Manager error message in SSIS 2014 (RTM): The connection manager '' is not properly installed on this computer.) and tried modifying the extensions.xml script, but I was unsuccessful with this approach (though I could have done so
incorrectly).
Validation error. DFT Process Changes: DFT Process Changes: The component metadata for "xxx, clsid {874F7595-FB5F-40FF-96AF-FBFF8250E3EF}" could not be upgraded to the newer version of the component. The PerformUpgrade method failed.
Error loading xxx.dtsx: The "xxx" failed to cache the component metadata object and returned error code 0x80131600.
Error loading xxx.dtsx: Component xxx, clsid {874F7595-FB5F-40FF-96AF-FBFF8250E3EF} failed to initialize due to error 0xC0047067 "The "%1" failed to cache the component metadata object and returned error code 0x%2!8.8X!.".
Error loading xxx.dtsx: The component is missing, not registered, not upgradeable, or missing required interfaces. The contact information for this component is "".
Error loading xxx.dtsx: The component metadata for "xxx" could not be upgraded to the newer version of the component. The PerformUpgrade method failed.
Validation error. DFT Process Changes SSIS.Pipeline: The component metadata for "xxx, clsid {874F7595-FB5F-40FF-96AF-FBFF8250E3EF}" could not be upgraded to the newer version of the component. The PerformUpgrade method failed.
Thanks in advance,
Ben

Hi Ben,
Please also update the reference to the SSIS assembly Microsoft.SqlServer.Dts.Design located in C:\Program Files (x86)\Microsoft SQL Server\120\SDK\Assemblies folder to the version 12.0.0.0. Besides, rename IDTSxxxx110 objects to IDTSxxxx120.
It may also be the factor that the custom mapping file is not created correctly. You can make a copy of the built-in mapping.xml.sample file, rename its extension to XML, and then edit its <ExtensionMapping> attribute:
<ExtensionMapping tag="mycustom extension"
oldAssemblyStrongName="MyCustomAssembly.MyCustomTask, MyCustomAssembly, Version=1.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91"
newAssemblyStrongName="MyCustomAssembly.MyCustomTask, MyCustomAssembly, Version=2.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91" />
Then, we need to upgrade the packages, and SSIS will read all the XML mapping files placed in this directory during upgrade.
References (although the blogs are written for SSIS 2008 by Matt, we can still refer to them for SSIS 2014):
http://blogs.msdn.com/b/mattm/archive/2008/02/01/custom-extensions-in-sql-server-2008.aspx
http://blogs.msdn.com/b/mattm/archive/2007/06/05/katmai-custom-components-and-upgrade.aspx
Regards,
Mike Yin
If you have any feedback on our support, please click
here
Mike Yin
TechNet Community Support

Newer version of the zen xt

Similar Messages

Maybe you are looking for