Newest firmware for WRT54G version 5.1??

I am a newbee, so please help.
When I download the firmware from this site it says the newest is 1.01.1??
But when I want to forward a port it says firmware prior to 1.32 won't work.
What new firmwire do I need and where can I download it?
By the way, will it also work on a WRT54G version 5.0??
Best regards Xaykev

hi , the firmware version 1.01.1 , will work with both the wrt54g v5 and the wrt54g v5.1
try this and then go ahead with the port forwarding.

Similar Messages

  • Right firmware for WRT54G version 2

    Hi,
    I need to reflash a WRT54G version 2, but on the support page I can not find any firmware. Only for version 2.2. is it the compatible also with version 2?

    Leonardo you can visit http://homesupport.cisco.com/en-apac/support/routers/WRT54G then go to Downloads you will be able to see the Version 2 from the drop down.
    Thanks!

  • Trying to upgrade firmware for WRT54G V6 on Windows 7

    Since buying a windows 7 PC, my WRT54G V6 is dropping connection a lot more than it should (1/hr).  Because of this i thought to update the firmware.  I have downloaded the new .bin and accessed 192.168.1.1, but when i try to move to the ADMINISTRATION page all i get is ascii chars and no admin page, the only pages that actually work are the basic setup and DDNS setup.  For info i'm currently running Firmware Version: v1.00.9
    Asked for help online and got as far as downloading Tftp,0, but that onlyworks to the point where it tells me ''unable to get responses from the servers''
    can anyone help or do i just get a new router ???
    Thanks in advance, les
    Solved!
    Go to Solution.

    Try to upgrade the router's firmware using TFTP utility..Download the TFTP utility and save it on the desktop.Also Download the firmware for WRT54G v6 and save it on the desktop.
    Follow these steps to upgrade the firmware on the device : -
    Double click the TFTP.exe file and click run.
    For Server- Enter the IP Address of the router that you assigned.  By default, the router is 192.168.1.1...
    For Password- Enter the password you assigned the router. By default, the router’s password is “admin”.
    For File- Click the triple “…” button and browse for the .bin firmware file...
    Click Upgrade button to start upgrading.  A progress bar should show up to show the progress.
    Once the Upgrade is done press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
    **Make sure your modem is connected to the router on internet port and the computer on the ethernet port of the router while you run the TFTP program.

  • No downloadable firmware for my version.

    Today, I decided that, since my WRT54G v7 router is getting notably old, I should update the firmware. After taking some time to read the documentation, I went to download the firmware.
    Or well, at least I tried. There is no Version 7 firmware.
    Can someone please tell me why there is no way to upgrade for me (I tried v8, but obviously, that doesn't work..)? Is there any other way to upgrade?
    Thank you.

    To download the firmware for your router click Here. This firmware is for WRT54G version 7.

  • Why there is no option for WRT54G Version 7??? the versin...

    Why there is no option for WRT54G Version 7??? the versin no. jump from 6 to 8??Which firm ware should  I download?

    For US no vesrion 7 is released. Might be in other countries.

  • NEWEST FIRMWARE FOR NOKIA 6230i

    HI THERE CAN ANYONE TELL ME WHAT IS THE NEWEST FIRMWARE FOR THE NOKIA 6230i BEFORE I GO AND GET RIPPED OF .
    I DONT WANT TO GET MY FIRMWARE UPDATED SOMEWHERE JUST TO FIND OUT THAT THIS ISNT THE NEWEST RELEASE.
    HELP HELP HELP....
    IT LOOKS LIKE I AM GOING TO HAVE TO PAY FOR MY FIMWARE TO BE UPDATED JUST TO GET RID OF THE PROBLEMS IN MY PHONE THAT I FEEL NOKIA SHOULD BE RESPONSIBLE FOR WITHOUT ANY OUTLYING CAST AT ANY TIME ..
    TO MAKE IT CLEAR TO NOKIA FIRMWARE SHOULD BE POSTED FOR ALL UPGRADEABLE PHONES NOT JUST THE SMALL HANDFULL THAT IS POSTED AT PRESENT.
    AND THE CHARGE FOR UPGRADING THE FIRMWARE TO REMOVE NOKIAS MISTAKES SHOULD BE WAVED AS IT IS YOUR MISTAKES.
    OR IN FUTURE BEFORE ANYONE BUYS A NOKIA THE COMPANY SHOULD POST CLEARLY ON ITS WEBSITE THAT THE PRODUCT MAY BE FLAWED DUE TO INCOMPETENT SOFTWARE PROGRAMMERS.

    Hi there,
    1 GB is no problem for 6320i. Be sure you buy the right memory card (e.g. Transcend MMC Plus. Firmware updates can be done at Nokia Service Points. Note that updating is free during the warranty period, but costs about 20 euros after warranty. Or you can hope that 6230i is supported by Nokia Software Updater, but this is not clear to me yet.

  • After updating my iphone 5s to 7.1 ... the keyboard is crashing and it takes too long to respond, what is the solution? if there any link from which we can download the original 7.1 firmware for A1533 Version?

    After updating my iphone 5s to 7.1 ... the keyboard is crashing and it takes too long to respond, what is the solution? if there any link from which we can download the original 7.1 firmware for A1533 Version?

    Restoring the iPhone will reload its firmware.
    Plug the iPhone into (the current version of) iTunes on your computer.
    Let it sync.  Then choose "Restore" from the iPhone's summary page in iTunes.

  • Can't Find Firmware for WRT54G V5.1

    Purchased the WRT54G week ago, looked for latest firmware (just wanted to have the latest one). Looked on linksys, couldn't find the firmware for version 5.1 (i saw the version of the router on the sticker on the bottom underneath the Linksys logo, it says model no: WRT54G V 5.1). Do i have to use another firmware type instead of searching for the 5.1 ?

    the version 5 firmware will work with the version 5.1

  • Can NOT download v4.21.1 Firmware for WRT54G v4

    There is something wrong with the Linksys download site.
    Can someone confirm this by trying to download that specific firmware?
    http://www.linksys.com/servlet/Satellite?c=L_Content_C1&childpagename=US%2FLayout&cid=1115416835852&...
    When trying to download the latest firmware for my WRT54G v4, I get nothing but an empty .zip folder (0 bytes).
    I also get some sort of server error while attempting to download the "version info".
    I have tried three different browsers to be sure.
    Hmmm....I just successfully 'test' downloaded other firmware versions, so I know it's got to be the link for this particular firmware I need.
    When will this be fixed?
    Or, where else can I get Linksys v 4.21.1 firmware for my WRT54G v4?
    Thanks
    Message Edited by thenut on 02-06-200709:06 AM

    Download the firmware file for the WRT54Gv3. v3 and v4 are compatible. v5 and later use a different kernel. If you select v3 in the downloads you download the file "WRT54GV4.0_4.21.1_US_code.zip" which is the same filename you would get for the v4. I guess it is just a configuration error on the server which breaks the links for the v4...

  • New Firmware for WRT54G v5

    Guys,
    If you're still having problems with your v5 router, Linksys has just recently released the latest firmware which is version 1.00.9. You can download the file on the link given below.
    http://www.linksys.com/servlet/Satellite?c=L_Download_C2&childpagename=US%2FLayout&cid=1115417109974...
    Message Edited by RDL on 05-20-2006 05:07 PM

    I'm using version 1.02.8 but currently trying to hack the router to use DD-WRT or Open WRT for a project. Every time I try to upload the firmware the router says  "Bad Archive". I tried with via Ethernet and with a TFTP client but neither of them worked. Any suggestions or ideas?
    My router is a Linksys WRT54g v5.
    Thanks

  • New Firmware for WRT54G ver6 Posted

    Saw new firmware posted on the download page for wrt54g ver6 dated 7/2/07, the new version is 1.02.2  good luck people.

    I get "Bandwidth value is out of range 64--10000" when enabling QoS. When I set to Upstream Bandwidth to Manual, the problem goes away. But when I switch back to Auto, I am able to save the settings initially. But when I try again, the problem comes back.
    Wonder what's wrong... this is no issue with firmware 1.00.9.

  • Firmware for WRT54GS

    I am using a WRT54GS, the firmware ids v3.37.7. Isn't it a bit too low base on the discussion in the forum. 
    Jonathan

    I have a linksys WRT54GS version 1 and currently is loaded with firmware 2.07.1. Do you where I can get the latest firmware for this model?
    The firmware is not available on the linksys for download.

  • Newest firmware for N73: 0539335

    Could someone tell me what the newest firmware is for this code?

    Current release for your product code is:
    Version: 4.0726.2.0.1
    You can check it here.
    http://europe.nokia.com/A4305060
    Phone List: (in order of appearance)
    Nokia 101 (remember them?), Ericsson 388, Nokia 7110, Ericsson t39, Sony Ericsson p800, Nokia N80, HTC TYTNII, HTC HD2, Nokia Lumia 920

  • Firmware for WRT54G ver. 7

    I am not sure that is it my computer have a problem but i could not find the firmware for version 7 ... there is only firmware for 1,1.1,2,2.2,3,3.1,4,5,6,8 no 7 ...
    So anyone can kindly tell me where can i get the firmware for version 7 ?

    well...you need to go to www.linksys.com/uk ... the firmware for the wrt54g v7 should be in that list ..

  • Upgrade Firmware for WRT54GS V.6

    I am new to the wireless world and just purchased the WRT54GS V.6 router and it says I have downloads for this firmware. I have copied so many instructions I don't know where to start first. Can someone give me some advise as to what to do? Thanks for any information!!!

    Hi, you seem to know the way around the router, so I hope you help me. I downloaded  the new firmware for v6. and installed it. It call my attention the fact that the firmware started to load slowly, saying that it will restart, and about 40% it congratulate me for the work done, but no restart and after I restarted manually, no wireless!!! Any idea? from the first Easy Link I got a configuration on a pen flash drive, and everytime I restart, I use it, but it is not automatic like it used to be on my older router. Besides the fact that I have to have the computer wired to get it wireless, which is absurd. Thanks if you can help
    Alfredo

Maybe you are looking for

  • Authority Check in Class Interface CMD_EI_API

    I am using the class CMD_EL_API in order to create new customer. The class is working very well, but there is a problem. Not all the users that are going to utilize this aplicacion can have access to XD01 and XD02 and the class check the authorizatio

  • I've got certain letters and I need to make words out of them

    You know how in Word or some other program if you start typing a word the computer comes up with all the possible words you could be typing and displays them (sort of)? I basically am making a program that does that. So I've got "aek_sla_asdg_ojw..."

  • General questions about mac

    hello, I like to know if mac has also the same windows restore point ,if yes where is that 2- what are the command  line tools of mac , are they the same as windows or they are different? 3- can I install trial of mac if there is one on windows 8.1 h

  • Ie02 tcode HELP

    Hi experts, In IE02-> location tab,where i can find the address details(name,street,location)? Any FM existing for this details? Thanks Kaki

  • How to upload iPad photos to Mac Desk top

    I have a number of photos located in iPad photo album and need to transfer them to my Mac Desk Top OS X 10.7, can this be done in lieu of sending  photos via email?      Walt